Cisco :: How Many IPM Collectors Run On LMS 4.1 With 100 Device License
Dec 28, 2011
I have installed lms 4.1 on a customer but could not find on the documentation how many IPM collectors can be run based on the device count license.I found only a scaling table on the Installation Guide but does not says if its tied with the device count license.
Below what I found on the Installation guide:• You can manage a maximum of 2000 collectors on enabling all the device management functions including IPSLA Performance Management functionality. This collector limit includes:
– 1500 collectors (hourly polling frequency)
– 500 collectors (minute polling frequency)
• You can manage a maximum of 5000 collectors on disabling other
device management functions and managing the IPSLA Performance
[code]....
View 1 Replies
ADVERTISEMENT
Aug 29, 2011
In previous LMS versions the DCR could hold more devices then the licenses of the other other applications permitted and using the "user defined fields" we have used it as a general device repository for some customers, pushing only the supported cisco devices to the various applications.In LMS 4 cisco has removed all allocation possebilities from the various applications and replaced it by an all or nothing type of allocation.Does this now mean that any entry in the DCR is automatically counted as a used device license?
View 1 Replies
View Related
Nov 1, 2011
I used to have this situation where I need to replace faulty ASA5510 (this FW did not failover to standby FW) with the new one.
But the problem is the new ASA5510 came with Base License only not with Security Plus License which is needed to allow this brand new device to be configure failover.
how do I pull out Security Plus License from old FW and switch it to new FW (Base License) and activate to Security Plus License.
View 5 Replies
View Related
Apr 30, 2012
Is it possivble to have 10 security licenses, license to a Cisco 5510 and have them transfeered to a Cisco5520?
View 1 Replies
View Related
Jan 15, 2012
The installation of an ACE-4710 throughput upgrade license licence (ACE-AP-02-UP1) failed with an error message :CH01AC03/Admin# license install disk0:ACE20111213081741975.lic.Installing license... failed: No space left on device. [code]
View 4 Replies
View Related
Oct 16, 2012
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies
View Related
Apr 3, 2013
I’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
View 3 Replies
View Related
Jan 3, 2013
We are using LMS 3.2.1 with SP1 and Campus Manager 5.2.2.Server runs Windows 2003 R2.Everything runs fine except for User Tracking on two Catalyst 6500 switches running CatOS. These devices are discovered, reachable, SNMP works fine, neighbors seen. But when we try to launch acquisition, the UT utility complains with this error message:"Failed to start acquisition: Device unreachable. Please enter a valid device."When we wanted to add ports via Device Trap Configuration, LMS has fired a different error message: "There are no ports to configure for the selected device(s).Check whether you have selected any router(s)." I have checked the portsData.xml file, which doesn't have any ports included for the two devices: [code] We have tried to exclude / include the switches in the data collection, but that didn't work.
View 3 Replies
View Related
Nov 30, 2011
My BEFSR81 is my primary router and has DHCP turned on. The router's DHCP range is set to accommodate 12 devices. I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table. I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go. I would like to be able to tell which printer is which when I am looking at the DHCP device table. How can I get a names associated with each printer's IP address in the router's DHCP device table? (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)
View 1 Replies
View Related
Feb 11, 2013
The problem: I need to track a bus from city to city in real time.I'm thinking of a gps device without screen or apps, it only sends the current location to a server. Is this possible? What device can be useful?
View 1 Replies
View Related
Apr 4, 2012
I would like to know if it is possible to purchase a Cisco Prime LMS 4.2 licence but use it to download and run LMS4.0. The reason for asking is we wish to run Windows Server 2003 not 2008 and LMS 4.0 is end of sale already so we can't purchase any version that will run on 2003.
View 4 Replies
View Related
Dec 19, 2012
Is it possible to get a PAK back from a license? For example, if the PAK is joined with the wrong serial number is there a way to revert the binding of the PAK and serial to get just the PAK again?
View 5 Replies
View Related
Aug 7, 2012
i have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.
View 1 Replies
View Related
Dec 3, 2012
Can I bind SSL license key from 1 ASA to another , we recently got 5540 and i want to use my SSL 5510 license on the new firewall
View 1 Replies
View Related
Jul 10, 2011
I purchased Product # FL-WEBVPN-10-K9=
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages. How do i actually activate and use this license? The router is already setup for the SSL vpn. It just doesn't connect. I am assuming it is because i have no license installed?
View 1 Replies
View Related
Dec 6, 2011
I have cisco asa 5505 Base Line .. so i want to buy the license key to get more features . so what is the requirments and how i can buy .
View 1 Replies
View Related
Nov 16, 2011
We have LMS 4.0.1 with 300 devices license and we want to upgrade it to 4.1, pls. let me now if it's free or any cost is assocated with it.Earlier when we directly installed LMS 4.0 license on 4.1, it was not accepting.
View 1 Replies
View Related
May 25, 2011
The license has been installed onto the router. Here is the relevant out from the show license all:
License Store: Primary License StorageStoreIndex: 0 Feature: ipbasek9 Version: 1.0 License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: MediumStoreIndex: 1 Feature: WAAS_Express Version: 1.0 License Type: Permanent License State: Active, Not in Use License Count: Non-Counted License Priority: Medium
WAAS license as it says that this is not in use, WAAS under the interface is not possible.
View 1 Replies
View Related
Dec 12, 2011
If i require ACS 5.3 in HA. Do i need to procure two ACS with the add-on licenses?
View 1 Replies
View Related
May 31, 2012
i have two asa runnig 8.4 configured as Active/Standby Now i received a new Anyconnect license, how do i install the new license?Install the activation key on the Active and Standby unit.Install the activation key on the Active unit only.
View 1 Replies
View Related
Aug 16, 2011
I want to configure IOS SSL VPN on C1941 Router. let me know if any additional License is required for that.
View 1 Replies
View Related
Aug 10, 2011
I have a ASA5550 setup with two boxes in HA.I have purchased AnyConnect Essentials for 5000 users for both boxes.The box runs 8.4.2.I tried on one box to enter new activation key and rebooted the box. Still the output of show version is the same !? [code] If I re-enter the key it says same as running key.I then tried downgrade to 8.2.5, same same show version output.
View 6 Replies
View Related
Apr 24, 2012
One of our clients is going to install WCS on a Vmware machine and uninstall it from the physical server. He wants to know if he can use the same license or get another one; since he will get a new Mac address with the new VmWare machine.
View 1 Replies
View Related
Jan 10, 2012
i have CSC-SSM-20 i want to renew the license to support 750 users for 3 years if i have base license only and if i have base and plus as bundle?i want to know the steps and also the part numbers and what is the difference between these two part numbers
ASA-CSC20-750UP-1YASA 5500 CSC-SSM-20 750-User w/ Plus Lic. Renewal (1-year)
ASA-CSC20-750P-1YASA 5500 CSC-SSM-20 750-User Plus Lic. Only Renewal (1-yr)
View 2 Replies
View Related
Jan 11, 2012
Can i buy a plus license for asa 5520??
View 2 Replies
View Related
Sep 6, 2011
I have purchased a PAK for my 2 cisco 1921 routers .I would like to to configure IP SEC or SSL for VPN connectivity on the routers. How do i convert the PAK into a license?
View 1 Replies
View Related
Mar 25, 2013
My customer is asking to see the license for the SSM-10 card how do i access the card to show this information. the Firewall unit has a base licence installed.
View 2 Replies
View Related
Mar 26, 2012
i have cisco 880 with NPE licence, but i need encryption on this device. I change IOS to c880data-universalk9-mz.151-3.T1.bin, but i still have NPE License and only Evalution without NPE. How can i have permanent license?
show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: advsecurity_npe Version: 1.0
License Type: Permanent
License State: Active, Not in Use
[code]....
View 3 Replies
View Related
Apr 2, 2013
I have ASA5540 with 1000 SSL-VPN License, then I would like upgrade from 1000 to 2000. Which part I have to add between
L-ASA-SSL-1000=
L-ASA-SSL-1K-2500=
ASA5500-SSL-1000=
View 1 Replies
View Related
Jan 16, 2012
I am proposing the Cisco Prime LMS 4.1 (i.e LMS-4.1-500-K9); Do I need to add the HUM license for monitoring or does that come inbuilt?
View 1 Replies
View Related
Dec 26, 2012
we are installing cisco Prime NCS 1.1 and we are facing some issue for License.
I would like to clarrify the below licneses.
L-WCS-NCS1-M-K9
L-PINCS11-300-U
L-PINCSW11-300-U
View 2 Replies
View Related
Mar 14, 2012
if we are upgrading from lms 3.1 to 3.2, can we use the same license file of 3.1?
View 4 Replies
View Related
Nov 15, 2012
We are currently preforming the upgrade from WCS v.7.0.230.0 no NCS 1.1. When we select the Lic file we get an error message "Unable to add any license without an NCS (L-NCS-1.0-K9) license." The file name is WCSUPG20121115142018448.lic.
View 2 Replies
View Related