Cisco Routers :: Quick VPN Client Cannot Connect To RV042

Apr 7, 2012

PID VID : RV042 V03
LAN IPv4/ Subnet mask : 192.168.0.7/255.255.255.0
Working Mode : Router
 
[code]...
 
PPTP working fine but not with Quick VPN .. test on some computer and internet access still can not get connect to router.

View 79 Replies


ADVERTISEMENT

Cisco Routers :: Unable To Access LAN Behind RV042 From Quick VPN Client?

Aug 22, 2011

Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
 
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.

View 1 Replies View Related

Cisco Routers :: Cannot Connect To WRVS4400N Using Quick VPN Client

Oct 6, 2011

Quick VPN and have not had any success connecting with our router.  Below is my components info. Cisco router:   WRVS4400N, Firmware V2.0.0.7.  The router is behind a Comcast SMC business gateway modem Remote computer:  Window 7 Ultimate 64 bit
 
I downloaded the Quick VPN client 1.4.2.1, and installed the client successfully but cannot connect using the VPN Client Account that I had set up in the router.  Below are several questions that I hope to understand.
 
1) Do I need to configure specific ports for VPN in the Comcast gateway firewall?

2) What IP address do I put in the Quick VPN client profile when I connect remotely?  The WRVS4400N modem shows 2 IP addresses in the Status:

DNS1:  68.xx.xx.176
DNS2:  68.xx.xx.132

Are these the IP that go into the "Server Address" on the Quick VPN client profile? and which one of the two?   or do I use the static WAN IP address provided by my Comcast account?

3) In the Quick VPN client window, what is the "Use Remote DNS Server" mean?

4) Do I need to create a client certificate from the WRVS4400N for the client

5) Is there any setup needed for the remote firewall (if the client is behind a home wireless router and modem, for example)?

View 3 Replies View Related

Cisco Routers :: RV042 Quick VPN Does Not Disconnect

Mar 3, 2011

we bought a router for our company RV042, so far good
 
What i did:
 
1. i created QuickVPN clients, droped in certificate which exported from router
 
******NOTE********All company's laptops are running: Windows 7pro 32bits****************
 
The users are connecting sucesefully to router and using resources from server etc...
 
But, when they press disconnect on quickVPN it shows disconnected, but when i log in into router, i still see that they are connected (not disconnecting),
 
and the problem is they cannot connect to router second time if i don't manually disconnect them from rv042 router....
 
Only sometimes the clients disconnect properly from router, but it is very very rare...
 
Question1: Where I should look for the problem in router rv042 or client laptops?
 
Question2: Does the 64bit windows7 pro OS can connect to RV042router?
 
I have latest quickvpn software and latest router firmware.

View 10 Replies View Related

Cisco Routers :: Rv042 Quick VPN Windows 7 Unable To Access Network Shares Or Ping

Nov 26, 2011

I have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc via the IP address. It has Norton Antivirus and Windows Firewall. This remote PC replaced a Windows xp PC that allowed access to the shares. I have tried access with a Windows XP Pro and Windows Vista Home Premium PC. Neither have worked.

View 1 Replies View Related

Cisco Routers :: RV042 VPN Client Access Not Able To Connect Two Users At Same Time

Mar 14, 2012

I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running Win XP PRo SP3.

View 1 Replies View Related

Cisco Routers :: Working Configuration To Connect IPad VPN-client To RV042

Nov 11, 2010

Any working configuration to connect the iPad VPN-client (IPSEC) to the RV042?

View 16 Replies View Related

Cisco Routers :: RV042 VPN Client Access Not Able To Connect Two Users At Same Time

Mar 15, 2012

I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running WinXPPRo SP3.

View 4 Replies View Related

Cisco Routers :: Can't Get Quick VPN To Connect To 120w

Jan 29, 2011

For the life of me I can’t get my quick VPN client to connect to my Cisco 120w. I have IPSec gateway to gateway setup and working just fine. I made my quick vpn client under vpn tab. I enabled remote management. Every time I try to connect I get the failed to establish connection. Using the same quick VPN software I can connect to a rv082 with no trouble.

View 2 Replies View Related

Cisco Routers :: RV180 Quick VPN To Connect

Aug 6, 2012

I'm having issues getting QuickVPN to connect. I think it's an issue pinging the gateway but I'm not 100% sure. We are using Comcast Business, I have placed the RV180 in the DMZ. The setup looks like this: Internet -> Comcast router -> RV180 (DHCP) -> rest of network.

View 5 Replies View Related

Cisco Routers :: Set Up RV042 As VPN Gateway For Client

Aug 29, 2011

I set up an RV042 as a VPN gateway for a client a year ago. It is running firmware 1.3.12.19-tm (Feb 13 2009 13:03:21). I created a new certificate. When I download the client certificate, It comes as a .zip file. One the can not be opened by a zip utlity (windows, Winzip or 7 zip). It looks like I can just rename the file to a .pem file, but I want to make sure that is right. They were getting QuickVPN timeouts, but that looks like it was fixed in 1.3.13.

View 3 Replies View Related

Cisco Routers :: RV042 - QuickVPN Versus Standard VPN Client

Nov 15, 2011

I have a RV042 router setup with Client to gateway VPN access, and am connecting with a W7 PC running QuickVPN. We have many PC's that already have the standard CiscoVPN client on them, is it possible to configure the RV042 to allow these clients to conenct? I'm not sure how to get the Mutual authentication to work, or how to import the PEM certificiate into that client. It seems to allow it to import, but I can never select it.

View 2 Replies View Related

Cisco Routers :: RV042 Can't Get Forwarding / Firewall And Client To Gateway VPN

Jun 9, 2012

I'm trying to set up a RV042 to do the following:
 
1) Block all WAN connections, except for:

2) Allow all port 80 connections, and forward to 10.4.20.60

3) Allow all port 443 connections, and forward to 10.4.20.60

4) Allow port 22 connections from specific IP addresses, and forward to 10.4.20.60

5) After a remote client has connected using Client to Gateway VPN, allow that remote client to access anything on the LAN
 
I'm able to do #1-4 above, but I can't get #5 to work. Or I can get #5 to work, but can't implement the restrictions I need in #1-4. Attached are some relevant screenshots. I think the problem is that I have Forwarding rules set up that require me to have a firewall rule to Deny All Traffic from WAN1 (unless I'm specifically allowing it). In the Access Rules screenshot, rule #6 is the problem. If I enable it (thereby denying all WAN1 traffic), then VPN clinents can't access anything on the LAN. However if disable this rule, VPN clinents can access anything on the LAN, but the firewall also opens up all outside connections to SSH, since that's set up in the Forwarding rules. I would have thought that once a remote client is connected using client to gateway VPN, then that client is considered to be on the LAN, as far as the firewall is concerned. Thus a firewall rule (like #6) that is specified for WAN1 shouldn't effect remote VPN clients.

View 1 Replies View Related

Cisco Routers :: Will RV042 Work With AnyConnect Secure Mobility Client App

Jun 15, 2012

Will the RV042 work with theAnyConnect Secure Mobility Client app?  If so, is there and app note available?  If not, which routers wil work with this app?

View 5 Replies View Related

Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?

Jan 27, 2012

I am setting up remote access using an RV042 router.  Using quickvpn or a client-to gateway vpn and shrewsoft client,  I can only access/ping the LAN side of the remote router and one machine on the remote network.  The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
 
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.

2)  The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.

View 2 Replies View Related

Cisco VPN :: RV042 Quick VPN Windows 7 64 Without Windows Firewall

Aug 29, 2011

I have an RV042 setup for quick vpn access.The remote computer in question is a win 7 64bit. The PC uses McAfee SAAS firewall. This disables the windows firewall.
 
1. I can connect to the vpn with SAAS disabled and windows firewall enabled.
2. I cannot connect to the vpn with both windows firewall and SAAS disabled.
3. I cannot run SAAS and windows firewall together to check if this would work.
 
I need to figure out what windows firewall is doing to allow the vpn to connect, and so how do this with windows firewall disabled. I can then leave the windows firewall disabled and enable McAfee SAAS.The message quickvpn provides when it fails to connect is that the remote gateway is not responding. The client logs show that the tunnel had been opened but it was unable to ping.

View 2 Replies View Related

Cisco Routers :: 1194 Ports Used By Quick VPN

Nov 1, 2011

we recently bought a new desktop firewall solution from McAfee and I can't seem to get our VPN to work. I allowed QuickVPN in the firewall and additionally opened port 1194, 1720 and 1723 - but that does not do the trick. Once I turn off the firewall and use Windows Firewall instead it works.

View 2 Replies View Related

Cisco Routers :: Can't Connect With RV042 VPN

Jan 14, 2013

I have a Cisco RV042 VPN Router and I have added a group vpn, but when I am trying to connect I got an error that the remote vpn server isn't responding.

Here's my log:
 
2013/01/15 12:24:53 [STATUS]OS Version: Windows 7
2013/01/15 12:24:53 [STATUS]Windows Firewall Domain Profile Settings: ON
2013/01/15 12:24:53 [STATUS]Windows Firewall Private Profile Settings: OFF
2013/01/15 12:24:53 [STATUS]Windows Firewall Private Profile Settings: OFF
2013/01/15 12:24:53 [STATUS]One network interface detected with IP address MY HOME IP

[code]....
 
If I am trying to connect the status of the vpn user in the remote interface is "online".I have deactived my firewall at home and at the server for testing purposes.

View 2 Replies View Related

Cisco Routers :: WRVS4400N And Quick VPN (remote Gateway Not Responding)

Jul 27, 2010

Router is a version 1.1 running with sw version V1.1.13-ETSI
Quick VPN is sw version Ver 1.4.1.2
 
The issue is that I can't connect due to that i cant ping the internal IP, get this error message in the QVPN log  [WARNING]Failed to ping remote VPN Router![URL]I have disable the "Block WAN Request" and it is possible to ping the router on the external site.So as I see it, the router blocks for ping on the internal IP via QVPN, what have I done wrong?

View 20 Replies View Related

Cisco Routers :: WRVS4400n Can Share Accounting Software Like Tally Through Quick Vpn

Jan 22, 2013

can i share accouting software like Tally through quick vpn ? WRVS4400n has been configured on the site . and can connect to the site using quick vpn software without a problem . will Tally work ?

View 1 Replies View Related

Cisco Routers :: Setup RV042 VPN To Connect To Domain

Apr 5, 2013

We are currently running Windows 2003 Domain in our network with DHCP turned on the Server. We have turned off the DHCP on the Router. We are using RV042 as out Gateway to the internet and everything is working fine. We would like to allow a couple of our users to be able to VPN into the network so that they can use Outlook and be able to access their files on the Shared Folder. The users would be using their laptops from their homes to connect via VPN using the standard Windows 7 VPN connection.
 
In the RV042 Interface there are many options and I am not sure I understand which setting would allow them to connect successfully to the network, be authenicated as a domain user.

View 1 Replies View Related

Cisco Routers :: QuickVPN RV042 V03 Some Users Connect Others Can't

Feb 10, 2013

A client of mine has a Cisco RV042 Router. I've configured it to run VPN and it works, sort of. Some clients can connect, others can't, for no discernible reason.

Specific machine issues are Windows 7 x64 or x86, Quick VPN latest release, unobtrusive (Avast or Microsoft Security Essentials) security, etc. 2 separate machines on the same home remote network, 1 can connect just fine, the other can't. My laptop (Win7 x64) connects just fine, one of my techs can connect OK, the IT support guy that works for this client can connect.
 
Particulars of the router: Firmware version: v4.0.4.02;  PID VID : RV042 V03;  Firmware MD5 Checksum :     1f84d8d0a2a8b99f9bfa4409e64547aa

View 3 Replies View Related

Cisco Routers :: Small Business RV042 VPN Cannot Connect To Network

Jul 14, 2012

I am having difficulty with gateway to gateway vpn on RV042.I have site A and site B, both have static IP address,local IP at site A is 192.168.1.0 local IP at site B is 192.168.5.0I have configured each site as directed in the documentation, the sites connect ok within the admin consoles, I cannot browse any resources from either site. Site A is a domain.local and I am part of that domain at site B. I can ping site B local address from site A and vice versa however I can not ping any of the servers or NAS devices on either network. the only device I can ping successfully inside the network is a phone server (splicecom unit).

I have read various posts in the discussion boards but have found no resolve. Internet access is fine from either site. I think that it could possibly be a DNS issue but am unsure, should I add DNS entries in the advanced section, if so what DNS would I enter?

View 5 Replies View Related

Cisco Routers :: RV042 - Connect Remotely To IP Camera / Port Forwarding?

Oct 26, 2011

I've configured my rounter but am having a firewall issue, I think.I'm trying to connect remotely to an IP Camera.I've set the port forwarding on my router for port 8081 to forward to the IP of my camera.I've set the firewall aswell to allow traffic from the WAN to the IP of my camera.

View 1 Replies View Related

Cisco Routers :: RV042 VPN - Create Tunnel But Unable To Connect Using Windows Connection?

Jul 18, 2011

Im able to create a gateway tunnel with two rv042 routers in different locations  ( i can see the tunnel connected in the router) but the quick vpn utility is not working , i also tried to use the pptp as server as an alternative( im able to connect using windows connection to the pptp server but whenever I browse any of the four ip's allowed for the pptp server \10.0.0.200-204 it takes me to the documents of the local computer....I attached the configuration for one of the routers it is the same as the other end , just the information is flipped.
 
Message was edited by: Adrian Torres

View 7 Replies View Related

Cisco Routers :: RV180w To Connect As Client To Remote VPN Gateway

Jun 1, 2013

I'm trying to setup an rv180w to connect as a client to an remote vpn gateway and route all the lan traffic behind it direct to the remote vpn gateway. [code]

View 3 Replies View Related

Cisco Routers :: RVS4000 - QuickVPN Client / Cannot Connect To Drive Or Computer

Sep 1, 2011

I have a RVS4000 router, and using Quick VPN client (latest version, 1.4.2.1?) on a computer with Windows Vista.  I can connect to the router, and I can see computers, and drives on the network. When I click on a drive or computer, I can't connect to the devices.  Local IP address are 192.168.1.x, remote is 192.168.2.x.

View 9 Replies View Related

Connect 2 Dlink Dir615 Routers In Client Mode To Talk?

Mar 14, 2011

Okay so for the past week i have battled with my two routers trying to make them talk to each otherMy main router (router A) is a dlink dir-615 ver. BMy second router (router b) that im trying to make talk to router A is a dlink router dir-615 ver E1 flashed with dd-wrt custom firmware.I have looked at every setup guide people have posted online and youtube videos to no avail

View 6 Replies View Related

Belkin Routers :: N300 Constantly Drops Connection / Doesn't Allow Client To Connect

Dec 29, 2012

I have recently purchased a Belkin n300 wireless N router. The problem is, I have to reboot the thing numerous times throughout the day to allow a client to connect to it via wireless. One client will be connected and then drop, or a client will be connected, and I cannot connect another device. I also had an issue with streaming over wireless for netflix on my devices and the only way I could get it to work was to turn off the firewall, what the hek.... This is crap. I knew I should not have bought a belkin router again. Had one years ago and it constantly gave me issues. Had my Linksys Wrt54G for years with no problems until it finally crapped out. Anyways, my firmware version is the latest version according o the website.

View 6 Replies View Related

Cisco VPN :: Linksys WRT54G To RV042 (Client To Gateway) Access

Apr 12, 2011

We recently upgraded from a Linksys WRT54G router to a Cisco RV042 to gain "gateway-to-gateway" automated VPN access. However, we are unable to get "client to gateway" access working.
 
With the Linksys WRT54G we used a "username" "password" pair for remote client authenication. This worked for both Windows and Mac OS X users using the built-in PPTP client. We found we had to set "encryption" value to "none" on the client side.
 
I am confused by the setup screens on the RV042. It looks like I must setup a "tunnel" (VPN->Client to Gateway), there is (VPN->VPN Client Access) where I can enter a username/password, and also (VPN->PPTP Server) where another username/password pair can be entered. I have tried all sorts of combinations but "no love". I am particularly mystified by the (VPN->Client to Gateway) settings for "Remote Client Setup"; the client can be calling in from anywhere and there is an option for "Dynamic IP + Email Address" but I'm not sure how that maps onto the client (do they use the email address as their account name?). I have also looked at defining a "Group VPN" where I am given other options. But nothing works from the client.
 
I just need to come up with some setup that works, that I can document to both PC and Mac users at a miniumum.

View 1 Replies View Related

Cisco Routers :: Auto / Programmatic UPnP Port Forwarding For RV042 And E4200 Routers

Jan 24, 2013

I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042  router and was succesful ( by typing 192.168.1.1  in the explorer and  logged in using user name and password )
 
I am using a linux embedded system  whose  Internal IP ,Internal port  are mapped  .This system is connected to one of the LAN ports    
 
I want to try auto UPnP port forwarding both for  RV042 router and Linksys E4200 routers 
 
After  enabling the Upnp option only  and logging out ,Can i add a port mapping entry in this router without logging in  using  a  C++ program  which runs on  linux embedded system .

View 2 Replies View Related

Cisco Routers :: RV042 / RV042G / Small Business Routers With Inter-VLAN Capability

Aug 22, 2012

I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?

View 5 Replies View Related

Cisco VPN :: EasyVPN Software Client Should Connect To Client ASA 5505?

Mar 20, 2012

i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
 
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved