Cisco VPN :: 891 Nat IP Can't Ping VPN Configuration Professional
Sep 26, 2012I configured a VPN site to site through an Cisco 891 and Lynksys RV042: Followed this steps: [code]The VPN works only for computers without NAT. [code]
View 4 Replies
ADVERTISEMENT
Cisco :: 881 - ICMP Using Configuration Professional?
Sep 5, 2012I am trying to set up the router (881) using Cisco Configuration Professional, to allow ping reply's..I can not for the life of me figure it out.
View 4 Replies View RelatedCisco Firewall :: Using Configuration Professional For 891 Router?
Aug 5, 2012For the moment we have a router Lynksys RV042 , and we want to change it with an Router Cisco 891 .I have configured our new router Cisco 891 using Cisco configuration Professional because I am not an cisco expert:
I have configured : DHCP, DNS, NAT, Firewall (I have selected : Advanced , Low Security) . I have tested the new router and :
- Internet is working
- We can send Emails, Receive Emails from Outlook
- Our Web sites cand be accessed from the outside .
- File Share is working
We have 2 problems
1. Can't Access from inside the network : our public ips configured in the NAT : **.***.**.150 .
When we try : ping **.***.**.150 , we receive : Request Timed Out .When we try ping 192.168.1.2 , everything it's ok.When we try ping from outside of the network , everything it's ok.
PS : I want to mention that : if I put back the old router I can access our public IPs.
2. When I send Emails to yahoo and access View Full Header I receive : dkim=temperror (key retrieval failed)
------------------------------------------------------------------
Received-SPF: pass (domain of ********.com
designates **.***.**.150 as permitted sender)
Authentication-Results: mta1036.mail.ac4.yahoo.com from=********.com; domainkeys=pass (ok); from=********.com; dkim=temperror (key retrieval failed)
Received: from 127.0.0.1 (EHLO mail.********.com ) (**.***.**.150)
[code]....
I think our Email Server (Smarter Email) is using the ip Adress: 127.0.0.1 (Please look in the attachement) and this ip is restricted from the firewall (ccp in zone to out zone : Drop : 127.0.0.0/0.255.255.255) (generated by Advanced firewall > Low Security) .How can I set that to work ? Can I delete that row ?
Route Add Command In Windows 7 Professional?
Aug 20, 2012Each time I try to add a new route(route add 172.24.0.0 mask 255.255.0.0 172.21.0.4). I get the following error message: The requested operation requires elevation.
View 1 Replies View RelatedCisco VPN :: 5510 - Client 5.0.07.0410 Not Working On Windows 7 Professional
Sep 7, 2011I'm having a wierd issue with the VPN client installed on Windows. Eventhough it connects and receive and IP address, I'm not able to access any of the servers on the remote network.
Is there any special configuration need it for it to work on Windows 7 proffesional?
The client works perfect with windows XP, we have a ASA 5510 Version 8.2(2) is in routed Mode
Dell :: External Wireless 1450 On Windows XP Professional X64
Nov 13, 2005Is there a driver available yet for the External Dell Wireless card (model number D1450U) yet on Microsoft Windows XP Professional x64? I guess the better question is if there is a 64bit driver available for the external card yet?
View 5 Replies View RelatedLinksys Wireless Adapters :: CISCO AE1000 Install On Windows 7 Professional?
Aug 11, 2011I have tried installing this device on Windows 7 64bit machine. The install seems to go fine and the device works at 2.4G.
But I purchased this unit to be able to test a clients 5GHz system. There does not seem to be any place to switch from 2.4G to 5.0G.
No Ip Address Using Netgear Wireless Adapter On Windows 2000 Professional?
Jan 3, 2012This is an older desktop, Been utilizing the net gear to get on the Internet for months and it was working fine,shows it is connected to ssid but ip shows up as 0.0.0.0 I have other home computers hooked up and work g so I located there ip address, can I input it myself ? If so how?
View 2 Replies View RelatedWindows XP Professional - Cannot Connect Work Computer To Home Internet
Jun 15, 2011I was recently given a computer from my workplace. I took this computer home, and put it in the place of my old one. The internet connection on my old computer has always been fine; all cables are connected correctly. However, this computer from work will not connect to the internet. The icon in the bottom right corner of the screen states that I am connected, but the internet browser claims that it is unable to display web pages. May the cause of this be related to any unique computer settings that a workplace may have on a computer in their network? Other computers have no problem connecting to the internet through the same, wired connection. The OS is Windows XP Professional.
View 2 Replies View RelatedLinksys Wireless Adapters :: WUSB54GC Windows XP Professional Compatibility?
May 26, 2009So I bought the WUSB54GC wireless adapter today. My computer's OS is Windows XP Professional. Whenever I load the disk and click "Start Setup" a window pops up that says "This version of Windows in not supported."
View 9 Replies View RelatedCisco VPN :: Dell Latitude E6410 / VPN Client On Windows 7 Professional X64 / Connection Fails
Apr 18, 2011we are using Cisco VPN client to access our corporate network.I have 5 new notebooks Dell Latitude E6410 OS Windows 7 Professional x64, with identical hardware configuration.I downloaded Cisco VPN Client 5.0.07.440 (64 bit) and installed it on all notebooks. It works fine on 3 notebooks, while on 2 notebooks the VPN connection fails with error:
Secure VPN collection terminated locally by the client.
Reason 403: Unable to contact the security gateway
We use a smartcard for VPN access (etoken from Aladdin)
Here an extract from Cisco log:
Cisco Systems VPN Client Version 5.0.07.0440Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 6.1.7600...Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600026 Attempting to find a Certificate using Serial Hash....Sev=Info/6 CERT/0x63600027 Found a Certificate using Serial Hash....Sev=Info/4 CERT/0x63600015 Cert (cn=<omissis>,ou=Remote,ou=Users,ou=<omissis>,dc=it,dc=<omissis>,dc=local) verification succeeded....Sev=Info/4 CM/0x63100002 Begin connection process...Sev=Info/4 CM/0x63100004 Establish secure connection...Sev=Info/4
[code]......
It seems the problem is in the certificate, but I verified and Cisco client says it's ok. It's also the only valid certificate in MMC->Certificates->Personal.Furthermore, also using other smartcard (etokens) of other users it doesn't work.
Windows XP Professional 32bit - Forward Port 88 On Linksys WRT54G Version 6?
Mar 1, 2011I am trying to forward a port so i can connect to my computer because i want to stream a radio station from computer to my phone.I'm trying to forward port 88 on my Linksys WRT54G Version 6.I tried that but Boardwave audio streaming server still says it's not open!Here are some pictures: I'm using Windows XP Professional 32-Bit
Eset AntiVirus
and using Windows firewall
Linksys Wireless Adapters :: DP45SG Can't Install Drivers For Windows XP Both 32-64 Professional
Mar 19, 2011I cant install drivers for Windovs XP both 32-64 Professional. Original CD tells me for x64 OS is not supported, also, when trying to install only drivers it just can't find it. For x32 same problem - can't install drivers. I've got Intel DP45SG.
View 5 Replies View RelatedCisco Wireless :: WAP4410N / Cannot Access Configuration Utility Or Ping Default IP Address
Sep 29, 2010We have 3 WAP4410N on our network. Our laptops pick them up but I cannot access the configuration Utility or ping the default IP address. If their IP addresses have been changed how do I find out what their current IP adds are? We currently use static IP addressing for our network.
View 2 Replies View RelatedCisco Switching/Routing :: 3560G Can Ping Devices In Enterprise LAN But Cannot Ping Interface
Mar 31, 2012I have a new 3560G to set up a small network for a remote site. I configured the vlan and an SVI as the gateway. The switch is also the DHCP server for the LAN. I configured Gi0/2 as L3 port, connecting to the nearest neighbor. My network runs EIGRP so i advertised the routes into the EIGRP process. The switch forms EIGRP neighbors and learns all routes in the enterprise network. The problems I'm having now are: 1. The switch learns all routes in my enterprise LAN and can ping devices in the enterprise LAN, but I can’t ping any interface on the switch from the enterprise LAN. 2.
View 5 Replies View RelatedCisco Switching/Routing :: Can Ping From R1 To R3 SVI4 Gateway But Cannot Ping Host
Dec 12, 2011I set this up and I can ping all the gateways but never the hosts. I was hoping I could make these links between 6500's a mix of L2 and L3. Check it out. They are connected in a linear fashion R1--->R2--->R3. I can ping from R1 to R3's SVI4 gateway but I can never ping a host on that SVI4. I was hoping that I could use the port-channels between 6500's as routed links or as trunk links depending on the type of traffic....thought it would ease the migration. I suppose I could always get rid of the port-channels and just make separate L2 and L3 links between the 6500's.
View 3 Replies View RelatedCisco Switching/Routing :: 4.2.2 Unable To Ping 1 Internet Site From Edge Router Able To Ping
Jan 18, 2013From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View RelatedRouters / Switches :: Windows Ping Success But Mac Ping Fails
Aug 15, 2011When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
Can Ping From Server But Can't Ping To Work Stations
Jan 26, 2012I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies View RelatedCan't Ping XBox 360 But Can Ping Other Devices
Mar 1, 2013I had both a Westell 7500 and a Linksys Router working fine and had my 360 setup as an extender for Windows Media Center so I could stream TV, Music, Movies, etc from my desktop to the 360. Then I switched my modem/router out with a Zyxel PH5001Z
So now today I noticed that I can no longer find my desktop through the XBox. I have adjusted my firewall settings on the modem itself, even completely disabling it. UPnP is enabled for the 360 and the device is showing under my device table. At first I wasn't able to ping any network devices but after creating an ICMPv4 Firewall rule it worked fine. I've confirmed the XBox IP Address through Network Map, the Device Table on the modem and through Network Settings on the XBox. I've diabled my modem firewall as well as Windows Firewall, completely and I still can't ping my XBox or set it up as an Extender.
I have the XBox connected wirelessly using WPA2-Personal and it's operating in 802.11g/n mode.
Cisco Switching/Routing :: 6509 Convert CatOS Configuration To Native IOS Configuration
Jul 17, 2012I am position to migrate from CatOS 6509 switch to native IOS 6509 switch. long time ago, there was some site to convert automatically based on copy and paste onto the tool, but i can not find.
Does anybody know how to convert CatOS configuration to Native IOS configuration ? It is not IOS change, but it is configuration convert.
Cisco VPN :: ASA5510 Can't Ping VPN Clients But Clients Can Ping
Feb 29, 2012I have a strange issue on my ASA 5510 (8.4). I can't ping or connect to the VPN clients but the VPN clients can ping/connect to any inside resources. I have checked all the NAT extemtion entries.
View 3 Replies View RelatedD-Link DIR-655 :: Does Auto Configuration Overrides Manual Configuration
Dec 14, 2012I have webcams that need port 8081 opened and I did that, everything worked fine until my DIR655 jammed up and power cycling it and the modem 3-4 times DID not make it work: no internet access and it was definitely a DIR655 problem. So, out with the paperclip to do the big reset, causing me to lose my configuration. When "most" of it came back up with my new config (I had screen prints), all was okay EXCEPT the webcams. Addresses and ports were all configured properly, address was fixed too on the client computer rather than use DHCP. I had a DNS relocation service running (DYNDNS) for the WAN side, but that address (My IP) didn't change either. I tried EVERYTHING. Finally, I realized in all my screwing around that I had enabled UPnP in my application, something I hadn't done before, but did this time as a desperation move. UPnP had always been checked off in the router. So.....I REMOVED my port forwarding and virtual server settings (either one worked before), and voila, everything working, Is this a normal occurrence, that if you have UPnP running, that this auto configuration overrides any manual configuration?
View 2 Replies View RelatedCisco :: VPN UP But No Ping LAN
Sep 29, 2011Been racking my brains out for hours now, my remote access VPN via Cisco VPN Client is UP i can ping the RA VPN DG but cant get no further than that relevant config below i can ping 192.168.250.1 and it replies with the public ip address, but i cant ping any 192.168.101.* addresses.
View 1 Replies View RelatedCisco :: Can't Ping Outside Or DMZ Using ASA 8.4
Jul 27, 2011Ok, I have a ASA 8.4 firewall that I have been working on so long. It was a hassle to configure the object group and nat for 8.4. So, I put two host in both side of ASA to test pinging but I can not ping the outside or the DMZ. I attached my nat config.
View 1 Replies View RelatedCisco :: Can't Ping From Vlan 20 To 30
Apr 19, 2012I have a network with three vlans: vlan 10 (172.16.10.0), vlan 20 (172.16.20.0) and vlan 30 (172.16.30.0).I want to make sure that clients in vlan 10 can access to vlan 30, but not access to vlan 20.Vlan 20 can also access only vlan 30.i have configured a router on a stick and the acl's, but some how i can't ping from vlan 20 to vlan 30. [code]
View 1 Replies View RelatedCisco :: Ping From Pc Over Two Vlans?
Jan 19, 2013when we ping from pc in lan 1 to pc in lan 2, what protocols we walk through in request and in response??
View 14 Replies View RelatedCisco :: Can't Ping From PC To Router
Apr 17, 2013url...I am not able to Ping from PC to PC. But i am able to ping from PC to Router and Router to Router. Heres the routers running config.
View 6 Replies View RelatedCisco :: VPN IPsec IOS Cannot Ping
Mar 3, 2011The VPN connection seems to be etablish but I can not ping the LAN behind the router .I can see the errors with debug ipsec
88.160.250.90 CLIENT VPM >>>>>>>ROUTEUR VPN 212.94.A.B>>>>>>>>>LAN 10.100.0.182
212.94.A.B (Router with configuration IPSec VPN)
88.160.250.90 (Client VPN vpnc)
192.168.2.25 (Client VPN remote ident : tun0 )
[code]....
Cisco :: Unable To Ping In Dos?
Mar 9, 2013*I have 2 cisco routers 2811 router A&B*using 0/0 for WAN and 0/1 for LAN on both routers*both routers are connected together with crossover cable to 0/0. recieve link and activity*both routers are on the same subnet Router A:0/0 192.168.1.1/24 - router A:0/1 192.168.2.1/24 ; Router B:0/0 *192.16.1.2/24 router B:0/1 192.168.3.1/24*I can ping the inside and outside address of both router from PCs connected at its respectable end. *PC A 192.168.2.2/24 PC B 192.168.3.2/24 *when connected to router A 0/1 and I try to ping router B 0/0 it times out in DOS* but I AM (CAN) able to ping from PC A to router B 0/0 in hyperterminal, telnet and Cisco SDM. I just CANNOT ping in DOS?
View 10 Replies View RelatedCisco WAN :: 2801 Cannot Always Ping 8.8.8.8
Feb 5, 2013I have a Cisco 2801 with dual ADSL WAN connections, PATing to a network hanging on the fa0/1 interface. From the server connected to the router (hanging off of the fa0/1) interface, I can ping any address and there are no issues. But from inside the Cisco CLI, pinging certain addresses causes erratic behavior. [code]
View 5 Replies View RelatedCisco WAN :: 1760 - Can't Ping Other PC
Jul 15, 2012I've made a static route between a Cisco Router 1760 and a Cisco Router 2651xm using crossover cable to connect to their Fast-Ethernet ports so this is the configuration:
2651xm(config)#ip route 192.168.10.0 255.255.255.128 192.168.1.0.
And the other router's configuration:
2651xm(config)#ip route 192.168.10.0 255.255.255.128 192.168.1.0 (Same thing)
The IP of the 2651xm is 192.168.10.2
The IP of the 1760 is 192.168.10.1.3
I'm I doing it wrong? is the destination wrong? I can't seem to ping any other IP. I've got another laptop. I've put a static IP of 192.168.10.5, the primary Laptop is using has an IP of 192.168.1.138. I'm trying to PING the 192.168.10.5 laptop. But this doesn't work.
Cisco VPN :: ASA5505 Can Ping From Asa But Not From VPN
Jan 19, 2012am not sure if it is different on the 8.2 or if I am missing something. I can connect to the vpn but cannot get to the inside computers. I can ping them from the ASA but not from the vpn client.
View 17 Replies View Related