Cisco :: Selective Broadcast Of SSID On Certain Access Points In WLC 2504
Feb 24, 2013
I am using Cisco WLC 2504 for provisioning Wireless Connectivity over my Wired Environment. Have deployed 4 Access Points spanning my entire campus as per Customer Requirements. Created 10 SSIDs for Different Networks. Would like to know if there is any possibility of Broadcasting say a particular SSID XYZ on only two or 3 Access Points and keep broadcast disabled on Others.
integrating the authentication on these SSIDs using Active Directory Domain Credentials.
View 5 Replies
ADVERTISEMENT
Jun 13, 2012
I'm using a Cisco Wireless LAN Controller 5508, 14x Access Points 1041 and 6x Access Points 1031 in combination with a NCS 1.0.
Is it possible to broadcast SSID'S only on defined Access Points, e.g. AP 1-3,7-10,18? If yes, what have I to do?
View 8 Replies
View Related
Mar 1, 2013
We have purchased Cisco 2504 Wireless Controller (One) and Ciscon 1042 Access Points (Five). At present I am going to use 3 access points only.I have attached a simple diagram of our office network. We have more than 30 VLANs configured in Core Switch, we are planning to give wifi access to only 3 VLANs.
1. VLAN 121 ( IP Segment - 10.52.121.0 /24)
2. VLAN 116 ( IP Segment - 10.52.116.0 /24)
3. VLAN 100 ( IP Segment - 192.168.100.0 /24) (Guest)
I would like to use LDAP or ACS for authentication purpose.
View 3 Replies
View Related
Mar 16, 2013
I have installed/setup a cisco 2504 wireless controller and 3 aironet 1142 access points using the basic config on a windows sbs 2008 domain, the problem is that the clients that are connected to the 2504 aint getting the there ip addr from the AD but from the wireless controller, and there cant reach the clients on wifi from the clients that are connected to lan, is there anyway that i cant change this so that a client on lan can see the client on wlan and vice versa.
View 5 Replies
View Related
Mar 11, 2012
I have 8 no. AIR-LAP1131AG-A-K9 and WLC 2112 Wireless LAN Controller,i configured the device and its working at deffent SSIDs but when i am trying to enable same SSID on all LAP it shows "AP on dupplicate SSID found and Layer 2 security found".
View 1 Replies
View Related
Dec 22, 2009
We have multiple Cisco Aironet 1131AG devices, all wired on one Cisco L2 switch(2560) who is connected to L3 switch (3550). We assigned one VLAN for access point in L3 switch who acts as vtp server (L2 switch is vtp client). All ap's will have static ip address and all will have same SSID and no security and they will be using multiple channels (ex. 1,6,11). They will operate in 3 floor building for roaming wireless client. We won't using any wireless controller.
How to configure APs-all the same with different ip's, can we use L3 switch to create dhcp server for access points VLAN (pool for clients, and the rest for static ip for ap's)?
View 2 Replies
View Related
Feb 13, 2012
I have WLC 4404 Controller with 180 LWAPP. i want to disable Broadcast SSID from some specified APs not all. is it possible to do that with 4404 WLC controller.
View 9 Replies
View Related
May 27, 2012
I'm working with some 891W's that have the internal 800-series AP. I have this router set up initially using Cisco Config Express, then, using Cisco Config Professional 2.5 I set up the firewall and other featuress that CCE doesn't do. Overall this is a very simple router, meant to be a small business Internet gateway device but is currently in my lab.
The intended WLAN setup is very simple. One SSID, with broadcast enabled, using WPA2-Personal. Auth: open Encryption is both TKIP and AES-CCM.
However no matter what I do I cannot get thhis thing to broadcast . In the past I had sometimes run into issues where if I had more than one AP running independently it would cause a channel conflict and one or both would cancel each other's radio, so I disabled all other AP's in my vicinity.
Also I've had issues in the past where f I enabled both TKIP and AES, sometimes clients can't find the AP as a result. My solution had been to disable one of them leaving just the other - no change here however.
Via the IOS, ssid config shows mbssid guest-mode which I believce is default.
Interestingly, if I do the following:
ap# Config t
ap(config)# dot11 ssid <myssid>
ap(config - ssid)#guest-mode
end
I end up with both "guest-mode" and "mbssid guest-mode" in the sh run for the AP, and voila, my AP broadcasts the SSID. However clients end up joining without any security at all, no prompts for pre-shared key or anything.
View 7 Replies
View Related
Nov 1, 2011
Everytime I disable SSID Broadcasting 2 extra wireless connections appear available connections list. (See wirelessconnections.jpg) One is blank and one is labeled Other Network. They disappear when I enable SSID Broadcasting. I am not sure why this is happening.
View 5 Replies
View Related
Mar 13, 2012
I checked the, do not broadcast SSID in my linksys, now i cant log into the router it is a linksys WRT54GS
View 3 Replies
View Related
Oct 25, 2011
I just set up a brand new LinksysE4200 router at one end of my home, and a Linksys RE1000 range expander at the other end in order to provide full WiFi coverage to my entire house. Everything is working great except for one important detail.. There is currently no way to disable SSID broadcast on the RE1000 range expander! I just flashed it with the latest firmware (v1.0.01 build 2, Jul 22, 2011) , but I'm still unable to disable it, even though it is disabled on the E4200 from which it's receiving the signal it's rebroadcasting. I am seriously considering returning the RE1000. Linksys. add the ability to disable SSID broadcast on the RE1000 in a (not too distant) future firmware upgrade! As far as I'm concerend, this is a MUST HAVE feature in order for this product to even be considered for use in any sensitive network environment.
View 2 Replies
View Related
Nov 21, 2012
How can you disable SSID broadcast on EA6500 wireless network.
View 4 Replies
View Related
Jul 28, 2011
How do I disable the broadcast of my SSID? I do not want wireless. I only bought this router to hook up two computers to the internet via Ethernet cable.
View 9 Replies
View Related
Mar 21, 2013
EA3500, I'm using the Smart Wi-Fi interface through a browser. How do I make my router broadcast the SSID? I think it was when I was setting up using the old interface, before updating the firmware, that I set it to *not* broadcast the network name. Now I feel like I've been all through the menus twice on the Smart Wi-Fi interface, and can't find the on/off toggle.
View 9 Replies
View Related
Nov 8, 2012
Can the broadcast be disabled on EA6500?
View 1 Replies
View Related
Nov 20, 2012
I got E4200 v.2 with the latest cloud firmware. On the previous (non-cloud) firmware there was an option to enable or disable SSID broadcast, and I disable it. Now I want to enable it back, but can not find this option in Cisco Connect Cloud. how to enable SSID broadcast on the E4200 v.2 with Cisco Connect Cloud firmware?
View 1 Replies
View Related
Dec 29, 2012
F9K117 - I can't see my broadcast ssid for the 5ghz band. Is there anything I can do?
View 3 Replies
View Related
Apr 26, 2013
We have a cisco 2500 wireless controller with LAPs.Our devices require Broadcasting to be enabled. So I had to enabe broadcast forwarding under the Controller tab.It appears this option is a global seeting. Is there a way to enable Broadcast Forwading for an specific WLAN or SSID?Can we isolate broadcast data to an SSID or a WLAN?
View 1 Replies
View Related
Feb 22, 2013
I am the latest firmware of EA2700 but why I can't find there is disable broadcast SSID function?
View 1 Replies
View Related
Dec 1, 2011
why my SSID still displays even though I have the SSID Broadcast "Disabled" for 5 GHz and 2.4Ghz configurations. The name of my network shows full signal strength and a lock next to the name but I was under the impression if I have disabled the SSID broadcast it shouldn't show up at all and would force a user to manually input the network name when trying to connect to it. I have the router configured to only allow certain MAC addresses wireless access as well. Router is running Firmware Version: 1.0.03.Also, my primary computer my iMac running 10.7.2 boots up or is brought out of sleep mode I constantly need to go up to the top of my screen and re-select my network.
View 4 Replies
View Related
Sep 7, 2011
i have a e3000 set up with my network i have guest network set up through the cisco connect but dont see a field to change the guest network broadcast ssid so an ideas?
View 1 Replies
View Related
Feb 15, 2011
When disabling SSID broadcast and enabling MAC address filtering on WAG320N, my other wireless laptop get disconnected. And when you try to connect, it doesn't connect again.
View 3 Replies
View Related
Jan 26, 2012
E4200 not letting my known wireless devices connect when SSID Broadcast is turned off.
View 1 Replies
View Related
Jul 1, 2011
I was quite excited about E4200 I got yesterday. Everything works perfect except front LED light start blinking a few hours later. Don't know why it happens in a sudden and non-stop. After several tries, I found that disabling SSID broadcast for both 2.4 and 5GHz stops the blinking.Of course, before doing that, I upgraded firmware to 1.0.02, reset to factory defaults and finally set up E4200 manually rather than using Cisco Connect. Now the LED light is continuously lit.
View 4 Replies
View Related
Nov 3, 2012
It,a possible configure 2 ssid with wlc 2504 and lap 1042n? It,s possible configure 2 ssid with support 802.11n?
View 1 Replies
View Related
Nov 28, 2012
I have a client with a WLC 2504 that wants to route "guest" users through a gateway appliance "radiusgateway.com" and all others through the network. It appears to me this would require the use of two fa ports on the WLC. One directly connected to the radiusgateway (which is connected to a switchport) and the other fa interface connected directly to a switchport bypassing the proxy server.
My issue is, "how do you segment the ssid traffic via the WLC". The interfaces cia the gui aren't that intelligent, there's an enable and logging drop down. Via the command line, I didn't see any methods of routing traffic.
View 1 Replies
View Related
Jan 17, 2013
My customer need creates some separately web portal for some SSID (Guest and Staff), 01 web portal for Guest and 01 Web portal for Staff. Can WLC2504 can support this features ?
View 2 Replies
View Related
Apr 3, 2012
Can I configure Multiple SSID (Guest/Corporative) on Cisco Aironet 3600i AP via Cisco 2504 Wireless controller?
View 1 Replies
View Related
Jan 3, 2012
I am tasked with configuring a 2504 wireless controller. Is it possible to assign an SSID to an interface that has dynamic ap management enabled?
Scenario:
Location1:
1) 10.0.0.0/24
2)192.168.0.0/24 DMZ
Location 2:
1) 10.0.5.0
Both locations are routable using network 1 at each location. However, I need to configure several access points and send them to location 2. These access points will communicate with the controller at location 1 on network 1. Two SSIDs will need to be on network 1 at location 1. The other SSID will be on Network 2 at location 1. This network is not routable.
View 32 Replies
View Related
May 2, 2012
We are deploying 3600 AP's with a 2504 and would like to create multiple SSID's that are mapped to unique VLANs so we can control the traffic at the Firewall. We have the 2504 up and running with AP's but there appears to be no where in the 2504 controller Web GUI to configure a VLAN mapping to an SSID. Any pointers to documentation on how to configure?
View 1 Replies
View Related
Jul 24, 2012
My computer recently (two months ago) became unable to connect to various websites such as Facebook, various web comics, and Slashdot. The weird part is that I can ping the websites and get returns. Also I can connect to Spotify, YouTube, Netflix fine. This tells me it isn't a bandwidth issue. I also have troubles with Dyn Updater and Drop-box not connecting, this tells me it isn't a chrome problem. My laptop can access everything fine from the same connection.I have reformatted my desktop hard drive and the problem returns.
View 1 Replies
View Related
May 24, 2011
I have replaced my father's wired modem (he's with [url]... in the UK) with a Belkin Surf+ (F7D2301uk) router running firmware version 1.00.16. When he tries to access the network from his Tosh C660 Win 7 Home Premium, 64bit laptop the network connection between the laptop & router disconnects after a minute or so. The only way to reestablish a connection is to Disconnect and Connect again in the Wireless Network section of Networking panel. But here's the weird bit. My own Mac Book keeps connected fine without any problems as does my Sony Ericsson X10 phone.
View 1 Replies
View Related
Sep 22, 2011
if there is a wireless adhoc network and i want to provide the security to the data which i want to transmitt over this network but i dont want to encrypt the whole data but to apply encryption in a part of data which conatins the important information.
View 1 Replies
View Related
