Cisco VPN :: Installing AnyConnect With CSD 3.6.6228 On MAC?
Jan 28, 2013
Our customer is having problems with installing Anyconnect with CSD on MAC. Here is log file:
libcsd.log:
[Mon Jan 28 11:09:13.433 2013][libcsd][debug][hs_download_file_to_buffer] attempting to download file: /CACHE/sdesktop/hostscan/darwin_i386/manifest
[Mon Jan 28 11:09:13.433 2013][libcsd][debug][hs_transport_setpeer] setting peer
[Mon Jan 28 11:09:13.433 2013][libcsd][debug][hs_transport_setpeer] setting l2 peer: (https://yyy.xxx.si)
[Mon Jan 28 11:09:13.434 2013][libcsd][debug][hs_transport_setpeer] setting peer done. peer = https://yyy.xxx.si, referrer = https://yyy.xxx.si
[Mon Jan 28 11:09:13.434 2013][libcsd][debug][hs_transport_setredircount] setting redirects
[Mon Jan 28 11:09:13.434 2013][libcsd][debug][hs_transport_setredircount] setting redirects: (10)
[Mon Jan 28 11:09:13.434 2013][libcsd][debug][hs_transport_setredircount] setting redirects done
[Mon Jan 28 11:09:13.434 2013][libcsd][debug][hs_transport_get] sending get request
[Mon Jan 28 11:09:13.473 2013][libcsd][debug][hs_transport_curl_get] libcurl error: Error
It looks like there should be an redirection for downloading file and it cannot be done.
ASA version:
IOS: 8.4(2)
CSD: 3.6.6228
Anyconnect: 3.1.02026
MAC:
MAC OSX: 10.8.2 with latest updates
Kernel: Darwin 12.2.0
Kernel boot: x86_64
AnyConnect on MAC:
Anyconnect client: 3.1.02026
Components: VPN, DART and Posture
View 1 Replies
ADVERTISEMENT
Sep 13, 2012
I uninstalled all of the Lenovo built-in remote assistance software, but still am getting an error on initiating the VPN.When I try to run the client, I'm asked to select the Group, enter the Username and Password, which I do.
I get a message saying "Establishing VPN - Repairing VPN adapter", then it crashes and reports: "AnyConnect was not able to establish a connection to the specified secure gateway. Please try connecting again."
View 3 Replies
View Related
May 26, 2011
Trying to upgrade a pair of ACS servers from 5.2.0.26 base to patch 4. I have tried creating different repositiories that are SFTP, FTP, and Local. The secondary unit(ROTACS2) upgraded fine with no problems the primary(ROTACS) will not, see below.
Cisco Application Deployment Engine OS Release: 1.2ADE-OS Build Version: 1.2.0.182ADE-OS System Architecture: i386
Copyright (c) 2005-2009 by Cisco Systems, Inc.All rights reserved.Hostname: ROTACS
Version information of installed applications---------------------------------------------
Cisco ACS VERSION INFORMATION-----------------------------Version : 5.2.0.26Internal Build ID : B.3075
ROTACS/mpartain#
[code]....
It appears that the GPG key is not vaild on this primary server. The patches are in the repositories and I used the acsrepo repo to install on the ROTACS2 secondary server.I have looked through articles and the only mention is to not use TFTP, which I am not. I have also tried to apply patches 1-3 with the same results.
View 1 Replies
View Related
May 27, 2012
I'm having problems installing LMS 4.2 in other partition. I have two operating system. One on C: Windows 7 Pro and One on D:Windows Server 2008,after installing it on Windows Server 2008, i'm able to access the server using the command net start crmdmgtd; but if i restart my machine it gets and error (blue screen) and says: Could not find ntdll.dll in the dynamic library. NTSerializeboot.
View 1 Replies
View Related
Jun 6, 2012
I built a new Win2k8 server meeting all prereq's. This is a new install of LMS. Right at the beginning of the install process, i get this error and the install halts.
View 2 Replies
View Related
Jan 25, 2012
I want to install a windows operating system in my machine but my machine dont have a CD-ROM. so i want to install an OS from using my another PC(Laptop)'s CD-ROM. So is it possible to install OS into my one machine from another different machine(windows-7) via sharing the drive .
View 4 Replies
View Related
Mar 24, 2011
I am installing Cisco blank CF upgrades (double the capacity of the CF that came with the router) in Cisco 3845 routers and I cannot get the IOS to load.
Network security requires tftp be disabled, so I am limited to xmodem. Slow, but it works. I know the IOS download is good, because I can load it on the CF that came with the router.
I can install, format and read the new flash. But the download locks up and bombs about 1/3 of the way through.
Note: CF that came with the router was "C" so I used the format flash: command. The new flash reads the same as the old, except that there is no file IOS loaded.
I've never had an issue upgrading an IOS, but this is my first shot at installing on a new CF.
View 10 Replies
View Related
Dec 23, 2012
im trying to install Cisco prime LMS 4.2.3 for Windows 2008 R2 standard x64.however i have received this error message.
----- end of Dependency Handler Log File
-----Dependency Handler Errors
ERROR: csjre not found
ERROR: Component csjre is not found.
cdone : depends on :csjre
----- end of Dependency Handler Errors
[code]....
View 3 Replies
View Related
Mar 18, 2011
I was trying to install a SPA-IPSEC-2G on 7606-S chassis. I installed the SPI/SPA cards in slot 3, after that I checked with "sh module" and we could see the module "OK". After this we tried to configure a VPN tunnel but we received messages in the other router about "no ipsec package".
I was checking and I tried "sh crypto engine accelerator statistic" and we got the message: " There is no crypto device".
I don't know about installation commands in references and I don't know about restrictions or configuration modes.
View 3 Replies
View Related
Mar 24, 2012
I am wondering if i can install the LMS in two servers using one license not two?
Also i want to know if i can manage the same set of devices in both servers if they are using the same license or this will not work?
Should i select specific ranges of IP's for both server and in this case, i can use two servers with the same license?
View 4 Replies
View Related
Jul 31, 2011
I have a question relating to installing lines underground in a conduit.
We've had several lines get hit by lighting which leads to the line being bad, equipment being damaged and so on. We've then installed a new cat6e cable WITH lightning arrestors which were blown almost instantly on the first storm. This is obviously a bad ground issue, and a risk to the equipment.
This being said, I would like very much to run fiber optic cable in this conduit and then convert it to ethernet, but I don't know if fiber is susceptible to lighting like ethernet cable is, OR if there are other methods to prevent this freak of nature crap!
View 7 Replies
View Related
Dec 4, 2012
Is it possible to install the above alfa card on mac os x 10.7.4?
View 2 Replies
View Related
Sep 14, 2011
I would like to learn how to install an OS like XP or linux over the network.
View 2 Replies
View Related
Feb 22, 2011
I am looking for the appropriate procedure for connecting an external HDD to a D-Link router with a USB 2.0 port. I am told I need to create a TCP/UDP 19540 port on my system.
View 1 Replies
View Related
Feb 5, 2013
I have had my new computer up and running for 2 days amd have installed 2 games but i couldnt connect to the internet because my driver installation cd says "D: is not a valid win32 application" when i try to run it and i dont know what to do i have tried resetting cd to defaults, installing manually by going in to cd files and have tried running in safe mode but nothing works .i have windows 7 home premium 64 bit OS
View 3 Replies
View Related
Feb 4, 2013
I'm installing WIFI for my personal business, and want to make sure my server and modem are unaccessable by WIFI users. I have the modem set to 192.168.1.1 and router(wifi) to 10.0.0.1. The problem is i can still type in 192.168.1.10 (server's ip address) or 192.168.1.1 while on WIFI and i get can still get to both.
View 2 Replies
View Related
Jul 24, 2011
all the drivers required to connect to the Internet wireless,,
View 1 Replies
View Related
Feb 4, 2013
We have cisco 1941 as router in office, it's dhcp server, it has only vlan 1 192.168.4.0/24?I've set up 1142 ap for wireless clients How can i make it give clients ips from dhcp server from vlan 1 ?
View 11 Replies
View Related
Sep 17, 2012
I am trying to configure SDM 2.5 on a cisco 2600.I have access via telnet to the router and was able to change the enable password - which i think is level 15 (right?) and setup (and bring up) the ip on the ethernet interface. I can ping - and get response from - the router Trying to install SDM on the router i need to provide the default username i tried both admin/administrator but SDM can't communicate with the router?
View 21 Replies
View Related
Apr 8, 2012
I have a new deployment I am working on. I am unclear on the Inline setup. One location is configured as a trunk between the router and the switch, with voice and data traffic going through it. We will be installing a 294 inline at this site.What impact will it have on voice traffic? We are using G0/0 for management, not the Inline interfaces. Is that any additional configuraiton needed to inline if done this way? I didn't get prompted for vlan ID, or anything like that during the setup as an accelerator.Are these setup with default optimizations out of the box, or is there additional programming needed once they are online? I found where to build custom applications, but wonder if there is anything needed to be done once they are online for default traffic.
View 1 Replies
View Related
Dec 15, 2011
we have installed an evaluation version of Cisco Works LMS 4.0.1. Now we have purchased a license, but the evaluation period is over and I can't start the application anymore. Is there any possibility to install the license file after the evaluation period?
View 2 Replies
View Related
Feb 24, 2013
I've got an MSE 3310 that came with four-post rails for rack mounting. These came without instructions and we are having a hard time figuring out exactly how they work. They say General Devices C-300-S-124-RC-MOD
View 4 Replies
View Related
Jan 17, 2013
im trying to install a ios 12.2v on my switch. when the screen prompt it does not show me the user move symbol " SW1> ". all i see is " SW:" and from there i can not enter the commands to download from tftp server !
View 7 Replies
View Related
Apr 21, 2012
We have purchased "True BusinessID certificate" from Geotrust for our SSL VPN. Geotrust issued 2 certificates such as Web Server CERTIFICATE & INTERMEDIATE CA.
SSL vpn is being configured in Cisco ASA 5510 software version 7.2(3). Now we could successfully install INTERMEDIATE CA successfully to ASA but Web Server CERTIFICATE cannot install and gives the following error
*Failed to parse or verify imported certificate*
We followed this link to install the certificatesURL
We contacted geotrust regarding this errror and they suggest to install GeoTrust Root along with the Primary & Secondary Intermediate CA certificates for True BusinessID certificate. URL
1. How to install Root along with the Primary & Secondary Intermediate CA certificates on our Cisco ASA 5510 version 7.2(3) . is there any proper way to install certificate i mean ROOT--intermediate--identify ?
2. Have we seleted the exact SSL certificate from Geotrust for our SSL VPN? is there any other certificate we should get it from Geotrust?
View 7 Replies
View Related
Feb 20, 2012
Toshiba Portege, I have tried downloading their DriverTuner.exe and transfering it via Flash drive but it comes up with "Entry Point not found".
View 1 Replies
View Related
Jul 6, 2012
My PCI Ethernet LAN port seems dead after dual booting my dell Inspiron 5220 (Windows 7 Home Basic & Windows 8 PRO) and now LAN port is not detecting any plugged cable both and also not even in Linux live. In both OS network card driver is alright.Most searches over the internet opened up deep sleep mode as a reason of such failures.
View 6 Replies
View Related
Jul 7, 2011
I FORMATED THE HARDRIVE AND REINSTALED XP NOW NO INTERNET AND NO AUDO I USING A LATUDE LAPTOP
View 1 Replies
View Related
Nov 3, 2011
Yesterday work installed Kaspersky on my laptop and after trying to acess outlook and the internet today I find that although I have connection no internet page will dispay and outlook will not connect to the server.All other laptops/PS3 are working on the network except mine.Kapersky has been uninstalled, windows firewall has been turned off, various pings all returned a reply and all the settings are apparently spot on.
View 12 Replies
View Related
Mar 28, 2012
Need installing dlink router dir-615 version b2. I tried installing it but when i try to use my browsers, i'm redirected to my isp's web page, and i can not connect with skype.
View 1 Replies
View Related
Mar 24, 2012
Any methods to install windows 7 OS on 3 laptops at a time by using windows group policy management in Server 2008 LAN.
View 1 Replies
View Related
Jul 26, 2011
I recently bought a second hand in the package netgear maxrange wpn824 router, and it requires a 2.4 ghz 802.11 b/g wireless adapter and windows 98. I have a gateway laptop, operating system windows vista home premium oemact, model: md2614u and it has a ralink 802.11n wireless LAN card. Can I install and operate the wireless router even if I had diferent wireless LAN card?
View 2 Replies
View Related
Feb 2, 2013
I have a DSL modem with wireless networking, and I am trying to install a second wireless router for a separate network. The standalone wireless network has five laptops networked to a sixth laptop, in a server/client setup. To complicate things, I am plugging the server laptop into a LAN connection on the DSL modem. The server shows both the LAN connection with internet access, and the second wireless network without internet access. The client laptops just show the wireless network, without internet access.
This is exactly what I need - internet access for the server but no access for the five clients. I have each wireless router on a separate channel and only auto connect to the standalone wireless network. Is there anything I need to do to the setup of either of the routers to avoid problems?? The wireless network without internet access seems to be abnormally slow in response and I am wondering if there is any interference between networks. None of the laptops are accessing the DSL wireless network, but I still need that DSL wireless capability for other computers in the building.
View 2 Replies
View Related
Apr 17, 2011
How can I do this since my netbook has no CDROM drive?
View 2 Replies
View Related
