Cisco WAN :: How Many NM-32A Or NM-16A Module Can Be Installed On 3745 And 3640
Jul 19, 2011how many NM-32A or NM-16A module can be installed on 3745 and 3640 routers?
View 1 Replies
ADVERTISEMENT
Cisco WAN :: Routing With 3640 And 3745 Via WIC-2T
Feb 8, 2012I have two routers I am trying to connect via the WIC-2T port. I can ping from router to router, but not from my PC (192.168.2.122) to the 3745 (10.0.1.3)..
3640:
Current configuration : 1846 bytes
!
version 12.2
[Code].....
Cisco WAN :: How Many Subrate T3/E3 Port Card Can Be Installed In 3745
Dec 21, 2011I have a Cisco 3745 Router with 1 Subrate T3/E3 port card installed on it. We want to add another T3/E3 card,
Q1- Can i add another card in this model? Q2- Can we multilink bundle up two T3/E3 cards? (current we have a single DS3 P2P connection between two office, so want to increase the bandwidth)
Cisco WAN :: GRE Over IPSEC On 3745 With VPN Module CPU
Jun 19, 2012i just configured GRE over IPSEC on my Cisco 3745 router with VPN module installed. As soon i hit 25Mbps traffic, my CPU is touching 80%.
What maximum Traffic 3745 with GRE over IPSEC it can support?
Also show process CPU sorted dont show any evidence of which process eating it up.
sh processes cpu sorted
CPU utilization for five seconds: 75%/75%; one minute: 77%; five minutes: 78%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
[Code].....
Cisco WAN :: Does 3745 1FE2W Module Support MPLS
Jan 16, 2011I have a couple of these routers in the lab with a very basic MPLS configuration on them. Everything works fine on the fixed interfaces but I cannot get the ldp neighborship to form between the 1FE2W interfaces on each router. Does this module support MPLS?
View 3 Replies View RelatedCisco Firewall :: CSC Module Installed In ASA 5510 Unresponsive?
Oct 29, 2011I found my CSC module installed in ASA 5510 unresponsive. I tried to recover / re-image the module with .bin file. but I think it is not possible to re-image because there is no rechability with CSC module, and session 1 command also doesn't work,
you can see the response here.
CS-ASA# session 1
Opening command session with slot 1.
Card in slot 1 did not respond to session request.
CS-ASA#
In this case how to enter into the module?
I removed and inserted the module and tried to reach to it .. but couldnt solve . I just wanted to know whether hardware is dead or not.
Cisco WAN :: Install New Nexus 7K Installed SUP And One 32-Port 10Gb Module?
Jun 29, 2011I am going to install new Nexus 7K. Installed SUP and one 32-Port 10Gb module. When I open the box to install this 10Gb module, I saw that there is a carbon paper is tighted with ***** on the top of the module. confirm either it will insert in Switch with carbon paper or have to remove this carbon paper?
View 1 Replies View RelatedCisco Switching/Routing :: CAT 4500E Installed With WS-X4648-RJ45-E Module
Jun 29, 2012I have cat4500 with subject module. There is strange behaviour over module installed in 3rd slot only, some ports are connected, UP & working fine. But If I am connecting new ports over same module, are not coming UP.Duplex/speed settings already checked & are fine. If i connect same machine to any other module, it perfectly comes up & operation is fine.
View 3 Replies View RelatedCisco WAN :: Command To View What Type Of SFP Module Installed In Catalyst 3750 Switch?
Jan 20, 2013Is there a command that can be used to view what type of SFP module that is installed in Catalyst 3750 switch?
View 6 Replies View RelatedCisco WAN :: 3640 - How To Get IOS Upgrade
Feb 25, 2013I'm looking to upgrade the iOS on a Cisco 3640 to the last supported level, 12.4.25, and then see what I can make it do.
I'm understanding that the only way to acquire a legitimate copy of the appropriate iOS version is to pay for a service contract, even though I won't need any other service provided for it.
Cisco WAN :: 3640 IP NAT Forward 443 ASA VPN
Apr 1, 2013when dealing with NATing with port fowarding from a specific IP range on the outside to a inside IP address. Here is what I have now:Cisco 3640 WAN Router: [code]
which ofcouurse did not work and ASA did not respond to 443 on either Anyconnect or HTTPS. Nothing showing in"show ip nat translations" for the incoming traffic from “ip nat outside source static tcp 15.236.10.0 192.168.4.2” and “ip nat inside source static tcp 192.168.4.2 15.236.10.0”
Cisco WAN :: 3640 Router Setup For 6 T1
Oct 24, 2012We have a location that currently has one frame T1 and 4 point-to-point T1s. We are looking at adding a second frame T1 to be bonded with the first. Currently, we have an old 3640 router, so I am thinking this would be a good time for an upgrade. Cost is a concern, so I am hoping to buy something refurbished that is newer than what we have now but is not going to cost a ton as buying new would. My thought is either a 2821 or 2921 with 2 HWIC-4T1/E1. I am not familiar with this HWIC just wanting to make sure this a good solution for our situation.
View 8 Replies View RelatedCisco Firewall :: 3640 - Recovering Deleted IOS
Jun 27, 2011i have a cisco 3640 router that i have deleted the image without saving and the router is in ROMM mode i wish to use tftp to download the image
View 2 Replies View RelatedCisco Switching/Routing :: 3640 / ATM Over Ethernet Not Working
Apr 28, 2013I'm using 3640 router running on c3640-js-mz.124-25d.bin IOS. I'm using NM-1A-OC3SML= (ATM OC3, long reach single mode) interface card. Now my pc is connected an fast ethernet interface of the router. Need to know the ATM configuration on this cisco 3640 router in order to achieve the ATM over ethernet traffic get success. As of now i've confugred as below but it's not working it seems.
interface ATM2/0
bandwidth 120000
ip address 10.2.2.1 255.255.255.0
no atm ilmi-keepalive
pvc 0/36
protocol ip 10.2.2.10 broadcast
cbr 70000
encapsulation aal5mux ip
let me know the correct encapsulation type for the connectivity.
Cisco WAN :: 3640 How To Test / Troubleshoot Async Port
May 4, 2011I have a NM-4A/S serial network module which I suspect is having problem on a Cisco 3640 router. Is there a way which I can test the async ports out without connecting to any other devices? [code]
View 2 Replies View RelatedCisco VPN :: Unable To Delete Certificate From 3640 Router?
May 13, 2012i have configured a cisco router with the following configuration to practice obtaining certificates from a microsoft 2008 server configured as a stand alone CA.this part works okay but what i am trying to do next is giving me a headachei am trying to delete the identity certificate but am having no luck whatsoever
interface FastEthernet0/0ip address 192.168.2.1 255.255.255.0ip nat outsideno shut
interface FastEthernet0/1ip address 192.168.1.1 255.255.255.0ip nat insideno shut
access-list 101 permit ip 192.168.1.0 0.0.0.255 192.168.5.0 0.0.0.255
access-list 102 deny ip 192.168.1.0 0.0.0.255 192.168.5.0 0.0.0.255access-list 102 permit ip 192.168.1.0 0.0.0.255 any
[code].....
i entered the following commands on the router to delete the certificatebut as you can see its telling me the certificate dosn't exist(this method of deleting the cert has come from Richard Deals complete cisco vpn configuration guide) 3Purley(config)#crypto ca certificate chain PurleyPurley(config-cert-chain)#no certificate 61E0446A000000000002% Certificate not found.ps the router is a 3640 running c3640-jk9o3s-mz.124-7.bin
Cisco WAN :: 3640 Series Router Reloading Endlessly?
May 14, 2011I have been confronted with an issue recently with two of my 3640 series router reloading endlessly.Initially i thought it could be a matter of MEM not well seated, but unfortunately it wasn't the problem.i have attached the gibberish produced when these routers are booted up.Be informed as well that these devices are loaded with max MEM.
View 1 Replies View RelatedCisco WAN :: 3640 / Load Sharing Between DSL And T1 Link On Router?
Oct 17, 2011i have 2 x T1 terminating on border router cisco 3640 route. (configured using multilink interface). Our IP block is routed on this bundled T1 circuits by At&T. I want more internet bandwidth.
1. Can i connect my DSL (on ethernet interface and using static DSL IP) on the same router and confgure two static routes to internet - one to multilink interface and other to ethernet interface (connected to DSL) ?
2. I have many servers using static NAT to external IPs which are routed on T1 circuits. Will it get into issues when communicating to outside? [for example my exchange server, websites etc?
Cisco WAN :: L2L VPN / 3640 With IOS 12.3(16) - Unable To Recognize Crypto Commands
May 23, 2013 I have a Cisco 3640 router with IOS v.12.3(16) It does not recognize the crypto commands.
#sh version Cisco Internetwork Operating System Software IOS (tm) 3600 Software (C3640-I-M), Version 12.3(16), RELEASE SOFTWARE (fc4) Technical Support: [URL] Copyright (c) 1986-2005 by cisco Systems, Inc. Compiled Tue 23-Aug-05 20:03 by ssearch Image text-base: 0x60008B00, data-base: 0x60D36000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) ROM: 3600 Software (C3640-I-M), Version 12.3(16), RELEASE SOFTWARE (fc4)
router01 uptime is 3 hours, 43 minutes System returned to ROM by power-on System image file is "flash:c3640-i-mz.123-16.bin"
[code]....
Cisco Switching/Routing :: 3640 Router Hangs
Sep 23, 2012The Cisco 3600 series (3640) is hanged during booting proccess, the IOS is decompressed, but after some text it hanges and I even cannot go to user exec. ROMmon and bypassing the config setting, but the result is still the same.
View 5 Replies View RelatedCisco Switching/Routing :: 3640 Can't Apply Service-policy?
Mar 21, 2013I got this 3640, trying to apply a service-policy (output and input), but seems like I do it something wrong...because he only apply the output policy... here the config, I already try to config the service police inside the fa0/0, but is not showed at all, he only show the output, its like I never apply that
View 1 Replies View RelatedCisco Switching/Routing :: System Crash 2611 And 3640
Apr 8, 2013I got some unexpected System crash, and this happens to 2 different routers on the same network.. (We suffer a Crash and change the router, happens the same to the new router after some time, maybe 40 minutes!!)
Here is the last console report for the new router....
%Software-forced reload
Preparing to dump core...
4w1d: %SYS-2-WATCHDOG: Process aborted on watchdog timeout, process = IP NAT Age
[Code]....
Cisco Switching/Routing :: 3640 Can't Route Traffic Until Pinging
Nov 1, 2011We have a Cisco 3640 router running c3640-is-mz.123-3g.bin Switching ports are devided into several VLans. Each VLan has its own IP subnet. We can't ping IP address X in subnet A from subnet B unless we log into the router and ping it from there first. (and then the IP address will show up in "show ip arp" command. Then we can ping X in subnet A from subnet B, and browse web on device X from subnet B, etc. )
View 6 Replies View RelatedNetworking :: Upgrading 3640 IOS Via Xmodem Console Using ROMmon
May 10, 2011So apparently the 3600 series do not support the tftpdnld to upgrade your ISO when you upgrade your flash. You have to use the Xmodem transfer as described here: Xmodem Console Download Procedure Using ROMmon [URL]. everything is going great but it is going to take another 3 hours.
Now when i installed the new flash at bootup it said the "device does not contain a valid magic number" now that is just because the flash is not formatting correctly and downloading the new flash file automatically formats the flash setup?
Cisco Switching/Routing :: Creating A Span Port On Router 3640
Oct 1, 2012i am running c3640-is-mz.124-21.bin on a cisco router 3640. i am trying to create a monitor session in the CLI and everytime i type the command Router(config)#monitor session 1 interface ethernet2/1 % Invalid input detected at '^' marker. Router(config)#monitor session 1 interface ethernet2/1 ^% Invalid input detected at '^' marker. i get the error invalid input ?
View 10 Replies View RelatedCisco WAN :: 3640 Router / Catalyst 2912 Switch - Ethernet Link?
Feb 8, 2011I have a 3640 router with 4 Fast Ethernet Network Modules (1fe-tx, 1fe2w & 2fe2w-v2) and a Catalyst 2912 switch. I can not acheive a link between the 2 devices. All four will not get a link light and the interface(s) show no errors. If I plug the Router nic into virtually any other switch or workstation it works flawlessly. I put a switch between the catalyst and the 3640 and it works without error.
Steps I have tried...
1. Configure interfaces on both Switch and Router to Auto Speed, Auto Duplex2. Configure interfaces on both Switch and Router to speed 100, Full Duplex3. Try Both Crossover and Straight-Through verified working cables.4. Tried a second 2912xl-en switch
Both 2912 switches are factory defaulted, other then the changes I made to the speed and duplex to try to get them connected.Both the router and switches have been doing other functions (seperatlly) within our network for years?So my question is...Why is the NICs in the router compatible with every other vendor other than CISCO?
Cisco Switching/Routing :: 3640 GLBP Working Now Want Interface Redundancy?
Dec 6, 2011So I have 2 routers (cisco 3640) that each go to their own ISP and then back to the same switch. I have setup ospf and glbp, and now have pretty good redundancy. If either internet connection or routers go down everything is still golden.
So I was thinking that if an interface went down then the router would not be load balanced with glbp which got me thinking whats the best way to get interface redundancy (and I was going to add a 2nd switch with the second interface).
1) Setup BVI on the 2 interfaces.
2) Setup a 2nd interfaces (on each router), I would have to split the subnet, for instance: [code]then the machines could be on the subnet 192.168.0. 0/23 and setup glbp for 1 ip across all 4 interfaces (I'm not even sure if you can do this but think it would work).
3) Is there a way to utilize etherchannel or anything like this
A negative to option 2 would be that if 1 of the interfaces went down, all the sudden 2/3 (or so) of your traffic would be going through 1 router.
Cisco Switching/Routing :: 2600 / 3640 WIC-2T Configuring Serials Modules
Feb 5, 2012How to configure my serial modules on my 2600 and 3640? Each router has the WIC-2T with two cables connecting them. I tried to ping one router from the other, but no luck. Serial IP address I just made up, this is my home lab, so if I messed those up some how,
Here is the running config for each rotuer:
2610:
Current configuration : 1071 bytes
!
version 12.3
[Code]...
Cisco WAN :: How To Run GetVPN On 3745
Jun 6, 2011I need to connect site to MPLS provider and run Cisco GETVPN.Problem:I have been browsing Cisco Feature Navigator Tool and to my surprise when I enter "platform:3745" I can't find an image compatible with GET VPN. there is no workaround (image) I can run GET VPN on 3745? I need IP routing (BGP, OSPF) as well.
View 1 Replies View RelatedCisco Switching/Routing :: 3845 / 3640 - GLBP - Weighting Based On Bandwidth For One PPP Of Many?
Dec 28, 2011I have two routers at our core data center, a 3845 and a 3640. These are configured with GLBP. There are 4 remote sites:
Site #1: One T1 link to the 3825
Site #2: One T1 link to the 3825, and One T1 link to the 3640
Site #3: One T1 link to the 3825, and One T1 link to the 3640
Site #4: One fractional T1 link to the 3825, and One T1 link to the 3640.
My question regards site #4. If i understand correctly, GLBP works on the premise of "host" balancing, and not true "load" balancing. The reason I ask is that the large majority of our WAN traffic is from our Exchange server to our remote sites. In the case of site #4, our exchange server is sending traffic on the fractional T1. Is there any way with GLBP to either split this traffic from a particular host across two links in a round-robin fashion, but leave other hosts to travel wherever the router sends them, or, to force at least our exchange server to use the full T1, rather than the fractional?
I've read up on the weighting mechanism, and it appears that tracking an interface has nothing to do with bandwidth use. If I understand correctly, if I were to track the Site #4 PPP to the 3640, and give a weight of 10 to glbp on there, it would really only take affect if the interface is down. It will have nothing to do with host AVF election.For the record, exchange traffic is constant to this site, so there is no chance for the host connection to reset and potentially elect to use the larger pipe. I would like to "tweak" this to make better use of available bandwidth.
Cisco Switching/Routing :: 3640 What IOS Version Can Support IPv6 RIP In Hardware Limit
Jun 25, 2012I have the cisco 3640 with IOS Version 12.2(46) , and it with DRAM:32M , Flash:8M.What IOS version can support IPv6 RIP in the hardware limit?
View 3 Replies View RelatedCisco WAN :: 3745 IOS 15.2 Changed Commands
Jan 22, 2012we've got a pair of old 3745's that are getting upgraded to new 2911's, and I'm trying to run IOS 15.2 on the new routers to get them most current before going into test and production use.The routers are doing BGP, IPv4, and HSRP, and I'm trying to put one in at a time as to not have to big bang everything at once. I'm putting the one that matters least in first, and basically using the same config as the old one, which was running IOS 11.
I was using "no ip mroute-cache" on ethernet interfaces, and it says that command is deprecated and I should use the MFIB commands instead. Darn if I know what that means, I believe it was set up so the ethernet interfaces had IP multicast fast switching disabled, which was set up by our vendor 10 years ago so I'm not sure if it matters. It would seem logical to me this would have an impact on HSRP and speed of failover. Does this matter, and if so how in the world do I do this with IOS 15.2?The second one is the use of "no fair-queue" on our serial connection for a T1. This command isn't there either, and I'm not sure if I even need to bother on this. It was set up on the old router on a T1 Frame Relay circuit.
Cisco WAN :: What Is Best Router To Be Replaced 3745 EOL
Jan 15, 2012There is no special requirements, just need new hardware with some reserve availability. As for now it's 3745 EOL and I assume to use 3945.
View 4 Replies View Related
