WRVS4400N v2.0 2.0.0.8
QuickVPN 1.4.1.2
Vista Home Premium SP2 64-bit
Trying to connect from laptop through an AP to my WRVS4400N via VPN. Not having much luck...I get to "Activating Policy..." and then "Connection Error".I like this router thus far, I have been able to set up multiple BSSIDs and VLANs which has been very useful.
I have a WRVS4400N router & am using Quick VPN to connect to the Router. I can able connect through Window XP Machine, but not able to connect through Window Vista & 7. Whenever I try to connect through Window 7, I got this message: The remote gateway is not responding. Right now the Cisco router is behind DSL modem and I can't change the DSL modem to bridge mode as my ISP told me that we can't change DSL modem to bridge mode. what I have to do to connect to the router through Windows 7 & Vista.
View 3 Replies View Related Quick VPN and have not had any success connecting with our router. Below is my components info. Cisco router: WRVS4400N, Firmware V2.0.0.7. The router is behind a Comcast SMC business gateway modem Remote computer: Window 7 Ultimate 64 bit
I downloaded the Quick VPN client 1.4.2.1, and installed the client successfully but cannot connect using the VPN Client Account that I had set up in the router. Below are several questions that I hope to understand.
1) Do I need to configure specific ports for VPN in the Comcast gateway firewall?
2) What IP address do I put in the Quick VPN client profile when I connect remotely? The WRVS4400N modem shows 2 IP addresses in the Status:
DNS1: 68.xx.xx.176
DNS2: 68.xx.xx.132
Are these the IP that go into the "Server Address" on the Quick VPN client profile? and which one of the two? or do I use the static WAN IP address provided by my Comcast account?
3) In the Quick VPN client window, what is the "Use Remote DNS Server" mean?
4) Do I need to create a client certificate from the WRVS4400N for the client
5) Is there any setup needed for the remote firewall (if the client is behind a home wireless router and modem, for example)?
Router is a version 1.1 running with sw version V1.1.13-ETSI
Quick VPN is sw version Ver 1.4.1.2
The issue is that I can't connect due to that i cant ping the internal IP, get this error message in the QVPN log [WARNING]Failed to ping remote VPN Router![URL]I have disable the "Block WAN Request" and it is possible to ping the router on the external site.So as I see it, the router blocks for ping on the internal IP via QVPN, what have I done wrong?
can i share accouting software like Tally through quick vpn ? WRVS4400n has been configured on the site . and can connect to the site using quick vpn software without a problem . will Tally work ?
View 1 Replies View RelatedThe router will serve as an access point for 10 wireless station, 6 of them will run over Terminal server, the router will also serve 20 computer for the internet, so I want to Link aggregate the four LAN port to my swtich, I know how to do it on my Dell Powerconnect, but I want to know if the WRVS4400N will support it, there will be a lot of traffic going through the router so linking the 4 port in LAG mode to my Powerconnect swicth will speed up the communication
View 1 Replies View RelatedI just set up a linksys n900. On one of the laptops that have vista it doesn't connect to the internet. The odd thing is when I first hooked up up it seemed to work fine than a day later it just stopped. All other computers are fine and if I try to connect to another network it works fine. Just when I try my home network it has issues.
View 9 Replies View RelatedI'm having a heck of a time connecting the WRVS4400N VPN to another WRVS4400N VPN. both of the routers have the current firmware version V2.0.2.1: Router 1 is below, and router 2 has the matching configuration with as it should be the local group being that routers local information and the remote crew set up being router ones information. the status is up on both of the routers, but I'm unable to ping the remote gateway or any device behind it.[code]
View 5 Replies View RelatedI put just got a wrvs 4400N and when I replaced my old linksys router I can't access my network computers anymore. I'm I missing something or do I need to do some kind of setup?
View 3 Replies View RelatedI want to buy a WRVS4400N, but I need to know something before.
The router will serve as an access point for 10 wireless station, 6 of them will run over Terminal server, the router will also serve 20 computer for the internet, so I want to Link aggregate the four LAN port to my swtich, I know how to do it on my Dell Powerconnect, but I want to know if the WRVS4400N will support it, there will be a lot of traffic going through the router so linking the 4 port in LAG mode to my Powerconnect swicth will speed up the communication !
I have a remote WRVS4400N that has a dynamic outside address that's initiating a connection to a ASA 5540 with a static address.
I'm all set on the ASA side. My questions relate to the 4400N. It doesn't appear to have a very robust configuration/setup available for L2L tunnels. For one my encryption is limited to 3DES.
But I'm wondering if I'm missing something in the config. I have to set up L2L tunnels to two other firewalls. One firewall has 3 discontiguous networks, and the other has 2. I have 5 tunnels setup, is this the only way? What I would like to see is 2 tunnels, one for each remote firewall, but then each tunnel would have access to the appropriate networks (like on the ASA side), is there anyway to do this? Perhaps a command line util for this unit?
My other issue relates to the tunnel-groups I have set up on my ASA's, and I would like to use appropriate names...however I can't seem to find a way to enable this to happen on the 4400N side....what I mean is I need a way to create either a "keyword identifier" or a "firewall identifier" on the 4400N and I don't see an appropriate field in the web interface.
I'm running Vista Home Premium X64 with latest updates. I'm also using a VPN for work. Hide My *** Pro v2.6.9.which worked just fine until this morning. My home internet connection is working normally though.My isp is Comcast. My Firewall is Comodo and I have tried using the VPN with and without the firewall running all to no avail.
View 4 Replies View RelatedYesterday my main computer lost internet connectivity after avast! ran an antivirus scan and removed several viruses. I spent much of the day yesterday researching the possible problems and did not come up with any solutions.My computer's OS is vista, and the network status says it is, "Connected to identifying". If there is any additional information you will need, I will gladly provide.
View 14 Replies View RelatedI am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port. Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network. But I want to access Internet from the laptop. Is it possible?
FYI, when I typed ipconfig in cmd prompt in desktop,
PPP adapter High Speed Data:
Connection-specific DNS Suffix . :
[Code].....
Can't get my computer to recognize my wireless Dlink DIR615 Router. It accepts the password and connects to the router but not the internet
View 2 Replies View Relatedany success using the stand on a WAP4410N? I have not been able to get them to snap into place as described in the Quick Start Guide.
Seems to be an extremely crude and very poorly implemented design. They fall off and the WAP frequently falls over. I expected much better from Cisco given the price.
I've currently got a WRT54G and have an opportunity to buy a WRT54GS. The problem is that the seller of the WRT54GS has lost the Set-Up Wizard CD & Hard Copy Quick Installation Guide. Obviously I have these items already with my WRT54G. My question is this. Are these items different for the WRT54G or will the stuff I already have for the WRT54G "work" for the WRT54GS.
View 5 Replies View Relatedusing same network but don't see each other. Why?
View 2 Replies View RelatedI need to setup a VPN into my home network ASAP.I have logmein so i can get in and setup a VM or something, but im not sure the best way to about this.I have TWC home
Internet---Modem---DlinkDIR-655 Router(no dhcp server)---Switch---network
I am running a 2008R2 DomainController/DNS/DHCP.I have hyper-v setup, so maybe a vm is easiest, just thought i would ask.Doesnt need to be super robust, this is a temporary solution.
For the life of me I can’t get my quick VPN client to connect to my Cisco 120w. I have IPSec gateway to gateway setup and working just fine. I made my quick vpn client under vpn tab. I enabled remote management. Every time I try to connect I get the failed to establish connection. Using the same quick VPN software I can connect to a rv082 with no trouble.
View 2 Replies View RelatedI'm having issues getting QuickVPN to connect. I think it's an issue pinging the gateway but I'm not 100% sure. We are using Comcast Business, I have placed the RV180 in the DMZ. The setup looks like this: Internet -> Comcast router -> RV180 (DHCP) -> rest of network.
View 5 Replies View Relatedwe bought a router for our company RV042, so far good
What i did:
1. i created QuickVPN clients, droped in certificate which exported from router
******NOTE********All company's laptops are running: Windows 7pro 32bits****************
The users are connecting sucesefully to router and using resources from server etc...
But, when they press disconnect on quickVPN it shows disconnected, but when i log in into router, i still see that they are connected (not disconnecting),
and the problem is they cannot connect to router second time if i don't manually disconnect them from rv042 router....
Only sometimes the clients disconnect properly from router, but it is very very rare...
Question1: Where I should look for the problem in router rv042 or client laptops?
Question2: Does the 64bit windows7 pro OS can connect to RV042router?
I have latest quickvpn software and latest router firmware.
we recently bought a new desktop firewall solution from McAfee and I can't seem to get our VPN to work. I allowed QuickVPN in the firewall and additionally opened port 1194, 1720 and 1723 - but that does not do the trick. Once I turn off the firewall and use Windows Firewall instead it works.
View 2 Replies View RelatedI have a hub / spoke configuration, with about 9 spokes. All connect ot the main office over a VPN, all native Cisco routers (2900 series)I want to use netflow to monitor traffic, and I started, but my results are not what I expected. I don't think I configured it properly.
Several interfaces have sub-interfaces, so if I'm reading correctly, I only export flow from the physical intyerface, not the sub-interfaces. Correct?I want both inbound and outbound traffic, so do I use the command twice with ingress and egress?What is the difference between V5 and V9?
Finally, how does NBAR fit in this? I want to see applications as well as just packets.
I have a laptop and a desktop pc both connected to the same wifi network, both running win 7. File transfers are not quick enough for my liking over wifi so when I need to move a few files about I tend to hook the two together with an ethernet cable. When I try to copy a file however it defaults to using the wireless connection. I'm getting around this at the moment by just turning the wifi off on the laptop while I do the transfers but it would be nice to not have to.
View 1 Replies View RelatedWe use FileMaker Pro instant web publishing for several of our clients. I just installed the Cisco RV180w wireless N vpn router. As soon as I enabled the FileMaker IWP quick VPN stopped working.
View 0 Replies View RelatedPID VID : RV042 V03
LAN IPv4/ Subnet mask : 192.168.0.7/255.255.255.0
Working Mode : Router
[code]...
PPTP working fine but not with Quick VPN .. test on some computer and internet access still can not get connect to router.
One computer with two users. My account allows quick access but the other is dramatically slow. I created a new account and it has the same problem.
View 1 Replies View RelatedVery recently, we had implemented Site-to-Site VPN tunnel between two Linksys RV042 4-port VPN routers. Everybody in our remote site is accessing and sharing the data through this tunnel and it is working fine.
Now, we have a plan to implement the same for our mobile clients also. For this, we had followed all the basic configuration procedures and user got connected to Quick VPN tunnel. Here is a problem we had observed. The mobile client user is connected to the tunnel, but unable to access the office LAN from the PC.
If I am using an ASA5505, and I have a configuration similar to below, I see that the untrusted interface is only allowed to ftp to 192.168.1.5. Since the trusted interface is not limited to ftp only can it basically run any protocol it wants to 10.20.30.2, or does it get limited to only ftp by the other ACL on returning packets.Also, is the ACL applied to the interface because the ACL's name is the name of the interface?
View 2 Replies View RelatedWe have a need to access an VLAN at the main office( ie Core Switch 6500,switch 3750) from a remote site(Cisco3845 router, Switch3750) connecting by a SP through fibre link.
what is the easiest and quick way to do it and the user from the remote site just want to have access to that VLAN for a couple of days only.
Don't have CD. Where do I download this on Dlink site?
View 3 Replies View RelatedI have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc via the IP address. It has Norton Antivirus and Windows Firewall. This remote PC replaced a Windows xp PC that allowed access to the shares. I have tried access with a Windows XP Pro and Windows Vista Home Premium PC. Neither have worked.
View 1 Replies View Related