Cisco Switching/Routing :: 3560 - System Returned To ROM By Error
Dec 16, 2011My switch is getting restarted and the error shown is : System returned to ROM by error - Debug Exception (Could be NULL pointer dereference)
View 4 Replies
ADVERTISEMENT
Cisco Switching/Routing :: 3560 - System Returned To ROM By Address Error At PC 0x0
Jun 7, 2012We have observed that one of the 3560 switch was rebooted with "System returned to ROM by address error at PC 0x0, address 0x0"
View 1 Replies View RelatedCisco Switching/Routing :: System Returned To ROM By Reset SP Error Of 7606-S
Jan 15, 2012I have my router 7606-S rebooted by itself. According to output of show version command it's rebooted by software bug.
================ Snipped from crashinfo file =================
Jan 14 05:33:50.822 GMT+7: %C7600_MEM_ECC-2-MBE: Multiple bit error detected at 0xC09F4D38
Jan 14 05:33:50.822 GMT+7: %C7600_MEM_ECC-3-SYNDROME_MBE: 8-bit Syndrome for the detected Multi-bit error: 0x0
05:33:50 GMT+7 Sat Jan 14 2012: Unexpected exception to CPU: vector 1500, PC = 0xB7922BC , LR = 0xB792250
==================== Show Version ======================
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(1)S1, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 10-Feb-11 19:27 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(1)S1, RELEASE SOFTWARE (fc1)
[Code]...
Cisco WAN :: 3845 System Returned To ROM By Bus Error At PC
Jan 26, 2012I have an 3845 router:Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.4(11)XJ4, RELEASE SOFTWARE (fc2)After an unexpected reboot it says: System returned to ROM by bus error at PC 0x6323F398, address 0xB0D0B39 at 12:35:09 GMT Fri Jan 27 2012..To troubleshoot this error I need to find out what kind of processor this router has. It doesnt fall in either of the categories descibed in url...
View 4 Replies View RelatedCisco WAN :: 7206 System Returned To ROM By Error
Mar 16, 2011I have problem with the WAN Router 7206. It has been reloaded automatically 2 times since yesterday. [code] I have already put this message to the output interpreter and the solution is upgrading to the latest IOS. But, when I search in the Bug Toolkit about SegV problem, this bug status is still "Open". So, how can I upgrade to the latest IOS if the status of this bug is still open?
View 2 Replies View RelatedCisco WAN :: System Returned To ROM By Bus Error - 7200-G2
Dec 19, 2011When i was changing the class-maps i get lost the router. I have attached the crash log file, am i hitting a bug here? I have many times modified the class-maps on the go without any issues.
View 4 Replies View RelatedCisco WAN :: 3825 System Returned To ROM By Bus Error 0x6125DCFC
Aug 29, 2012I have a router cisco 3825, It is being restarted autometically. and gives a message "System returned to ROM by bus error at PC 0x6125DCFC, address 0x15A3C78B" in show ver.
View 5 Replies View RelatedCisco WAN :: 7206VXR NPE-G2 Crash - System Returned To ROM By Bus Error?
Dec 27, 2012I noticed that my router 7200 was reboot for a bus error. The error occurred while the system was operational. After the restart the router works properly for more than 6 days.
This is the sh ver:
Cisco IOS Software, 7200 Software (C7200P-IPBASEK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 28-Oct-10 22:57 by prod_rel_team
[code].....
Seems that the error "System returned to ROM by bus error at PC 0x2E0BF30, address 0x0" should be a special type of bus error crash is when the crash is caused by a corrupted program counter (PC). The PC value is the location of the instruction which the processor was executing when the bus error occured. In this case, the PC has jumped to the address 0x0 (probably because of a null pointer), but this is not where the instruction is located.
Can I consider this as a processor memory parity errors and wait for a second parity error before I replace anything?
Cisco Infrastructure :: 7206 Router Self Reboot / System Returned To ROM By Bus Error
Sep 10, 2012Whenever I want to turn off the ip cache flow and enter command "no ip flow egress" on a router interface, the router will self reboot and returned with the error message - System returned to ROM by bus error at PC message in the show version ouput.
I tried on two different routers below here and both also undergoing a cold restart when I key in the command "no ip flow egress" on the said interface
1) Cisco 7206 running IOS 12.4(1c)
interface GigabitEthernet0/1
ip address 10.20.10.2 255.255.255.0
ip flow egress
duplex auto
speed auto
end
when I key in "no ip flow egress" under int gi0/1 and the router self restarted and return the message Router uptime is 3 minutes System returned to ROM by bus error at PC 0x606D48FC,address 0x0
2) Cisco 3845 running IOS 12.4(3e)
interface GigabitEthernet0/0
ip address 10.20.20.2 255.255.255.0
ip nbar protocol-discovery
ip flow egress
duplex auto
speed auto
end
when I key in "no ip flow egress" under int gi0/0 and the router self restarted and return the message
Router uptime is 3 minutes System returned to ROM by bus error at PC 0x6007EBE0, address 0x0
Cisco Switching/Routing :: 3560 - Portable Redundant Power System For Catalyst Switches?
May 10, 2012Does a portable RPS device either from Cisco or another manufacturer exists, that would allow you to move primary power for a switch without causing an outage? I realize that for the Catalyst 3560 for example, you can get an RPS 2300 or 675, but my understanding is that these are made for a more permanent installation, not to mention rather costly.
It looks like the RPS 675 is rather inexpensive after all, especially in the secondary market, but still rather large for toting around.
Cisco Switching/Routing :: 3560 Multiple Vlan Access To Port Connecting Phone System
Oct 25, 2012I'm new to networking and was looking for some assistance. First off im using packet tracer to diagram my senario as I will be receiving my equipment next week to deploy.
Hardware to be used:
1. 2 catalyst 3560 switches
2. all connect to a sonic wall router
I have two companies that work in the same office space. I need to keep these companies seperate on their own vlan. They will however need to share the phone system.(Packet tracer file uploaded to give those who have the time to see what I put together.) [code]
Cisco Switching/Routing :: 3560 Goes To Error-disable
Jun 25, 2012I have port on cisco 3560 goes to error-disable,what is the cause of this issue,pls be noted this interface has BPDU Guard enable
View 3 Replies View RelatedCisco Switching/Routing :: 3560 - Gi Ports Have Outdiscads Error
May 15, 2012 have problem with switch. 3560, Some of gi ports have outdiscards errors and switching is very slow.
ServerSwitch>show int counters errors
Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Gi0/1 0 0 0 0 0 8722
Gi0/2 0 0 0 0 0 157
Gi0/3 0 0 0 0 0 0
Gi0/4 0 0 0 0 0 0
Gi0/5 0 0 0 0 0 0
Gi0/6 0 0 0 0 0 446
Gi0/7 0 0 0 0 0 0
Gi0/8 0 0 0 0 0 0
Gi0/9 0 0 0 0 0 0
Gi0/10 0 0 0 0 0 0
Gi0/11 0 0 0 0 0 0
Gi0/12 0 0 0 0 0 1705658
Gi0/13 0 0 0 0 0 9
Gi0/14 0 0 0 0 0 74
Gi0/15 0 0 0 0 0 0
Gi0/16 0 0 0 0 0 0
Gi0/17 0 0 0 0 0 9
Gi0/18 0 0 0 0 0 0
Gi0/19 0 0 0 0 0 0
Gi0/20 0 0 0 0 0 0
Gi0/21 0 0 0 0 0 0
Gi0/22 0 0 0 0 0 0
Gi0/23 0 0 0 0 0 922
Gi0/24 0 0 0 0 0 0
But in monitoring i see only 80 Mbit max bandwith utilization on gigabit links.
Cisco Switching/Routing :: 3750 And 3560 - IP ARP Inspection Error In Windows 7
Jun 14, 2010We have ip arp inspection and dhcp snooping enable in couple of 3750 and 3560 switches. Everything works fine, excepted few case that DAI packet rate trigger and errdisable the port. Later on we found out that most of computer that trigger DAI is Windows 7 and especially when they are in sleep mode. Not sure if anyone experiencing it with Windows 7. Also we have it rate limit at 64.
View 2 Replies View RelatedCisco Routers :: RV120W - Error / EndChantRecv / Protocol PNAC Returned / Ok
May 13, 2012what does this log message mean? (RV120W fw 1.0.3.10)
2012-05-14 19:59:26 warning HERMES kern KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK
2012-05-14 19:59:26 warning HERMES kern KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK
2012-05-14 19:59:26 warning HERMES kern KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK
2012-05-14 19:59:26 warning HERMES kern KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK
2012-05-14 19:18:46 warning HERMES kern KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK
2012-05-14 19:18:46 warning HERMES kern KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK
2012-05-14 19:13:36 warning HERMES kern KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK
[code]....
Windows 7 - Error Code 0x000005b4 / Operation Returned Because Timeout Period Expired
Nov 1, 2012I got this error this operation returned because the timeout period expired error code 0x000005b4
View 1 Replies View RelatedCisco Switching/Routing :: Input Error And CRC Error On Router 1841?
Mar 12, 2013The router 1841 is connected directly to the layer switch. the network diagram is below:
Office A --> Switch (L3) --> Router 1841 --> Internet --> Office B
However, when I transfer the file from Office A to office B, the speed very slow ( only around 40 kb/second), and there are an input error and CRC error:
Cisco-R1841#sh interfaces FA0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0019.e02f.03dd (bia 0019.e02f.03dd)
[Code]......
Cisco Switching/Routing :: Catalyst WS-C3750G-48TS-E - Virtual Switching System
Sep 10, 2012I would like to know if Catalyst WS-C3750G-48TS-E recognizes and understand Cisco VSS ( Virtual Switching System) . Is there a List available which tells us which Old Catalyst Switches or current switches understand Cisco VSS?
View 3 Replies View RelatedCisco Switching/Routing :: 3560 Policy Based Routing Verify-availability
Apr 19, 2012Cisco 3560 does not support "set ip next-hop verify-availabilty". I need this command in my config. "set ip next-hop" do not do the same job.
View 8 Replies View RelatedCisco Switching/Routing :: Cat 3560 No Switchport Command Test Out Routing With Switch
Dec 8, 2011The last few days I've been exploring options in getting rid of some old routers accross a wan connections. I have a cat 3560 to play with and I thought I would try and use the no switchport command test out routing with switch. I've got some type of route issue and I tried a few things which I thought would fix the issue but had no effect. I'll post the config and a few commands so you can see what the basic setup is.
Here we can see in the arp that it knows about both 10.7.1.2 (PC unable to ping 10.3.3.254) as well as 10.3.3.254 (ASA).I tried adding in a ip route of 10.7.0.0 255.255.0.0 10.3.3.110 as well as 10.3.3.254. Neither produced the results I wanted allowing 10.7.1.2 (PC) to ping the ASA (10.3.3.254). [code]
Cisco Switching/Routing :: 3560 VLAN Routing Between Switch And Router
May 8, 2012I have an environment of 3 X 3560G of which I have 1st switch-CORE(f0/10) connecting to the VPN router(CE) interface-f0/0. Remaining 2 Cisco 3560's(Access) are connected to Gi0/1 and Gi0/2 on the 1st switch-CORE via gi0/1 . On all three switches I have created multiple VLANs and assigned ports to these VLAN. The switch to switch connection is trunk allowing all VLANs created on all these 3 switches. Now the issue is how I am going to have all these VLANs routed through single interface on the routeri-e f0/0, as all these subnets will communicating to remote site over VPN. What should be default gateway on the 2 Access switches and the CORE switch, also what static route should be on router to reach all subnets(VLANs) created on these 3 switches.
I have read inter-VLAN routing i-e creating sub interfaces on router but dont want to proceed with that and looking for any other way to have my VLANs talk on all three switches and then are accessible to remote site ove VPN?
Cisco Switching/Routing :: Make Policy Based Routing On 3560?
Apr 17, 2012I have tried to make policy based routing on Cisco 3560. I use ipservices ios (SW version 12.2.(50)SE3 and SW-IMAGE C3560-IPSERVICESK9-M) For below configuration there is no problem and pbr is working.
“Access-list 100 permit ip host 1.1.1.1 host 2.2.2.2
Access-list 101 permit ip host 1.1.1.1 host 3.3.3.3
Route-map pbr1 permit 10
Match ip address 100
Set ip next-hop verify-availability 1.1.1.2 1 track 11
interface fasthethernet 0/1
ip policy route-map pbr1”
But when i add another sequence to the "pbr1" with another sequence number like that.
“Route-map pbr1 permit 11
Match ip address 101
Set ip next-hop verify-availability 1.1.1.3 1 track 12”
pbr is not working. Switch gives message "PLATFORM_PBR-3-UNSUPPORTTED_RMP:Route-map pbr1 not supported for Policy Based Routing”"ip policy route-map pbr1" command not shown in the running config. And "show ip policy" output is blank.Configuration guide says you have insert many sequence to the route-map with the same name. And also this command is not in the unsupported command list.
Cisco Switching/Routing :: Routing Secondary Network On 3560 Switch
Jun 4, 2013I am trying to get my workstation to talk to a workstation on a different sub-net through a Cisco 3560 switch. The switch is running the following IOS version: [code]
My primary network is 172.16.0.0 and I am trying to connect to a device on a 192.168.111.0 sub-net. [code]
What would be the best way to get the two workstations talking via the switch?
Cisco Switching/Routing :: 3560 - Access List On InterVLan Routing
Dec 11, 2012I implemented access list on cisco 3560 switch but it never works. I want to block access from network B to Network A and allow from Ato B
Network A. 10.0.12.0/24
Network B 10.0.24.0/24
The configuration is
interface Vlan1
description Data VLAN
[Code].....
Cisco Switching/Routing :: 3560 - Unable To Perform VLAN Routing
Apr 28, 2012We recently purchased Cisco 3560X Layer3 Switch. We need to perform simple Inter VLAN routing. We have configured VLAN1 (name-server_vlan) and VLAN2 (name- user_vlan). We have also assigned the Ports and IP address to both the VLANs. After assiging this if we plug Laptop A into VLAN1 then it doesnt communicates with Laptop B (btw, Laptop A is able to Ping VLAN2 Gateway ) in VLAN2 but on the other hand Laptop B is able to communicate with Laptop A and ping everything i.e. Gateway of VLAN1.
View 17 Replies View RelatedCisco Switching/Routing :: Catalyst 3560 - Routing Enabled With / Without Default Gateway Or IP Route Command
Feb 25, 2013We have two catalyst 3560 switches running c3560-ipbasek9-mz.122-58.SE2.bin They are connected using etherchannel using gi 0/21 - 24 interfaces.
on 3560-1 switch, there isn't any ip-default gateway or ip route configured. It only have 1 interface vlan configured.
on 3560-2 switch, there is ip default gateway configured along with 1 interface vlan.
What i dont understand here is that, i can reach out to other subnets from 3560-1 switch in which the routing is not enabled?
Cisco Switching/Routing :: 2504 WLC / 3560 Catalyst Routing
Oct 21, 2012 I have a 2504 WLC connected to a Catalyst 3560 which has multiple vlans and is connected to a 2800 series router. I know the catalyst is L3 but I am needing nat functions to get outside to the internet. From my 2800 series router I am able to ping out to the internet, also I am able to ping the vlan interfaces on the catalyst switch. Problem is from the catalyst switch I can ping the inside and outside address of the 2800 but I cannot get any further then that. I cannot ping the 2800 router gateway. Not sure what I am doing wrong as far as routing.
I've attached my 2800 and 3560 configs.
PS3 System - Error Has Occurred (80023121)?
Apr 28, 2011i have a problem with the playstation 3 system when i sign in it takes a while todo that all of a sudden a error appeared on my screen saying "An error occured (80023121)" and me and my dad try to fix the problem but nothing seems to be working
View 1 Replies View RelatedCisco Switching/Routing :: C4948 - Message In System Log
Apr 29, 2013I'm using "WS-C4948(12.2(54)SG)+PWR-C49-300AC/2". The following message are logged in the system log, but it was to check the status with the show command and status LED, but there was no abnormality. I thought the power supply has failed, but I seem different.
040861: Apr 27 07:00:50: %C4K_IOSMODPORTMAN-4-POWERSUPPLYBAD: Power supply 1 has failed or been turned off
040862: Apr 27 07:00:50: %C4K_IOSMODPORTMAN-4-POWERSUPPLYFANBAD: Fan of power supply 1 has failed
I checked.>> #show environment alarm no alarm
#show environment status power supply
Power Fan Inline
Supply Model No Type Status Sensor Status
------ ---------------- --------- ----------- ------- -------
PS1 PWR-C49-300AC AC 300W good good n.a.
PS2 PWR-C49-300AC AC 300W good good n.a.
All Status LEDs are green.
Cisco :: VG224 On Boot File System Error
Nov 29, 2012Cisco VG224 (R527x) processor (revision 4.1) with 119808K/11264K bytes of memory. Processor board ID FGL150411MN, R527x CPU at 225MHz, Implementation 40, Rev 3.1, 1 On-Board Twenty-Four FXS Analog Voice Module V2.1, 2 FastEthernet interfaces, DRAM configuration is 64 bits wide with parity disabled. 63K bytes of non-volatile configuration memory. System fpga version is 250027, % Crashinfo may not be recovered at flash:crashinfo, % This file system device reports an error.
View 4 Replies View RelatedCisco Switching/Routing :: 6509 BGP X Autonomous System Specification
Mar 25, 2012I am trying to configure BGP on 6509 IOS. I can not specify a long interger for autonomous system: ASN: 262829 (32 bits)
View 1 Replies View RelatedCisco Switching/Routing :: ASA 5505 - There Are No Upgrades Available / System Is Up To Date
Feb 25, 2013I have seen this on 4 ASA devices:At devices running older versions than 8.4(5) it is possible to update to 9.1.1 but after updating to 8.4(5) the devices tells me that "There are no upgrades available, your system is up to date" when I "Check for ASA/ASDM updates". I downgraded one device to 8.4.4 and tried to upgrade to 9.1.1 but the update was unsuccesfull (could not boot).
View 1 Replies View RelatedCisco Switching/Routing :: System Crash 2611 And 3640
Apr 8, 2013I got some unexpected System crash, and this happens to 2 different routers on the same network.. (We suffer a Crash and change the router, happens the same to the new router after some time, maybe 40 minutes!!)
Here is the last console report for the new router....
%Software-forced reload
Preparing to dump core...
4w1d: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = IP NAT Age
[Code]....
