Cisco Wireless :: 1140 LWAPP / Local Bridge On Controller AP?

Sep 5, 2011

I have a Cisco controller WLAN solution where I want to bridge traffic locally on a remote site, when using Cisco 1140 LWAPP.Is the only way H-REAP ?

View 3 Replies


ADVERTISEMENT

Cisco Wireless :: 1242 LWAPP AP Mode Bridge

Jul 27, 2011

I try to change the AP mode of my LWAPP 1242 from local to bridge mode. But when the AP reboots it never associates with the controller, i have to reset it manually.I have the same issue with a LWAPP 1142.I tried to modify the AP mode configuration through the controller CLI but it's the same behaviour, AP never associates.Is there any particular parameter or configuration to perform before changing AP mode?

View 3 Replies View Related

Cisco Wireless :: Does 526 Controller Use LWAPP Protocol

Dec 3, 2008

Can the AIR-WLC526-K9 be used for any other access points besides the AIR-LAP521G-A-K9 access points? Does the 526 controller use the LWAPP protocol?

View 3 Replies View Related

Cisco Wireless :: 819 Work Group Bridge Through LWAPP Network

Jan 21, 2013

We are connecting a cisco router (819)  to wireless lan network (lwapp) through its wireless interface.
 
clients ---> 819 ---->AP (WGB) ------ lwapp ----- AP ---> LAN ---> servers.

since the clients are on the same subnet as the the VLAN on the lwapp, everything works great.When we add a new L3 VLAN on the 819 router, and we try to ping the clients from the servers, the packets can reach the clients but never received by the servers back. it seems like the bridge is dropping the packets when they go back from the client to the servers.when we use a GRE tunnel from the 819 to the LAN, everything works great.

View 3 Replies View Related

Cisco Wireless :: Connect 1130 Lwapp To Controller In DMZ?

Aug 5, 2012

i have lwapp 1130 in internal network , i already configure dhcp with option 43, in my switch connected to ap i set vlan 1424 for management AP and the ap got ip addres from dhcp server. The wlc controller is in DMZ with ip 10.222.5.3, from switch connected to ap i can ping 10.222.5.3 , it aslo seperated by cisco asa firewall, i already set allow from 0.0.0.0 to 10.222.5.3 udp port 5246-5247 and 12222-12223.

View 4 Replies View Related

Cisco :: 1140 APs - No Ping To Host From Local LAN

Apr 3, 2013

I'm using 3 AP's 1140 with local authentication using local radius (flex connect mode).the radius server im using is MS 2008 R2.authentication is working great on all devices pc's&mobile.authentication method is PEAP wpa2 aes enterprise.after 3 or 4 hours devices loose connectivity to the web.the device seems to be still connected to the ap but there is no ping to host from local lan or any arp learnd on local router.only manual disconnect on device and reconnecting brings connectivity up again.in one case only reseting the AP's worked.

View 6 Replies View Related

Can't Bridge Wireless To Local Area Connection?

Jul 23, 2011

I am trying to set up a wifi hotspot with my wireless adaptor. The connection between my ipod and the wireless adaptor in my computer seems to be working fine, but it doesn't connect further to the local area connection (ethernet).I tried to bridge the two networks but it doesn't work I get the error message "An unexpected error occurred while configuring the network bridge"[CODE]

View 4 Replies View Related

Cisco :: Test Fast Roaming Using A Cisco 2100 Series Controller And 2 1140 APs?

Jul 20, 2011

I'm trying to test fast roaming using a Cisco 2100 Series controller and 2 1140 APs. The initial authentication succeeds fine and the wireless connection works ok using WPA2+CCKM and LEAP with a Cisco ACS radius server.The problem is that the client does not attempt to preauthenticate with the other AP because the RSN Capabilities IE in the AP beacons and probe responses do not set the RSN Preauthentication capable bit. I can't figure out what it takes to get the APs to indicate to clients that it can do preauthentication. I'm been crawling through all the documentation I can find, to no avail.

View 1 Replies View Related

Cisco Wireless :: 4402 WLC Management / Local Controller Versus Cloud

Feb 26, 2013

We are currently looking to upgrade (re-design) our wireless network at our college. Any experience going from a local, controller-based wireless network to a cloud-based controller? If so, what have you found the pros and cons to be?
 
If you thought about going to a “cloud solution”, what stopped you?
 
We are currently running wireless at our 3 primary campus locations, and looking to add it to our 3 satellite locations. We use 4402 WLCs at our primary locations with a mix of 1140 and 1240 APs.

View 5 Replies View Related

Cisco :: No Dhcp Through Wireless Controller WLC2100 And Wireless Bridge WET546

Jan 19, 2011

Due to lack of wires we decided to extend our network by using WET546 bridge by linksys. Ideally we looking to create topology like this:
 
(Computer)--eth--(WET546)---wireless----(AP/WLC2100)---(router)---(Internet)
 
WET546 successfully authenticates and looks pretty healthy on controller (see below) , however neither of computers plugged to WET546 was unable to obtain ip address from dhcp server , nor working with static ip. I was under impression what it might be related to some default policies on WLC2100. Logs (warning) on WLC2100 looks clean.

View 8 Replies View Related

Cisco :: 1310 Bridge - Transparent To Local WEP Traffic?

Aug 10, 2011

we have a 1310 connecting two buildings networks.inside each building we have a wireless network (Intermec access points).we are implementing WEP on the Intermec AP's.will the cisco 1310 allow the wep traffic without interference? or would i need to modify the 1310 somehow?

View 2 Replies View Related

Domain Controller - Local Network Not Working?

May 4, 2011

we have using 10 system with domain contorller connected to network once disconnect server i cant acces to local systen ( per to per )

View 1 Replies View Related

Cisco Wireless :: Converting 1242ag To And From LWAPP

Apr 5, 2013

is this possible, i need to convert a 1242AG Autonomous back and forth this weekend to use for a quick project for testing.  i need to do: take the AP into LWAPP mode (i know how to do this with the aironet utility)  take the ap from LWAPP back into a AP mode so i can use it as my access point again. [code]

View 3 Replies View Related

Cisco Wireless :: Upgrading A 1242 AP From IOS To LWAPP

Sep 12, 2011

I am trying to upgrade an autonomous IOS 1242 AP to LWAPP and I am having an issue with finding the right code to complete the upgrade.  I have upgraded the AP to c1240-rcvk9w8-tar.124-21a.ja2.tar, but now I think I need a JX version of code to have it join a controller, and I can't find this anywhere on the Cisco site. 

View 5 Replies View Related

Cisco Wireless :: Converting 1040N Autonomous AP To LWAPP

Oct 5, 2011

I have a couple of 1040N autonomous APs want to convert to light weight APs.

View 8 Replies View Related

Cisco Wireless :: C1240 LWAPP Software Differences?

Oct 15, 2012

What is the difference between WIRELESS LAN LWAPP and WIRELESS LAN LWAP RECOVERY images?  I believe the RECOVERY is used in the upgade process - but what is the other used for? 

View 1 Replies View Related

Cisco Wireless :: AP-1041N LWAPP Reboot In Loop

Jan 24, 2012

We have a few AIR-LAP1041N-E-K9 and 2106 controller. One of the 1041N began rebooting in a loop. All over AP work fine. This morning, AP normally loaded at once. Two hours later, after AP reboot, situation repeated itself. Output from console:
 
 using  eeprom values
WRDTR,CLKTR: 0x85000800 0xc0000000
RQDC ,RFDC : 0x80000037 0x0000018c

[Code].....

View 4 Replies View Related

Cisco Wireless :: Downgrade AIR-LAP1142N-A-K9 LWAPP To Autonomous

Nov 14, 2012

I would like to downgrade Cisco Aironet 1142N to autonomous. But I would like to know is there any way to download the LWAPP IOS before upload the Autonomous IOS ? because I want to upgrade the 1142N from autonomous to LWAPP when I buy a LAN Controller.
 
Is that possible to use that backedup LWAPP IOS when I want to upgrade the Cisco Aironet 1142N autonomous to LWAPP?

View 8 Replies View Related

Cisco Wireless :: LWAPP 1242 Radio 0 Shows Down

Jan 14, 2012

I have cisco LWAPP 1242 AP already joined controller but 802.11b/g shows down on the radio 0 interface. I tried to enable it but it comes with an error" Error in enabling admin status". I have resetted the AP to factory default settings and even replaced with NEW AP.

View 3 Replies View Related

Cisco Wireless :: 5500 / Restart LWAPP Which Is Up For 200 Days?

Jan 29, 2013

I am running big wireless network, with 20no of 5500 with 7.0.116.0 version. I have more than 20,000 AP's. All LWAPP which are up for more than 200-300 days has to be rebooted, this problem is with all AP's. clients are not getting connected,after reboot they work fine.how do the same from ncs.

View 5 Replies View Related

Cisco Wireless :: Upgrading 1252s From Autonomous To LWAPP

May 22, 2012

I need to upgrade several 1252s from autonomous to LWAPP. I have not been able to find the upgrade tool for 1250s or instructions for CLI upgrade. I wil be using NCS to do final configuration once the APs come online.

View 1 Replies View Related

Cisco Wireless :: AIR-AP1252AG Autonomous AP Can Be Changed To LWAPP AP

Aug 25, 2011

I would like to know  AIR-AP1252AG-A-K9 (Autonomous AP) can be changed to LWAPP AP by changing IOS image??

View 1 Replies View Related

Cisco Wireless :: Converting AIR-SAP2602i-s-k9 From Autonomous To LWAPP

Feb 26, 2013

I need your expertise regarding how to convert from autonomous to LWAPP using AIR-SAP2602i-s-k9 with IOS version of ap3g2-k9w7-xx.152.-2.JA.
 
I'm following these commands but it is not available
 
debug capwap console cli or debug lwapp console cli
   
I cannot proceed to convert it Did I miss something or the 2600 series doesn't support LWAPP convertion ?

View 2 Replies View Related

Cisco Wireless :: Aironet 1250 LWAPP To Autonomous Downgrade?

Aug 25, 2010

upgraded my home AP from Autonomous to Lwapp.  I was an Idiot and thought i was getting an IOS upgrade. I need to revert it back to autonomous and a simple "mode" button reset doesnt work.  I read that I need to Reload original IOS software, but It appears I cant get it without a support contract.  I cant afford servicenet and need to obtain old ios to revert to factory default 12.4(10b)JA1.  Do I need a contract to roll back?  Is there an archive (backup image) of the old IOS that could be still stored on the device.  I didnt back it up and need to obtain the image.

View 5 Replies View Related

Cisco Wireless :: Lwapp 1242ag Doesn't Show Mesh

Oct 10, 2011

I'm using a wlan controller with 1242ag converted to lwapp, i'm trying to enable 5.8 but when i change the from local to bridge the lwapp disappear from controller. May be that the firmware does not support mesh !I'm following the 4402 wlan manual at page 641.

View 5 Replies View Related

Cisco Wireless :: How To Convert AIR-AP1041N (autonomous) To AIR-LAP1041N (lwapp)

Sep 11, 2011

some days ago I succesfully converted  AIR-LAP1041N (lwapp) to AIR-AP1041N (autonomus).I used  c1140-k9w7-tar.124-25d.JA1.tar which is available to download in Download Software Section for this AP.But there are any autonomus to lightweigt firmware for this AP.I tried to use  c1140-rcvk9w8-tar. 124- 21a.JA2.tar for 1140 but AP hungs after that. How can i back to LWAPP version in 1041?

View 7 Replies View Related

Cisco Wireless :: Lwapp 1130 - Error / Command Is Disabled

Jan 21, 2012

I have a lwapp 1130 here and it's no longer associated with the controller.  I issued the clear lwapp private-config, it went through and cleared the config.  Now when I try to issue the lwapp commands to set the ip and such i get ERROR!!! Command is disabled. I read that this means the static configuration is locked, but it did not say how to "unlock" it.  how to get this re-enabled.

View 31 Replies View Related

Cisco Wireless :: Converting 881W From LWAPP To Autonomous Mode

Aug 19, 2010

I was trying to upgrade the IOS image of the AP and I did a wrong manip.
 
I downloaded the IOS image (ap801-rcvk9w8-tar.124-10b.JA3.tar) from my TFTP server to the flash of the AP. Everything went find so far. But than I did an archive archive download-sw /overwrite ap801-rcvk9w8-tar.124-10b.JA3.tar and my AP reboot in LWAPP mode.
 
I should have done: archive download-sw /overwrite tftp://10.0.0.1/ ap801-rcvk9w8-tar.124-10b.JA3.tar instead!
 
Now I don't how to go back to autonomous mode. archive commando is not available anymore in LWAPP mode.

View 4 Replies View Related

Cisco Wireless :: WLC 5508 - AP LWAPP With 2 SSID / DHCP Differences?

Jul 22, 2012

I need raise a especial configuration to 34 APs LWAPP associated to WLC 5508 with IOS 7.0.220
 
This is the Scenario:We have 34 APs LWAPP with 2 SSID (Corporative & Guest), with 2 DHCP different. The Guest SSID receive IP to DHCP from WLC while SSID Corporative receive IP from Microsoft DHCP. The AP On Site are Local and the Foreign AP are configured like H-REAP (H-REAP Local switching and Learn Client IP Address are marked)
 
Here is the thing, I need configure a new WLAN (Pruebas) for add to 34 APs (Local and Foreign) but this new WLAN must be receive IP from a New Microsoft DHCP
 
Firstly I configured a new Physical interface and linked to New WLAN (Pruebas) however i don't know how configure the AP and the DHCP because I want that the AP deliver IP addresses depending the Locality.The last because the SuperScope from DHCP is divided in various subnets and because the IP from the AP will be in another VLAN

View 3 Replies View Related

Cisco Wireless :: 5508 - Lwapp Capwap Technology Clarifications

Jul 10, 2012

Clarify some points with capwap implementation, does all data and control traffic tunneled back to the controller and switching packets to the specific vlan will be done by the controller? so if i have 5508 controller, its maximum throughput will be 8 gbps (local mode AP), provided i have done LAG on all its ports to the LAN switch?

View 2 Replies View Related

Cisco Wireless :: LWAPP Mode To Autonomous Conversion Aironet 1262

Mar 13, 2013

we have 1262 (AIR-LAP1262N-E-K9) and we dont have WLC..and i want to convert it to Autonomous mode..i did the below steps... with using this file  (ap3g1-k9w7-tar.152-2.JB.tar) download it from Cisco site. Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30. Step 2 Make  sure that the PC contains the access point image file (such as  c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP  server folder and that the TFTP server is activated. Step 3 Set the timeout value on the TFTP server to 30 seconds. Step 4 On the PC where the TFTP server is located, perform these steps.

View 48 Replies View Related

Cisco Wireless :: 7500 LAP Won't Join WLC / Lwapp Discovery Request Rejected

Sep 20, 2011

We are setting up a WLC 7500 for the first time and are having a hard time trying to connect an LAP to the WLC. We have 1042 Access Points.Reason for last unsucessful attempt: to many concurrent ap image downloads
 
-Last Error Occurred: Lwapp discovery request rejected
-Last Error Occurred Reason: Too many concurrent AP image downloads
 
We only have 1 AP plugged in so far and it does recieve an IP address from DHCP.

View 15 Replies View Related

Cisco Wireless :: AIR-AP1242AG-E-K9 Unable To Join WLC 2504 After Upgrade To LWAPP

Sep 10, 2012

I have a few AIR-AP1242-E-K9 AP that I have upgraded to LWAPP, after the upgrade the AP's don't join the controller. But some AIR-AP1232AG-E-K9 on the same site joins without any issues.The controller is: AIR-CT2504-K9, SW: 7.0.220.0. [code]

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved