I have a wireless router in my house/office which allows everyone to print to a wireless printer and used to supply acces to the internet. Recently I purchased a 4G Internet card from Verizon (wireless connection for up to 5 devices) which works very well but when I am connected to it I cannot print to the wireless router. Is there any way to be able to connect to two routers at the same time?
View 11 RepliesI have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running Win XP PRo SP3.
View 1 Replies View RelatedI have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running WinXPPRo SP3.
View 4 Replies View RelatedI have a computer & Bluray..should I use router to be able to use bothe at same time?I have a single port dsl line..or should I get a mulit port "modem/router"?
View 1 Replies View RelatedI have one Cable Modem/Router built in (Netgear CGD24N) and I wish to use two routers (the other being the DIR-655). The Netgear is a fantastic Cable Modem but a ****py router, but I wish to use both. One will be situated upstairs and the other downstairs.I have connected the two at different locations via the wall and the DIR-655 successfully went to the Netgear login page (as I went to 192.168.0.1) but internet connection was not working, whereas the Netgear internet was working. This was connected LAN to LAN.
Another procedure I have tried was connecting to them LAN - INTERNET (INTERNET being the D-link one) and received the following message: "The addressing of the Internet side learnt thru DHCP conflicts with the addressing selected for the LAN side. Internet communications will be disabled until you have changed the LAN side addressing to resolve the problem."
I have 2 network adapter on my PC , but i cant use this 2 internet connection at a time, these connections are taken from main router. is it possible to increase my internet speed ? . i can use each connection seperatly, if one connection remove another will work,
View 2 Replies View RelatedI have two routers one is a o2 router which is for the internet (broadband) the other is an old bt home hub which i have connected to the printer via usb. In order to print a document at the moment i have to disconnect my laptop from the broadband router and connect it to the printer router.Is there any way that i can connect to the two router s at the same time so that i while printing i can still keep my internet connection.
View 1 Replies View RelatedHad laptop connecting wirelessly perfect with no problems. We then added another laptop and PSP 3 to the house hold. Any of the 3 devices will connect to the internet via wireless but ONLY one at a time. If you are connected with one and turn on one of the others it will kick the one off that you were on and only 1 device can use wireless at a time?
View 4 Replies View RelatedI'm new to networking (at least at this level) and need some guidance. First, I have an Actiontec MI424WR (Rev. F) Coax Verizon Fios modem that I use as my home networking wireless router. From a LAN port on that I've connected a cable to the WAN port on my DIR-655 which acts as my gigabit office hard wire/wireless router. I need to keep the home network and the office network separate.All of my computers are Windows, either 7, Vista or XP.Connected to my Dir-655 on the office network are 2 wireless computers, a printer, an IOMEGA 1TB Home Personal Cloud NAS HDD, plus 2 desktop computers.The DIR-655 is set with a static IP address matching the range of the Actiontec. The DIR-655 is set for DHCP for the devices on the network (although 2 of the computers have static IP address).
When the DIR-655 had a Dynamic IP address set by the Actiontec, the IOMEGA NAS HDD kept losing connection with all the devices on the network. Only after I set the DIR-655 to static IP did that stop and everybody started to play nice. I'm not sure why that would make a difference, but it did.But regardless of whether it is set to dynamic or static, no computer on the network or program, even third party programs, can connect to ANY of the time servers out there... and I mean any of them. I've tried at least 20 or more of the standard and not so standard ones. The DIR-655's time is off, and it is set to get time automatically. None of my computers, or my IOMEGA NAS, can access time. The Actiontec, though, seems to be set correctly.Everything connects to the internet just fine. Web, email, auto product upgrades. Fine. So far it's just the time server thing which troubles.I done everything I know how to do to enable Port Forwarding through both routers for NTP > UDP 123 since that is the standard port for the Network Time Protocol, but I could have easily screwed that up.
Can't use internet and phone at the same time on the N150 router. On DSL and whether on the DSL line or using VOIP when using the phone the internet goes down.
View 9 Replies View RelatedI just upgraded the firmware on the RV220W to 1.0.2.4 and it looks like the time is not updating. I tried a couple of different default time servers and also a custom time server (time4.nrc.ca).
View 2 Replies View RelatedWe are using router RV042 since last three it's working fine with single broadband connection but when we are using as a load balance it will hanged three or four time in a single day. I have updated firmware also but still my problem is not resolved
Below is my router detail.
CPU: Intel IXP425-266
Firmware version : 1.3.12.19-tm (Feb 13 2009 13:03:21)
DRAM : 32M
Flash : 8M
Latest firmware is v4.1.1.01-sp.bin but it will required v3 hardware, I don't know how to check hardware version.
Cisco RV016 MultiWAN router.I have it connected in a small business setting with about 70-80 devices. Network is: 2 x DSL Modems. RV016 Router...Cisco 300 Series Switch - >3 more cisco switches connected...AP's.Running a 192.168.0.0 network.The web interface is down half the time. The router needs to be reset in order for me to access it again. Usually the login page appears but when I try to login the page does not leave the login area, only a small spinning icon beside the login area.Sometimes the page for DHCP status cannot be accessed and a reset is all I can do to access the router again.
Internet seems a little slow at times too.We were running the Netgear FVS336G before this and I wanted to move to the RV016 and have capability of more than two WAN's, plus have everything Cisco of course.
N-Wireless modem Router F5D-8636 will not let me change the lease time from half an hour?
View 1 Replies View RelatedWe are a medium-large sized company with approx.100 offices located across North America. Every single office connects to each other and the data center via a DMVPN overlay network. The DMVPN hub router (Cisco 2951), R-Q9-1, is located at our data center and is the "workhorse" of the company. We also have a redundant hub router, R-Q9-2, at the data center with exact same hardware specs.
Each office builds an EIGRP Tunnel0 and Tunnel1 to R-Q9-1 and R-Q9-2 respectively. All data traffic flows over Tunnel0 to R-Q9-1 until it fails, at which point traffic starts to flow over Tunnel1 to R-Q9-2. This has been working seamlessly for last 1 year of implementing this design, until yesterday, when both R-Q9-1 and R-Q9-2 rebooted all of a sudden at the same time right in the middle of a production day. I confirmed there was no power failure at the data center. A show version of both routers gives me this:
R-Q9-1 uptime is 1 day, 1 hour, 24 minutes
System returned to ROM by address error at PC 0x5C92E28, address 0x5DF36FE9 at 11:52:23 EDT Tue Sep 21 2010
System image file is "flash0:c2951-universalk9-mz.SPA.150-1.M3.bin"
Last reload type: Normal Reload
[code]...
I Google that error but can't find anything specific other than it's saying it's some kind of bus error. What I also found a bit off is the time it's showing on both routers' show version output (Sep 21, 2010 and Jan 10, 2012). Here are the current clock settings on both routers at the time of this writing.
R-Q9-1#sh clock *16:53:31.216 EDT Wed Oct 31 2012
R-Q9-2#sh clock *16:59:44.220 EDT Wed Oct 31 2012
I checked my Syslog server and did not find anything specific during the time of the crash, however, syslog was filled with errors similar to this one
2469: * Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel: 10.10.200.1 NBMA: IP address ommitted)
[code]...
I have never seen these errors before and all of a sudden they seem to have stopped since this morning.
I have two wireless adapters "PCI Marvell Libertas" and "USB Sagem" and i have access to 2 different AP's, The browsing' seem to be a little slow while i'm downloading', and my work requires lot's of downloading', as i have managed to connect to my two different AP's at the same time, i always feel like i'm usin' only one of 'em, so i was wondering' if i can take advantage of both connection in order to double the speed, and or if there's some way to use one for browsing' and the other for torrent downloads only.i've tried to mount the USB adapter on Linux using' Vmware, but it keeps saying' unable to get IP address,,However that's not the problem,, all i want to know is if there's a way to make both connection work on windows 7 Ultimate X64,
View 1 Replies View RelatedAccess Control on an ac1200 does not seem to flexible enough to include hours from say 8pm - 6am. On my old Linksys I would simply have multiple entries for the same MAC address but this does not seem possible.
View 1 Replies View RelatedWithout my N 450 router hooked up I am getting hardwired speeds of 50/5 mb, but with N 450 hardwired into my PC the speeds drop to 20/5 mb. I have checked DHCP and I am not getting piggy backed. Is it a bottlekneck, misconfigured or just not compatible with Time Warner?
View 1 Replies View RelatedI have 2 RV042 routers with identical firmware (1.3.13.02-tm) and settings. One router is a backup that sits in a box, but both experience this problem. The WAN port gives very poor performance most of the time. Download speeds range from normal, 25mb, to less than .5mb. Pings from my command prompt or the routers "Diagnostic" page, even to the cable modem, are almost always above 500ms. However, pings to internal resources are fast, usually under 5ms. If I connect my laptop directly to the cable modem I have no speed issues. The problem occurs whether I use WAN1 or WAN2.
If I restart the router, speeds are fine for a few seconds and then it begins to slow down like someone is turning down a dial. We also regularly experience a complete internet disconnect quite often, and when it happens, the ping results are the same when it comes back up, almost like the router is restarting itself. [code]
why my device "cisco RVS4000" loses settings after some down time without electricity?
View 2 Replies View RelatedI cant' connect my 2 laptops on the internet at the same time, only 1 laptop can connect on the net and the other one don't or they can both connect to the internet but it doesn't stop disconnecting on both of them.
View 10 Replies View RelatedHow can i connect 2 broadband but 1 ISP provider at single switch hub
View 4 Replies View RelatedOur company just recently bought a CISCO SA520W Security Appliance from a distributor here in the Philippines. Unfortunately, after a month of use, the LAN ports on the appliance started losing power. We reported this to the distributor and they sent a CISCO engineers to check on the unit. The engineers found the unit to be defective and need to be replaced.
Three weeks after the distributor pulled-out the unit, I have followed-up the status with them. They told me that they got no definite ETA from CISCO for the replacement unit. I followed-up with them again after a week. This time, they told me that the device is already in transit and it is coming from CISCO USA but they still don't have an expected time of arrival to give me.Does it really take more than a month for CISCO to replace a brand new defective unit? The serial number of our appliance is DNI1610G0G7.
I have a curious issue on a customer site where the above components are installed.The issue being that the iPhones the users utilise cannot connect to the mail server via WiFi, they are forced to connect with their 3G connection. The core issue seems to be the 887VA, as when I've installed 'lesser' branded ADSL routers, the connection seems to be fine.The iPhones are set to access the mail server via the URL: mail.customer.com. Should I change this to the internal IP of the server 192.168.12.200, the mail connection works fine. However I cannot expect the client to make this change every time they arrive or leave the office. Presently I have them disable WiFi when on premises.
View 1 Replies View RelatedTime shows as: Current Time: 2011/09/03 Sta 20:53:36 (-08:00) "Sta" day? Also, the timezone is incorrect... I did select GMT -8:00 Pacific Time, and also the "Adjust for Daylight Savings time) So, the above time SHOULD be displayed as 2011/09/03 Sat 20:53:36 (-07:00) If the intention is to show the difference from UTC/GMT. I tried the newer version but it's broken big time. :-( I could not use it at all. None of the configuration changes I made would "stick".
View 2 Replies View Relatedi have two networks accessing through Wi-Fi..if u want to access resources of A network from B then what should i do...means i have installed SQL database server on A network & want to access on Network B
View 1 Replies View RelatedI just got a new RV042. V3 Hw.For setup and testing before putting it in action, I've attached the WAN1 side to my internal network.But it fails to get an IP address, and the log shows: "Infinite lease time, exiting".My current router on the LAN is giving out DHCP addresses with 3 hour lease time, and I've checked with the PC's on the LAN that this is correct.The routers DHCP status shows that the lease time for the RV042 is 3 hours ahead.So why does the RV042 complain about long lease time ?Is there a way to avoid this error from occurring?
I have tried to change from 'Gateway' to 'Router', but this does not change anything.Also tried a factory reset, with no luck.Fw is upgraded to the latest 4.0.4.02
Every time I switch on one of our laptops it will not connect, once the router is restarted it works fine. We have 4 other devices which happily connect to the wireless connection first time.
View 2 Replies View RelatedI have two wireless connections at home from 2 different ISPs. How can make my laptop connect to both routers at the same time to make use of them?
View 1 Replies View RelatedI have my PC in my office with two lans,, one, the internal lan of my company with a static ip address, the other one a broadband line for connecting to internet.. If i switch on both the lans at the same time, i am able to use the broadband lan and the internal lan stops functioning,, to make it work i need to disable the lan with broadband line.. i even tried bridging the lans but that again stopped my internal lan. way to connect both the lans at the same time so that both the networks work simultaneously... and if there is any other option to function two lans on a single PC at the same time.
View 19 Replies View RelatedUsing RV042 router,have an office with 4 computers XP PRO SP3 and only 2 need to use the VPN connection.problem is each one will connect just fine BUT when one is connected the other will not connect untill the other is disconnected.have another office with very similar setup (same quickvpn client) (same router)and i have 2 computers connecting at same time just fine.have checked all i can think of.
View 2 Replies View RelatedJust need to know where I can set a Max connect time so users dont camp on the ASA when they are not using it.
View 8 Replies View RelatedI have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View Related