Cisco Routers :: Do SA500 Series Firewalls Support BGP Routing
Feb 5, 2012Do the SA500 Series Firewalls Support BGP Routing?
View 3 Replies
ADVERTISEMENT
Cisco Routers :: SA500 Not Work And Gets Auto Reboot
May 27, 2013My IPSEC tunnel regulary doesn't work, and the only way is to reboot the SA520.
Is it possible with a batch or something else to auto reboot the SA520 ?
Cisco Routers :: Does The RV180 Series Support 6rd
May 10, 2012I'm considering upgrading a small business to the newly released RV180 or RV180W.Does the RV180 series support 6rd (IPv6 rapid deployment?).I see 6rd documented in the other small business routers (e.g. RV110), but I can't find it in the RV180 documentation.
View 1 Replies View RelatedCisco Switching/Routing :: 3560-C Series L3 Switches Support OSPF?
Jul 16, 2012OSPF normally only comes with IPservices image and not IP Base image. The 3560-C series data sheet says that it only suport IP Base image, yet it mentions that support for OSPF in included. Are there any restictions in the OSPF support?.
View 7 Replies View RelatedCisco Switching/Routing :: Does 2600 Series Switch Support 802.1x And DHCP Snooping
Feb 14, 2012does Cisco 2600 series switch support 802.1x and DHCP snooping?
View 6 Replies View RelatedCisco Switching/Routing :: Does The 22xx Series FEX Support Static Or Dynamic LAGs Between Itself And A Server
Nov 18, 2012Does the 22xx Series FEX support static or dynamic LAGs between itself and a server?Imagine a server with dual 10G NICs, and I need to connect them to the SAME 22xx FEX....can I set up a LAG between the two 10G NIC ports and two 22xx FEX Host ports? Does it depend on how the FEX is connected to the parent 55xx?
View 0 Replies View RelatedCisco Switching/Routing :: Does Supervisor 720 Support All Existing Catalyst 6500 Series Interface
Feb 12, 2013Q. Does the Supervisor 720 support all existing Cisco Catalyst 6500 series interface and services module, protecting customer investments?
View 1 Replies View RelatedCisco Switching/Routing :: 6509 Series Switches Support VSS Active-Active Chassis
Feb 7, 2012The 6509 Series Switches support the scenario VSS Active-Active Chassis, I would like to setup both switch's as one virtual switch but working at the same time, not with Active - Stand By Chassis.
My plans it to create PortChannel accross both Switches 6509 in order to have 2 links one connected to one slot/switch and the other connected to slot/switch in the second 6509 for servers redundancy.
Cisco Routers :: How Does Quality And Longevity Of SRP500 Series Compare To RV Series
May 27, 2012My Draytek 2710 just dies after 2 years so I was looking for something a little more reliable and noticed the spec of the SRP527W-U.I take it with only one antenna and reading a couple of past discussions, the wireless will only manage n-lite as some people call it i.e. 150Mbps, and not the full 300? Oh, and are the ports still only 100M and not Gig?I know the 547 would tick both these boxes but we are talking twice the price. How does the quality and logevity of the SRP500 series compare to the RV series (which would need an adsl modem) or the Linksys boxes?
View 1 Replies View RelatedCisco Switching/Routing :: CLI Configuration Of 800 Series Routers
May 1, 2013I've goggled and searched here, and I can't seem to find what I'm looking for. I need to make a couple changes to a clients Cisco 800 series router, enable ping replies add ip addresses to the ssh ACL.I can't seem to find any basic commands for CLI anywhere.
View 2 Replies View RelatedCisco WAN :: REP Support On 6509 Series?
Sep 6, 2012Any plans to support REP on the 6500 series?We have Sup 720 with MSFC3.
View 1 Replies View RelatedCisco :: Why No Support For 3560 Compact Series In CNA
Jan 9, 2012Is there reason why WS-C3560C-8PC-S and WS-C3560C-12PC-S is not supported in Cisco Network Assistent? According to the data sheets for these switches CNA should be supported. I saw another forum post stating that the Gigabit versions has been added to the supported list as of version 5.7."The Cisco Catalyst 3560-C and 2960-C Series compact switches offer both the traditional Cisco CLI for detailed configuration and Cisco Network Assistant software, a PC-based tool for quick configuration based on preset templates."
View 2 Replies View RelatedCisco Switches :: 200 Series SNMP Support
May 28, 2013Am I correct in thinking that 200 series swiches now support SNMP using v1.3?
View 1 Replies View RelatedCisco Wireless :: AP Models Which Support 5500 Series?
May 25, 2012are there any AP models which support 5500 series and dont support 4400 series. Actually we are looking to get some new AP with higher bandwidth and External Antenna How to differentiate between AP models with clean air feature supported and not
View 5 Replies View RelatedCisco WAN :: 2921 ISR G2 Series BGP IPv6 Support Required
May 24, 2011I was slightly dissapointed with the performance of the "pre-sales" phone number of Cisco in the Netherlands so I am asking it here instead.We decided on using 2 Cisco 2921 routers with 2.5GB ram to use for a MultiHomed connection using BGP. We already have our v4 and v6 space assigned as well as our AS number. The connections should turn up soon.What I could not find out with proper certainty on the Cisco Feature Navigator is if the IP BASE on the Cisco 2921 supports both IPv4 and IPv6 routing combined with BGP. This model uses the Universal IOS licensing which I found slightly confusing. I could not find a simple matrix with the supported commands either.
View 1 Replies View RelatedCisco Wireless :: 2500 Series Support Mobility Groups?
Dec 1, 2011Do you know if the new 2500 series controller supports things like mobility groups? Could I use 2 of these and do inter-controller roaming. Also do you know if this would work with a 2106 controller and a 2505 controller or are they 2 completely independent controllers only knowing about their own APs??
View 12 Replies View RelatedCisco Wireless :: Does 2500 Series Controllers Support Redundancy
Apr 12, 2012Does 2500 series wireless controllers support redundancy?
View 1 Replies View RelatedCisco WAN :: Does ASR 1000 Series Support DMVPN Hub And Key Server In GetVPN
May 12, 2009Does ASR 1000 Series support DMVPN Hub, and Key Server in GETVPN.
View 2 Replies View RelatedCisco :: When Will Campus Manager 5.2.1 Support 2960S Switch Series
Sep 29, 2011When will Campus Manager support the 2960S switch series?
View 2 Replies View RelatedCisco Wireless :: 3600 Access Point Series Will Get An Add-on Module To Support 802.11ac
Oct 23, 2012I noticed that the 3600 access point series will get an add-on module to support 802.11ac. This standard will support more than 1 GBit/s.But the 3600 series still do only have got one GBit port. Any extended information about 802.11ac in the upcoming Cisco portfolio?
View 8 Replies View RelatedCisco WAN :: Will 2600 Series Router Support 10Mb 10 / 1000 Traffic From New Modem
Jun 26, 2012We are upgrading our incoming Internet service from 30 Mb 10/100 to 100Mb 10/1,000.Will my 2600 series router support the 10Mb 10/1,000 traffic from my new modem?Do I need to change my interface speed from 100 to 1,000? I to be sure my router will support the upgrade. [code]
View 8 Replies View RelatedCisco WAN :: 6500 Series Router Support Supervisor Module Redundancy Like 7304 Does
Jan 24, 20131) Does the 6500 series router support supervisor module redundancy like the 7304 does? IE, can I put two identical sup720 modules in the chassis for failover?
2) Can I use any ethernet interface on any line card on the 6500 series for router interfaces? If not, which line cards work as router interfaces?
3) Differences between the 6500 series and the 7600 series? Can I use a sup720 modules from a 6500 in a 7600?
Cisco Firewall :: 5510 / Adding AIP Firewalls To Existing CSC Firewalls Setup?
Mar 3, 2011I have a customer with active/standby on a pair of 5510's with the CSC modules. They were inquiring about the AIP/ASA, and since this would NOT work in their current setup, would getting a pair of 5510/AIP configured for transparent failover work placed in front fo the existing units? Would I need to have a switch placed between the AIP and CSC ASA's? Or would I setup the ASA's for context based Active/Active failover to interconnect the ASA's to the existing units, but I still see a need for a switch.
View 1 Replies View RelatedCisco Firewall :: SA500 ProtectLink URL Filtering Categories / Sub-Categories
Aug 24, 2012I have been looking for documentation that explains the categories and subcategories within ProtectLink URL filtering
View 3 Replies View RelatedCisco Routers :: RV180 - Custom Firewalls Rules Including Between VLANs
Aug 6, 2012Our firewall just died - it was a windows server 2003 rackmount running Microsoft ISA server. I'm shopping for a replacement, but would like to get an appliance rather than have to purchase a whole server, which just seems like overkill.
We had four network ports on the old box - one for internal, one for the cable modem, one for guest wifi, and one for the VPN (We have a dedicated Barracuda VPN appliance, so we won't be using the VPN functionality on whatever new router we purchase)
What we'd like to do is have a set of rules similar to what we had on the ISA server. We denied everything by default, and then for example: Allow outgoing HTTP, HTTPS, FTP access from guest wifi and internal network to the internetAllow access from the VPN subnet to certain ports on certain machines on the internal networkForward incoming access from the internet on port 443 to the VPN boxetc.
From reading the manual for the RV180, i could get a rough configuration going by putting internal, guest wifi and VPN on different VLANs, and disabling inter-VLAN routing for the guest wifi. However this doesn't get me the detailed control that I am used to - guest wifi and internal would be able to see the whole internet, and the vpn would be able to see anything on the internal network.
Does the RV180 can actually give you this level of control? What would be the most cost effective router from Cisco that could do this for me?
Routers / Switches :: How To Install Two Wireless Routers In Series
Dec 31, 2012The first router is wired to the DSL modem and works just fine as an access point with Internet access. The second router is wired from the first router using one of the 4 ports on both router hubs. The second router is visible but has no Internet. How to configure the second router regarding DHCP, LAN, WAN, DNS etc.
View 3 Replies View RelatedBelkin Routers :: N300 - Connecting 2 Routers In Series?
Dec 29, 2012I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
View 1 Replies View RelatedCisco Routers :: What CPU / Processor Is Used By SRP 500 Series
Nov 24, 2011I'm just courious as to the platform specs of the SRP500 series routers. What processor is used, how fast is it and how much RAM and flash do they have?
View 4 Replies View RelatedCisco WAN :: POE Option On 880 Series Routers?
Jul 4, 2012Does the two listed POE switch ports on the 880 series routers are active out of the box (default) or is configuration or extra parts required as internet pictures appear to show what looks like a power connector new to the POE ports?
View 8 Replies View RelatedCisco Routers :: What About Ipv6 On Srp500 Series
Jun 4, 2012Tomorrow 2012-06-06 is ipv6 launch day, what about ipv6 on srp500 series ? On product specification cisco wrote : IPv6 (RFC 6204) ready.
View 10 Replies View RelatedCisco Routers :: Using RV042 In Series With Another Router
May 16, 2012I have been able to put two Linksys routers in series no problem but this doesn't seem to work with an RV042.I have a number of customers that need to connect to a private email network via a router based VPN, but since VPN traffic is not filtered in the firewall, I would like to use an older Linksys router to manage the VPN(s) and have it pass data in through the filters of an RV042 on the DMZ port.I am getting stuck on the very frist part of this. Although I can connect to both the RV042 and LinkSys directly (by adjusting my subnet), I cannot ping the Linksys when it is connected through the DMZ port even if I disable the RV042 Internet port.
I know both the Internet and DMZ ports work on the RV042. I suspected that perhaps the RV won't pass through private IPs and tried known available pubic IPs instead of the 192.168.2.x subnet, but still no ping.What would be limiting the RV in this case? Is is possible to setup the RV to work in series with another router? Is there any other way to filter VPN traffic?
Cisco Routers :: Difference Between Family Series SA 520 / SR 520
Aug 4, 2010What is the difference between the family series SA 520 and the family series SR 520?, technically of course.
View 4 Replies View RelatedCisco Routers :: Connecting 800 Series Through A Sr520?
Jan 12, 2012i have a demroom set up which includes a sr520 as the edge router connecting to the ISP and i have a uc 560 connected to that which is working fine i also have a new business edition 3000 and a 800 series router which im looking to connect to the sr 520 for access to the ISP as the 800 series doesn't have a ADSL line on it .i have given the 800 series routers wan interface a static address of 192.168.75.14 wich is from the address range in the sr520s default vlan and excluded the address from the DHCP pool. now from the ccp express on the 800 s i can ping the wan port of the 800 s and the default vlan/gateway of the sr520 and the wan ip of the sr520 but no further also once i try pinging it from the cmd on windows i cant ping any further that the wan interface on the 800 s .
View 2 Replies View Related