Cisco WAN :: 7206VXR NPE-G2 Crash - System Returned To ROM By Bus Error?
Dec 27, 2012
I noticed that my router 7200 was reboot for a bus error. The error occurred while the system was operational. After the restart the router works properly for more than 6 days.
This is the sh ver:
Cisco IOS Software, 7200 Software (C7200P-IPBASEK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 28-Oct-10 22:57 by prod_rel_team
[code].....
Seems that the error "System returned to ROM by bus error at PC 0x2E0BF30, address 0x0" should be a special type of bus error crash is when the crash is caused by a corrupted program counter (PC). The PC value is the location of the instruction which the processor was executing when the bus error occured. In this case, the PC has jumped to the address 0x0 (probably because of a null pointer), but this is not where the instruction is located.
Can I consider this as a processor memory parity errors and wait for a second parity error before I replace anything?
I have an 3845 router:Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version 12.4(11)XJ4, RELEASE SOFTWARE (fc2)After an unexpected reboot it says: System returned to ROM by bus error at PC 0x6323F398, address 0xB0D0B39 at 12:35:09 GMT Fri Jan 27 2012..To troubleshoot this error I need to find out what kind of processor this router has. It doesnt fall in either of the categories descibed in url...
I have problem with the WAN Router 7206. It has been reloaded automatically 2 times since yesterday. [code] I have already put this message to the output interpreter and the solution is upgrading to the latest IOS. But, when I search in the Bug Toolkit about SegV problem, this bug status is still "Open". So, how can I upgrade to the latest IOS if the status of this bug is still open?
When i was changing the class-maps i get lost the router. I have attached the crash log file, am i hitting a bug here? I have many times modified the class-maps on the go without any issues.
I have a router cisco 3825, It is being restarted autometically. and gives a message "System returned to ROM by bus error at PC 0x6125DCFC, address 0x15A3C78B" in show ver.
Whenever I want to turn off the ip cache flow and enter command "no ip flow egress" on a router interface, the router will self reboot and returned with the error message - System returned to ROM by bus error at PC message in the show version ouput.
I tried on two different routers below here and both also undergoing a cold restart when I key in the command "no ip flow egress" on the said interface
1) Cisco 7206 running IOS 12.4(1c)
interface GigabitEthernet0/1 ip address 10.20.10.2 255.255.255.0 ip flow egress duplex auto speed auto end
when I key in "no ip flow egress" under int gi0/1 and the router self restarted and return the message Router uptime is 3 minutes System returned to ROM by bus error at PC 0x606D48FC,address 0x0
2) Cisco 3845 running IOS 12.4(3e)
interface GigabitEthernet0/0 ip address 10.20.20.2 255.255.255.0 ip nbar protocol-discovery ip flow egress duplex auto speed auto end
when I key in "no ip flow egress" under int gi0/0 and the router self restarted and return the message
Router uptime is 3 minutes System returned to ROM by bus error at PC 0x6007EBE0, address 0x0
I have my router 7606-S rebooted by itself. According to output of show version command it's rebooted by software bug.
================ Snipped from crashinfo file ================= Jan 14 05:33:50.822 GMT+7: %C7600_MEM_ECC-2-MBE: Multiple bit error detected at 0xC09F4D38 Jan 14 05:33:50.822 GMT+7: %C7600_MEM_ECC-3-SYNDROME_MBE: 8-bit Syndrome for the detected Multi-bit error: 0x0 05:33:50 GMT+7 Sat Jan 14 2012: Unexpected exception to CPU: vector 1500, PC = 0xB7922BC , LR = 0xB792250
==================== Show Version ====================== Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(1)S1, RELEASE SOFTWARE (fc1) Technical Support: [URL] Copyright (c) 1986-2011 by Cisco Systems, Inc. Compiled Thu 10-Feb-11 19:27 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1) BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(1)S1, RELEASE SOFTWARE (fc1) [Code]...
I got some unexpected System crash, and this happens to 2 different routers on the same network.. (We suffer a Crash and change the router, happens the same to the new router after some time, maybe 40 minutes!!)
Here is the last console report for the new router....
%Software-forced reload
Preparing to dump core... 4w1d: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = IP NAT Age
I am having trouble with gathering inventory for 7206 XVR devices. I got this error:
RICS0001:Internal Error,unable to process the collected data from the device
How can I make the inventory work for these devices ?
Here's an excerpt from IC_Server.log:
[ Tue Nov 29 16:24:53 CET 2011 ],ERROR,[Thread-31],com.cisco.nm.rmeng.inventory.ics.server.InvDataProcessor,458,SQL Anywhere Error -193: Primary key for table 'MemoryPool' is not unique
I had been using my Linksys wireless-G PCI adapter WMP54Gv4 in a PC running XP (SP3) and an Airport Extreme wireless router for the past 4 or 5 years without any issues. Then recently, my wireless signal had become flaky on all client machines (on both PC and various Macs, which reported weak signal and kept dropping and searching for a new PPPoE from my DSL line). AT&T verified our line was fine and even sent a new modem but troubles persisted, so I bought a new Airport Extreme last week. This solved the network reliability issue on the Macs just fine.
However, the PC with the WMP54Gv4 adapter now crashes whenever the new Airport Extreme is turned on. There have been no hardware or software changes on the PC, yet it now reliably produces a BSOD stating "DRIVER_IRQL_NOT_LESS_OR_EQUAL". This crash also happens when booting in safe mode with networking. I can avoid the system crash when booting in safe mode without networking or booting normally without my Airport Extreme turned on, though I do see this error: "Linksys Wireless Network Monitor: Access violation at address 0040756D in module EMP54Gv4.exe"
So I cannot run any tests of the PCI card on the machine when the wireless network is on, since the operating system crashes.
The evidence thus points to an explanation where my wireless network from the new Airport Extreme is tripping up the operation of the linksys wireless card in a way that XP hates. I know the wireless network is OK, since it works fine on my Macs. I confirmed that my driver (v3.0.3.0) is still listed as current for this PCI card, so it's not a matter of having an out-of-date driver.
Here's another observation that may be relevant: When I first started using the new Airport Extreme with WPA2 protection, the PC could run without crashing, but it could not connect to the wireless network. I also had trouble connecting via my Macs. Then I switched the Airport Extreme to use WPA/WPA2 security, which is when the network-based PC crashing ensued (though the Macs can now connect just fine).
First of all i do not have that much know how within this field (Although i work for an ISP)
There seems to be a problem with my DIR-655.
#1. As we speak the router is taking down and setting up the connection about 1-2 times pr. minute! the connection uptime is stuck in a infinite loop: 1.12 sec, 1.13, 1.14 and back to 1.12 sec. It comes back from time to time. but this is the second time this have happened.
I have many WiSM WLC's running 7.0.116.0. One WLC was rebooted few days ago but there was no crash file and nothing in logs say why this issue happened.There was a power problem at the same time the WLC rebooted (some switches and PE's was rebooted as well) but if it is a power issue why only one WLC inside the WiSM rebooted and the other WLC is still working fine with no reboot?I have 5 WiSM modules connected to the same 6500 box, only one WLC was rebooted which indicates a crash but no crash file registered for it.Is there anyway I can find the reason why that WLC was rebooted?
i have a problem with the playstation 3 system when i sign in it takes a while todo that all of a sudden a error appeared on my screen saying "An error occured (80023121)" and me and my dad try to fix the problem but nothing seems to be working
Cisco VG224 (R527x) processor (revision 4.1) with 119808K/11264K bytes of memory. Processor board ID FGL150411MN, R527x CPU at 225MHz, Implementation 40, Rev 3.1, 1 On-Board Twenty-Four FXS Analog Voice Module V2.1, 2 FastEthernet interfaces, DRAM configuration is 64 bits wide with parity disabled. 63K bytes of non-volatile configuration memory. System fpga version is 250027, % Crashinfo may not be recovered at flash:crashinfo, % This file system device reports an error.
Just upgraded our WCS server to the 7.x code over the weekend. Turned up the first 3500 series AP's today. The AP's have been up for about an hour. I am seeing the Air Quality graphs on WCS. On the Worst 802.11a/n and 802.11b/g/n Interferers windows, I am see a WCS System Error Page message but only in those windows. I have gone over the documentation and dont see that I need to enable anything else on WCS.
Trying to install WMP54G v4.0 on XP SP3. I have tried all three PCI slots. Removing driver RT2500.SYS system will boot. Put it back and BSOD Error:driver_irql_not_less_or_equal
I'm trying to connect my new Dell Dimension 8400 (3.0Ghz/512Mb/XPsp1) to my home wireless network. I installed two diiferent PCI adapter cards in my one available PCI slot -- an older D-Link (11b) and a brand new Netgear (11g) (which Dell Sales assured me is compatible). Both cards detected my Netgear wireless router and provided an excellent internet connection, so I'm assuming they were seated properly. The problem is that every time I shut down the system I get the blue screen of death with the following message:
-Hardware Malfunction -NMI: Parity Check/Memory Parity Error -The System has halted
The system runs and shuts down perfectly when the PCI cards are removed. D-Link and Netgear Support technicians told me I have to contact Dell, but Dell Support doesn't seem to have an answer for me. Which wireless PCI adapter cards are truly compatible with Dell hardware?
I have Dell Inspiron 15 3520 laptop bought in December 2012 with Windows 8 Pro. It was working fine until two days ago. I am unable to obtain DHCP lease either through wireless or wired network. After troubleshooting, I found DHCP service is not running and try to restart but of no avail.I ran sfc /scannow and the results are OK.
Recently I faced 1 issue in MLS 6509.MLS had all Gig modules in slots 6,7,8 taking System detected CRC error rate on port ASIC data bus exceed fatal threshold, ("System detected CRC error rate on port ASIC data bus exceed fatal threshold".) causing the module reset by the SUP. After this active SUP causing it to failover the standby. This process was continuing every few minutes resulting in the SUPs on MLS rolling.what could be the issue for Sup rolling reset?
I have a new Win 7 Dell Precision Workstation that will not log in to my domain. I get an error that there is no login server available if I attempt to log in using a domain account. I log in as the local admin and then try to join a domain using the Join a Domain or Workgroup wizard. I then get an error stating "this operation returned because the timeout period expired". I have had to reset my core switch to get a couple of the new boxes (including this one) to even join the domain. I also show no internet in the Network and Sharing Center most of the time.
I have a Cisco 7206VXR with NPE-400. The IOS version is 12.4(24)T3. I installed a SA-VAM in the router in slot 6 but getting the following on the console.
AP-Pune-RT#Feb 23 11:16:34.484: %PA-3-NOTSUPPORTED: PA in slot6 (Unknown (type 650)) is not supported on this chassisFeb 23 11:16:34.484: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:34.584: %PA-2-PABRIDGE: Failed to config bridge for PA 6Feb 23 11:16:35.384: %PA-4-IMPROPER_REMOVAL: Improper removal for slot 6.Feb 23 11:16:35.384: %PA-3-DEACTIVATED: port adapter in bay [6] powered off.Feb 23 11:16:35.468: %CRYPTO-4-PKT_REPLAY_ERR: decrypt: replay check failed connection id=975, sequence number=677864
Is the SA-VAM not supported in the Router 7206VXR?
We have a 7206VXR with an NPE-G1 processor. We're running the standard stuff on it, but here are the highlights.We just enabled netflow on it to send the data to an external source for analysis and the overall CPU level increased, but not significantly. About what should we expect for the overall CPU level? At this point, it's averaging close to 40% during peak hours.
System Bootstrap, Version 12.4(12.2r)T, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 2006 by cisco Systems, Inc.Socket jumper: not present Failsafe jumper: present = normalFPGA revision 0x00000026C7200 platform with 2095104 Kbytes of main memory
Readonly ROMMON initialized
Self decompressing the image : #################################################################################################################################### [OK] %ERR-1-SRAM: Bus error on SRAM interface%ERR-1-FATAL: Fatal error interrupt, No reloadingerr_stat=0x80, err_enable=0xFF, mgmt_event=0x10
System bridge dump: PCI B:3 D:0 F:0 Reg:0x00: device and vendor id = 0x648511ABPCI B:3 D:0 F:0 Reg:0x04: status and command = 0x02B00000PCI B:3 D:0 F:0 Reg:0x08: class code and rev id = 0x05800004PCI B:3 D:0 F:0 Reg:0x0C: hdr type, lat timer and cls = 0x80804000PCI B:3 D:0 F:0 Reg:0x10: PCI CSN0 BAR (LOW) =
I am observing very high CPU utilization on my Cisco 7206VXR (NPE-G1) Router. We have done all the necessary troubleshooting but not able to identify root cause. [code]
