Cisco Switching/Routing :: Difference Between WS-X45-SUP7-E/2 And WS-X45-SUP7-E
Nov 7, 2011I see there are two different part numbers for Sup7-E. One has /2 at the end. So what's the difference between them?
View 2 Replies
ADVERTISEMENT
Cisco Switching/Routing :: Core 4506 / Difference Between Sup7 And Sup7L?
Aug 17, 2012I will go to buy a core 4506 but I'm comfusing about the Sup engines and the Fiber module. What is the different between the Sup7 and Sup7L?in the fiber module that I will go to buy is it contain the SFP inside or I have to buy the SFP ( WS-X4612-SFP-E ). also what is the different between the SFP and GBIC?
View 4 Replies View RelatedCisco Switching/Routing :: QOS On 4500E With Sup7-E?
Mar 25, 2012I was contacted by a customer today who is trying to configure QoS on a 4500E with Sup7-E. They are running:
cat4500e-universalk9.SPA.03.02.00.SG.150-2.SG.bin
And the 4500 is licensed for enterprise Services. I don't have access to the switch and am looking for configuration documentation and I am not finding the necessary configuration guides.
Cisco Switching/Routing :: What MIB ID For 4500 SUP7-E
Apr 22, 2013How to know 4500 SUP7-E's MIB ?Our customer use MS SCOM 2012 SP1 get the OID are 1.3.6.1.4.1.9.1.1286, but we use IOS MIB locator, we can not find this MIB id.
below are the IOS sh version information :
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.02.00.SG RELEASE SOFTWARE (fc4)
Technical Support: [URL]
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Tue 26-Apr-11 18:09 by prod_rel_team
[code]....
Cisco Switching/Routing :: VISIO Icon For WS-X45-SUP7-E And 4507R+E?
Mar 21, 2011I´m looking for the VISIO icon for WS-X45-SUP7-E and 4507R+E.
View 13 Replies View RelatedCisco Switching/Routing :: Enable All 4 10G Ports On WS-X45-Sup7-e Supervisor Module?
Dec 7, 2011How do I enable ports 3 and 4 on this supervisor module? I can only get ports 1 and 2 to work by default. I have a standby Supervisor in SSO mode. I'm running IOS 15.0.2SG
View 2 Replies View RelatedCisco Switching/Routing :: 4500 Internal Virtual Interface On SUP7
Jul 22, 2012We recently had a contractor deploy a 4500 catalyst switch with a WS-x45-SUP7-E. After installation and configurations, HP openview is detecting a "downed" interface on the 4500 chassis that is not in the configuration. I have attached an image with the interface circled. We assumed that it may be a configuration issue with openview, however after running diagnostics with a network analyzer, the same ip address for the down interface is still detected. Is this some sort of internal virtual interface on the SUP7?
View 4 Replies View RelatedCisco Switching/Routing :: Unable To Enable Netflow On Cat 4503-E (Sup7-E)
Dec 17, 2011I am working with a Catalyst 4503-E with a Sup7-E. I'm trying to enable Netflow, and I have read the following guides: Catalyst 4500 Series Switch SW Configuration Guide, Release IOS ...
I have also enabled Netflow in IOS 12.1/12.2 and figured the process was similar (It seems to be). CEF is enabled, and I have all the pre-reqs according to the document above, however, the flow commands don't exist, they simply say "command unrecognized". I have included my sh version below.
sh version (edited):
Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.01.01.SG RELEASE SOFTWARE (fc1)
[Code].....
Cisco Switching/Routing :: Possible To Configure QoS On 4500 Sup7 On Layer 3 Routed Port
Apr 26, 2013I want to know if is it possible to configure QoS on a 4500 Sup7 on a Layer 3 routed port like the following example (Similar to CBWFQ on IOS Router)?
View 3 Replies View RelatedCisco Switching/Routing :: Interface Numbering Plan On CAT4500E With SUP7-E Or SUP7L-E
Feb 1, 2013We are planning for the first installation of 4500 switches containing these supervisor modules. I'm trying to determine the interface numbering convention for ports on the supervisors. Our existing 4500E all have SUP6 modules with twin-gig converters - so I am familiar with the numbering conventions used on those supervisors. How does this change with the software based selection command "hw-module uplink select" used in SUP7?
View 2 Replies View RelatedCisco Switching/Routing :: Cat4500 Sup7 How To Limit Rendezvous Points Connecting To Bootstrap Routers
May 21, 2013In testlab we use pim-sm with bootstrap router on sup7 with IOS-XE 03.04.00.SG. Any possibility to prevent non authorized rp from connecting to the candidate bootstrap routers? We found several security recommendations concerning limiting registering of sources at the rp, rate-limits etc, but no possibility to control rp connecting to the bsr.
View 4 Replies View RelatedCisco Switching/Routing :: LLDP-MED TLV Commands - Cat45010+E Sup7 And Polycom CX600 Lync Phones
Oct 15, 2012I'm trying to configure LLDP-MED between a Cat45010+E Sup7 (IOS 15.1) and Polycom CX600 Lync phones. I have created and applied the correct network policy for the interfaces.
From these sites, I need to send all the correct TLVs or the phones won't respond: {URL}.
When a scour the config of the switch, I can't find any related configuration commands relating to the specific LLDP-MED TLV components which are enabled/disabled. Where are they hiding? I would like to confirm which TLVs are being sent by my switch and if they are matched to the phone. I can always use the DHCP method, put this is not preferred.
Cisco :: WS-X45-SUP7-E OID For Memory And CPU Load
Jan 30, 2012To have a management tool polling by SNMP some information like CPU load and memory load, I tried to find out the OID.The supervisory card is a WS-X45-SUP7-E with a dual core CPU and 2G of memory.IOS is IOS-XE 3.2.2
Does any OID or nagios template already for the new card ? The Nagios template I use for others switches do not get the good field
Cisco :: CAT4500e / WS-X45-SUP7-E - Getting Started With Flexible Netflow
Oct 18, 2012i want to activate flexible netflow on my WS-X45-SUP7-E with IOS cat4500e-universalk9.SPA.03.02.00.SG.150-2.SG. I've started with a simple configuration like this:
Configuring a Flow Monitor for IPv4/IPv6 Traffic Using the Flexible NetFlow
“NetFlow IPv4 Original Input” Predefined Record
SUMMARY STEPS
Cisco Switching/Routing :: Difference Between FTE-10G And SFP-10G-SR
Sep 29, 2010explain me the difference between FTE-10G and SFP-10G-SR, being focus on an architecture Nexus.
View 5 Replies View RelatedCisco Switching/Routing :: Difference Between 851 And 881?
Nov 6, 2012I found a 851 router and tried to build a ezvpn tunnel. The issue I am running into now is that a 851 router can only have one vlan in its database. I need two vlans to go into the EZvpn tunnel with using another device. So can you tell me if a 881 router can have more than one vlan created on the router and can those vlans be assigned to a interface and can I create a svi for each of those vlans as well.
View 2 Replies View RelatedCisco Switching/Routing :: Difference Between SFP-10G-SR Or SFP-10G-LR?
Apr 10, 2012what the difference betwen these two cards? SFP-10G-SR or SFP-10G-LR
View 2 Replies View RelatedCisco Switching/Routing :: What The Difference Between L2 Vs L3 VLAN
Dec 9, 2011what the difference between L2 Vs L3 VLAN? in know in which situation i use L2 Vlans but i don't know that about L3 Vlan.
View 2 Replies View RelatedCisco Switching/Routing :: Difference Between 6500 SXJ And SXI?
Nov 25, 2011i would like to check out what's the difference between the naming convnetion for the 6500 IOS.
I read the data sheet to support my POC deployment to support NCS v.1 the 6500 IOS need to upgrade to 12.2 (33) SXI
Is it able to work if i using SXJ instead of SXI, with the same IOS version 12.2 (33)?
Cisco Switching/Routing :: Difference Between 871W / 851 And FTP
Oct 10, 2012I've acquired an 871W, because I'd like to use wireless, to replace my 851. I Ft Pd the 851's configuration to my FTP server and then Ft Pd this to the 871W. Save for the fact that this has a radio interface (currently shutdown), everything works save for FTP from the outside. I can not even telnet to port 21 of any of the internal FT servers. I can telnet to any other port (ssg, smtp, HTTP, https, etc.) but FTP will not pass. What's the difference?
View 12 Replies View RelatedCisco Switching/Routing :: C3560E Difference Between Two Temperature
Mar 17, 2013What is the difference between Operating temperatue & storage temperature of switch C3560E ?
View 2 Replies View RelatedCisco Switching/Routing :: Difference Between WS-X6148A-GE-TX And WS-X6148-GE-TX
Jun 6, 2012What is the different between WS-X6148A-GE-TX and WS-X6148-GE-TX ? Currently, I can not use MTU command on X6148 but can on X6148A.This two cards installed in cat6509E.
View 2 Replies View RelatedCisco Switching/Routing :: Difference Between 3925 / 3925E And 3945
Jan 30, 2013terms of Performance for 3925, 3925E and 3945.
didn't see much different between 3925 and 3925E except an additional port.
Cisco Switching/Routing :: Difference Between Catalyst 3750e 48 And SF300-48p?
Apr 11, 2012what is difference between Cisco catalyst 3750e 48 and SF300-48p.
View 3 Replies View RelatedCisco Switching/Routing :: Difference Between Stack 3750G And 3750X?
Jul 15, 2012I have a cisco WS-C3750G-24TS with IOS flash :/ c3750-mz.122-ipservicesk9-25.SEB4.bin "
I purchased a new Cisco WS-C3750X-24 with the IOS flash :/ c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin. ( NEW )
When i configured a stack between the two 3750, the new switch restarted due the version mismatch (different IOS´s);
We have two versions:
WS-C3750G-24TS-ipservicesk9 flash :/ c3750-mz.122-25.SEB4.bin "
VS
WS-C3750X-24 flash :/ c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin.
Is that possible to configure a stack between then?
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Tenho um cisco WS-C3750G-24TS com o IOS flash:/c3750-ipservicesk9-mz.1
22-25.SEB4.bin"
Adquiri um novo cisco WS-C3750X-24 com o IOS flash:/c3750e-universalk9-mz.150-1.SE/c3750e-universalk9-mz.150-1.SE.bin.
[code]...
Cisco Switching/Routing :: Difference Between IP Base And Universal For 3750X Switches?
Apr 9, 2013What is the difference between IP Base and Universal for 3750X switches?
View 2 Replies View RelatedCisco Switching/Routing :: WS-C2960-48TC-S / Difference Between Transceivers (GLC-SX-MM And MGBSX1)
Jan 29, 2013Switch A is: WS-C2960-48TC-S
Switch B is: SG 300-10MP
Neither switch supports a similiar transceiver module. We are looking at transceiver GLC-SX-MM for Switch A, and MGBSX1 for Switch B all the Layer-1 information (SX / wavelength, Multi Mode, etc.) I am able to find out about the two transceivers seems to match, so would there be any issue by having these 2 "different" transceivers at either end?
Cisco Switching/Routing :: Difference Between Catalyst 3750-X And 4948-10GE?
Jun 6, 2011I want to choose a pair of switches for our data center.What I need: 48 x 1GE access ports, 2 x 10GE uplink ports.Nice feature of 3750-X is stacking. So what features has 4948-10GE? Why I should prefer that switch?
View 11 Replies View RelatedCisco Switching/Routing :: Difference Between Auto Qos And Voip Trust With C2960S
Aug 1, 2012Are there any differences between the autoqos commands on a WS-C2960S switches (or in any other series)? Follow the commands:
- auto qos trust
- auto qos voip trust
I was checking the documentation on this link:
URL
And couldn't find any great difference between the two commands, as far as I could see they'll set the Ingress and Egress queues the same way.
Are there any differences between those two commands (auto qos trust and auto qos voip trust)? If so, when should I use one and the other?
Cisco Switching/Routing :: 2960 - Difference Between SDM Prefer Access And Default
Aug 22, 2012What is the difference between sdm prefer access & sdm prefer default & sdm prefer lanbase-routing? When do we use these options?
View 2 Replies View RelatedCisco Switching/Routing :: 6513 / Difference Between Supervisor Engine 720 Active And Hot Status?
Apr 19, 2013In my 6513 switch chassis we have two Supervisor Engines 720 one is marked Active other as Hot. what is the diffrence in their mode as by name I suppose that Active one is currently in use and Hot one is in standby mode.They are showing in this manner.
Module Ports Card Type
7 2 Supervisor Engine 720 (Active)
8 2 Supervisor Engine 720 (Hot)
Cisco Switching/Routing :: Difference Between Nexus And Usual Catalyst 3750 Switches
May 26, 2013what is the difference between Cisco Nexus switches and the usual catalyst 3750 switches.I do understand the operating system in both these are different.
When will we suggest using Cisco nexus instead of usual Cisco switches? Also what interface does Cisco nexus like 5548 come with , is it both copper and fiber?
Cisco Switching/Routing :: C3750X Stack / Difference Between LanBase And IPBase For ISCSI?
Dec 26, 2011Cisco let us try a CISCO C3750X- 24T-S Stack (2 switches) ->> IpBase Sofware licence We've 2 Hyper-v 2008 R2 and one SAN Netapp FAS2040 connected via Iscsi.All was working well with this stacks.Hyper-V see Nas Iscsi interface without problem. Even with basic stack config (no Vlan, ect...).Then, after this test period, we bought a C3750X-24T-L stack (2 switches) to replace the stack lent by Cisco.This one is LanBase Software.
With this stack, hyper-v work very bad ! We've got a lot of Iscsi error in the eventvwr.I can't access luns.So, is there a difference between LanBase and IpBase for a iscsi use ?I put the 24T-S config on the 24T-L switch without pb. So config is the same on both stacks...Also i've got a "TestPortAsicLoopback" = "Failed" on the new stack...I've tried with other stack cables. Not better.
