Cisco Routers :: RV215W Wireless N Is Too Slow?
Jan 6, 2013
Recently I bought RV215W router and after installing it in my home network; I started experiencing very slow internet connection over wi-fi. Wired connection to this router are working fine. After several hours of trouble shooting, I am able to isolate the slow internet issue to Wirelss N connection. Wireless b/g works fine.
Router is using 1.0.0.16 firmware. I tried to check is there any latest firmware upgrade for this device. Couldn't find any firmware related information in cisco web site.
One another point related to USB WAN; I am not using any USB for 3G connection. USB indicator is keep on blinking.
View 3 Replies
ADVERTISEMENT
May 5, 2013
The RV215W is not responding to the https port, the VNC port 5900 is also failing to respond. VPN still works, I will go in and reboot and it will work again. It works for 1 day and fails to connect again.
Latest Firmware is already install, I don't know what else to do.
View 2 Replies
View Related
Mar 7, 2013
I just switched from a Linksys Router to the RV215W, I was able to put custom dns servers for my wan, ie. opendns, but now in cisco, I'm missing this feature.
Does any one know how to set-up a workarround with DHCP from my ISP and access custum dns servers..
When are we gonna have this feature implemented in the WAN secction.
View 1 Replies
View Related
May 7, 2013
After connecting ZTE636 USB modem to Cisco RV215W the modem is not recognized, even though it is on the compatible modems list. The stick is from Orange PL. Firmware upgraded to 1.1.0.5.
View 1 Replies
View Related
Feb 3, 2013
I am thinking about buying one of the 2 routers i have listed above. I have some concerns though.
First off what are the MAJOR differences between the two? (they look the same to me)
Do they both contain PPTP and is it simple to configure? Do i need any kind of special client software? Can i use my iphone and ipad to connect to the vpn server. Is there a minium download/upload speed to have a vpn sever?
View 6 Replies
View Related
Jan 16, 2013
I'm trying to setup a Huawei E398 from Swiscom (switzerland operator) and my CISCO RV215W cannot detect him. Is the RV215W compatible with the Huawei E398 USB LTE Modem?
View 2 Replies
View Related
Feb 9, 2013
I've tried to download the .docx document to both Win and Mac computers. On both platforms MS Word complains that the document is corrupt.
View 5 Replies
View Related
Feb 3, 2013
I need support with the RV215W. It won't recognize a Huawei E398 LTE-Stick (Germany: Telekom Speedstick LTE). According to [URL] the RV215W should support the Speedstick LTE.
Router Firmware: 1.0.1.1 (newest) E398 Firmware: 11.433.61.10.55 (newest from Telekom)
View 1 Replies
View Related
May 11, 2013
RV215W router port forwarding not working.Port forwarding works for a short period of time, then stops working. Reboot router, works again for short period of time, then stops again.
I have updated firmware to latest. I had seen other similar bugs posted for 220 and I think 180, not sure if this router has similar bugs and waiting for fix release to firmware.I had recently purchased two, one deployed, will hold off on other now because of issues, and may have to move to different unit if a resolution not found this week.
View 5 Replies
View Related
Apr 27, 2013
I have a Cisco RV215W and i want to create inbound rule (wan -> lan) with ip control.I ha created in "service management" a new service (rsync on 873 start port and and port) After i had created a new access rules :
[code]...
View 2 Replies
View Related
Aug 2, 2012
The other day I decided to upgrade my old 10/2Mbps connection to a 100/5Mbps cable connection and my ISP gave me the EPC3825 router. When using an ethernet cable everything works great and my speedchecks max out every time, the problem is that I can't have cables all over my apartment so I'd like to use wireless. With a computer located right next to the router I've gotten as high as 20Mbps and usually I'm left at about 3Mbps. I'm aware that using wireless can result in a small drop of speed but this just seems too much, especially considering the fact that I ran a steady 10Mbps when using wireless on my old connection.
Model:Cisco EPC3825
Vendor:Cisco
Hardware Revision:1.0
Bootloader Revision:2.3.0_R3
Current Software Revision:EPC3825-v302r125532-110504c
Firmware Name:epc3825-v302r125532-110504c.bin
Firmware Build Time:May 4 14:04:04 2011
View 1 Replies
View Related
Apr 23, 2013
I purchased a Belkin N-300 router, model F9K1002V4, about 6 months ago, and recently upgraded my cable internet service to a 20+ mbps level, in hopes of improving the speed of my wireless devices. The speed on all of my wireless devices (a new laptop, ipad, and iphone) is still below 1mbps, even when I'm in the same room with the router. The speed on my wired computer registers above 20mbps, so I don't think the problem lies with the cable internet. I have tried to download the firmware update on Belkin's site, but my computer says it doesn't have the right program to run it, and it can't find the program on the web. I sent an e-mail to Belkin customer service, but they just sent me an automated reply, referring me back to their website, with the firmware update that I can't access.
View 4 Replies
View Related
Jul 23, 2012
I have a RV220W operating in 2.4GHz N-only mode. Channel bandwidth is set to 20MHz, channel to 6 (a site survey shows that channel as completely clear), WPA2/AES. I am connected to a TrendNet wireless bridge. The admin page for that wireless bridge shows a link quality of 100% with a signal strength of 71%. If I select a higher channel (11), the signal strength drops to 51%.
I have a Windows 7 PC connected to the Trendnet bridge and a Windows 7 server connected to the RV220W, both via a 1Gbps LAN port. When I transfer a file from the server to the PC or vice versa, I get a lowsy 2MBps (~20Mbps) transfer rate. That seems awfully slow. I tried channel bonding from 20 to 40 MHz
View 2 Replies
View Related
Mar 5, 2013
I bought my own modem, a Motorolla Extreme something or other, is a DOCSIS 3.0. My router is a Belkin N150. When I plug my desktop computer directly into the router, I get speeds upwards of 50Mbps. The wireless, however, gets about 0.15Mbps download, but as much as 12Mbps upload.
I know it's not computer specific, because I plugged my laptop directly into the modem and got the full speed. AND I put a wireless adaptor on the desktop and got the slower speeds.I live in a densely populated area and there are 27 other (visible) wireless networks available (all locked, unfortunately. Otherwise I wouldn't be in this situation in the first place). So I tried every channel, doing a speedtest with each, and I got almost identical results each time: 0.12-0.17Mbps download, 11-13Mbps upload. I can't imagine that getting only 0.15Mbps could be a result of a channel being clogged, but I tried it anyway;
View 2 Replies
View Related
Aug 5, 2011
I'm an IT professional with more than 10 years experience. I have spent last 5 days trying to figure out why the wifi connection to this router is so slow, but still no luck. I'm getting only 13Mbps even if my laptop is next to the router! (wired connection worked ok)
I have tried all sort of setting combinations, 2.4GHz/5GHz; N only/ G,N Mixed; Auto/20MHz bandwidth; different channels; WPA2 encrypted vs open; disable firewall; wmm enabled/disabled; 1.0.0.26/1.0.1.0 firmware... no matter what I try, I always get only 10 - 15Mbps speed.
Once I replace this router with my old router, it worked perfectly --- getting 70 - 80Mbps with exactly the same testing environment and configuration.
I really expect this router to offer much faster wireless speed according to this review: [URL]
View 12 Replies
View Related
Jan 24, 2012
Recently I placed an Cisco SRP 526W, but this modem is acting quite strange. I have configured an ADSL connection, some NAT forwardings and a VPN tunnel, all of this is working fine. When the Cisco is booted and running, everything runs smooth. Internet is working nice, I can connect over the VPN tunnel to the internal network and so on. The problem is that after a while, mostly after a day or two days, internet browsing is showing problems. IE can't display the page and I have to refresh 1 on 2 times to reach te webpage. I can't connect over the VPN tunnel to the internal network or the internal ip-address of the router, the router is not responding on ping request on the internal ip and external ip. The NAT forwardings are still responing though.
After a reboot everything is running fine again, but I can't let my customer reboot his router each day.
From the ZyXEL modem/routers we used to place at our customers I know the NAT table runs full and I had to use a greater value
View 6 Replies
View Related
Jan 30, 2013
My brand new RV180 seems not to be able to exceed 1.1 MB/s WAN download speed. Using a simple Linksys WRT-320N I used to have 5-6 times this speed. Value is with default settings, various sources (HTTP/NEWS downloads). Trying to improve this wit QoS-settings dows not improve this in any way.
View 2 Replies
View Related
Nov 29, 2009
I've been having trouble with the internet connection speed on my Mac. I originally noticed the problem when my mail kept timing out whenever I sent an attachment, I went to different forums trying to find the solution but nothing really worked, so I found work arounds for the email and lived with it. Recently the company I work for moved offices and I was no longer behind the RV082 and my internet ran better dispite the slower connection. Once we finished moving, I needed to use the Dual Wan Load Balance feature of th RV082 so I set it up in the new office and my internet was slow again. Unfortunatly in the new office there are several more Macs than just mine so I really need to get it working. Currently we have 2 seperate networks for PC and Mac and I really need to get them on 1. Is there a setting I may have overlooked or is it not going to work with Mac.
View 26 Replies
View Related
Nov 26, 2011
i noticed that my network speed was very slow (connected wirelessly with N) i shut down the wireless and connected to my LAN i ran LAN Speed Test
WLAN 27sec
LAN .15sec
i rebooted the router & times were <1sec, however a few minutes later it was slow again running latest firmware V2.0.2.1
View 2 Replies
View Related
Dec 20, 2012
i got an issue with vpn and cisco rv100w, router is configured well and computers and iphone can connect with PPTP. Problem became when we map NAS drive from computer or we move data (1-4 Mb). Seems connection go down, speed is so slowly and drop the connection.Is it from router? or from Internet provider?
More data, If I connect to http of router/NAS .. all go fine, only when we need data from NAS (map drive by windows) copy, open files, ..., connection is so slowly and drop connection.
I saw in the logs of the router
[code]...
View 1 Replies
View Related
Jan 11, 2013
Lately I notice my router is very very slow. most of the time I cannot use my ipad or it takes too long and sometimes never finishes downloading a web site. I called Belkin support, and I was told that I need to update and configure, and to do that I have to pay more than what my router cost.
View 3 Replies
View Related
Jan 8, 2012
I've recently upgraded from a 512k adsl connection to a 16mb fiber optic connection.Whereas I never had a problem previously, my rvs4000 slows to a crawl once or twice per week. The only solution seems to be to cycle the power since the admin interface freezes. I also have to cycle the power on my two wireless ap to get them back up.I believe I have the latest firmware, is this a common problem on a faster connection?
View 1 Replies
View Related
Jan 31, 2012
After upgrading the firmware on my RV042 router to version 1.3.13.02-tm, I am experiencing very slow Internet response on most sites. In some instances, when the page does load, it lacks many graphics. Frequently, I also receive a "server not found"error. In all cases, reloading the page (once it has loaded) results in a complete page display. This is occuring on two MacBook Pros and also on an iPad. The router is a version 1, so no further upgrades are available. I contacted support, but since it is out of warranty, they are unwilling to assist. Prior to the upgrade, everything worked fine, as it has for 5 years.
View 1 Replies
View Related
Feb 18, 2013
I have an RV042 VPN tunnel with an RV082.The RV042 has a public IP Address obtained by PPPoE, the RV082 has a public IP Address obtained via Static IP.The problem I see is a really slow performance. Both internet conections are idle and the performance is about 2 or 3 kbyte/s My question are if I should I enable any of this:
- Agresive mode
- NAT Traversal
- IP Compresion
- Dead Pear Detection
How can I troubleshot this slow performance?
View 2 Replies
View Related
Nov 4, 2011
We are having several issues with the new batch of RV016 (rebranded as cisco and with cisco firmware. The Cisco RV016’s are configured to load balance aDSL internet access from 4 Cisco 877 modems/routers. Ports used are WAN1, WAN2, WAN3, WAN4.
Issues are: WAN 1 port resets to 0.0.0.0 regularly and traffic on WAN 1 fails DNS fails regularly behind the RV016 onlyIntermittent internet connection behind the RV016Slow internet connection behind the RV016Extremely slow DNS query and reply behind the RV016 (DNS resolve takes 1min -1m30)
The issues above are reported from different deployment sites and with different scenarios.
We also test above with Code...
View 1 Replies
View Related
Nov 17, 2012
My ISP tested my connection and told me my signal is very weak. I can no longer play games online because I lag tremendously. I can't steam videos while someone else is using the internet either. Also I can't access it on wireless devices unless I am in view of the router. I'm not sure what caused my connection to suck butI have the essential plan from cox.com. When I test my connection on speedtest.com I average 75ms/ping, 3.25mbps/dwnld spd, and
View 2 Replies
View Related
Feb 10, 2013
Belkin N300 - bought two weeks ago and have had very slow internet connection since.
View 1 Replies
View Related
Nov 21, 2012
My Router has been gone from running at bout 7Mb download speed to 500Kb download speed. When the router is restarted using the menu software it will run quicker, but only for 20-30 second then back to a slow speed. It was off while we were on holiday in August and has not been any good since. Its a shame as it only 2 years old.
View 2 Replies
View Related
Feb 13, 2013
Having an issue with my Belkin N600 router - when initially installed it was working fine but in the past week it has gtten slower - if I connect directly to my DSL modem my speed is 1.5 MBS when I use the router connection my speed drops to .1 MBS - tried resetting to factory defaults & that did not work also tried resetting my modem *& router still having the same issue.
View 9 Replies
View Related
Nov 20, 2012
My N150 wireless router sees 25mb+ speed from my internet connection but my wireless connects at 1mb. Why is the WiFi being resricted?
View 2 Replies
View Related
Oct 19, 2012
Accessing my hdd on the usbport is very slow. Have a n600 router. Can I boost this in any way?
View 2 Replies
View Related
Nov 18, 2012
I was having problems setting up dd-wrt so I wanted to flash back to the Belkin firmware and try again. I went to what I thought was the product page for the N600 and found the latest version of the firmware and flashed to it. The only thing it does now when I plug it in is 2 slow flashes of the green light and then nothing. I tried holding down the WPS button while plugging it in and I get the light to stay green but it doesn't respond to 192.168.2.1.\
View 6 Replies
View Related
Mar 14, 2011
I have an WRVS4400N configured as a WAN and Wireless router and can connect clients (PC's and laptops) wirelessly thru out the office. The clients that are farther away (10-15 meters and on another floor) connect at a very slow rate i.e. less than 10MBps. I have a WAP4410N configured as a repeater. Immediately after powering up it will allow connections to the 4400 and clients work fine for a 1-2 minutes, then the connections drop and I can no longer connect through the 4410. Nor can I ping the 4410 through the 4400 although right after the pwr cycle I am able to ping the 4410. After another pwr cycle the 4410 is available for another short period.I have attached some info on the configuration of the units and I also have the configuration files available.
View 4 Replies
View Related
