I just set up a linksys n900. On one of the laptops that have vista it doesn't connect to the internet. The odd thing is when I first hooked up up it seemed to work fine than a day later it just stopped. All other computers are fine and if I try to connect to another network it works fine. Just when I try my home network it has issues.
View 9 RepliesI am trying long distance to set up above router. Router communicates fine with laptop and wifi printer but when she tries to connect her iphone (I think iphone4), phone states that password is incorrect. She is using the same password that she used for the printer and laptop which is the router default one which is a series of mixed numbers and letters.
View 1 Replies View RelatedI recently upgraded my router because my last cisco router was having a misdirect issue. Type in facebook and you get an invalid URL and would have to reset the router to get it to work. Now I bought a new Cisco router and am regretting it. The n900 was a pretty penny and now ALL my videos are always buffering. I have several computers connected, but not active. The internet is painfully slow with the new router, but lightning fast with out it.
Currently using my laptop secuirty settings are IPv6/ and 4 SPI Firewall Protection: Enabled WPA2/WPA mixed mode.
I have tried everything: Rebooting, up to date firmware, resetting, What should I do next? Disable some of its advanced features? Cisco is earning a bad rap with me if a router that boasts high internet speeds makes all my videos buffer and load painfully slow. Let alone getting through all the commercials on the internet now.
I have the N900 model and would like to connect a hard drive via usb. The router can see the external hard drive but the problem I run into is the HD uses a password to open it.
View 7 Replies View RelatedI am looking to expand my network. I purchased a WD N900 router to replace my old Linksys E1200 .The internet connection is coming from the modem, into the WD N900 Router. The WD N900 has the printer hooked up to it, and 3 NAS, a computer and our magic jack. I ran 30 feet of network cable and routed the cable through the walls into the section of the house. I am looking to use my old Linksys E1200 to extend my network. I want to hook up the gaming systems (PS3, XBOX360) as well as the entertainment receiver to my Linksys router. What is the best setup? I am looking to be able to access the NAS from the WD N900 on our PS3 and Xbox360 so LAN-LAN looks like the way to go. I tried using the directions on Linksys site, but it doesn't seem to want to work. I test the network cable I ran through the walls, and it is getting a good signal. However when I hook it up to the Linksys E1200 and connect my lap top the Linksys E1200 to test it isn't working.
View 6 Replies View RelatedThere are plenty of instructions to configure USB storage but there are no instructions on how to use it, specifically. Ok, so I have my ftp address, user name and password and tried to connect with Filezilla on my local network. Unable to connect. Also, the USB device does not even show up in Network settings. However, I am able to see the device as a media server from Sony Playstation.
View 3 Replies View RelatedI have finally got netgear adapter to connect to router, and its connected, but not able to access any webpages. I am not receiving any bytes back. I had to manually type in a IP address, as it was not picking it up automatically. I have other devices connected to the router (laptop, ipad, iphones) and access web easily. I have tried hard resets, and shut downs all with no avail
View 14 Replies View RelatedYesterday my main computer lost internet connectivity after avast! ran an antivirus scan and removed several viruses. I spent much of the day yesterday researching the possible problems and did not come up with any solutions.My computer's OS is vista, and the network status says it is, "Connected to identifying". If there is any additional information you will need, I will gladly provide.
View 14 Replies View RelatedI am having internet connected to my Desktop with Win XP. Internet mode is Wireless Data Card that can be inserted into USB port. Now I have a laptop with Windows Vista Home Premium. I was able to connect both of them using ethernet cross over cable and successfully enabled file sharing through Local Area Network. But I want to access Internet from the laptop. Is it possible?
FYI, when I typed ipconfig in cmd prompt in desktop,
PPP adapter High Speed Data:
Connection-specific DNS Suffix . :
[Code].....
I am using Vista 32bit and connect to the internet via a Linksys router and have cable modem. When I start my computer, it will not connect to the internet. I have to disconnect and reconnect my network cable and it starts working fine. This is very annoying. Another similar computer is connected to the same router and doesn't have this problem. how to make my computer connect to the internet automatically without having to do this each time I boot up my PC?
View 2 Replies View RelatedI have been having a heck of a time getting my gigabit network working off of either my new router, or 2 older ones. Since my house is wired with cat5 cables, I was thinking about putting an 8port router in my networking box that is tucked away in the corner of the house, and then using my new Dlink 857 router as just an access point in a more optimal location in the house.
My questions are as follows:
Would be slower for either the wireless internet speed or the speed of file transfers between the wired computers?
Would I be able to transfer files both ways from the NAS that would be hard wired to the 8-port router? Is there any benefit/disadvantage to my idea that I have not thought of? I know it is possible, but do I want to do it?
Internet----->Cable Modem --------->Wired Router --------> Xbox/NAS/PS3/Smart Player/Dlink Router set as Access Point
My Linksys WRT160N wireless router stopped working all of the sudden. When I connect to the internet wirelessly my laptops say I have full signal but "No Internet Access." None of the 4 wired ports on the back of the WRT160N router give me wired internet. The only way I can get internet is to connect the wire to my internet modem
View 5 Replies View RelatedI have an E2000 (2 yrs old) that is not connecting to the internet.It is a slave to a BEFSR81 which controls the DNS.I am able to connect to other computers on my home network, so I know the wirelss is working and the cables are all good. I know that I can plug my laptop into the port on the hard wire router that the wireless was plugged into and I can get internet. So the only thing I can think of is the inernet is being blocked at the E2000.
View 1 Replies View RelatedMy WRT54GL Linksys modem has me stumped, it will not connect no matter what I try. it worked fine until just recently after a power outage; everything seems to be working perfectly fine hardware wise; the router shows a solid power led and network activity on WLAN, Ethernet, and Internet. I've tried soft resets and factory reset, clearing my caches, releasing/renewing IPCONFIG.
The peculiar part is that it is not letting me access the web config at 192.168.1.1 while connected with the modem, however if I plug the router directly to my PC's ethernet port I can access the config; Itried updating the firmware this way but it didn't solve the problem. I have no more ideas.
Below is the IPCONFIG information with the modem and router hooked up:
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller #2
Physical Address. . . . . . . . . : 00-04-4B-17-C2-1A
[Code].....
I am running the most recent firmware 1.1.28 released on Jan 2nd(ish) 2013 and if I try and access or configure my external Segate Freeagent 1.5 GB it essentially crashes my router whereby I cannot reach the internet nor the Admin console. I have to power cycle to be able to connect?
View 9 Replies View RelatedI have A a linksys WRT54G2 and am trying to connect it to my wii. I had my Wii search for an access point And it found my router. I put in my password and it was accepted but I am still Not Connected to the internet.
View 3 Replies View RelatedI wired it all up correctly, and Continue to get "error 322: check router" upon every attempted install. I did some research and tried releasing and renewing IP amongst restarting all networking devices AND PC's. Peculiar enough, I could connect AND get online wirelessly from a netbook, but neither of my 2 PC's could connect via a wire. I got a defective router, is it possible the ports are malfunctioning? because the lights are on, but 3 or all of the 4 lights are continually on when only 2 ports are plugged in
View 5 Replies View RelatedI purchased a refurbed? router on the internet, not supported any longer by Cisco Chat. I have a wireless internet: WiMax thru Clear wireless. I have a Linksys voip box coming off it for my phones. I installed the disk that came with the router, followed the directions, and got a message that Internet could not be found. Went to the live chat and followed some advice that did not work, conflict with voip? bypassed the voip and ran a cable from the wireless modem to my E3000.
View 3 Replies View RelatedWell, I have a WRT120N Router for 11 months to now. I never had a problem with the Router, but since 2 days ago, It didnt connect to the internet.
My network is: Internet > Cable Modem > WRT120N > Computers
As I said, the problem is that the Router doesnt has Internet Connection.
Things to take in consideration: The Cable MODEM ISN'T the problem Because if i connect the modem directly to a computer, I have Internet connection without problems.I Diconnected and Connected both Modem and Router in several ways and several times, and it doesnt work.I also tryed clonning my PCs MAC address to the Router and it was the same.The Router Indeed receives the External IP Address from the Modem, and also, it changes if i restart the modem (as my ISP IP is DHCP). But there is NO internet conection.The Router had the 1.0.05 Firmware, and i upgraded to 1.0.06, and the problem persists. Another thing to take in account is that if I turn off my modem and the I turn it On, sometimes, the router receives Internet connection, but in matter of Seconds (minutes as much), the internet connection falls.
This is NOT an ISP problem, because as I said, if I connect the Modem Directly to any PC, i have a perfectly normal Internet Connection, And also, I called my ISP and they Said me that there werent any problem on their network.
I have also tryed with the "Router Dianostics" (the Ping and Traceroute options that are in the Router's Webend and also, no conection. So its NOT a Cables problem.
I am trying to assist my sister with her BEFW11S4 Wireless Router. It has been working fine until this week! The Firmwre is version 1.50. The main router is not connecting to the internet, yet the 2 wireless adapters for their other 2 computers are! It shows that the main one has a connection but when you bring up any Internet Browser it says it can't find the connection. We've checked the settings and they are all correct. We even turned the firewall off and that didn't work!
View 1 Replies View RelatedI was attempting to use my EA4200 in bridge mode but found out for some reason my devices weren't connecting to the internet. So I decided to try to access the router through the IP address of the router with no avail. So I pull the router and plug it in normally and notice that it keeps flashing. So that already gives me an idea something is wrong. I go through the process of unplugging everything from the router, and plugging my PC directly into the LAN port 1 of the router then powering it up. On my network connection list it keeps trying to identify the network but keeps failing (keep in mind that the router still is flashing). So I decide to attempt a 10 second reset, then a 30 second, then a 30-30-30. All with no success. The router keeps flashing.
Which gets me to the point where I am now... router flashing at me, and wondering if this now out of warrenty unit was a waste of money. I am noticing that a lot of people have had questions and issues with the E4200v2 which now concerns me, well hopefully this can be fixed.
Can't get my computer to recognize my wireless Dlink DIR615 Router. It accepts the password and connects to the router but not the internet
View 2 Replies View RelatedMy xp computers recently gave up. So, I bought a new one (windows 7).
When I had my new computer plugged directly into my modem, there was no problem; I could easily connect to the internet.Yet, when I plugged the modem into my router (WRT54GS) and then plugged the router into the computer, I repeatedly encountered: Error 651.
The new computer has a built-in wireless adapter. So, I was able to disconnect the router and try to re-connect via a wireless connection. Yet, dispite being able to connect to my "network", the computer was not able to connect to the internet; again, I received the dreaded Error 651 message.I tried using the installation disk, but it would not work, either.
WRVS4400N v2.0 2.0.0.8
QuickVPN 1.4.1.2
Vista Home Premium SP2 64-bit
Trying to connect from laptop through an AP to my WRVS4400N via VPN. Not having much luck...I get to "Activating Policy..." and then "Connection Error".I like this router thus far, I have been able to set up multiple BSSIDs and VLANs which has been very useful.
I have the Netgear wndr4500 router setup as an AP. The wndr4500 has a feature for guest wifi but will not connect to the internet. The main wifi will connect to the internet fine. I'm wondering if I use the WNDR4500 as an AP, the guest features do not work?
View 2 Replies View RelatedI am not able to connect my HP laptop (Windows Vista) to the internet via a wireless router/high speed internet.My internet service provider confirmed that it is a problem with my HP laptop.I have a Linksys router. My other laptop (Sony) connects fine.I have tried two browsers on my HP laptop to access the internet with no luck.My HP laptop does say that I am connected to the wireless network.
View 9 Replies View RelatedI am having trouble connecting to the internet using my linksys router. I can connect to the internet when directly connected, however when i attempt to go wireless i can only connect to the router, not the internet[CODE]
View 1 Replies View RelatedAfter a power failure nothing could connect to the internet anymore. I called MTS (ISP provider) and they had me change some setup on my PC. Now my PC connects to the internet, but nothing else will connect (X Box, WII, iPods, Laptop). They were connected wireless before the power outage through my router. MTS said they are only responsible for ensuring their model works, not routers.I have checked some router settings. It is set for DHCP with 50 users.
View 15 Replies View RelatedI have a BEFSR41...about 2x a week when connecting to internet I have to pull and replug router in order to get on-line.
View 3 Replies View RelatedI upgraded my old Linksys wrt54g to the E1500. All the XP os are connected via cable and wireless connection, but the Vista laptop i get local access only connection error. This laptop used to connect on the older router using wep but with E1500 wpa-2 it cannot connect. I am unable to ping the router from the laptop wireless. Connecting ethernet cable it works fine and logging in as a guest works does too.
View 1 Replies View RelatedI'm running Vista Home Premium X64 with latest updates. I'm also using a VPN for work. Hide My *** Pro v2.6.9.which worked just fine until this morning. My home internet connection is working normally though.My isp is Comcast. My Firewall is Comodo and I have tried using the VPN with and without the firewall running all to no avail.
View 4 Replies View RelatedFor quite some time my linksys wireless g notebook adapter hasn't been connecting to the Internet at all. I go to my Internet options and my house's Internet router doesn't show up. I remember a long time ago I was clearing space on my computer because its and old one and it runs slow Because I don't have much memory and I might have accidently deleted the linksis progam / installation. And I have no way of re-intalling it. I think the only way of re-installing it is using the linkage disc but I lost it in some boxes packed in storage.
View 1 Replies View RelatedMy sis has a toshiba satellite laptop running vista and she cant go on the internet while mine and my dad's can.Her computer was able to go on the internet but then suddenly she cant. I've searched everywhere, i tried resetting the TCP/IP, setting a static IP address, even returned the laptop to factory settings, but no luck.The network page stays as: Computer----------unidentified network-------x------internet[CODE]
View 3 Replies View Related