Cisco VPN :: 5510 Is Not UP Although Internet Is Accessible
Mar 18, 2012
I setup a site to site vpn between location A and location B.The setup is working and both location can see each other. Now the problem is last weekend the vpn is not UP although the Internet is accesibble. The solution is i power off - on the ASA 5510 and the vpn connection is UP again. This already occurs 2 times. The 1st times is 4 month back. The 1st time i thought is nothing, but the 2nd time, I really need to know what wrong?I attach the configuration of the ASA 5510 at location A that i reboot.
View 2 Replies
ADVERTISEMENT
Apr 7, 2011
Cisco ASA 5510 with static routes. I created a new internal vlan and added the correct route to the ASA. Internally the vlan is fully accessible but when I connect to the VPN I cannot communicate with systems on it.
The dynamic access policy and associated ACL are fine. A system associated with this policy but not on the new vlan is accessible thru this policy.
View 4 Replies
View Related
Sep 24, 2012
I have a similar problem, I'm able to connect via VPN client and ping only one host on the remote lan and nothing else. I'm using both split-tunnel and non-split-tunnel, but none has worked. My main objective is to make the remote user connect to office lan (remote lan for him) and office Internet connection.
View 6 Replies
View Related
Aug 15, 2012
I have a Windows 7 machine that is wired to the router. I have Windows XP computer that is wireless in another room. Signal is showing 80% and internet is accessible and fast from both systems; but, I cannot access either computer from the other computer. I got the IP addresses of each machine and I cannot ping from either direction. Firewalls are turned off on both systems.When I type in \server, I get an error that say I should check my spelling or use the windows Search; but, that doesn't work.
View 5 Replies
View Related
Jun 28, 2011
I have a Motorola Affix and am using the app printershare to print from my phone to a network printer at home.. it works great.. but I want to know if there is a way to make the printer accesable from the internet so I can print from pt phone when im not home and connected to the network...accessible
View 2 Replies
View Related
Apr 19, 2012
My pc (windows7) will say its connected.. It even says internet access.. But when I click in the Internet?THE WEB PAGE IS NOT AVAILABLE. It says the DNS lookup failed. But the thing is... all my friends bring their laptops over (Mac & Pc) and try work fine. Even my phone catches the wifi perfectly in my house. I started to think maybe it was the laptop but the laptop word great on wifi at my job, my friends house, and pretty much anywhere with wifi but my house. I have wifi through bright house and they came to my house one day but they ended up not doing anything because they can only make sure there device (router) works perfectly. Ok.. So I took the laptop to best buy's geek squad and the guy "reseted my network card" & told me it should e fine when I got home.. Nope. Didn't work. I have spent hours looking trough the Internet trying things that people recommended I do. (start, run, cmd) I've tried it all. It just won't work. I really need this laptop to work at home because I do a lot of work from the pc. I hope somebody on here could point me into the right direction before I give up & toss this laptop in the shed and be forced to purchase a new one.
View 8 Replies
View Related
Jun 8, 2012
Would it be possible to make a printer accessible from internet? Need to print a lot of batch printing from my cloud application , in that case can we direct this print job to a specific printer over internet ?
View 1 Replies
View Related
Apr 16, 2013
I have a router asr1002 and I need that my loopback interface will be accessible from internet ISP adderss space I have
46.xx.x.64 255.255.255.192
interface TenGigabitEthernet0/2/0.301
description -=ISP=-
encapsulation dot1Q 301
ip address 46.xx.x.66 255.255.255.248
[code]...
packets transmitted 9received 0packet loss 100 %time 8063 ms
View 1 Replies
View Related
Nov 6, 2012
I have a DVR system. Which is configure in DMZ on my firewall. DVR internal IP is 192.168.2.13 and external IP is 27.34.xxx.xx. when I am able to access DVR by using internal IP and it works fine while accessing from the internet it not work proper. Though it prompt for username and password also. After enter the login credential its getting blank. I am able to telnet External IP from internet on port 80.
View 1 Replies
View Related
Feb 28, 2012
I purchased an IP Cam for my girl friend to monitor her dog, she lives in an apartment complex that provides internet. I have been able to get the camera setup at my house to be accessed through the internet. I have a cable modem and a router, setup a dyndns account, port forwarded my router and boom it worked. Went to my gf's apartment and I didn't think of it at first until I was frustrated, but realized the apartment complex probably has a router of its own. I can access the cam on her LAN but not through the internet.
View 3 Replies
View Related
Mar 4, 2011
Internet access is working fine, however I cannot get my computers to work on the network therefore cant share any files or play any network games. The router is set up as DHCP server therefore IPs are automatically assigned, this is setup on the PCs and the router. The work group is also set. Exactly same settings basically as my old router which worked fine but wont on this one! I have 3 wired PCs and a wireless laptop. 2 PCs are windows XP the other is Windows 7 and the laptop is windows 7. The wireless win7 laptop will recognize my win7 wired PC and vice versa and can share everything without problems, but they wont have anything to do with the wired winxp PCs, on top of that the 2 winxp wont recognize each other either so don't think its anything platform specific. I have also tried setting up static IPs for each computer - still no joy.This is a brand new D-Link DIR-655 Rev B1 firmware 2.00
View 3 Replies
View Related
May 24, 2010
I`ve had a problem with my WAG320N for some time now.I`ve add a 1,5Tb hard drive to the usb and I can access it at LAN.Now I want to take it a bit further and be able access it from the outside.
View 9 Replies
View Related
Aug 18, 2012
I just got my dad's old notebook (VAIO VPC F223FB) which is better than my older one. So, I did a backup and then managed to clean install a Windows 7 Professional x64.At first I had a problem with the drivers, because the internet wasn't connecting and the USB ports weren't detecting my External Drive. So, I tested other USB port and got it. Installed the drivers and I could connect to the wireless network. But it doesn't detect the ethernet cable! And I want it detecting because then it's faster. I already tried downloading the Ethernet Controller driver. At first, I downloaded through Sony's support site but it didn't recognize the driver. Now, it recognizes but still doesn't connect it. And when I tried Solving Connection Problems, it said the network gateway was accessible but Windows can't receive Internet network traffic.
View 5 Replies
View Related
Jan 25, 2012
I have IIS running in a machine inside my network and I would like to make is visible to the world wide web.To do that, I created a website in the port 8787, which is accessible when the user types 192.168.0.126:8787 in the browser. Of course it works only when the user is inside my network.(IIS running over windows server 2008 OS)Now I want to make it visible to the WWW, so I created a rule to make a port forwarding to it:I went to: Advanced > Virtual Servers and created a rule with the given information:
enabled
Name: website
private ip: 192.168.0.126
protocol: both
private port: 8787
public port: 8787
Schedule: always
This rule created automatically a firewall rule
Enabled
Alow
Source: WAN *
Destination: LAN 192.168.0.126 Protocol: * Port range:8787
always
Unfortunately it isn't enough, if I type myPublicIp:8787 I can't access the website because I either get "connection reset" error or a timeout.I pluged my computer directly in my modem and it worked perfectly.To make a test, I tried to enable the router remote administration on the port 10001. It didn't work.ps: my wireless router is a dlink di-524, I am writing this in this forum because I couldn't find the one related to my router...
View 1 Replies
View Related
Mar 9, 2012
Ok so one site i used to use regularly has for the last few month been either incredibly slow or totally inaccessible. Its a perfectly sedate site just a social forum, its this one. www.pandemoniumcarnival.com/ which is accessible to all my friends but seemingly not to me...So far i have changed DNS (to open DNS and Google, thinking my isp had blocked it for some reason)Tried Firefox (my usual browser) chrome, IE ...flushed all the settings etc in each no cookies etc. Tried "In Private Browsing" etcOddly i can get to the site if i use a site called "Hide my ***" a proxy server thing. But even then its not fully functioning due i think to the proxy setting (?)
View 8 Replies
View Related
Jul 28, 2010
I recently ( three days ago ) purchased a SRP 527w and have been using it in a mixed Mac/Windows network. The setup is currently primarily using defaults apart from enabling logging. While I was still able to access the internet with some applications, accessing web content appears to have blocked after approximately 48 hours uptime.
No web pages using port 80 were available and that included the router web interface. The router would respond to ping only.
On a different note. I have to say that I find it very strange that the supplied documentation doesn't advise setting up the router using the admin login. It was only after reading one of the comments on this site that I was alerted to this security problem. I also find it rather annoying that I appear to have to purchase additional support merely to be able to download firmware updates which are designed to give the device improved functionality.
View 51 Replies
View Related
Feb 22, 2011
i found WAN Miniport (IP) - in my windows xp and at the same time my Lan systems are not accessible.
View 1 Replies
View Related
Mar 19, 2011
I'm working on a small network (1 server, 6 workstations, stand-alone, not connected to the main Company Network) "reinstalling" a Workstation. Re-imaging from semi-generic Norton Ghost image (4 of the 6 Workstations run the same programs with different addresses). I then had to reset the IP, the Computer Name, and then the Domain (I did it in that order).
I'm using Windows Server 2003 as the domain controller, and the Workstation is Xp Pro Sp 2.
The Workstation is using the same IP, Name, User as before, and they were working with the server previously (a program had corrupted prompting the reinstall).
The problem is that if I open windows explorer and type in the Workstations IP (\000.00.0.1) I get access to the computer. But if I go there and type in the Workstations Name (\Computer01) I get a "you may not have permission to use this network resource" error.
If I go to the work station, and try the same thing except with the Server's IP (\000.00.0.100) and Name (\Server01) I get access.
This Workstation controls an I/O device that is used by a program running on the server (most of the time, not while I'm doing the install of course) and the program uses the Workstation's Computer Name to access it.
As far as I can tell all the settings on this Workstation match the 3 that are running the same programs, but I could have missed something.
I'm a bit stumped by this, I don't normally deal with the Server side of the computers. I usually just set up the workstations to whatever Name/IP the Net-admins give me. But my bosses put me in charge of this little network, mainly because the Net-admins din't want to deal with it.
View 2 Replies
View Related
Jul 8, 2012
I was trying to connect my computers on a home network so that I can access either one via the other.When I try however I get the message:
"***-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
long failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a police restriction has been enforced.
That is the message from computer 1 to computer 2.
Computer 2 gives me the message:
Windows cannot access \***-PC
Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose.
View 2 Replies
View Related
Aug 31, 2012
I can not access shared windows 7 c drive in windows xp. how can i view these system
View 3 Replies
View Related
Jan 31, 2013
I have a linksys router and i'm having quite a big issue. it's been since 2010 that I bought it and have no problems up until recently. I was playing/ going through all the security settings just to what all there was to secure my router. I noticed an ip setting and I 95% sure I did something which changed it; and now i am unable to access my router settings. Whenever I type the old ip address (192.168.1.1 or any of the few other ip addresses) it gives error page and says this page is non existent or it gives me a link to click on with the failed ip address to do a google search. My question is, is there any way that I can reset the router (like a system restore on a computer),
View 2 Replies
View Related
Mar 23, 2013
I have nated my 172.81.15.0 255.255.255.0 into my internal server 10.1.10.164 , i can ping the out side server but the internal server is not accessible from out side static (Database-Servers,interface-sms) 172.81.15.2 10.1.10.164 netmask 255.255.255.255icmp permit 172.81.15.0 255.255.255.0 interface-smsroute zemen-sms 172.81.15.0 255.255.255.0 10.131.199.201 1access-list Database-Servers-in extended permit tcp host 10.1.10.164 host 10.185.62.144 eq 9090access-list Database-Servers-in extended permit tcp host 10.1.10.164 host 10.185.62.144 eq wwwicmp permit host 10.185.62.144 interface-smsi can ping the out side server 10.185.62.144 with out a problem . from the server 10.185.62.144 i can ping untill 172.81.15.2 and it will not ping the natted server 10.1.10.164. as u seen the accesslist ping is permitted.
View 1 Replies
View Related
Jul 14, 2009
I am having some problems with WRVS4400N v2.We use it just for wired network (wireless is not in use, but it is configured). As a WAN we use PPPoE. Most machines do not use DHCP.After a while (few hours to few days after power up) the router freezes and it is not accessible. I cannot ping it or access to the admin page.I have the latest firmware version (V1.00.09-ETSI)I also called service and they suggested to reset it to factory settings and reconfigure it.
View 3 Replies
View Related
Mar 17, 2012
Cisco ASA5505..Made a VPN connection (SSL or ANYconnect) with a domain notebook. After that via RDP (connect with domain user) to one of the PC's in the domain. Until now everything is ok.The mapped drives are there but I do not have access to them. Normaly when I logged in into the network no problem but only with VPN connection.I have to login to get access but when I do that get message unknown user.
View 1 Replies
View Related
Oct 7, 2012
In my client office, We have replaced small business router cisco RV042 with Cisco ISR router 2911, in that router we have configured NAT to allow internal user to access internet and port forwarding for outside user to access web servers and other application that are hosted internally.
we are not able to access [URL] (name changed) from internally and one of the application that are runnning on port no. 8280., and same is working properly from outside the network.other application that running on 8287 is accessible form internally.
We are accessing with ip address http://192.168.1.51:8280. and [URL] not working from inside.
But all works fine with old cisco RV042.
View 9 Replies
View Related
Dec 25, 2011
i have ASA 5510 with firmware version 8.4.2 and ASDM firmware 6.4.5 , it is a new system and there is no configuration other than inside network and HTTP server enable , allow my ip address to access http server.i am able to ping the firewall but no access throguh ASDM
[code]....
View 5 Replies
View Related
Apr 28, 2011
I have made a Nat Rule to access local IP in outer world with external IP on asa 5505 . Before creating nat rule external IP was directly given to server but after that I put server behind ASA. But now external IP is not accessible externally.
View 4 Replies
View Related
Mar 26, 2011
I have a fairly simple wireless home network. My main desktop machine is running XP Pro, and our family laptop is running XP Home. The laptop shares the My Documents folder for 2 of the 3 profiles. One of them works as it should. It is visible and accessible on the main desktop machine, but the other share is visible but NOT accessible. I get the following error message when I try to explore it from the main desktop machine:
<the share name> is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Access is denied.
I'm not sure when this started, but remember that the other folder being shared is working just fine. I've double and triple checked the settings, share names, and basically anything I could possibly mistype. I've restarted both PCs, and refreshed the network explorer via both the file explorer and My Computer dialog. The My Computer dialog refresh the shares for some reason that the explorer wouldn't, but I'm still denied access to that one share on the laptop.
View 2 Replies
View Related
Jun 29, 2012
Cannot Ping System but system can ping everyone on the network accessible
View 2 Replies
View Related
Jan 19, 2011
I have a router-based home network in which the desktop running XP media center is connected by cable to the router. There are 2 wireless laptops, one running XP home and the other Windows 7.The laptops can talk to each other, and the desktop can talk to the laptops.But I cannot access the desktop from the laptops. I can see the (shared) folders, but when I click on one I get the message: "You might not have permission to use this network resource..Not enough server storage is available to process this command." One solution suggested in several places is to change the IRPStackSize to 15. However, if I start the desktop in safe mode with networking, I can access the files.I can also access the machine using remote desktop.One extra frustration is that this is a problem that has happened relatively recently. It used to work OK.
View 8 Replies
View Related
May 21, 2011
I have a question that�s been bugging me and that internet searches didn�t quite explain and that is how do I make a resource available publicly e.g. web serverAll I hear so far is register a domain name but that doesn�t quite answer the full question. Id like to know exactly what happens when a user types in the url of my web site and how their traffic gets to me. Is it.. get a static ip from my isp then provide this to the domain name registrar and that it now every one can access my site?? Seems to simple.
View 1 Replies
View Related
Jan 20, 2012
I created a share on our server for a few AD users and set those users up in a group I set that group to have the permissions to read/write this share. When one of those users tries to connect to the share from a PC, he is denied permissions, but when the same user connects to the share from a Mac, the file permissions work as they are set.I checked effective permissions for each user in the group, and they have the access they are supposed to. I've tried re-creating the share, recreating the group, and comparing the permissions to another share that is set up the same way (but working properly).
View 2 Replies
View Related
Dec 5, 2012
i have shared 4 network drive in my client computer but sometime when we leave computer on for a couple of hours and then try to access the drives then it shows the message "network drive is not available" the only way to access the drive is to restart computer.
View 1 Replies
View Related
