Cisco WAN :: Receiving 99% CPU On 6500?

Mar 29, 2011

I'm receiving about 99%CPU on 6500 .Butwhen i go show cpu sorted ,i can't see any process taking more than 2% load .My IOS is s72033-ipservicesk9_wan-mz.122-18.SXF13.bin
6500#sh processes cpu sorted | exclude 0.00CPU utilization for five seconds: 99%/97%; one minute: 99%; five minutes: 99% PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process 114       11136      1772       6284  0.79%  0.13%  0.30%   1 Virtual Exec   6    84386920   6320367      13351  0.71%  0.27%  0.23%   0 Check heaps 123    94861244 849807118        111  0.31%  0.38%  0.39%   0 IP Input 180    10647916  52152600        204  0.07%  0.03%  0.02%   0 CEF process 316    12053884  68553405        175  0.07%  0.21%  0.08%   0 OSPF Router 1 281    31925228 239981938        133  0.07%  0.04%  0.05%   0 Port manager per 213    61331112 213008378        287  0.07%  0.08%  0.09%   0 SNMP ENGINE  37     5577644  36376566        153  0.07%  0.05%  0.02%   0 Per-Second Jobs

View 7 Replies


Cisco Switching/Routing :: Upgrade 6500 Non Modular IOS To Normal 6500?

Dec 21, 2011

how can we upgrade 6500 non modular ios to normal 6500 ios?

View 5 Replies View Related

Receiving Way Too Many Bytes?

Feb 12, 2011

For the last 3 weeks or so (right around the time I upgraded to IE8), my computer has been receiving a ridiculous number of bytes compared to what it sends.Within 5-10 minutes of logging on (I still use dialup), a check on the status shows around 100,000 bytes sent and over 2,000,000 received.I've been online for around 40 minutes, and it currently shows 650,000 sent (23% compression rate) and over 5,000,000 received (4% compression rate).Of course, the browser starts lagging and freezing after a while, which I assume is from the large number of bytes being received.

At the same time, there's a noticeable lag when I try to run programs, even when offline. For example,I click on my ISP connection and nothing happens for 5-6 seconds, then the dialog box appears. This is something that's never happened before. I'm running XP Home and no one else has access to my computer.I'm using the standard Windows firewall.I've run my AV and spyware programs multiple times (nothing found), cleaned my temporary files and cookies, even adjusted the FIFO buffers (the last thing I tried was turning the buffers off). I've been running Disk Cleanup everyday (which lags and runs slower than ever before), but it doesn't solve anything.I don't know how to adjust the compression rate for bytes received to see if that works.

View 4 Replies View Related

Sending But Not Receiving Packets?

Jun 26, 2011

One Day the internet is fine the next day The Internet Stopped working. The problem is my pc is sending packets but not receiving any i though it was a bug or something so i restarted my pc after i restarted my pc the internet was working fine until a couple of minutes passed it stopped receiving packets again.i tried resetting the modem but nothing worked.I tried winsock fix or resetting TCP/IP and stuff but nothing workscause its starting to frustrate me.

View 14 Replies View Related

Sending But Not Receiving Packets

Sep 26, 2011

Our computer is sending but not receiving packets. We've tried 3 different wi-fi adapters, and that wasn't the problem. We have no idea what's wrong? It won't pick up any wireless signals by the way, and it works fine while connected via Ethernet.

View 5 Replies View Related

LAN Connection Not Receiving Packets

Aug 7, 2012

I have a home network that does not connect to the internet, but which I use to play games on, or did before this issue happened by.For years my PC's and friends ones had been able to connect into the network with little or no problems, but a few months ago my tower PC just stopped picking anybody or anything up on the network and I have tried tons of different resolutions to solve this.Anyway, the other day I bought a new HD and installed XP SP3 again on it, and for about fifteen minutes I could connect to my Vista Laptop and share files and play games, then it stopped.Next day the same again and off and on till now when its been down for the last week.I have also now bought a new network card - no difference - and disabled the on board network card through the BIOS - no difference.I have done a Winsock repair, replaced automatic IP addresses with manual ones, and countless other remedies which have not solved diddly.

View 14 Replies View Related

Is GPS A Transmitter As Well As Receiving Device

May 1, 2011

My GPS was simply triangulating my location and then comparing that location to mapping information stored in my device to give me my next turn, among other information. From the referenced article, it appears that this device is doing a lot more than that, namely it is compiling information about my location and even my speed, sending it to the GPS manufacturer where that information is being compiled and sold.

View 2 Replies View Related

Cisco Wireless :: 5508 - Client Not Receiving The IP?

Apr 12, 2011

I have two number of WLC model 5508 running IOS version And One WLC in DMZ with the same model and IOS version. AP model is 1141. The Two WLCs are integrated with ACS. I have a SSID named EMployee. The DHCP for the users are configured in a seperate DHCP server and i have mapped this DHCP server IP to the interaface Employee.And this interface is mapped to the SSID as well..  But my client is not receiving the DHCP IP. Attached are the debug logs from the client.

View 9 Replies View Related

LAN Sending 0 Packet But Receiving Many Unwanted?

May 27, 2011

my local area connection is sending 0 packet and receiving unwanted packet

View 1 Replies View Related

Not Receiving Enough Network Packets To Surf Web?

Apr 7, 2011

I have a Asus EEE PC 900 laptop running Windows XP Home. I DO NOT use a modem or router. I connect wireless to someones network (which of course i dont know who it is or how far it is from me) I connect to a Linksys unsecured network. I get good to very good (some times excellent connection from it) The name of my adapter is: Atheros AR5007EG wireless network adapter.Two days ago i was on the internet, and all of a sudden i Lost service ( usually when this happens i wait it out and it comes back)But it hasn't.So I'm checking through my settings and i noticed that im sending way more network packets than receiving. Last i checked it was around 40,000 sent and 5 received. So I wait and wait and wait and the most packets it would go up to is 90 while as sending is still in the thousands.It also says im successfully connected with good to very good connection status (but yet i cannot surf the web because i do not have enough network packets)

I tried different locations in my house (that didnt work)I uninstall and reinstalled my network adaptor (that didnt work)I turned off and on the wireless switch(that didn't work). Im wondering if this has something to do with my laptop or the other persons network? how can I increase the received network packets?

View 2 Replies View Related

Desktop Sending And Receiving But Still No Internet?

Apr 18, 2013

I had a customer call me and her desktop (wired connection only) is sending and receiving packets but she still cannot connect to the internet. Customer has tried power cycling her modem, router and desktop with no avail. Her system is running XP.

View 13 Replies View Related

Receiving Email From A Closed Account?

Apr 13, 2012

if an email can be sent from a persons private account after the account has been closed.

View 15 Replies View Related

Constant Sending And Receiving Bytes

Jul 28, 2011

When i look at the network wirless connection status something is constantly sending and receiving Bytes and lots of them.the modem gets warm from all of the activity.

View 6 Replies View Related

Can't Connect To Internet - Not Receiving Packets

May 12, 2011

I cant connect to the internet. When I use other networks its fine. Also all the computers in this network im trying to connect to can connect and work perfect. I know i have the WPA code right. Its sending but not recieving any packages. The IP address so i know its not working right.

View 14 Replies View Related

Wifi Connected But Not Receiving Packets?

Dec 17, 2012

I recently moved house and got a new ISP. I followed their instructions and set up my broadband. connection is working fine through the LAN, and I can connect to the wifi on my phone but when I try to connect my laptop via wifi it says it's connected but I can't access the internet and it looks like it's sending packets but not receiving.

View 7 Replies View Related

LAN Server Stopped Receiving Connections

Mar 25, 2011

Yesterday none of the clients could access the server. I could VNC remotely to see that the server was running. On site I observed that the server can ping and VNC all the clients but while the clients can VNC to the server they cannot ping it, nor can they connect to it. I checked the router/firewall settings and nothing appears to have changed in the last 24 hours.

View 7 Replies View Related

Wrt54gx2 - Router Isn't Receiving Internet?

Oct 27, 2012

I have this new linksys wrt54gx2, my laptop connects to it, my modem LAN light comes on when its plugged into it via Ethernet cable . I can access my router settings.

View 19 Replies View Related

New Modem Hooked Up But Still Not Receiving Wifi

Mar 1, 2012

I received a new modem with wifi and I'm still not receiving wifi even though I've hooked it up. I think that it's not hooked up properly.

View 1 Replies View Related

Cisco :: Cucme Through Sip Trunk Not Receiving Calls From Landlines

Apr 9, 2013

I heard from customers calling into the office stating that they have experienced some issues with our prompts and the extension input, that it is not recognizing their input. Stating sometimes it does not work on their land line but once they call back on their cell phone it works. We in the office all had people from the outside call from a land line to our office to verify the issue but the calls went through. We are thinking that they may be dialing the wrong extensions.Has anyone had any issues with land lines having trouble calling in.I am running cucme connected to a sip trunk.

View 4 Replies View Related

Cisco :: Padding Bytes At L2 Layer In Receiving Station

Mar 28, 2013

I am blocked with the below doubt for my issue resolution. When a ethernet frame for eg:ARP Packet of minimum length (64 bytes) is received at the end station, will the L2 layer remove both FCS and extra padding bytes(18 padding bytes for ARP)? Or removal of the padding bytes is dependent on the implementation?

View 2 Replies View Related

Cisco 2100 - Data Not Sending Or Receiving From Modem?

Oct 26, 2012

I'm using Cisco 2100 cable modem. It worked fine until some time later where the Data Send & Receive LED's stopped blinking. A man came to check if the cable was the problem by replacing it, but it wasn't. He claims it might be related to the laptop. I have tried several times restarting it. (I'm using mobile broadband) I would really like fast rather than slow internet ( I was limited so now it's slow but free)

View 14 Replies View Related

Cisco :: WLC2412 - Clients Not Receiving DHCP Addresses?

Apr 10, 2012

I recently upgraded a clients WLC and they keep saying they are unable to get an IP address from the DHCP server.  It's a simple, flat network and here is what the logs are showing. 
*apfReceiveTask: Apr 11 13:37:25.477: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
*apfReceiveTask: Apr 11 13:37:17.278: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
*apfReceiveTask: Apr 11 13:37:05.880: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.
*apfReceiveTask: Apr 11 13:13:47.397: %SIM-3-DHCP_SERVER_NO_REPLY: sim_interface.c:1039 Failed to get DHCP response on interface 'management'. Marking interface dirty.


View 19 Replies View Related

Cisco AAA/Identity/Nac :: Secure ACS 5.3 - Receiving An Alarm Notification?

Jul 19, 2012

We are using version 5.3 with patch 5. Incremental and full backup are configured but every day we receive an alarm notification.

View 7 Replies View Related

Not Receiving Mail From One Person On Office Network

Oct 31, 2012

In Outlook 2003, I am receiving mail from all others on the office network except one person and wondering what I can check to fix this

View 5 Replies View Related

Packets Are Being Sent Whenever Receiving Slowing Download Speed?

Aug 6, 2011

Everything is fine except that whenever I am receiving packets, there is a corresponding upstream of packets which is subsequently slowing my download speed.I should be getting ~600kbps, but I am instead getting ~200kbps.The ratio of packets sent/received is almost 1:1.5, and of course when your upload bandwidth is being maxed it starts cutting your download speed.

View 3 Replies View Related

Internet Connection Is Continuously Transmitting And Receiving?

May 11, 2011

My internet connection is continuously transmitting and receiving, even when there is no application running! is there any way to find out what is being transmitted or received and how to reset the connection?

View 3 Replies View Related

Increasing Wifi Receiving Range On Laptop?

Apr 11, 2012

We frequently camp at campgrounds that offer free WiFi, but many campsites are on the fringe of receiving a signal. Is there anything I can add to my laptop to increase receiving range- ie usb adapter with antenna?

View 2 Replies View Related

Broadband :: LAN Not Receiving Data From The LQ-2090 Printer?

Nov 7, 2011

i have a problm in Epson LQ-2090 Dot Matrix Printer that is LAN Not receiving the data's .....Last time the same prblm came so i installed IP Add thn after 10day's again the same prblm repeating..... So can any one tel me the reason y it happen..... But i think LAN Memory power is gone.

View 1 Replies View Related

Cat5 From Computer Receiving Wireless Signal?

Jul 18, 2011

I have a computer that is directly connected to my internet broadband service via my router and modem. From that computer, by use of a router (of course), I have a wireless connection to another desktop computer in my home, about 90 feet away.From that remote wireless internet broadband connection, I'd like to connect to yet a third computer. That third computer will be 200 more feet away. I have a direct Cat5 wire from the wireless computer desktop to that point 200 feet away. I'm thinking of adding a computer at that point.So, that raises my question: Can a computer receiving a wireless signal, then relay or transmit that signal to another computer that is "hard wired" to it via a Cat5 wire?

View 8 Replies View Related

Default Gateway Not Available - Receiving But Not Sending Packets?

Feb 14, 2011

I have a laptop computer with windows 7 and im having trouble connecting to my wireless internet. It says that im receiving packets but not sending them. I have tried to troubleshoot the problem and it says that the default gateway is not available. I am not sure what is happening with it, it started having problems while at a starbucks, and now the wireless and the LAN is not working on it.

View 13 Replies View Related

Receiving More Packets Than Sending In Vista Home?

Sep 27, 2012

Receiving more packets than sending in Vista Home?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: Acs Is Not Receiving Tacacs Requests From Juniper SSG140

Dec 11, 2011

I have configured ACS 5.1 and using Tacacs. I have two juniper SSG140 FW's in different subnet. Tacacs authentication is working on one SSG140 FW, but not on the other one. Tacacs configuration on both FW's are exactly the same. Both FW's have been added in the ACS server with the same shared secret key same profile etc. I don't even see the authentication requests from the FW. ACS can ping both FW's and vice versa. [code]

View 2 Replies View Related

Cisco Application :: SNMP Server Not Receiving Traps From ACE 4710

May 24, 2012

Had setup my ACE ,to send traps to SNMP server .but dont see any logs on the SNMP server from ACE.
SNMP configuration on ACE 
logging enable
logging buffered 6
logging host udp/514


View 1 Replies View Related

Copyrights 2005-15, All rights reserved