D-Link DIR-655 :: Connection Uptime Error DHCP Crash?
Feb 9, 2012
First of all i do not have that much know how within this field (Although i work for an ISP)
There seems to be a problem with my DIR-655.
#1. As we speak the router is taking down and setting up the connection about 1-2 times pr. minute! the connection uptime is stuck in a infinite loop: 1.12 sec, 1.13, 1.14 and back to 1.12 sec. It comes back from time to time. but this is the second time this have happened.
[Code].....
View 14 Replies
ADVERTISEMENT
Jan 16, 2013
I get frequent internet disconnects. Sometimes when I notice I can't get into the web gui; other time I can get in but I have to re-authenticate, and I see the wan port is re-initializing. So of course, the "WAN uptime" starts again at zero. I can then look at the "statistics" page and see that the LAN packets are really low (like low 4 digits). SO, my guess is the router is randomly resetting. But how can I check the router uptime?? I searched and I see plenty of folks reporting their uptimes, but I can't find it anywhere in the GUI. I want to be able to prove that it's the router and not the cable modem or WAN connection....I was getting the logs emailed, but really can't decipher anything. I have "system activity", "attacks", and "notices" enabled. It's DIR-655, hardware B1, firmware 2.10NA.I already emailed DLINK support asking for a warranty replacement, as this one is only 10 months old. If they don't come through, it's time to jump ship to a new vendor. Will be my second dead one in under a year.
View 7 Replies
View Related
Dec 27, 2012
I noticed that my router 7200 was reboot for a bus error. The error occurred while the system was operational. After the restart the router works properly for more than 6 days.
This is the sh ver:
Cisco IOS Software, 7200 Software (C7200P-IPBASEK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Thu 28-Oct-10 22:57 by prod_rel_team
[code].....
Seems that the error "System returned to ROM by bus error at PC 0x2E0BF30, address 0x0" should be a special type of bus error crash is when the crash is caused by a corrupted program counter (PC). The PC value is the location of the instruction which the processor was executing when the bus error occured. In this case, the PC has jumped to the address 0x0 (probably because of a null pointer), but this is not where the instruction is located.
Can I consider this as a processor memory parity errors and wait for a second parity error before I replace anything?
View 2 Replies
View Related
Nov 1, 2011
When I connect to my home network, I get 'No Internet access.' I am running windows 7 on a Toshiba Satellite laptop. I should also mention that my Xbox 360 won't connect either, but both of my friend's laptops as well as my phone do connect to our internet. Also, using my phone as a wifi hotspot works intermittently.
When I do ipconfig /release it says the following:
An error occurred while releasing interface Wireless Network Connection : An address has not yet been associated with the network endpoint.
No operation can be performed on Local Area Connection while it has its media disconnected.When I do ipconfig /renew I get:
An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. No operation can be performed on Local Area Connection while it has its media disconnected.
Ipconfig /all gives me:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Siggy-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
View 1 Replies
View Related
Jun 7, 2013
when this error occurs
we can't see the cdp neighbor and the wireless crash.
we login onto the ap with console , we can see the error log : “Network interrupt loop detected” . last forever
View 3 Replies
View Related
Jun 9, 2012
When I enable IPv6 on my E4200, the Windows 7 DHCP client crashes. It also seems to crash the audio service, the event logger and a few other windows services.
View 9 Replies
View Related
Feb 21, 2012
I have many WiSM WLC's running 7.0.116.0. One WLC was rebooted few days ago but there was no crash file and nothing in logs say why this issue happened.There was a power problem at the same time the WLC rebooted (some switches and PE's was rebooted as well) but if it is a power issue why only one WLC inside the WiSM rebooted and the other WLC is still working fine with no reboot?I have 5 WiSM modules connected to the same 6500 box, only one WLC was rebooted which indicates a crash but no crash file registered for it.Is there anyway I can find the reason why that WLC was rebooted?
View 6 Replies
View Related
May 11, 2010
Ever since setting up this router it has been giving me problems on my laptop, connected wirelessly. At random intervals, throughout the house, an error saying "Connection was reset" comes up in firefox when browsing the web. I've tried resetting the router twice, and updating my network adapter's(Intel 465AGN) drivers. Neither of these worked. No settings on the router were modified, other than enabling the Qos engine. Signal quality isn't the problem either as it is full at all times. On my other computers, three connected through wireless and one through wired, there have been no problems at all and they perform very well.
View 2 Replies
View Related
Aug 12, 2011
I have been using the subject Wireless Router for more than 2 years. Most of the time it worked OK but lately it has been giving issues. [code] Due to a recent power outage, I had to reset the setting on the Dlink router. One of the issue is after resetting the Internet options and rebooting the router when I go back to the system screen, both the Release and Renew buttons are greyed out.I have tried to reboot the router as well as cable modem without any success. The Cable Modem is Motorola SB5120.
View 3 Replies
View Related
Dec 12, 2010
So I just bought a D-link DIR-655. It's a B1 hardware with the 2.00NA firmware. After a few hours the DNS server in the DIR-655 stops responding. This happens on all of the PCs connected to it (both wired and wireless) who have their DNS server set to 192.168.1.1. The only way I've found to recover is to reboot the router, change something in router's the configuration causing the router to re-initialize, or to ping an external site from the ping test console. When this happens the external ISP DNS server are still working (confirmed by NS lookup testing manually setting them).
View 6 Replies
View Related
Mar 31, 2012
'Use Unicasting' is selected by default in the Dynamic IP (DHCP) connection type.I turned it off based upon the router's support text since the router gets an IP address from my cable modem.I don't understand this option at all. I've searched for data on the topic and I can't make sense of it.I think I made the correct selection by un-selecting 'Use Unicasting.'
View 14 Replies
View Related
Apr 20, 2013
problem started a few months ago. wireless kept crashing. tracked it down to seeing it crash when certain Win7 Dell laptop tried to connect. (Laptop is company owned with standard type of corporate AD authentication and image) my wireless setting use WPA2 personal with AES encryption. use both N & G, auto rate and scan.any time this laptop connected the wireless crashed, other devices didn't show SSID (both main and guest)But wired connection continued to work fine.
View 1 Replies
View Related
Oct 28, 2012
I've not found any topic related to what happened to me. Bought two cameras and upgraded the firmware on both as asked, but one of them just stopped. The light is solid green and not red like other posts.Tried the recovery procedure, but the browser won't find my camera. Changed computer IP and everything else that was told to be done. Nothing works!! I also can't find any posts relaled to my problem all over the internet.
View 3 Replies
View Related
Aug 6, 2012
We are running an FWSM on a 6509 with a SUP720. Firmware 3.2(18), in MultiContext Routed Mode, with shared MSFC.Everything runs fine on this baby most of them time, however occasionally without warning and with no specific pattern the Primary node will fail (as in completely stop responding) and the secondary will takover as active. Two get the primary up agian, I reset the hw-module and then no failover active on the secondary to return the primary as active. However, after this event, I start to experience strange issues with connectivity. Certain TCP src dst combinations will just not work.
View 1 Replies
View Related
May 6, 2012
Is it possible to run an uptime report using CWLMS 3.2 ?
View 2 Replies
View Related
Feb 3, 2012
In which case it's useful or needed to timestamp log or debug messages with time since the last reload("service timestamps log uptime")?
View 8 Replies
View Related
Sep 12, 2012
I have done this in the past but I cannot find it anywhere......how do you display the uptime of a CSM module in a 6500? The chassis has an uptime of over 2 years, but I believe the CSM module was power cycled at some point within that 2 years and I need to find out if we may be running in to the bug that occurs after 828days of uptime. We are running 4.2(6) on the CSM and 12.2(18)SXF1 IOS on the SUP.
View 3 Replies
View Related
Jan 26, 2012
My boss is asking me to write a batch file or use a utility to monitor the uptime of 16 different ISP accounts that we use across several stores. Most stores have several ISP accounts setup as failover, so they're not always active on our network but the ISP should still be up. He would like this to run from one of our servers. He is suggesting the 'gateway' for the ISP however I am not sure how to find this IP. The tracert utility returns IP addresses which are different than the gateway address in our router settings so I am wary to use those IPs.Which IPs would I ping to monitor the uptime and where would be the best place to find them?
View 2 Replies
View Related
May 30, 2011
I have a Cisco ASA 5500 as the main router with a DIR-655 as a wireless access point behind it. DHCP is turned off on the 655 as the ASA is providing DHCP. This worked great for about a year and now suddenly, without any changes, I'm having problems. The only thing that connects without a problem is a laptop, which shows up on the device list with an IP. Other devices have problems. iPhones connect, show an IP on the device itself, but when listed in the connected list on the 655 show no IP. The connection is super slow. An Airport Express will connect, but again, shows no IP in the connected list on the 655. Using the ethernet cable from the Airport Express, nothing can get an IP. I can live with the iPhone not connecting, but the Airport Express not connecting is a major problem. Any reason why this would just stop working one day?
View 2 Replies
View Related
Feb 27, 2013
Region : Italy
Model : TD-W8970
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : wind infostrada
TD-W8970 Wireless connection problems|
Region : Italy
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.2 v000c.0 Build 130201 Rel.54921n
ISP : Wind Infostrada
That's a wonderful router on the paper! Really it has some problems with the wireless connection and the dhcp server. After 2 days of i must forced to reset the router because it refuse any wireless connection while the internet browsing on the other pc connected via ethernet ARJ45 is very slow.To complete the scenario the router doesn't allow any acces to his console page ..so what's the problem?
I try to change any channel for the wireless without no positive result.I bought it on amazon but if this situation will continue without any solution from tp-link i will forced to send it back with a totally negative feedback on the product.
View 5 Replies
View Related
Dec 12, 2012
My set up is a 2wire router that connects to the internet, with an ethernet power plug connected to it. Over the other side of the house, I have the other ethernet power plug connected, with a Netgear router in access point mode.The main router is on 192.168.1.1, and the access point is on 192.168.1.3. The DCHP server is enabled on the main router with range 192.168.64 to 192.168.1.253. The access point has the DCHP server turned off. The routers have the same APN and security (WPA2-PSK).Also, the wireless channels don't overlap, channel 1 and 11.Now to my problem:The internet always works fine for a few days when the routers are turned on. But at some point between 1 to 3 days later, every computer can't obtain an IP address while connected to the access point. But all computers can connect to the main router (i.e. when closer to the main router than the access point), and then go near the access point and it keeps the connection. If I reboot the access point, then everything works again for a few days.
View 3 Replies
View Related
Aug 22, 2012
I'm probably overlooking something very simple but is there a command to show the uptime of a router interface in days,hours,minutes?
View 3 Replies
View Related
Oct 8, 2011
I had a virus. I think I got rid of it. Avast scans and boot time scans and Super Anti Spyware and TDSS killer report all clear. However, the network shield of Avast and the Internet don't work. Points to note: 1. In services, the DHCP and DNS cannot be started. I get the error 1075: service has been marked for deletion or one of it's dependancies are missing. (close to that)
I've checked the dependancies of both, and reinstated the ADF module in device manager after selecting the 'View Hidden' option.
View 3 Replies
View Related
Jun 22, 2012
I have been having this issue for the past one week where though i am able to connect to the internet through the wired lan without any problem when i connect it to my buffalo wzr - hp - ag300h router it disconnects within 5 minutes and on trying to check the internet connection DHCP server not detected error is shown. I have another edimax router and i tried to setup wireless with that router and have the same problem of disconnection after 5 minutes. [code]
View 14 Replies
View Related
Apr 5, 2013
Firmware 1.3 introduced a DHCP server.
It seems that I can add a pool for any subnet except the 192.168.1.1/24. I have successfully added a pool for 192.168.0.1/24, 172.16.16.1/24, etc. But when I use the same commands to add a 192.168.1.1/24 pool, I get:
sw(config)#ip dhcp pool network Device sw(config-dhcp)#address low 192.168.1.20 high 192.168.1.250 255.255.255.0 Illegal IP addresses range or subnet configuration Trying to configure a network pool on default IP interface
VLAN 1 IP was changed from default 192.168.1.254 to a static of 192.168.0.1.
View 2 Replies
View Related
May 8, 2013
i have this message "DHCP Timeout"on few cisco IP Phones . try to assign IP manually and it's working fine.. seems DHCP not giving IP's to those.. 6500 have configured as DHCP pool.
View 3 Replies
View Related
Nov 24, 2012
The WAG160N V1 you can change the dns primary default router for the connection "alice adsl 7 mega"? I would like to change it because in widows8, I keep giving every time the system event log, the error: "The computer was not assigned an address from the network (from the DHCP Server) for the Network Card with network address 0xF07D686CB987 . has encountered the following error: 0x79. Your computer will continue to make further attempts to obtain an address " I checked with the ping and the first two dns 85.37.17.15 does not work, while the second works 85.38.28.74. how to configure the DWA140N rev.B2 the property is currently configured as follows: IEEE802.11h = Disable Multimedia / Gaming Environment = Disable Country / region (2.4 GHz) = n. 0 (1-11) Country / region (5 GHz) = n. 0 (36-64, 149-165) Radio on / off = Active Selective Suspend = Disable Selective Suspend idle timeuot in senond = 5 Sensitivity roaming = Disable (options, max, min, average) Ad hoc support 802.11n = Disable
View 3 Replies
View Related
Apr 2, 2013
I have just setup a new WLC 2504 controller to manage a WiFi service that will span 6 geographic locations. The local networks at each location are on different subnets (all 192.168.x.x) and are linked up via IPSEC VPN links, and there is Active Directory spanning the sites, with DNS and DHCP servers running at each location.
I tested the WLC at our main office with a single AP, and it worked fine. The AP set itself up, and wireless devices connect with no probs. Great! Yesterday I headed out to one of our remote sites, and connected an AP to their network - and that seemed to work fine too. Within a few minutes I was able to see the WiFi network I'd setup, and my smartphone connected to it straight away (as I'd rpeviously connected at the main office), so I was pretty happy that all was working well.
This morning however I've had notification that wifi performance at the remote site isn't great. I've got someone to check their ip address, and I've found that their IP address and default gateway match the LAN at the main office where the WLC is based - NOT the LAN where the wireless client is. Obvioulsy this is not ideal!
(I guess I HAVE done something wrong!?). And how can I get wireless clients at remote sites to pick up an IP from the DHCP server at THEIR site?
View 3 Replies
View Related
Feb 7, 2013
I have Dell Inspiron 15 3520 laptop bought in December 2012 with Windows 8 Pro. It was working fine until two days ago. I am unable to obtain DHCP lease either through wireless or wired network. After troubleshooting, I found DHCP service is not running and try to restart but of no avail.I ran sfc /scannow and the results are OK.
View 2 Replies
View Related
Mar 28, 2011
I have a different problem, after i succesfully erased the spyware protection virus, i cant get in the internet anymore :( it always says "the connection was rest" on firefox and it wont load any site in IE either. what to do
View 1 Replies
View Related
Nov 11, 2011
I have Comcast cable internet and a wireless router. It has been working fine for months. Today, I can connect to the network but it says "No Internet connection." I have tried restarting the modem, router, and my computer. The strange thing is that the connection lights on the modem and router are lit as usual. Right now the router "internet" light is showing some kind of activity.
View 9 Replies
View Related
Mar 16, 2012
I have dir-655 that I have wired to an LG BD-570 bluray. I have a couple of issues that may all be related:
1. Netflix loads shows very slowly
2. When using PlayOn and trying to access script content (i.e. TvLinks, etc) I get a "network may be congested" error
3. I can't update the firmware on the LG when it calls for an update. I get a message that it cannot connect to the server.
It should be noted that when I skip the router and daisy chain through my computer's ethernet port 2 and enable "internet sharing" on ethernet port 1 (coming direct from my modem) none of these problems seem to exist.
View 3 Replies
View Related
Jul 7, 2012
When I try to log-in to my D-Link DIR-835 Router using IE9, I get an 'Authentication Failed' error. FireFox & Chrome work just fine. what I need to change or fix in IE9 so it will also log-in to my router?
View 13 Replies
View Related
