Cisco Routers :: RV042 VPN Client Access Not Able To Connect Two Users At Same Time

Mar 15, 2012

I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running WinXPPRo SP3.

View 4 Replies


ADVERTISEMENT

Cisco Routers :: RV042 VPN Client Access Not Able To Connect Two Users At Same Time

Mar 14, 2012

I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running Win XP PRo SP3.

View 1 Replies View Related

Cisco Routers :: QuickVPN RV042 V03 Some Users Connect Others Can't

Feb 10, 2013

A client of mine has a Cisco RV042 Router. I've configured it to run VPN and it works, sort of. Some clients can connect, others can't, for no discernible reason.

Specific machine issues are Windows 7 x64 or x86, Quick VPN latest release, unobtrusive (Avast or Microsoft Security Essentials) security, etc. 2 separate machines on the same home remote network, 1 can connect just fine, the other can't. My laptop (Win7 x64) connects just fine, one of my techs can connect OK, the IT support guy that works for this client can connect.
 
Particulars of the router: Firmware version: v4.0.4.02;  PID VID : RV042 V03;  Firmware MD5 Checksum :     1f84d8d0a2a8b99f9bfa4409e64547aa

View 3 Replies View Related

Cisco Routers :: Quick VPN Client Cannot Connect To RV042

Apr 7, 2012

PID VID : RV042 V03
LAN IPv4/ Subnet mask : 192.168.0.7/255.255.255.0
Working Mode : Router
 
[code]...
 
PPTP working fine but not with Quick VPN .. test on some computer and internet access still can not get connect to router.

View 79 Replies View Related

Cisco Routers :: Unable To Access LAN Behind RV042 From Quick VPN Client?

Aug 22, 2011

Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
 
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.

View 1 Replies View Related

Cisco Routers :: Working Configuration To Connect IPad VPN-client To RV042

Nov 11, 2010

Any working configuration to connect the iPad VPN-client (IPSEC) to the RV042?

View 16 Replies View Related

Belkin Routers :: F5D8636-4 / Parental Control / Client IP Filtering / Internet Access Time Scheduling

Mar 11, 2013

How to configure Belkin N (F5D8636-4) Client IP Filtering so that a range of client IP' deny access to the internet using the following blocked time ranges e.g. Mon 5:00pm to Tues 2:00pm, Tues 5:00pm to Wed 2:00pm, Wed 5:00pm to Thur 2:00pm, Thur 5:00pm to Fri 2:00pm, Fri 5:00pm to Sat 10:00am, Sat 1:00pm to Sun 10:00am, Sun 1:00pm to Mon 2:00pm - BTW - this access regime is to deny internet access for my teenage son?

View 3 Replies View Related

Cisco Routers :: RV042 Hangs Three Or Four Time In Single Day

Apr 18, 2012

We are using router RV042 since last three it's working fine with single broadband connection but when we are using as a load balance it will hanged three or four time in a single day. I have updated firmware also but still my problem is not resolved
 
 Below is my router detail.
CPU: Intel IXP425-266
Firmware version :    1.3.12.19-tm (Feb 13 2009 13:03:21)
DRAM :    32M
Flash :    8M
  
Latest firmware is v4.1.1.01-sp.bin but it will required v3 hardware, I don't know how to check hardware version.

View 1 Replies View Related

Cisco Routers :: RV042 WAN Port Gives Poor Performance Most Of Time

Jan 1, 2013

I have 2 RV042 routers with identical firmware (1.3.13.02-tm) and settings. One router is a backup that sits in a box, but both experience this problem. The WAN port gives very poor performance most of the time. Download speeds range from normal, 25mb, to less than .5mb. Pings from my command prompt or the routers "Diagnostic" page, even to the cable modem, are almost always above 500ms. However, pings to internal resources are fast, usually under 5ms. If I connect my laptop directly to the cable modem I have no speed issues. The problem occurs whether I use WAN1 or WAN2.
 
If I restart the router, speeds are fine for a few seconds and then it begins to slow down like someone is turning down a dial. We also regularly experience a complete internet disconnect quite often, and when it happens, the ping results are the same when it comes back up, almost like the router is restarting itself. [code]

View 1 Replies View Related

Cisco VPN :: RV042 Only One Computer Can Connect At A Time?

Jan 2, 2012

Using RV042 router,have an office with 4 computers XP PRO SP3 and only 2 need to use the VPN connection.problem is each one will connect just fine BUT when one is connected the other will not connect untill the other is disconnected.have another office with very similar setup (same quickvpn client) (same router)and i have 2 computers connecting at same time just fine.have checked all i can think of.

View 2 Replies View Related

Cisco Routers :: Set Up RV042 As VPN Gateway For Client

Aug 29, 2011

I set up an RV042 as a VPN gateway for a client a year ago. It is running firmware 1.3.12.19-tm (Feb 13 2009 13:03:21). I created a new certificate. When I download the client certificate, It comes as a .zip file. One the can not be opened by a zip utlity (windows, Winzip or 7 zip). It looks like I can just rename the file to a .pem file, but I want to make sure that is right. They were getting QuickVPN timeouts, but that looks like it was fixed in 1.3.13.

View 3 Replies View Related

Cisco Routers :: RV042 Fails To Obtain WAN IP Address Infinite Lease Time

Aug 24, 2011

I just got a new RV042. V3 Hw.For setup and testing before putting it in action, I've attached the WAN1 side to my internal network.But it fails to get an IP address, and the log shows: "Infinite lease time, exiting".My current router on the LAN is giving out DHCP addresses with 3 hour lease time, and I've checked with the PC's on the LAN that this is correct.The routers DHCP status shows that the lease time for the RV042 is 3 hours ahead.So why does the RV042 complain about long lease time ?Is there a way to avoid this error from occurring?
 
I have tried to change from 'Gateway' to 'Router', but this does not change anything.Also tried a factory reset, with no luck.Fw is upgraded to the latest 4.0.4.02

View 2 Replies View Related

Security / Firewalls :: VPN Client Users Cannot Access LAN?

Jul 23, 2012

I configured a dynamic vpn(easy vpn) in a cisco isr. But the vpn clients cannot access any of the lan devices. VPN pool is 10.0.0.1- 10.0.0.20 & internal netwrk add is 172.17.x.x. I tried to disable zone based firewall but no resultout[CODE]

View 1 Replies View Related

Cisco Routers :: RV042 - QuickVPN Versus Standard VPN Client

Nov 15, 2011

I have a RV042 router setup with Client to gateway VPN access, and am connecting with a W7 PC running QuickVPN. We have many PC's that already have the standard CiscoVPN client on them, is it possible to configure the RV042 to allow these clients to conenct? I'm not sure how to get the Mutual authentication to work, or how to import the PEM certificiate into that client. It seems to allow it to import, but I can never select it.

View 2 Replies View Related

Cisco Routers :: RV042 Can't Get Forwarding / Firewall And Client To Gateway VPN

Jun 9, 2012

I'm trying to set up a RV042 to do the following:
 
1) Block all WAN connections, except for:

2) Allow all port 80 connections, and forward to 10.4.20.60

3) Allow all port 443 connections, and forward to 10.4.20.60

4) Allow port 22 connections from specific IP addresses, and forward to 10.4.20.60

5) After a remote client has connected using Client to Gateway VPN, allow that remote client to access anything on the LAN
 
I'm able to do #1-4 above, but I can't get #5 to work. Or I can get #5 to work, but can't implement the restrictions I need in #1-4. Attached are some relevant screenshots. I think the problem is that I have Forwarding rules set up that require me to have a firewall rule to Deny All Traffic from WAN1 (unless I'm specifically allowing it). In the Access Rules screenshot, rule #6 is the problem. If I enable it (thereby denying all WAN1 traffic), then VPN clinents can't access anything on the LAN. However if disable this rule, VPN clinents can access anything on the LAN, but the firewall also opens up all outside connections to SSH, since that's set up in the Forwarding rules. I would have thought that once a remote client is connected using client to gateway VPN, then that client is considered to be on the LAN, as far as the firewall is concerned. Thus a firewall rule (like #6) that is specified for WAN1 shouldn't effect remote VPN clients.

View 1 Replies View Related

Cisco Routers :: Will RV042 Work With AnyConnect Secure Mobility Client App

Jun 15, 2012

Will the RV042 work with theAnyConnect Secure Mobility Client app?  If so, is there and app note available?  If not, which routers wil work with this app?

View 5 Replies View Related

Cisco Routers :: Quickvpn / Client To Gateway Vpn Rv042 Can Only Ping Router?

Jan 27, 2012

I am setting up remote access using an RV042 router.  Using quickvpn or a client-to gateway vpn and shrewsoft client,  I can only access/ping the LAN side of the remote router and one machine on the remote network.  The PPTP server and native Windows 7 connection provide access to all machines on the remote network.I have 2 possible reasons for this and would like to find the real reason:
 
1) The remote RV042 is behind another router, and that router restricts access other than the PPTP traffic.

2)  The VPN tunnels other than PPTP only allow access to the remote LAN side of the router and remote machines that have the remote router defined as their gateway in the IP configuration.

View 2 Replies View Related

Cisco VPN :: Linksys WRT54G To RV042 (Client To Gateway) Access

Apr 12, 2011

We recently upgraded from a Linksys WRT54G router to a Cisco RV042 to gain "gateway-to-gateway" automated VPN access. However, we are unable to get "client to gateway" access working.
 
With the Linksys WRT54G we used a "username" "password" pair for remote client authenication. This worked for both Windows and Mac OS X users using the built-in PPTP client. We found we had to set "encryption" value to "none" on the client side.
 
I am confused by the setup screens on the RV042. It looks like I must setup a "tunnel" (VPN->Client to Gateway), there is (VPN->VPN Client Access) where I can enter a username/password, and also (VPN->PPTP Server) where another username/password pair can be entered. I have tried all sorts of combinations but "no love". I am particularly mystified by the (VPN->Client to Gateway) settings for "Remote Client Setup"; the client can be calling in from anywhere and there is an option for "Dynamic IP + Email Address" but I'm not sure how that maps onto the client (do they use the email address as their account name?). I have also looked at defining a "Group VPN" where I am given other options. But nothing works from the client.
 
I just need to come up with some setup that works, that I can document to both PC and Mac users at a miniumum.

View 1 Replies View Related

Cisco Routers :: 887VA Cannot Expect Client To Make Change Every-time

May 16, 2013

I have a curious issue on a customer site where the above components are installed.The issue being that the iPhones the users utilise cannot connect to the mail server via WiFi, they are forced to connect with their 3G connection. The core issue seems to be the 887VA, as when I've installed 'lesser' branded ADSL routers, the connection seems to be fine.The iPhones are set to access the mail server via the URL: mail.customer.com. Should I change this to the internal IP of the server 192.168.12.200, the mail connection works fine. However I cannot expect the client to make this change every time they arrive or leave the office. Presently I have them disable WiFi when on premises.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 3415 - Users Access Our Site Using VPN Client Connecting To ASA5550

Jun 3, 2013

I currently have a Cisco ACS 3415 appliance with 5.4. Coming from the ACS 4.2 world, I'm have a bit of a struggle creating the following and I was hoping if I could be shown clear steps I can duplicate the rest.
 
I want to creat a group ie: AIRTEMP with access time from 7:00am to 5:00pm and add 2 users to the group.
 
Users access our site using a vpn client connecting to a ASA5550. The ASA and the ACS already communicate with each other.
 
The ACS 5.4 user guide has me bouncing all over different page.

View 5 Replies View Related

Cisco Routers :: RV042 - How To Allow Facebook Access Between 12 And 1 Pm Only

Jan 12, 2011

I have been trying to resolve this issue with only allow facebook access throug the content filter between 12pm and 1 pm.  However The settings never seem to take. Is this a bug in the system?  If I start the filtering from 1300 to 1200 that should allow facebook to be accessible only on lunch.

View 2 Replies View Related

Cisco Routers :: Access RV042 Through Telnet?

Jun 20, 2011

I am trying to access my RV042 through telnet. I go to http://192.168.1.1/sysinfo123.htm?ConsoleSimulation=1
 
which enables telnet. However when I type my username and password it will not authenticate.

View 16 Replies View Related

Cisco Routers :: Can RV042 Access The Internet

Jul 9, 2012

I am new to implementing VPN service.  What I would like to do is  install a RV042 or RV082 (for added speed) and configure it to allow me  to access the Internet (from home base) through the VPN from any  location  while on the road and using my laptop.  My questions are: Can this be  done?  If so, what needs to be done in the configuration to allow gateway  access to the Internet? I can't find any reference in the Cicso  documents, but somewhere I saw that it can be done.  I don't care about  accessing anything on the local LAN.  As I would be using the same  Internet connection for the VPN and the access to get out----how would  this affect speed?  I plan to use Quick VPN as the client, and haven't  even touched the client issue. 

View 5 Replies View Related

Cisco Routers :: Cannot Access VPN Anymore From RV042

Jun 8, 2012

I had this problem where 2 users could only access my RV042 vpn one at a time
 
The Linksys solution was to give these 2 users a RV042 as well. That worked, 2 can access my vpn at the same time. We use QuickVPN for this purpose
 
But now there users cannot access another Cisco vpn any more in our office. I attach a schematic and a screen shot of the error when trying to connect to the professional vpn  with vpn client version 5.0.07.290

The 2 notebooks epresent the 2 users
The one at the bottom is my vpn
The connection on the left is the professional vpn
 
We now use remote desktop to my vpn to get to the professional vpn, that work but we don't like it

View 2 Replies View Related

Cisco Routers :: RV042 - Allow LAN To Access Internet?

May 2, 2012

I configure my new purchase RV042 router, in Access Rule i Deny all services the source is Lan and destination is WAN. my concern is i want to allow LAN to access internet, so i'ved create another rule which allow http, https. but my problem is i cannot access internet.

View 4 Replies View Related

Cisco Routers :: RV042 - Access Web Admin

Jun 12, 2012

brand new RV042 client (tried MacOS and Win7 on two laptops) will get IP from DHCP and shows correct IPs for gateway etc. - however entering the IP 192.168.1.1 to access web admin does not work (tried current versions of Firefox, safari and Firefox); browser is not offline router was reset to factory setting (by pressing reset for over 30sec) ping on IP above works
 
hardware broken?

View 3 Replies View Related

Cisco Routers :: Can't Connect With RV042 VPN

Jan 14, 2013

I have a Cisco RV042 VPN Router and I have added a group vpn, but when I am trying to connect I got an error that the remote vpn server isn't responding.

Here's my log:
 
2013/01/15 12:24:53 [STATUS]OS Version: Windows 7
2013/01/15 12:24:53 [STATUS]Windows Firewall Domain Profile Settings: ON
2013/01/15 12:24:53 [STATUS]Windows Firewall Private Profile Settings: OFF
2013/01/15 12:24:53 [STATUS]Windows Firewall Private Profile Settings: OFF
2013/01/15 12:24:53 [STATUS]One network interface detected with IP address MY HOME IP

[code]....
 
If I am trying to connect the status of the vpn user in the remote interface is "online".I have deactived my firewall at home and at the server for testing purposes.

View 2 Replies View Related

Cisco Routers :: RV042 Group VPN And Access Rules

Sep 10, 2012

I've setup a GroupVPN and connect to the RV042 with the Shrewsoft VPN client, works like a charm as opposed to QuickVPN ;-)The firewall is configured with an explicit deny rule for RDP access to an internal server, also an explicit allow rule is created for certain IP numbers as source. I noticed that I need to create an explicit allow rule for the subnet the Shrewsoft client is using for the virtual adapter or I will not be able to access the internal server via RDP through the GroupVPN tunnel.  I would think that setting up a tunnel defies the rules created for direct access on the WAN port.

View 5 Replies View Related

Cisco Routers :: RV042 - VPN Access Resources With Same Subnet?

Aug 24, 2011

I have an RV042 with the PPTP server configured, which is working because I can connect with my iPad and droid phones, however, I'm unable to access resources on the RV042 side (192.168.1.X) when my local network is the same ip scheme (192.168.1.x). It works fine when I'm on a different network like 3G or someone else's Wifi network (192.168.11.X).

View 1 Replies View Related

Connect To Two Routers At The Same Time?

Apr 20, 2011

I have a wireless router in my house/office which allows everyone to print to a wireless printer and used to supply acces to the internet. Recently I purchased a 4G Internet card from Verizon (wireless connection for up to 5 devices) which works very well but when I am connected to it I cannot print to the wireless router. Is there any way to be able to connect to two routers at the same time?

View 11 Replies View Related

Cisco Routers :: RV042 - Setup Of VPN Using QVPN To Access Vista?

Jul 12, 2009

I am trying to setup a VPN using an RV042 (fw ver: 1.3.12.6) to access a VISTA computer over the internet using a laptop using QVPN's latest version. I finally got it to connect but then hang's with error " Gateway is not responding, do you want to wait?". If I say yes it go through the login again and hangs. If I say no, it hangsup. I've tried a couple different ideas using tunnelling and static IPs in the router but nothing. All I want is to be able to access one computer through the RV042 over the internet from any other computer using the QVPN.

View 6 Replies View Related

Cisco Routers :: RV042 - Limiting HTTP Access By IP Address?

Feb 22, 2013

I am trying to limit HTTP access to my server on the local network to a specific IP address.  I create an Access Rule in the firewall section, however that doesn't work.  The only way it works is if I add the internal IP address of the server to the Forwarding section where I create a new HTTP forwarding rule.However, that is not good because that allows ALL HTTP traffic to that server instead of just by the single IP address.

View 2 Replies View Related

Cisco Routers :: Static IP Addresses Don't Have Internet Access (RV042)

Feb 12, 2012

I've installed RV042 for a client of mine. For next two months everything worked without any problems. The issue I've been experiencing lately is when I assign a static IP address to the PC it won't have internet access. Once I allow it to have a dynamically assigned IP then it works fine. The IP I assign isn't part of the DHCP range.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved