Cisco Routers :: WRVS4400N And Quick VPN (remote Gateway Not Responding)

Jul 27, 2010

Router is a version 1.1 running with sw version V1.1.13-ETSI
Quick VPN is sw version Ver 1.4.1.2
 
The issue is that I can't connect due to that i cant ping the internal IP, get this error message in the QVPN log  [WARNING]Failed to ping remote VPN Router![URL]I have disable the "Block WAN Request" and it is possible to ping the router on the external site.So as I see it, the router blocks for ping on the internal IP via QVPN, what have I done wrong?

View 20 Replies


ADVERTISEMENT

Cisco VPN :: WRVS4400N / Remote Gateway Is Not Responding

Oct 4, 2010

Im having trouble with getting my VPN to work on my brand new WRVS4400N router. i cant find the solution to my problem, no matter how much i read about it.
 
WRVS4400N:
Firmware Version: V2.0.0.8-ETSI
 
QuickVPN:
Version: 1.4.1.2
 
The laptop im trying to connect to the gateway via VPN is a Windows 7 x64 HP Elitebook 8540p with a internal mobile broadband (HSPA+)So.The scenario is that i've installed the QuickVPN client on my Win7-machine without any trouble.I've created a user in the web-administration of the router.The router is configured to disable "Block WAN requests" in the firewall, apart from that the firewall is on.When trying to connect - with a valid certificate that i created, i get a error message after the dialog telling me "Verifying network":"The remote gateway is not responding. Do you want to wait?".
 
The log.txt tells me:

...2010/10/06 00:00:28 [STATUS]Verifying Network...2010/10/06 00:00:34 [WARNING]Failed to ping remote VPN Router!2010/10/06 00:00:37 [WARNING]Failed to ping remote VPN Router!2010/10/06 00:00:40 [WARNING]Failed to ping remote VPN Router!2010/10/06 00:00:43 [WARNING]Failed to ping remote VPN Router!2010/10/06 00:00:46 [WARNING]Failed to ping remote VPN Router!2010/10/06 00:00:49 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.2010/10/06 00:02:13 [STATUS]Disconnecting...

[code].....

View 2 Replies View Related

Cisco Routers :: RV180 - QuickVPN The Remote Gateway Is Not Responding

Nov 19, 2012

I have a RV180 router and i am trying to use the Quick VPN Client version 1.4.2.1. It works fine on my Windows 7 pc, and worked successfully once on the windows XP sp3 pc. But now the XP pc will not work.
 
What looks strange is in the VPN Client Connection Status on the router I see the status is Online, however the XP pc will not ping anything on the network or connect to the RDP pc i want. The QuickVPN Client hangs on "Verifying Network".
 
I tried the suggestions i saw online:

Disabling Firewall
Enabling Firewall
Making user name shorter
Allowing for PING on WAN (replies all come back fast)
Reboot Router
Upgraded firmware to 1.0.1.9
 
I did not adjust the MTU rate as i was not sure what to change it too. AV is AVG 2012.

View 7 Replies View Related

Cisco Routers :: RVS4000 QuickVPN - The Remote Gateway Is Not Responding

Apr 4, 2012

I am trying to connect with QuickVPN to my RVS4000 in another location. I get this message: "The remote gateway is not responding. Do you want to wait?'

View 15 Replies View Related

Cisco Routers :: RV220W Reports Remote Gateway Is Not Responding

Aug 30, 2011

I've just set-up one of the RV220W VPN solutions. This worked fine for a while, but now it reports the remote gateway is not responding. Other clients can connect, but not the computer I'm using at home.
Log file reports:
 
2011/08/31 21:10:31 [STATUS]Success to connect.
2011/08/31 21:10:31 [STATUS]Tunnel is configured. Ping test is about to start.
2011/08/31 21:10:31 [STATUS]Verifying Network...
[code]... 

I've tried the most common stuff. Enabling ICMP, checked that remote administration runs on port 443, changed MTU to 1400 manually, It allows fragmented packages too. Checked that IKE and IP Sec services are running. I've also tried both with windows firewall ON and OFF. A colleague of mine had the same problem in the same time frame as me, but after a while - he suddenly was able to connect. I still can't!!

Firmware Version: 1.0.2.4 
Edit: IP is not real.   

View 7 Replies View Related

Cisco Routers :: WRV210 - Quickvpn Disconnects - Remote Gateway Not Responding

Oct 2, 2012

We have 2 remote locations that are connecting to a server at our home location.  Each remote computer uses quickvpn utility to establish a vpn with the home location.  Our problem is that sometimes the vpn disconnects while we are working in remote desktop on server 2008.  Luckily our sessions in remote desktop stay put but we lose the vpn connection.  Most of the time we get a message that the remote gateway is not responding.  Our dsl internet connection seems to work and we have previously had no trouble with connecting to the home location.  We have 3 computers that connect simultaneously to the server at each remote location and sometimes one computer will stay connected while others disconnect. 

View 3 Replies View Related

Cisco Routers :: Cannot Connect To WRVS4400N Using Quick VPN Client

Oct 6, 2011

Quick VPN and have not had any success connecting with our router.  Below is my components info. Cisco router:   WRVS4400N, Firmware V2.0.0.7.  The router is behind a Comcast SMC business gateway modem Remote computer:  Window 7 Ultimate 64 bit
 
I downloaded the Quick VPN client 1.4.2.1, and installed the client successfully but cannot connect using the VPN Client Account that I had set up in the router.  Below are several questions that I hope to understand.
 
1) Do I need to configure specific ports for VPN in the Comcast gateway firewall?

2) What IP address do I put in the Quick VPN client profile when I connect remotely?  The WRVS4400N modem shows 2 IP addresses in the Status:

DNS1:  68.xx.xx.176
DNS2:  68.xx.xx.132

Are these the IP that go into the "Server Address" on the Quick VPN client profile? and which one of the two?   or do I use the static WAN IP address provided by my Comcast account?

3) In the Quick VPN client window, what is the "Use Remote DNS Server" mean?

4) Do I need to create a client certificate from the WRVS4400N for the client

5) Is there any setup needed for the remote firewall (if the client is behind a home wireless router and modem, for example)?

View 3 Replies View Related

Cisco Routers :: WRVS4400n Can Share Accounting Software Like Tally Through Quick Vpn

Jan 22, 2013

can i share accouting software like Tally through quick vpn ? WRVS4400n has been configured on the site . and can connect to the site using quick vpn software without a problem . will Tally work ?

View 1 Replies View Related

Cisco Routers :: RV082 Gateway To Gateway VPN Not Resolving Remote DynDns

Feb 14, 2013

I've got two RV082's connected. Each has a dynamic IP (changes typically every few weeks). I've configured the tunnels on both ends with a local and remote "Remote/Local Security Gateway Type" of "Dynamic IP + Domain Name(FQDN) Authentication".If I look at the VPN Summary tunnel status, it shows an IP address of "mydomain.dyndns.org 0.0.0.0" under the "Remote Gateway" column heading. The Tunnel Test "Connect" button is N/A.I can resolve both of the mydomain.dyndns.org entries on both sides of each VPN using the Diagnostic DNS lookup tool within each router. If I hardwire a fixed IP address for the Local and Remote Gateway everything works just fine. VPN is good.
 
I just can't seem to get the "mydomain.dyndns.org" function to work. It appears the router can't resolve the dynamic IP from the domain names on each of the routers.

View 2 Replies View Related

Cisco Routers :: RV042 QuickVPN / Gateway Not Responding

Jun 28, 2011

I have router Linksys RV042 v1.2 with latest firmware Version: 1.3.13.02-tm. And I'm using QuickVPN v 1.4.1.2. I've setup VPN connection with values, below: But every time I'm trying to connect to router by VPN it always popup a window "Remote Gateway not responding".It occurs when I'm trying to connect to VPN behind other router, when I'm connected directly to Internet the connection is established.But I'm connecting to other networks using VPN and it's working properly (behind the same router), so I think it's problem with RV042 configuration but I don't now weher.

View 5 Replies View Related

Cisco Routers :: RV120W - QuickVPN Gateway Not Responding

Jan 1, 2012

I am trying to install a Cisco VPN Router RV120W behind this router. I have setup the Cisco and can access the internet from the device. I also setup the Actiontec router with the DMZ host as the Cisco router. When I try to connect to the VPN tunnel however I connect but receive an "Gateway is not responding" error message after 30sec. Is there anything else I need to setup on the actiontec router to allow VPN passthough or something like that?
 
 
Actiontec Lan IP: 192.168.1.1
Cisco Wan IP: 192.168.1.2
Cisco Wan SN: 255.255.255.0
Cisco Wan Gateway: 192.168.1.1
Cisco WAN DNS: 192.168.1.1
               71.250.0.12
Cisco Lan IP: 192.168.20.1
 
Edit: I have also tried this connection from a Windows 7 Pro with Firewall enabled and also Windows XP with the same error.
 
Quick VPN log:
 
2011/12/30 00:05:58 [STATUS]OS Version: Windows 7
2011/12/30 00:05:58 [STATUS]Windows Firewall Domain Profile Settings: ON
2011/12/30 00:05:58 [STATUS]Windows Firewall Private Profile Settings: ON
2011/12/30 00:05:58 [STATUS]Windows Firewall Private Profile Settings: ON
2011/12/30 00:06:10 [STATUS]OS Version: Windows 7
2011/12/30 00:06:10 [STATUS]Windows Firewall Domain Profile Settings: ON (code )

View 9 Replies View Related

Cisco VPN :: Quick Is Not Connected To WRVS4400n On Windows 7

Mar 27, 2011

I have a WRVS4400N router & am using Quick VPN to connect to the Router. I can able connect through Window XP Machine, but not able to connect through Window Vista & 7. Whenever I try to connect through Window 7, I got this message: The remote gateway is not responding. Right now the Cisco router is behind DSL modem and I can't change the DSL modem to bridge mode as my ISP told me that we can't change DSL modem to bridge mode. what I have to do to connect to the router through Windows 7 & Vista.

View 3 Replies View Related

Cisco Wireless :: WRVS4400N V2.0 Quick VPN Vista X64 Not Connecting

Oct 30, 2010

WRVS4400N v2.0 2.0.0.8
QuickVPN 1.4.1.2
Vista Home Premium SP2 64-bit
 
Trying to connect from laptop through an AP to my WRVS4400N via VPN.  Not having much luck...I get to "Activating Policy..." and then "Connection Error".I like this router thus far, I have been able to set up multiple BSSIDs and VLANs which has been very useful.

View 6 Replies View Related

Cisco Routers :: Using Remote DNS With QuickVPN - WRVS4400N

Dec 11, 2011

I've deployed a WRVS4400N router at one of my clients, however I'm unable to access resources on his network via DNS. I was hoping to use the router for DNS resolution, however when I connect via VPN, I can only connect to shares via IP address.

View 1 Replies View Related

Cisco Routers :: WRVS4400N V.2 - Remote Management Through The Firewall

Mar 21, 2012

I'm attempting to configure remote management (and, sometime soon, SNMP) for a newly-deployed WRVS4400N v.2.At the Basic Settings page, I enabled Remote Management, and left the port # at the default. Remotely I entered the public (static) IP for the router in the address bar of IE8 similar to this: 67.203.???.??:8080. IE8's response is, "The webpage cannot be displayed." I'm using a public wi-fi access point, and don't know how the local router is configured, so it's possible that the local router has a blocking rule in the firewall.I'll try again using another remote router that I manage.

View 3 Replies View Related

Cisco Routers :: Windows RDP Remote Desktop Not Working With WRVS4400N

Nov 16, 2010

I use RDP extensively on my LAN to use and manage 4 PCs running Win XP or Win7. My consumer-grade Cisco Linksys WRT610n crapped out after less than 2 years, so I thought I'd try the Cisco WRVS4400N to gain extra features like VPN. I have not enabled anything new on the router except for adding a second wireless SSID for guest use, although no bandwidth management or VLANs have been set up yet. Firmware version is 2.0.0.8.Since installing this router I have been unable to use Windows RDP on ANY of my computers on the LAN, whether I use the machine name or the IP address. I can ping every device on my network - print servers, NAS boxes, PCs, but no RDP. WHAT'S GOING ON?

View 6 Replies View Related

Cisco VPN :: WRVS4400N VPN IPsec Gateway To Gateway Setup?

Jan 29, 2012

Just bought 3 WRVS4400N, I wanted to setup gateway to gateway VPN.  I followed the instructions on the WRVS4400N admin guide and VPN does not connect.  I also downloaded the VPN setup wizard and that also did get the gateway connected.  Everything seems to be correct.  Do I have to enable anything else?  Firewall setting?
 
Below is my config.
 
IPSec VPN Tunnel: Enabled
Tunnel Name: TUN01 
Local Security gateway: IP only
WAN1 IP: 192.168.100.1
SUBNET: 255.255.255.0
Local Security type: subnet
LOCAL IP: 10.10.10.1
SUBNET: 255.255.255.0

[code]....

View 1 Replies View Related

Cisco Routers :: RV110W Ping Remote Gateway

Apr 16, 2012

I recently purchased a RV110W wireless router for a client.  I am having issues with the VPN access.  Here is the client's access log:
 
2012/04/17 10:59:41 [STATUS]Disconnecting...2012/04/17 10:59:47 [STATUS]Success to disconnect.2012/04/17 11:00:03 [STATUS]OS Version: Windows XP2012/04/17 11:00:03 [STATUS]Windows Firewall is OFF2012/04/17 11:00:04 [STATUS]One network interface

[Code].....
 
I've called Cisco tech support but the answer is disregard the log message and everything is working, and that I have a configuration issue on my end. 

View 2 Replies View Related

Cisco WAN :: 6500 / 3750 - Quick Way To Allow VLAN From Remote Site?

May 16, 2012

We have a need to access an VLAN at the main office( ie Core Switch 6500,switch 3750) from a remote site(Cisco3845 router, Switch3750) connecting by a SP through fibre link.
 
what is the easiest and quick way to do it and the user from the remote site just want to have access to that VLAN for a couple of days only.

View 6 Replies View Related

Cisco Routers :: RV180 PPTP Clients - Using Remote Gateway

Jul 31, 2012

Is there a way to configure RV180 to allow PPTP clients to route Internet traffic via its own internet connection?
 
I.e. supporting these client options: "Send all traffic" (Mac/iOS), "Use default gateway on remote network" (Windows).

View 1 Replies View Related

Cisco Routers :: RV180w To Connect As Client To Remote VPN Gateway

Jun 1, 2013

I'm trying to setup an rv180w to connect as a client to an remote vpn gateway and route all the lan traffic behind it direct to the remote vpn gateway. [code]

View 3 Replies View Related

Cisco VPN :: ASA 5510 - Gateway Not Responding?

May 8, 2013

What this error means from a Cisco VPN client when trying to connect to a ASA 5510?
 
VPN Error
VPN gateway not responding (waiting for Msg 2)

View 3 Replies View Related

Cisco VPN :: QuickVPN - Gateway Not Responding - RV042?

Oct 28, 2011

I'm running Cisco QuickVPN on a clients laptop (Windows 7). Windows firewall is disabled because McAfee SaaS is running.I sometimes have the issue that the initial connection attempt comes back with "Gateway not respoding" during the network verification process. You close the program, you open it again and it works. Sometimes it takes 2 or 3 tries. Today I have the issue that my client tried it like 20 times including several reboots and it's just not working. I tried it from my own computer and it connected fine on the 2nd try.I'm thinking that it might be time-out thing, that the VPN client doesn't receive a response fast enough? I know my clients home internet is darn slow.

View 1 Replies View Related

DNS Server Not Responding And Default Gateway Is Not Available?

Sep 29, 2012

I have been having some trouble with my internet for awhile now. It fine one second and than it will get really slow and eventually stop working. When I troubleshoot to see what the problem is it either gives me DNS server is not responding or default gateway is not available, sometimes it will give me both. It says it fixes the default gateway problem but it will show up again 5 minutes later.

Here is my ipconfig /all
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

[Code].....

View 5 Replies View Related

Cisco Routers :: Can't Get Quick VPN To Connect To 120w

Jan 29, 2011

For the life of me I can’t get my quick VPN client to connect to my Cisco 120w. I have IPSec gateway to gateway setup and working just fine. I made my quick vpn client under vpn tab. I enabled remote management. Every time I try to connect I get the failed to establish connection. Using the same quick VPN software I can connect to a rv082 with no trouble.

View 2 Replies View Related

Cisco Routers :: RV180 Quick VPN To Connect

Aug 6, 2012

I'm having issues getting QuickVPN to connect. I think it's an issue pinging the gateway but I'm not 100% sure. We are using Comcast Business, I have placed the RV180 in the DMZ. The setup looks like this: Internet -> Comcast router -> RV180 (DHCP) -> rest of network.

View 5 Replies View Related

Cisco Routers :: RV042 Quick VPN Does Not Disconnect

Mar 3, 2011

we bought a router for our company RV042, so far good
 
What i did:
 
1. i created QuickVPN clients, droped in certificate which exported from router
 
******NOTE********All company's laptops are running: Windows 7pro 32bits****************
 
The users are connecting sucesefully to router and using resources from server etc...
 
But, when they press disconnect on quickVPN it shows disconnected, but when i log in into router, i still see that they are connected (not disconnecting),
 
and the problem is they cannot connect to router second time if i don't manually disconnect them from rv042 router....
 
Only sometimes the clients disconnect properly from router, but it is very very rare...
 
Question1: Where I should look for the problem in router rv042 or client laptops?
 
Question2: Does the 64bit windows7 pro OS can connect to RV042router?
 
I have latest quickvpn software and latest router firmware.

View 10 Replies View Related

Cisco Routers :: 1194 Ports Used By Quick VPN

Nov 1, 2011

we recently bought a new desktop firewall solution from McAfee and I can't seem to get our VPN to work. I allowed QuickVPN in the firewall and additionally opened port 1194, 1720 and 1723 - but that does not do the trick. Once I turn off the firewall and use Windows Firewall instead it works.

View 2 Replies View Related

Cisco Routers :: Quick VPN Client Cannot Connect To RV042

Apr 7, 2012

PID VID : RV042 V03
LAN IPv4/ Subnet mask : 192.168.0.7/255.255.255.0
Working Mode : Router
 
[code]...
 
PPTP working fine but not with Quick VPN .. test on some computer and internet access still can not get connect to router.

View 79 Replies View Related

Cisco Routers :: Unable To Access LAN Behind RV042 From Quick VPN Client?

Aug 22, 2011

Very recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
 
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.

View 1 Replies View Related

Cisco VPN :: PIX-515E Remote Peer Is No Longer Responding

Jul 8, 2012

I am unable to VPN to my network from outside using cisco VPN client to PIX-515E. When I try it say: Reason 412: the remote peer is no longer responding. From inside everything work ok, I can connect... (same computer, same settings...)

View 3 Replies View Related

Login Failure Due To Remote Host Not Responding

Nov 2, 2011

I am able to connect via VPN from my office wireless. In my home I am not able to connect. I got the error as Login Failure Due to Remote host not responding. I have wireless connection in my home. I am able to surf internet and also able to ping the ip mentioned in VPN.

View 3 Replies View Related

Cisco Routers :: Rv042 Quick VPN Windows 7 Unable To Access Network Shares Or Ping

Nov 26, 2011

I have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc via the IP address. It has Norton Antivirus and Windows Firewall. This remote PC replaced a Windows xp PC that allowed access to the shares. I have tried access with a Windows XP Pro and Windows Vista Home Premium PC. Neither have worked.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved