Cisco Wireless :: AP1142N Doesn't Join WLC (5508)
Dec 27, 2012
My APs 1142N don't join their WLC. APs and WLC management interface are in the same vlan (WLC can ping all the APs). It is strange because it doesn't seem like they are trying to contact the WLC. What's strange is that I have other AP 1142N which joined this WLC without any problem.
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
[Code].....
View 4 Replies
ADVERTISEMENT
Apr 25, 2011
today i upgraded our WLC4402 from 7.0.98.0 to 7.0.116.0. After the upgrade (also bootloader upgrade) the Aironet 1142 AP's do not joint the controller anymore. Error in log:*spamReceiveTask: Apr 26 11:30:46.301: %CAPWAP-3-DISC_INTF_ERR2: capwap_ac_sm.c:1468 Ignoring Primary discovery request received on a wrong VLAN (21) on interface (29) from AP ec:c8:82:ab:ed:00 Nothing changed in infrastructure. AP's are in VLAN 21, AP-Manager interface is in VLAN 21. Ap-Manager, Management Interface and Dynamic Interfaces are in PortChannel (LAG) = Interface 29.
View 8 Replies
View Related
Oct 1, 2012
Converted a Cisco 1231 with the Update Tool to lightweight (used c1200-rcvk9w8-tar.124-21a.JA2.tar). It worked, but now the AP issn't joining the wlc: [code]
View 8 Replies
View Related
Mar 16, 2013
I have a cisco 5508 WLC and 40 cisco 360021 APs.I configured the WLC and assign the management interface IP and also configured a DHCP pool on my Cisco 4507 core switch wit option 43.But the problem that the APs connot join the WLC.
View 31 Replies
View Related
Nov 14, 2012
A customer runs a 5508 WLC for quit a while. several dozens AP's are spread all over Europe an run just fine. All the AP's have a VPN based connection over an MPLS service provider, so we are using 10.x.x.x addresses only. We have upgraded to release 7.2.111.3 to support OEAP 600 and we have configured NAT in the Firewall as well a policy to support the home office AP. Everything works fine until the switch where the WLC was attached to crushed. From this moment on, all internal AP's ar no longer able to register at the WLC. A log at the console port on an AP shows that it tries to access the external (NAT) IP address. We had to remove the NAT flag to support the internal AP's.
View 3 Replies
View Related
Sep 25, 2012
I have a 3502i(AP_1) that will not join a 5508 WLC(WLC_1)(code 7.2.103). The 3502i(AP_1) will join 4402 WLC(WLC_2)(Code 7.0.230). I have another 3502i(AP_2) that will join the WLC_1 & WLC_2. I am using capwap discover through DNS and hard coding the primiary WLC to AP_1 & AP_2. When I debug capwap events and errors, I see the static capwap messages and replies. Both of the WLC are on the same subnet. I have defauted the AP_1 and it joins the CISCO-CAPWAP-CONTROLLER as expected. When I change the Primiary WLC to WLC_1 it goes back to the CISCO-CAPWAP-CONTROLLER. If i change the primiary WLC to WLC_2 it joins. If I change the primiary back to WLC_1 it joins WLC_2 even though it is not a secondary. I know the previous joined WLC are stored in NVRAM, so that might be why it is doing that. I can join other ap to WLC_1 just not this one.
[code]....
View 4 Replies
View Related
May 13, 2012
I just have a brand new Aironet 1552E , just took it out of the box and connect to the same subnet with a WLC 5508 v7.2 fully config and working However, it could not join the WLC 5508.
View 4 Replies
View Related
Jun 20, 2012
I have a facility, where all the access points almost 250 of them are connected to two WisM's (One in each core switch ) . They are running in 6.0.199 firmware . These two WisM's are managed by WCS , which is running 6.0.188.
As i need to add more access points and to make fully redundant , 5500 controller was ordered and it has with firmware 7.0 installed. Couple of queries related with it .
1. Can 5500 be added in the WLC group, so that existing Access Points can be configured to use primary controller as 5500 and secondary / tertiary controller as WISM ?
2. Will 5500 be able to be detected by WCS , as the version of 5500 is 7.0 and WCS version is 6.0.188 ?
3. As WCS was already deployed and live, is it possible to upgrade, if the client has support contract like SUSA ?
View 4 Replies
View Related
Mar 11, 2012
We have bought autonomous APs AIR-AP1141N-E-K9 and converted them to the lightweight mode, but they cannot join the WLC 5508. The errors are below. There were NO problems with the LAPs that were bought before, together with the
WLC.AP's IP: 172.22.90.27 IOS version 12.4
WLC's IP: 172.22.90.20 IOS version 6.0.188.0
logs from the AP:
Translating "CISCO-LWAPP-CONTROLLER"...domain server (255.255.255.255)
*Oct 13 21:37:06.044: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Oct 13 21:37:06.045: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Oct 13 21:37:06.046: bsnInitRcbSlot: slot 1 has NO radio
[Code] .....
The time is set to the WLC with the NTP. Don't lookup at the time the logs were made - they were made not during the same day/time
View 6 Replies
View Related
Jan 10, 2013
I have an (AIR-LAP1310G-E-K9R) and I tried to join it to WLC 5508 but I'm facing an error, I get this error from the LAP 1310 console as below:
Compiled Mon 17-Jul-06 11:45 by alnguyen
*Mar 1 00:00:05.289: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:06.289: %LINEPROTO-5-UPDOWN: Line protocol on Interface
[Code].....
View 11 Replies
View Related
Oct 14, 2012
i have configured cisco LAP1240 in H-Reap Mode for multiple branch offices with Local switching and central authentication. one of the branch's AP does not join the controller in HQ while the others are all ok. i have firewall only in HQ, i did priming first for all APs like let them join the controller and configure controller IP in high availbility, and H-Reap config and assign SSID to map with the branch local vlan. when i faced this issue first time i brought back ap and configure a static IP address for AP than recheck them again but the problem still same. since i have only one firewall in the network and also other branches joined the controller through that firewall and no issues.
View 3 Replies
View Related
Nov 26, 2012
I have problems with an AP AIR-CAP1552C-E-K9 (MAC: 2c:36:f8:73:e8:a0 )this AP cannot join to WLC 5508 software version 7.2.110.0.The AP ever gets associated to WLC.
I saw timeout messages and this error message:
%CAPWAP-3-ECHO_ERR: capwap_ac_sm.c:5656 Did not receive heartbeat reply; AP: 2c:36:f8:73:e8:a0
I don´t see any connectivity issues between the AP and WLC thorugh HFC network.One time the AP join to WLC and I saw this messages in debug CAPWAP:
*spamApTask1: Nov 27 09:01:06.316: 2c:36:f8:73:e8:a0 Change State Event Response sent to 10.64.128.165:16012
*spamApTask1: Nov 27 09:01:06.316: 2c:36:f8:73:e8:a0 CAPWAP State: Run
*spamApTask1: Nov 27 09:01:06.316: 2c:36:f8:73:e8:a0 Sending the remaining config to AP 10.64.128.165:16012
[code].....
View 2 Replies
View Related
Nov 6, 2012
output are here
*Mar 1 01:28:21.018: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 01:28:21.022: %LWAPP-3-CLIENTERRORLOG: bsnSetCurrentBHRate : fail to set
radio control and data rate
*Mar 1 01:28:21.179: %CDP_PD-2-POWER_LOW: All radios disabled - AC_ADAPTOR (00
00.0000.0000)
*Mar 1 01:28:21.984: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
*Mar 1 01:28:34.341: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 192.168.10.244, mask 255.255.255.0, hostname AP2c54.2d0d.c3c4
View 1 Replies
View Related
May 1, 2012
I have a WLC 5508, AIR-LAP1142N APs and a SSID for students to connect to who bring their own device. I am still testing this and it has not been rolled out but I am running into some serious issues with joining the network. I am authenticating them through a RADIUS server (2008 R2). Problem: many of them cannot connect because they are lacking the certificate.
1. What is a good setup for authentication in a BYOD environment
2. If my setup is good what can I do to allow kids to use their computers on the wireless either without the certificate (which I know is unlikely) or what do I need to have them do to connect. I am hoping it does not involve hard wiring and getting the certificate from the server.
View 1 Replies
View Related
Mar 13, 2011
I've been trying to get it to work all day.When I open up Hamachi it shows the main screen with two buttons. Create a new network and Join an existing network.I've tried both but when I click create or join it doesn't do anything. Like it actually does nothing at all.Doesn't even close the window.Everything stays open and it doesn't either create or join any networks.
View 1 Replies
View Related
Sep 12, 2012
i'am trying to configure an AP1121g on my controller wlc5508 7.2 but i'am facing a compatibility issue.
View 5 Replies
View Related
Oct 15, 2012
I have question about compatibility. I had set up two Cisco AP AIR-AP1131AG-E-KP. They are set under one SSID whith clients roaming between them. I want to add one or two new APs. I would like to use AIR-AP1142N-E-K9. Are they compatible? Are there any issuess using these two types together?
View 2 Replies
View Related
Sep 28, 2012
We are Deploying New Stand Alone AP (Model:AIR-AP1142N-N-K9) in our infrastrucuture, through out our network, we used 802.11G Adapter for Wifi Clients throughout,
Coulple of Questions i Have,
1) In This New Access point i found only Radio0 -802.11N 2.4 Ghz & 5 Ghz , whether this Model AIR-AP1142N-N-K9 will Support 802.11G Adapters?
2) if Clients Comes up with 802.11 G Adapter will it Negotiate and Connect to it?, through out worldwide our network Wifi Clients used 802.11g network to Connect to wifi Network.
3) Also from Client PC is there a way to find what network adapter its running?
4) Correct me if i am wrong , if Client Laptops having G adapter, i Hope it will not Connect To Access point with N Adapter?
5) if these Access point Does not support G adapter, any way to upgrade or downgrade to other IOS to make this access point support G Adapters?
View 4 Replies
View Related
Apr 12, 2012
We have an 2504 wireless controller at the office with 5 LAP1142's. At another office we have a single AP1142 which doesn’t quite reach end to end. Ideally I want drop in another AP1142 to provide end to end coverage. Does AP1142 has a repeater mode? If not is there any way to make two AP1142's work with each other so they appear as a singular access point? Can they be configured to handle roaming?
View 1 Replies
View Related
Mar 17, 2013
We hav ea 5508 pair running in HA mode. Initially the conrollers were running the 73..101.0 code. We were having issues where the primary controller would software reset (according to show sysinfo), the secondary (HA SKU) would take over and then after a few hours the secondary would also software reset and the primary would take over. Also I notice that after this happens that the Tx Power Control doesn't seem to adjust the A radio settings, most of the radios are at the 6 level. Normally they are 1, 2, or 3. Last week I upgraded to 7.3.112.0, later that day the same thing happened.
View 1 Replies
View Related
May 21, 2012
is there any issue in buying air-ap1142n-ek9 802.11A/G/N FIXED AUTO AP INT ANT and later on converting it into lightweight under the control of air-ct2504-15k9 2504 WIRELESS CONTROLLER WITH 15 AP LICENSES ?Are there any requirements on the SW of the WLC and the IOS of the AP? The reason of the choice is budget.
View 1 Replies
View Related
May 20, 2012
just i have purchased new cisco air-ap1142n-a-k9 wireless access point, trying to configure the wpa2 configuration for security reason, but unable to configure in any security mode. So currently my AP is working no security / encryption mode.
View 16 Replies
View Related
Nov 26, 2012
I've got an AIR-AP1142N-E-K9 access point, i've got the Radio0-802.11n(2.4ghz) enabled and the 5.0ghz disabled.
i've got my client real close to the AP and i only get a connection speed of 72Mbs.
Shouldn't i get 150mbs? Maybe some wrong configuration?
View 14 Replies
View Related
Jan 17, 2012
I was trying to do a password recovery on a 1142 AP but enable password did not reset and I am stuck
AP model is AIR-AP1142N-A-K9
Running IOS c1140-k9w7-mx.124-21a.JA1
Its autonomous so there is no controller. I renamed the config.txt file I am unable to rename or delete the private-config file. I get the message that file or directory cannot be found when i try to rename and permission denied when I try to delete it.
View 12 Replies
View Related
May 13, 2012
I installed two AIR-AP1142N-E-K9 access points, running a fairly simple config, WPA2 PSK, with AES cipher, both the same SSID.The two access points are connected to Cisco 2960G switches, which are in turn connected to each other, again without any fancy config options, no VLAN's ed.
After a random while, varying from 30 minutes to 15 hours, the access points will stop sending/recieving traffic on the ethernet interface.The units don't stop at the same moment, this also varies seemingly random. It's not related to load or the amount of clients (1 to 15).Only turning on one unit doesn't make any difference.
The units keep sending out their SSID, you can associate to them, but the DHCP requests aren't passed on to the DHCP server which is connected to one of the 2960G's.If you wirelessly connect to the AP and set a manual IP adress you can reach the webinterface and telnet/ssh to the access point. The ethernet link is reported as being up on the access point. Also the switch reports a link on the port to which the access point is connected.Resetting the link does have no effect. The log doesn't mention any errors or warnings.Power cycling or reloading the access point will put it back in working order for a varying amount of time.
Access point version:
Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(21a)JA1, RELEASE SOFTWARE (fc1)
Access point config:
!
! Last configuration change at 14:41:40 +0100 Sat May 12 2012 by admin
! NVRAM config last updated at 14:41:40 +0100 Sat May 12 2012 by admin
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
[code]...
View 13 Replies
View Related
May 26, 2013
We are having issue with all our Cicso wireless devices (AIR-AP1142N-N-K9) when connected to Windows 8 Pro users. When copying large files, the connection changes to limited access. The initial connection to the access points is also slow for both windows 7 and windows 8 pcs.
View 3 Replies
View Related
Oct 14, 2012
I would like to have a support on AIR-AP1142N-E-K9 configurations.How I can config this AP?
View 1 Replies
View Related
Dec 13, 2012
I currenly have a cisco AP1142N configured to work with our radius server (It was already configured when I took over the network). I order two additional access points for building coverage on multiple floors. Currently, I uploaded the config of the orginal access point to the new device and I can access the device via web and the ssid is being broadcasted. I then added in the access point into IAS with the radius secret key to our Radius server. When I go to connec to the new access point w/ domain credentials I am not able to establish a connection. I am not very familiar with CISCO products. I followed a video to get the access point up and running w/ an IP from CLI so I could access the web interface and upload the edited config.txt file. Are there any issues with setting up multiple access points w/ a single windows radius (IAS) server?
View 7 Replies
View Related
May 16, 2013
I am new to Cisco wireless solution and would like to ask how to add the AP to the WLC properly. All Cisco 1041 and Cisco 2500 WLC are new. I connect those AP and WLC to the switch without any VLAN tag and the AP can gain the IP address from our DHCP correctly. However, the AP 1041 could not join the WLC successfully.
WLC: Cisco 2500
IP Address: 192.168.1.225
version: 7.4.100.0
View 5 Replies
View Related
Mar 24, 2013
Our offcie use WLC2100 Series controller with AIR-LAP1031 and successfully join and running. Now i am trying to replace one ap with AIR-LAP1041N and join with WLC, but i can't and below the error message generate:
[code]....
View 2 Replies
View Related
Jul 10, 2012
I am trying to set up a Wireless network a WLC hosted on an SRE module in a 2911 router. I think i have most of my bases covered but there is still one problem.
My LAP1131AG AP's won't join the controller, on the AP im am seeing this:
Translating "CISCO-LWAPP-CONTROLLER.test.local"...domain server (192.168.250.10) [OK]
[Code].....
But to my knowledge an LWAP AP schould be able to join a CAPWAP WLC
View 2 Replies
View Related
Apr 8, 2012
WLC software 7.2.103.0
1. first problem: AP1252 can´t join on WLC. MAC was add on mac filter properly.
170Mon Apr 9 15:37:32 2012Mesh Node '2c:3f:38:be:53:ef' failed to join controller, MAC address not in MAC filter list.171Mon Apr 9 15:37:32 2012AAA Authentication Failure for UserName:2c3f38be53e0 User Type: WLAN USER172Mon Apr 9 15:37:32 2012Coverage hole pre alarm for client[1] 40:a6:d9:ef:87:68 on 802.11b/g interface of AP 2c:3f:38:bf:0c:80 (AP2c3f.38bf.0c80). Hist: 46 7 5 4 2 1 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0173Mon Apr 9 15:37:32 2012Coverage hole pre alarm for client[1] 8c:7b:9d:05:a0:67 on 802.11b/g interface of AP 2c:3f:38:bf:0c:80 (AP2c3f.38bf.0c80). Hist: 50 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0174Mon Apr 9 15:37:30
[code]....
Several APs can´t join on WLC and all are added on MAC filter, but they are showing this messages.
2 . Second problem.: Operational Status = UNKNOWN
Some Access Point are in UNKNOWN status. I tried but I can´t do the reboot. I can access Web config the APs using WLC, but when I applied the reset, it wasn´t working properly.
View 2 Replies
View Related
Jun 10, 2013
I'm new in installing WIFI, I have WLC 2504 using 7.4.100.0. I have AP 1600 (AIR-CAP1602E-E-K9)
I installed the WLC and AP in a cisco poe switch, wlc and ap are in the same subnet and can ping ap from WLC, but the AP cannot join the wlc. i have this error message
(Cisco Controller) >show ap join stats detailed 00:06:f6:d6:03:f0
Sync phase statistics
- Time at sync request received............................ Not applicable
- Time at sync completed................................... Not applicable
View 15 Replies
View Related
