I have two wireless adapters "PCI Marvell Libertas" and "USB Sagem" and i have access to 2 different AP's, The browsing' seem to be a little slow while i'm downloading', and my work requires lot's of downloading', as i have managed to connect to my two different AP's at the same time, i always feel like i'm usin' only one of 'em, so i was wondering' if i can take advantage of both connection in order to double the speed, and or if there's some way to use one for browsing' and the other for torrent downloads only.i've tried to mount the USB adapter on Linux using' Vmware, but it keeps saying' unable to get IP address,,However that's not the problem,, all i want to know is if there's a way to make both connection work on windows 7 Ultimate X64,
I cant' connect my 2 laptops on the internet at the same time, only 1 laptop can connect on the net and the other one don't or they can both connect to the internet but it doesn't stop disconnecting on both of them.
I have a wireless router in my house/office which allows everyone to print to a wireless printer and used to supply acces to the internet. Recently I purchased a 4G Internet card from Verizon (wireless connection for up to 5 devices) which works very well but when I am connected to it I cannot print to the wireless router. Is there any way to be able to connect to two routers at the same time?
i have two networks accessing through Wi-Fi..if u want to access resources of A network from B then what should i do...means i have installed SQL database server on A network & want to access on Network B
Every time I switch on one of our laptops it will not connect, once the router is restarted it works fine. We have 4 other devices which happily connect to the wireless connection first time.
I have my PC in my office with two lans,, one, the internal lan of my company with a static ip address, the other one a broadband line for connecting to internet.. If i switch on both the lans at the same time, i am able to use the broadband lan and the internal lan stops functioning,, to make it work i need to disable the lan with broadband line.. i even tried bridging the lans but that again stopped my internal lan. way to connect both the lans at the same time so that both the networks work simultaneously... and if there is any other option to function two lans on a single PC at the same time.
Using RV042 router,have an office with 4 computers XP PRO SP3 and only 2 need to use the VPN connection.problem is each one will connect just fine BUT when one is connected the other will not connect untill the other is disconnected.have another office with very similar setup (same quickvpn client) (same router)and i have 2 computers connecting at same time just fine.have checked all i can think of.
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
I recently purchased a X2000 ADSL modem/router combination. For some reason the current time will not stay set to the time zone. Rebooting clears the discrepancy for a short time before it drops an hour exactly. I'm in the central time zone and the setting are correct on the basic setup.?
Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time" information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.
I have one 2621 router i want to creat time base access list so that one of my subnet user(10.128.194.0 255.255.255.128) use only internet between 11am to 2pm.
I just bought a WAP321 Wireless AP. I wonder why it cannot sync with our time server automatically. Every time I reboot it, the system time become "Fri Dec 31 1999 12:00:00 UCT". I have to do the sync manually by clicking on the "Save" button under the menu Administration > Time Setting.
When I look at the local area connection the status is acquiring network address and just sits there. When I try to repair, it states that windows couldn't finishing repairing because it can't renew my IP address.
I have to reconfigure the wifi connection everytime a new laptop comes into my house -- and we can only use one computer at a time with this router...huge problem with a big family..
I have configured the "Maximum Connect Time" as unlimited in my group policy but when a connection is established it shows a "Conn Time Out: 120 minutes". The connection does get dropped with this timer. how to actually make it unlimited and why it get sets to 120?I having a problem with SSL phone clients dropping throughout the day and think this may be the cause.
I just got a dir-655 revb, and it does not connect to the internet. I have DSL, and the old router works fine with PPPoE, when I configure my dir-655b router, it can not connect to the internet. I get the flowing error:
info Mar 23 22:31:11 rp_pppoe =' read pppoe_conn_session error or first time dial notice Mar 23 22:31:10 pppd 2.4.3 started by root, uid 0 info Mar 23 22:31:10 RP-PPPoE plugin inform wantimer to reset auth, discovery variable info Mar 23 22:31:10 RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3 info Mar 23 22:31:10 Plugin /lib/pppd/2.4.3/rp-pppoe.so loaded. info Mar 23 22:31:05 Exit.
I have been working on my ASA 5510 version 8.2(1) trying to change the maximum connection time. Originally the custom "Group Policy" for IPSEC (Remote Access VPN) was set to inherit the settings from the default system Group Policy (DfltGrpPolicy). The custom group policy for the sake of this discussion is called "ABCD". I have modified the settings on the default (DfltGrpPolicy) as the custom policy (ABCD) was inheriting the configuration from default to disconnect after 1200 minutes. I changed the setting "maximum connection time" to 1200 minutes. I saved the configuration and what not then connected my VPN client, after two (2) hours I was disconnected. Something just doesn't add up.
I went ahead and deselected all inherited properties and manually configured them for the ABCD custom policy. No longer was the ABCD custom policy configured to use the inherited properties/settings. I saved the configuration again tested but instead of having a 1200 minute connection limit, I have 120 minute connection limit. Inside Monitoring --> VPN --> Sesssions : I can click on my session and see Session details". The Group Policy and Connection Profile properly list the "ABCD" custom profile. However, the "Conn Time Out" setting is: 120 minutes. I am completely stumped as to what is going on.
In the actual running config I see: group-policy abcd attributes banner none wins-server value 123.123.123.123 dns-server value 123.123.123.123 dhcp-network-scope none vpn-access-hours none vpn-simultaneous-logins 3 vpn-idle-timeout 60 vpn-session-timeout 1200
What I need to do next to get this working short of a recycle of the ASA.
AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Ciso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
IOS Version 15.1(2)T2, Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory. DRAM configuration is 64 bits wide with parity disabled. 255K bytes of non-volatile configuration memory. 250880K bytes of ATA System CompactFlash 0 (Read/Write)
My son connects his xbox360 to his laptop that uses a wireless access to the router. My husband and i both have a laptop and when we try to log on to the internet it takes forever or doesn't connect at all while son is on his xbox 360. Do I need to change up my router?
I set up a DIR-655 router for a friend 4 years ago and it's worked reliably with all of their equipment since. They have wireless printers, iMacs, pc laptops and iPhone 4S's, all connecting without any problems. Recently, they got an iPhone5 and it will not connect to their home wireless automatically, they have to re-enter the password each time. They've tested their iPhone 5 on other networks and they do not have to re-enter the password. Apple and ATT are blaming the router. I do not live near them and I'm going to have to facilitate them remotely. At this point, I believe their router is configured with WPA2, but I can't be sure. Which configuration will work with the iPhone 5, as well as their other, older, devices that have worked for 4 years
This is a bit of a pain as the behaiviour is not consistent. whenever I connect to the Device webpage a number of things may happen
1. There is no connection - the page tries to load but never does. While this happens the router drops the ADSL connection and re-connects. I have to close the browser session and try again later. OR
2. The Browser session connects but at some point after the connection, say when I am trying to save changes or even just browsing through the config pages the session hangs, and again the router drops the ADSL connection and re-connects. I have to close the session and try again later.
I have noticed this happens when I use my OpenSuse 11.4 Linux Box using Firefox 5 or even using my Win 7 Box using IE9.
Just got an EA6500 - updated to the latest available firmware.I've attached 2 x WD NAS and 1 x WD via USB to the unit.Everytime AFTER I finished running Time Machine on the MacBookPro (writing to one of the WD NAS), I can no longer login to the router neither from the local IP address nor the cisco cloud connect. The error message that I get (loosely phrased) is: can't connect to Router. Please ensure the router is connected to the internet.
I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running Win XP PRo SP3.
I have a RV042 and have set it up for VPN Client access using the QuickVPN client to connect my remote users. I discovered today that I cannot have two users connect in at the same time. Both users are in the same remote office. They can connect individually with no problem but if one is connected and the other tries connect also the second user gets a message the gateway is not responding. They are both running WinXPPRo SP3.
I use a DSL internet and i am assigned a new ip everytime my modem is restarted. I want to use the same ip everytime either through changing it or any other way. I mean can i use my own ip?
