Cisco WAN :: 881G - Can Only Ping From Lan Not From Router
Dec 30, 2011II have a 881g conecting fine with 3G via cel 0, I Can not ping fx 8.8.8.8 or 4.2.2.2 from cli, bur from Lan everyting World fine.
View 19 Replies
ADVERTISEMENT
Cisco WAN :: 881G-K9 Activate IP Services License On This Router
Jul 23, 2011I've been already purchased current cisco device (881g-k9),my vendor told me that there is possible to actrivate adipservices license on this router (i need encryption).i'm waiting now for license from my vendor .but for now i tried to activate trial adv_IP lic and got no success on it.So question is there possible to activate AdvancedIpServices license on this router?
View 3 Replies View RelatedCisco WAN :: 3G And DSL On 881G?
Mar 21, 2011We have both DSL and 3G connection to the 881G and both are up and running.There is a NAT for easy vpn device (10.10.10.2) on this router and currently pointing to DSL interface IP (206.206.206.9) ********ip nat inside source static 10.10.10.2 206.206.206.9 extendable*********
My current requirement is that NAT for easy vpn device should work on 3G if DSL link down.So how we can achive the NAT redundancy. Even when I removed the above NAT and pointing to Cellular0, I am not seeing any translations.
Cisco WAN :: Getting 3G Configuration For 881G?
Sep 9, 2012quick question regarding a 3G access via a cisco 881G i have a partner sim card (with the same number as the one in my mobile) iserted into the router.now i have the problem that my mobile is unreachable (line busy), is there a way to use both sims at the same time?what do i have to change in the router configuration?
View 1 Replies View RelatedCisco WAN :: 881G With 3G Modem
May 24, 2011I try to make working a 881G router with integrated 3G router (cellular 0) with Bouygues or Orange, but I don't found any working configuration
View 2 Replies View RelatedCisco WAN :: 881G Getting Service And Configure
Feb 1, 2012Have customer that we need 3G at new location. Their company is an AT&T customer.So we have got from distribution a 881G and it has a PCEX-3G-HSPA-US card with it.What do you do or need to get AT&T service on this card. You call AT&T they don't know what your talking about if you say Cisco 3G card?I don't see a SIM slot which most AT&T device have a SIM card?Is there somewhere special you have to call for these to get service? Any checklist for ordering and also configuring for AT&T?FYI, we will do DHCP with it and it will be our backup ISP on and ASA if the primary internet goes down. We will just use a 172.30.x.x addressing between the ASA Outside-Backup interface and the 881G.
View 1 Replies View RelatedCisco Wireless :: 881G - Cannot Get 3G To Work
Sep 20, 2012I've been asked to configure an 881 with a Verizon 3G backup connection as a backup to the FE4 primary WAN connection. I've been unable to get any connectivity through 3G, and in most cases, as soon as I try to configure 3G, I lose connectivity through FE4.Currently, I don't even have FE4 connected. I'm just trying to get the 3G connection working, so then I can take it back to the office and have a functional 3G backup connection. [code]
View 1 Replies View RelatedCisco WAN :: 881G - SMS Commands Missing
May 22, 2012today I received a Cisco Router 881G with PCEX-3G-HSPA-G for a customer that ordered a Router with the feature to send/receive SMS and to remotely active the 3G Internet connection through SMS. I believe that the router that meets this requirement is the Router 881G that I received today. In particular, the model is:
CISCO881G-K9
Now, I installed the router and configured the 3G link that is working properly BUT all the commands related to the SMS are completely missing. In particular, I miss the command:
cellular gsm sms send
gsm sms archive path
In the following documentation I see that these commands should be available: [URL]The fact that these commands are missing sounds very strange to me since the documentation is pretty clear. Do I need to activate any license? I also upgraded tha router to the last version...
Here it is the show version of the Router:
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.2(3)T, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Sat 24-Mar-12 00:00 by prod_rel_team
ROM: System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
[code]....
Cisco :: 881G - OID Of Track 2 (Advanced IP SLA)
Mar 27, 2012i have a 881G and an IP SLA icmp configured. (ip sla 1). I can get the status of it by the OID:
1.3.6.1.4.1.9.9.42.1.2.10.1.1.1
But, on the same router i have a track 1 for the SLA 1 and a track 2 monitoring track 1 with threshold . What i want, is to get the OID of track 2 so i can get the status of it. Which OID is that?
Cisco Wireless :: 881G With External Antenna?
Sep 12, 2010an external Antenna for a 881G? We're using AT&T.
View 4 Replies View RelatedCisco WAN :: 881g Dual NAT Failover Not Working
Mar 24, 2011Below is the config has done on my 881g but the dual NAT failover is not working.I have a easy vpn over NAT (easy vpn firewall: 10.10.10.2 behind the router).
1. After completed the config, I shut down the FastEthernet4, cleared the nat translations, found that nat translations are happening on to Cellular0 with error ( Incomplete ESP translations: 0 esp_conn=0x85A91FF0, hanging off nat entry 0x85A7D1D0)But still the easy vpn is not up as I am not able to ping the remote devices.
2. If I reboot the router then the nat translations are happening with no above error and easy vpn is up and I am able to ping the remote servers. Below is the config, what needs to be done to achieve the NAT failover and easy VPN up.
interface FastEthernet4 bandwidth 2048 ip address 206.206.206.2 255.255.255.240 ip flow ingress ip nat outside ip virtual-reassembly duplex auto speed auto interface Cellular0 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer in-band dialer string gsm dialer-group 1 async mode interactive ppp chap hostname. [code]
Cisco WAN :: Boot Image Failover On 881G?
Apr 29, 2012We deploy 881G routers at our store locations and are planning to upgrade the IOS to 15.2.2. One concern we have is if the router fails to boot to the new image. Is there a way to configure a second boot image as a failover in case the primary boot image does not load? Our current DR plan is to have a laptop on site that we can connect to remotely and setup a console session to manually change the boot file. This can be cumbersome and time consuming, so I'm wondering if the 881 has the ability to have another file loaded if the boot fails.
View 4 Replies View RelatedCisco WAN :: 881G - Trace Back Logs
Nov 28, 2011I am receiving trace back logs in the 881G with 3G module. And after reload, the router is going to Initial Config. mode. What the latest IOS is?
Current IOS I am using is c880data-universalk9-mz.151-1.T3.bin. Any better IOS for complete efficient use of the PCEX-HSPA-G Module ?
Cisco WAN :: Configuring 881G-K9 Cellular Interface
Jun 3, 2013I have an issue regarding using cellular interface on cisco 881G. The 3G module is Aircard 504. SIMcard is working on other devices, it have obtain IP address from mobile operator. But on cisco881G it doesnt work.
Here is config:
cellular 0 gsm profile create 1 m2m
chat-script 3G "" "ATDT*98*4#" TIMEOUT 30 CONNECT
interface Cellular0
[Code].....
Cisco Switching/Routing :: 4.2.2 Unable To Ping 1 Internet Site From Edge Router Able To Ping
Jan 18, 2013From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
View 25 Replies View RelatedCisco WAN :: Configuring Cellular 0 On 881G With Embedded 3G Modem
Jun 5, 2012 I have a Cisco 881G with PCEX-HSPA-3G card for which I have successfully configured for internet. As the above one has come to end of life, we got the replacement 881G with embedded 3G modem.
I can't get Cellular 0 to use ppp encapsulation:
Router(config-if)#encapsulation ppp
Cellular0: Only SLIP encapsulation supported
Router(config-if)#
[Code].....
Cisco WAN :: 881G Cellular Interface Working With R-uim Cards?
Jan 6, 2012Can Cisco 881G cellular interface (Modem Firmware Version = K2_0_7_19AP C:/WS/FW) work with r-uim cards? I can't find correct answer in documentation .
View 2 Replies View RelatedCisco WAN :: 881G DHCP Configure To Use Both Cellular Interface
Jan 22, 2013I would like to configure the 881G to use both the cellular interface and Fe4 WAN port for internet connectivity.Interface Fe4 is connected to an ADSL router.
I have configure each interface with a default route and weighting:
ip route 0.0.0.0 0.0.0.0 Dialer0 200
ip route 0.0.0.0 0.0.0.0 FastEthernet 4 100
I need to configure Fe4 to get an address as a DHCP client:
interface FastEthernet4
ip address dhcp
no shut
duplex auto
speed auto
How do I remove Fe4 from VLAN1? There is some existing config around VLAN 1:
interface Vlan1
ip address 10.73.0.1 255.255.255.0
ip helper-address 192.168.140.13
ip tcp adjust-mss 1400
no autostate
ip sla 100
icmp-echo 10.64.4.15 source-interface Vlan1
tag 3G Keepalive
frequency 10
Then I guess I need to adjust my Internet-IN ACL to allow broadcasts and UDP 67 and 68?
Cisco WAN :: 881g 3g Cannot Find Documentation About Sending USSD Requests
Aug 4, 2011I have Cisco 881g with 3g.I can;'t find any documentation about sending USSD requests from 3g module.is it possible to send USSD request ?
View 0 Replies View RelatedCisco Firewall :: IOS Zone Based Firewall Websense URL Filtering Feature On 881G
Jul 27, 2011I've been trying to configured Websense urlfiltering using ZFW feature on my Cisco 881G router. The router is running on IOS 15.0(1)M with Advanced IP Services. And I have confirmed it supports urlfilter feature.
This is what I tried to accomplish but IOS version 15.0x seems to have different command set.
-----------------------
class-map type inspect httptraffic
match protocol http
parameter-map type urlfilter param
server vendor websense 10.20.30.40
[Code]...
Cisco Switching/Routing :: 3560G Can Ping Devices In Enterprise LAN But Cannot Ping Interface
Mar 31, 2012I have a new 3560G to set up a small network for a remote site. I configured the vlan and an SVI as the gateway. The switch is also the DHCP server for the LAN. I configured Gi0/2 as L3 port, connecting to the nearest neighbor. My network runs EIGRP so i advertised the routes into the EIGRP process. The switch forms EIGRP neighbors and learns all routes in the enterprise network. The problems I'm having now are: 1. The switch learns all routes in my enterprise LAN and can ping devices in the enterprise LAN, but I can’t ping any interface on the switch from the enterprise LAN. 2.
View 5 Replies View RelatedCisco Switching/Routing :: Can Ping From R1 To R3 SVI4 Gateway But Cannot Ping Host
Dec 12, 2011I set this up and I can ping all the gateways but never the hosts. I was hoping I could make these links between 6500's a mix of L2 and L3. Check it out. They are connected in a linear fashion R1--->R2--->R3. I can ping from R1 to R3's SVI4 gateway but I can never ping a host on that SVI4. I was hoping that I could use the port-channels between 6500's as routed links or as trunk links depending on the type of traffic....thought it would ease the migration. I suppose I could always get rid of the port-channels and just make separate L2 and L3 links between the 6500's.
View 3 Replies View RelatedRouters / Switches :: Windows Ping Success But Mac Ping Fails
Aug 15, 2011When I ping an address from my windows machine, it succeeds, but when I ping to the same IP on my MAC OS X machine, it fails.
1. Why?
2. How to get successful ping on my MAC machine?
Can Ping From Server But Can't Ping To Work Stations
Jan 26, 2012I installed window server 2003 in a old Pentium III server as a standalone test server. Now I want to use it as a print server and connected it to the domain. I can ping workstations and other servers from that test svr. But i cannot ping that test server from the work stations.
View 2 Replies View RelatedCan't Ping XBox 360 But Can Ping Other Devices
Mar 1, 2013I had both a Westell 7500 and a Linksys Router working fine and had my 360 setup as an extender for Windows Media Center so I could stream TV, Music, Movies, etc from my desktop to the 360. Then I switched my modem/router out with a Zyxel PH5001Z
So now today I noticed that I can no longer find my desktop through the XBox. I have adjusted my firewall settings on the modem itself, even completely disabling it. UPnP is enabled for the 360 and the device is showing under my device table. At first I wasn't able to ping any network devices but after creating an ICMPv4 Firewall rule it worked fine. I've confirmed the XBox IP Address through Network Map, the Device Table on the modem and through Network Settings on the XBox. I've diabled my modem firewall as well as Windows Firewall, completely and I still can't ping my XBox or set it up as an Extender.
I have the XBox connected wirelessly using WPA2-Personal and it's operating in 802.11g/n mode.
Linksys Wireless Router :: High Ping And Latency Using E1200 Router
Nov 3, 2012I recently moved from an old apartment in Downtown Montreal, to a suburb area, but still close to where I was before (10 km). I am using the same ISP provider, Videotron. The same speed. I was playing this game, Chivalry Medieval warfare, perfectly fine before, but now something is really wrong. Whenever I join a server, my ping skyrockets up to close to 200, sometimes drifting to 130 but never going below... and often rising back up again.Keep in mind that I filter servers by their pings. I only join servers that display a low ping (although often I won't see any, when I refresh.. there they are). I'll see a server with 30 ping, join it, and be at 200.It's entirely unplayable. Not only is it impossible to properly time parries anymore, but I also get a lot of rubberbanding. I've tested the internet here, and the speeds are accurate. 10 mbps down, 1 mbps up. I am connected to a Linksys E1200 router. I've tried everything I can possibly think of.I went into the router setup, disabled the firewall, added myself to a DMZ, tried to forward every port... rebooted the modem, my computer, the router, tried a different Ethernet cable.. nothing is working. It's very depressing. Nothing has changed on my own computer in the move. I also notice there is a delay of a second or so before I start to load a webpage when I click a link.
View 9 Replies View RelatedCisco :: Can't Ping From PC To Router
Apr 17, 2013url...I am not able to Ping from PC to PC. But i am able to ping from PC to Router and Router to Router. Heres the routers running config.
View 6 Replies View RelatedLinksys Wireless Router :: E4200 Ping To Router Very Unstable
Sep 8, 2011I noticed some serious random ping spikes in online games and found that the connection between my Laptop and the E4200 is very very unstable. Sometimes it works perfectly fine but at other times my ping will spike each 5 seconds to three or even four digits and back to normal. I never get disconnected but playing is obviously not possible.
I ran several pingtests through pingtest.net and got everything from 15ms ping 3ms jitter to like 400 ping 300 jitter.
Eventually, I pinged the router (192.168.1.1) and got delays between 2ms and 300ms for both the 2.4 ghz and the 5ghz network. The 2.4ghz channels are fairly crowded but the signal is perfectly fine and stable. The 5ghz band is totally free therefore interference shouldn't be a problem i guess.
Can't Ping From 192.168.50.0/24 Network On Cisco Router 1
Feb 8, 2011I can't ping from the 192.168.50.0/24 network on Cisco Router 1. The router is connected with network 192.168.1.0 to a linksys router. I also can't ping from the linksys router to a IP address that is connected to the cisco router.
View 3 Replies View RelatedCisco Firewall :: ASA 8.4 Cannot Ping Outside Behind Router
Jun 9, 2013I have simple setup lab in a GNS3. I having a problem pinging from the ASA to the outside world. If I'm in the rotuer, I can ping fine(ping 4.2.2.2), I'm getting reply back. But no luck on the ASA itself. For now I just wanted to get the ASA to ping outside the cloud. Then later I play around with the host pc. ASA Version 8.4(2) [code]
View 2 Replies View RelatedInconsistent Ping To Router
Apr 22, 2012I'm renting accommodation, so I don't have direct access to the router etc.It's a Belkin (who I understand to be a pile of ****) router.The ping is mostly 6-8ms, but ~10% of the time it spikes to >100ms.This is way too high for a router right? Surely it should be like, 1ms.Wireless connection.It broadcasts two SSIDs (one is the other but with 5ghz appended).
[code]...
How To Ping Second Broadband Router
Jul 26, 2012I have three router belkin basic n150 and two router are connected to one router and gateware is first router 192.168.2.1 and also change ip address of two router 192.168.3.1,192.168.4.1 and internet is working but my problem is if i ping the two router ip address 192.168.3.1,192.168.4.1 is not pinging . How i ping the second router
View 1 Replies View RelatedCisco Router / Ping Not Working - No Response?
Mar 20, 2013I have the following LAN setup: I am trying to ping the Wireless Access point (10.60.1.1) from the Cisco Router (172.16.88.21) but I am not getting responces. I can however ping 10.60.1.1 from server (172.16.88.36). Tracert from the server shows that it is going through the Rotuer and Firewall.
View 8 Replies View Related
