Cisco Firewall :: PIX 506e - Cannot Browse Startup
Mar 11, 2013
I just got a PIX 506e from a friend that was not longer using it. I'm trying to get started with the configuration page. I've reset it to factory defaults, rebooted and connected up ethernet. I can ping the device at 192.168.1.1 and access it via console. I browse the site https://192.168.1.1/startup.html, get the invalid ssl certification, get a login prompt (user/pass) and as the document says I leave it blank. As soon as I hit ok it goes to the 404 error Page Not found.
View 4 Replies
ADVERTISEMENT
Mar 4, 2011
How to configure SSH access on my PIX 506e. I would like to use local authentication with no AAA server. Also I would like to have telnet disabled completely.
View 3 Replies
View Related
Mar 17, 2013
There is a PIX 506E and ASA5510, with different connection to service provider. Problem is Apple remote users can't access resources protected by the PIX506E. Apple users can access resources protected by ASA5510. Physically the PIX and ASA are in close proximity with no physical connections. Is it possible for Apple users to authenticate with the ASA and the traffic get routed to and get authenticated by the PIX, inorder to access resources?Due to bandwidth restrictions, a DMZ on the ASA will not be created at this time inorder to consolodate firewalls. Currently 2 x T1 is the connection between ASA and ISP; 1 T1 connects PIX to ISP.
View 1 Replies
View Related
Nov 19, 2012
I have a PIX506E that was resently reset and it has version PIX Version 7.1(2) . It either uses some different commands or I am not using them correctly. [code]
View 2 Replies
View Related
May 4, 2013
So i got a Cisco PIX 506e from a friend and want to set it up for a VPN. Though i cant download the PDM (PIX Device Manager) since i dont have a Contract or something like that. So i cant set it up.
View 1 Replies
View Related
Apr 29, 2012
I need to replace an ageing PIX 506e with an ASA 5505.The current setup looks like this: The PIX is used for site-to-site VPN connection via the WAN 2 link. The WAN 1 link is used for general Internet connectivity.I don't have access to the Draytek Router as it is supported by a 3rd party, but I believe it uses static routing to direct the relevant traffic to/from the PIX.
When I replace the PIX with the ASA, the inside i/f connection experiences dropouts - but no errors show in the logs.The only significant difference I can see in the config is that the ASA utilises VLans for the inside & outside interface configs - I used the PIX-to-ASA Migration tool to make the initial configuration on the ASA.In tests, if I only connect the inside i/f of the ASA, pings from the LAN are stable. Once I connect the outside i/f, pings timeout approx 80% of the time.
View 2 Replies
View Related
Jan 10, 2011
I am new to the PIX firewall. And recently implemented the PIX 506e in my network. I wants to know how we can monitor the system that is generating the more traffic on Network through Firewall.
View 4 Replies
View Related
Mar 5, 2011
I am trying to add a username to the local database for remote VPN connection but always i get this error when I add,Encrypted password is of incorrect lengthUsername addition failed.
View 1 Replies
View Related
Mar 22, 2011
What is the easiest way to restore my config? I backed it up yesterday with my tftp server. Today I made some changes and messed some things up and need to restore the config from yesterday.
View 1 Replies
View Related
Feb 26, 2013
I'm getting an error message on my 506E that is saying not enough flash space to install the new version 8 software. I did a clear flashfs command and then tried again but get the same error. Do the PIX 506E can be upgraded from version 6 to version 8? I am trying to install pix804-28.bin.
View 3 Replies
View Related
Feb 27, 2012
I have a problem with PIX 506E that meets the version 6.1, and in an simple computer network equipment seems to behave in strange ways because some web sites do not open or very open slow thereby its operation impracticable. On the other hand other web sites open normally.
Querying the web site of the Cisco, I found several documents discussing the same problem but in a later version ( 7.0 ), not in this version 6.1.
I've tried removing the pix from the network , not the error occurred, again insert pix however tested only with a machine, without the rest of the network and the problem persists
View 13 Replies
View Related
Sep 20, 2012
I like to set up a pix and router for this network for a small buss, but I need to know what type of cable do I need to set this connection to work straight through or a cross over cable? also I need a subgestion if a nat would work better on the pix or leave it on the router?
View 4 Replies
View Related
Sep 20, 2012
So I was doing some testing with my BB Playbook where I wanted to see what outside connections it tried to make during startup and whatnot. I have a pix 506e running 6.3(5). I created an simple 'deny ip any any' access list on the inside interface so that the Playbook doesn't actually make any connections, but I set up a 'capture' on the inside interface accepting 'ip any any' to see what kind of traffic I could see heading outbound from the Playbook. Well, it started off showing attempts to query DNS (and failed, naturally), but then after a couple of minutes, it tried to connect to a couple of IPs over port 443 and actually got a response!!! For the life of me, I can't figure out how this can happen. NO traffic should be allowed outbound due to my explicit 'deny' rule, but for some reason some traffic on port 443 made it past the firewall and got a response back. There are no other rules in the access list except the 'deny' rule. My PIX configuration is quite simple and I cannot see anything that would allow the Playbook traffic to circumvent the access list.
I've come to think that either RIM has found away around Cisco access-lists, or there is a bug in the Pix OS. I know it's an old appliance/OS, but still. I wouldn't think it could be THAT easy to bypass the firewall.
View 4 Replies
View Related
Dec 16, 2012
I am running the Startup Wizard from my browser as I do not have a Console Access for a brand new CISCO ASA and I am stucked with the User? Password ? I tried many combination and nothing worked.
View 1 Replies
View Related
Jun 17, 2012
I have pair of ASA 5550 and I am trying to copy a new config to my member1 (active) as the new configuration I want to use for the pair. I want to copy this to start-up config on member1 and then reload member1 and have it copy the same config to member2 (stdby). I guess I am trying to understand if I copy the configuration to member1 and reload it, member 2(stdby) will have become active and try to copy the old configuration to member1 which I do not want.
get the commands straight that I need to execute to make sure the new startup config gets to both members without being overwritten?
View 1 Replies
View Related
Feb 14, 2013
I have installed ASA 5510 to limit sessions of Users to 170. But as soon as i put it infront of network before router, Internet goes down and i cannot browse or something.
The network is simple, Cisco three layer model with users on Wired LAN/Wireless LAN using WLC. Approx 2500-3000 users.
[code]...
View 5 Replies
View Related
Apr 20, 2013
Port forwarding done to a DMZ located server on the cisco ASA 5520. Now this host cannot browse but allowed outside to inside access is possible Is there anyway i can give this system to browse internet? may be through the natted IP ( 94.20.*.*)
View 2 Replies
View Related
May 19, 2011
I just installed a new ASA 5505 for an office with three internal subnets. The three networks can each get online fine and ping eachother, but cannot browse to shares on the two internal networks other than their own. How do I configure the ASA to allow all traffic between these three inside networks?
192.168.152.0
192.168.152.0
192.168.154.0
[code]....
View 21 Replies
View Related
Feb 1, 2013
From home I would like to browse my intranet at work where I have a Linux box, which I will call "W", i.e. url...My router at home closes port 22 but maps port 2222 to port 22 on my server "S" which resolves to mydomain.org.
My main machine at home, "M", is where I do my work from home. I thought this might work: [code] On M I tell firefox that S:6666 is the proxy for all sites like url...
So far my browser on M cannot find the intranet web sites with this scheme.How do I make this work? What can I use to debug this
View 3 Replies
View Related
Nov 10, 2012
I recently deployed this module on Cisco ASA 5520 (v8.2.5) at a client's place. I'm having problems. Even if there's 1 user, browsing Internet is super slow. If I were to bypass the CSC SSM (for 10 users) module by removing the "service-policy TEST interface inside" command, browsing Internet is very fast. Based on my troubleshooting, if I were to disable Web Filtering, Web Reputation and URL Blocking & Filtering, and leave all other services enabled, then the browsing is fast. how come I enable the 3 services stated above and browsing the Internet is slow, even for 1 LAN user. I don't have any thing configured under these 3 services. Just by enabling the services alone, it's already slow. It doesn't make sense for Cisco to sell such an expensive product and it can't even handle 1 user with no settings but services enabled.
View 5 Replies
View Related
Feb 20, 2012
it is possible to enable Xauth on pix. I have read multiple threads about using the following cmds:
username test123password testing privilege 2
aaa-server LOCAL protocol local
crypto map mycrypto client authentication LOCAL
However the f/w wont let me add the crypto map cmd, just comes back with the following:
PIX(config)# c.rypto map mycryptomap client authenication LOCAL
Usage: [ show ] crypto { ca | dynamic-map | ipsec | isakmp | map | sa } ...
show crypto engine [verify]
[ show | clear ] crypto interface [counters]
I also tried the following, but they dont work and I am not sure if they are meant for Xauth since I was under the impression that it had to be enabled globally.
PIX(config)# vpngroup test authentication-server LOCAL
Protocol "local" is not supported for authentication of remote users of a h/w client
PIX(config)# vpngroup test user-authentication
[code]....
View 3 Replies
View Related
Oct 28, 2012
I seem to be having an issue with my PIX configuration. I can ping the VPN client from the the internal network, but can cannot access any resources from the vpn client. [code]
View 4 Replies
View Related
Jul 7, 2011
I have 2 firewalls in my network: ASA 5505 and PIX 506E. Both firewalls's internal network is in the 192.168.0.0/24 subnet but their external addresses are different of course. The inside IP for ASA 5505 is 192.168.0.254/24 whereas the PIX is 192.168.0.1/24. I've successfully configured VPN on the ASA 5505. I'm able to VPN to the ASA and can ping / access hosts that have the 192.168.0.254 as their gateways.However, I'm unable to ping/access hosts behind the PIX. What do I need to do in order to allow access to the network behind the PIX after I VPN to the ASA? Also, I'm unable to ping 192.168.0.254 after I VPN to the ASA.
View 5 Replies
View Related
Apr 2, 2012
I am trying to give a vendor VPN access so that they can remotely monitor and diagnose their installed heating and cooling equipment. I dont know where to start and I apologize in advance for my ignorance. I am technically savvy but i have no Cisco knowledge base.
It is a PIX 506e firewall with PIX v6.3.
View 1 Replies
View Related
Apr 7, 2010
I trying to do password reset on a 506e that I got with the current password unknown. I've gone to the Cisco URL for the reset: [code]
I am using the correct bin file as I checked with my pix version. Also I CANNOT ping the firewall from a PCor system on the network, but CAN ping everthing from the PIX.I've tried using interface 1 but no go. Also I've checked the TFTP software (Solarwinds) is running fine and I've unblocked it in XP's firewall.
View 2 Replies
View Related
Feb 5, 2011
So I have a Cisco PIX 506e that I've modified a bit, but am quite happy w/ when it comes to performance and configuration (I can actually set up the VPN server w/o too much thought.) I also have a Mikrotik Routerboard 750, I'm no longer using it as my router due to a few config issues I had plus the fact I had to hard code my internet gateway's arp address into the device due to some issues.
What I am wanting to do, which I'm sure is possible and easily accomplished (I just don't have the time right now to try it) is set the routerboard up behind my pix and have it function as an ipv6 router, while the pix handles my ipv4 duties. I've already set up the routerboard w/ an ipv6 tunnel broker when I had it running as my router, I am just curious if it will work in a similar fashion when configured behind an ipv4 device.
View 2 Replies
View Related
Dec 14, 2011
i'm looking to change my pix 506e for an rv042,is it a bad move or a good move ? is the rv042 much better than the 506e? i want to change to an rv042 because it's easier to manage! 506e is currently doing this :
-firewall for a web hosting company (7 servers)
-2 vpn tunnel
-one-to-one nat.
performance side : is the rv042 much better than the 506e? should i pick up an rv082 or an rv016 ? are they much better than the rv042 ?
View 2 Replies
View Related
Nov 19, 2012
don't have an option to connect a console cable to my cisco router. The usb to serial converter will not work in windows7 only on XP.have physical access to my 881 Cisco Router. If I remember correctly these routers have a default ip address. This router is brand new, out of the box. I am thinking I can access it with the correct IP via network instead of console.
View 7 Replies
View Related
Feb 18, 2012
i wanna ask a question regarding automatic startup on lms 4.1, i have installed my LMS 4.1 on esxi 4.x . but recently my server sometimes down because the electricity problem. and when my friend push the power button to start the server, the LMS is not automatically active. is it possible to make it automatically active soon after my server power up ?
View 3 Replies
View Related
Mar 8, 2011
The IT department in my university has installed enternet 300 on all of our pc's - we have to use this to log into the inter/intranet on the campus. According to them, it is not possible to have the computer automatically log onto the system. I looked into the program, however, and found a place to put ip addresses, account and password. Note: the IT department in my school works hard but it not known for developing complete knowledge about the platforms they work on - there are many.
Is this correct is it possible to put the program in the startup folder and let the computer log on automatically? To be honest, even though most systems on campus us win 2000, I thought win 2000 had the ability to do this (log on to a network) natively, so I am a little puzzled as to why they have this on the computer.
View 1 Replies
View Related
Apr 21, 2012
My old wireless card I took out demands these files when I log onto administrator. I have a new usb wireless card and I want the old card to stop bothering me when I restart/start/logon my cpu.the filert61.sys on ralink wireless lan installions disk is neededthere is a browse button set to c:program filesmsimsi wireless lanardinstallerwinxpI no longer have an msi folder in program files. I don't see it show up under add/remove programs in control panel. Under device manager there are three network adapters: my current wireless usb
View 1 Replies
View Related
Apr 22, 2012
When I fire up my PC, I cannot connect to the internet. Everything is plugged in properly, and I can ping my router and get a reply. I can even get on the internet just fine wirelessly with my netbook. To get the internet to work on my desktop, I have unplug my cable, disable my adapter, plug it back in and enable it.
View 19 Replies
View Related
Dec 20, 2010
When trying to start CiscoWorks Daemon Manager i get the following message:"The CiscoWorks Daemon Manager service on local computer started and the stoped. Some services stop automatically if they are not in use by other services or programs."I have tring starting the service from DOS also and get,E:Program FilesCSCOpxsetupsupport>net start crmdmgtdThe CiscoWorks Daemon Manager service is starting.The CiscoWorks Daemon Manager service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534.
View 11 Replies
View Related
