Cisco Wireless :: Configure 877W As Client?
Jan 3, 2010
I have a small CCENT/CCNA lab with a few switches and routers which I would like to connect to my D-link home router so that it can access the outside world. I have an 877W which I believe is supposed to be able to connect to a wifi network as a client.
I have seen reference to configuring a bridge but this is something outside of my current understanding. The idea is to have the 877W with it's wireless interface connected to my wireless network and the Lab connected to the 877's intergrated switch, using the 877 as a basic router connecting the two networks. I've scoured Google and put together a configuration using what I could find in forum posts and Cisco documentation. The D-link is set up for auto WPA/WPA2 Personal (TKIP or AES). I'm using an ASCII key with an update interval of 0. I've never had a problem with other devices trying to connecting to it.
At the moment the 877W seems to connect to the D-link but then lose it's association, from what I can see it looks like the 877 is trying to rotate the key? Once this happens my laptop loses it's wireless connection and I need to reboot the D-link to get it back. Interestingly the Windows 7 network icon shows three computers with a link between each as the network icon when this happens. It's as if the 877W acts as a Rogue access point and steals my client's connection. On one attempt the debug output showed the 877 geting an IP address from the D-link's DHCP so it does seem to connect initially.
Config and debug output are below.
Config:
!dot11 ssid MYSSIDauthentication openauthentication key-management wpainfrastructure-ssidwpa-psk ascii 7 MYWPAKEY
!interface Dot11Radio0ip address dhcpshutdown!encryption mode ciphers aes-ccm
[Code].....
View 2 Replies
ADVERTISEMENT
Oct 11, 2012
Ive been struggling with this issue for a week now with an 877w (now with andvanced ip ios) in short my wireless network consists of
The internal dot11 sibinterface 0.11 radio (IP Address 10.0.1.1) which on bridge group 1 (IP Address 10.0.0.10) The SSID for the radio is on vlan 11 which has no ip address.
This works i can ping the internal network and internet
The guest dot11 sibinterface 0.10 radio (IP Address 10.0.3.1) which on bridge group 2 (IP Address 10.0.2.1) The SSID for the radio is on vlan 10 which has no ip address.
This dosnt work i get no no recived packets on the clients network stats and i cant ping any name servers or the radio ip address.The client is listed as being successfully accosated with the show dot11 assoc commmand
Ive tried taking the guest wireless and creating a new vlan for it (so its not on the same vlan as the tmg firewall interface) so that i have only the dot11 radio and vlan 12 on brige group 2 but the same thing happens no traffic on the guest vlan.
Ive turned off all authentication while testing this and the wireless network is currently in open mode until its fixed ive also only configured whats neccessry to test the wireless connectivity (no radius etc) that will be added later, Im also not using dhcp yet and the client is configured to the apporprite adderess staticly ie 10.0.1.1 10.0.3.2 its not a dhcp issue
!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname Router!boot-start-markerboot-end-marker!logging message-counter syslog!aaa
[Code].....
View 4 Replies
View Related
Nov 25, 2011
We have dlink dir320 router and cisco 877W.
The goal is to make a 877W to work as a wireless client of dlink dir320 and brigde the LAN&WLAN so than the LAN clients of 877W could take DHCP from Dlink 320 directly.
Here's the config of 877w:
!
bridge irb
!
dot11 ssid DLINK_SSID
[Code].....
View 1 Replies
View Related
Nov 15, 2010
I'm configuring a Cisco 877 router as my firewall.My WAN IP will be assigned dynamically with DHCP. I will also get my default route from DHCP.I will need to configure ip inspection and packet filtering.I will need to configure NAT, I will eventually need to also configure a dial-up VPN.
View 7 Replies
View Related
Nov 19, 2012
Is there a way to configure a disclaimer that will pop up on the client machine that they will need to accept to be allowed access to the wireless network?
View 3 Replies
View Related
Sep 11, 2011
WAP4410N / configure dhcp OR dhcp CLIENT?
View 3 Replies
View Related
May 5, 2013
how to configure AP1522 in my possession.
I have 2 AP1522 and I have to configure them so that clients can connect either 2.4 GHz or 5.0 GHz. Each of the two AP1522 must be autonomous, but has to bear in mind that are close together.
To do this I have:
- Defined the two AP1522 as RAP mode
- Set the flag on the "client access on backhault link", but I have not enabled the sub-flag "Extended backhaul Client Access" (what is this sub-flag?)
- Set 2 BGN different (but this is indispensible or I can put the same BGN? what is the difference?)
- Set the two AP1522 on two different channels (but this is necessary? or is importan only if I set the same BGN?)
- The two AP1522 appear on the WLC as a way bidge (is correct?)
How can I check if my laptop will connect using the 5.0 GHz?!? It's just turn off the antenna of 2.4 GHz?!? On my laptop I haven't found a way to force it to connect in 5.0 GHz.
View 5 Replies
View Related
Jun 26, 2011
I'm trying to configure my Linksys E2000 to be an ethernet attached wireless device to use on computers instead of dongles, etc. I don't want it to route, just act like a Wireless card.
View 1 Replies
View Related
Dec 2, 2011
Connect my linksys WRT54GL router to the proxpn vpn privacy service as a client? (or any other vpn privacy service for that matter) I already have an internet connection up and live with a cisco router so I would need to connect the linksys to the cisco and use the linksys as a vpn gateway kind of thing, so that any computer connected to the linksys will automatically be in the vpn tunnel without needing any cleint software installed on it. The vpn service I use is proxpn but they won't support the settings of individual routers (understandable). The only setting they give for a PPTP connection is here
[url]...
View 3 Replies
View Related
Mar 20, 2013
Is there a way to configure a 28xx series router with a HWIC-AP card as a wireless client instead of a wireless access point? There isn't a network drop in the location that I need to place a router, but there is an active Access Point that reaches the area.
View 1 Replies
View Related
Feb 4, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version :
ISP :
I have an unused TD-W8151N. I also have a smart TV that requires a wired connection, with no way of getting a wire to it.
Can I configure my spare TD-W8151N as a client of the existing WiFi network and connect the TV in to the TD-W8151N with a cable?
View 2 Replies
View Related
Apr 12, 2012
I have a Cisco 877w (configuration shown below) and i am trying to use a Photo Transfer App on my iPhone4s and iPad3 which allows transfer of photos and videos between the devices using WiFi, the only thing is i cannot get my devices to communicate with each other and i suspect that this is to do with the configuration of my router as the app works perfectly using bluetooth but obviously a lot slower. I cannot even ping the devices from my pc which is also on the same WiFi network. How i should tweak my config?
View 2 Replies
View Related
Jul 6, 2012
I have a Cisco 877W router that has been running flawlessly for nearly 2 years. During that time I've never had to manually reset the router, it has been more reliable than my ISP.However one month ago I left my business for a week and came back to find that the WLAN was no longer visible from my laptop. I searched google, tech forums, and these forums for conclusive explanations as to what is happening but found nothing.The main issue is an inability to see the network, old wireless devices that have been using the WLAN for a while have no trouble viewing the network or connecting to it.How ever, any time a new device is brought in (Samsung Galaxy Tab, new Laptops, and new Desktops) the WLAN is not available.I was able to make the device visible to my laptop by changing the country code on my network device to Region 1, but this is not an option for all devices or configurations.
I have changed the broadcast channels, shutting down the WLAN, configuring WLAN differently (through several different Security methods).My separate access points are usually visible by all clients, (I use D-LINK wifi routers configured to AP mode throughout my facility) however the Cisco just doesn't like to be seen?
View 12 Replies
View Related
Apr 26, 2012
As part of site to site VPN configuration, I need to configure VPN server & Client using Cisco 877 only.
View 1 Replies
View Related
Apr 23, 2013
I did some searching and the answers said it was supposedly possible but no info on how to do it. I am wondering if it is possible to configure a Cisco ASA 5505/10/20 to be a client to an existing (in this case) cisco client vpn. The reasons why are complicated (and imo irrelevant) but basically I need to be able to make a small network that can be on this vpn rather than individual machines.The client vpn is a basic IPSec over UDP Cisco VPN to an ASA5505.So how would I configure another ASA to connect to this like its a client?
View 3 Replies
View Related
Mar 15, 2012
I'd like to configure a VPN with two SR520. the first router is a SR520-FE-K9 and it's at office, the second router is a SR520-ADSL-K9 and it's at home.
Each router have a static IP and individually works well. I tried to configure, by CCA, the office router as a server and the home router as a client: at home I can't see the office network and I can't navigate.
Need step by step, using CCA to configure a secure VPN.
View 1 Replies
View Related
May 22, 2012
I configure Easy vpn on ASA 5510. it is working everything is ok. How can i configure vpn client without username and password?
View 1 Replies
View Related
May 22, 2012
I configure Easy vpn on ASA 5510. it is working everything is ok. How can i configure vpn client without username and password?
View 1 Replies
View Related
Apr 28, 2011
So I have three ASA 5505 firewall. my firewalls we are in the test environment. I read on the net that when you have a situation like in my company where are headquarter and two offices, i should put in each branch office and headquarter one asa firewall and a firewalls should be configured as easyvpn.
VPN server is in headquarter and easyvpn's are in branch offices. i tried everything, but we could not configure them. maybe it's not a problem that in my test environment at my the external interfaces which have static addresses on these three firewalls, respectively serever 192.168.2.1, 192.168.2.2 and 192.168.2.3 client client. I seted firewalls by following the instructions, but does not work
[URL]...
I solved the problem with the server as a remote access VPN. client workstations that are on the 192.168.2.0/24 network can access a local LAN via VPN. But when you put the ASA 5505 firewall. clients on the LAN side of the firewall can not access the VPN. I use software products Cisco VPN Client 5.0.06, but when I create a connection and try to connect to get an error secure vpn connection terminated locally by the client. reason 412: the remote peer is no longer responding.
View 2 Replies
View Related
Jul 5, 2011
I need to configure our ASA5505 firewall for remote access to our network using EasyVPN software installed on a laptop. That laptop will be connected in the different places, using DSL or 3G toggle or Public Wi-Fi. For some people it's very easy, but I don't have any experience with firewalls.
View 9 Replies
View Related
Aug 13, 2011
i am trying to configure static ip on remote client user side , i am using the following doc as an example but i am not getting the ip which i am mentiong in the user .[url]...
View 10 Replies
View Related
Feb 7, 2011
Is it possible to configure split tunneling for default Windows VPN Client and ASA 8.0? Everything works fine with Cisco VPN Client
View 3 Replies
View Related
Apr 9, 2013
How to configure hsrp in my client location.They have 1 no of router and 2 no of 3750 switch.they need to configure Hsrp in switch.
View 5 Replies
View Related
Jan 31, 2011
How can I configure an ASA 5505 NEM client to allow access to the Internet when the tunnel to the headend is down? I am planning on deploying back to back ASA 5505s in network extension mode but I do not want to block Internet access on the client side if the tunnel to the server should go down.
View 4 Replies
View Related
Oct 9, 2012
I am trying to configure RV082 router with Mac Native VPN Client for my remote access. However, no matter what I did, I am not able to make it works. Can any one can give me an example of how to conguration my RV082 router and Mac Book Pro(Mountain Lion)?
View 2 Replies
View Related
Jul 30, 2012
How to configure cisco 3560 to force the client only can get ip by dhcp-relay server ?
The company i am working in has 5 vlans which have been set an lay-3 switch(3560), uses the dhcp-relay server .(in svi configuration: ip helper-address X.X.X.X) well , that works ok~
Now , I got my problem: I need to force the client only can get ip by dhcp-relay server, that means if anyone set static IP manunally , he can't really access to anywhere (to provent anyone set static IP with malignancy )
I know if a h3c router , how to set this configuration n svi configuration : dhcp relay security address-check enable )
the how to configure on a cisco 3560 ?
View 1 Replies
View Related
Jun 16, 2011
Configuring QoS on my cisco877W for VoIP below is the current config. [code]
View 3 Replies
View Related
May 15, 2013
how to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
View 1 Replies
View Related
Dec 16, 2011
Cisco 877W. I configured it for PPPoE. But once I plug in the ADSL line, the dialer interface will get IP Address. But after like 2 minutes the PPP link will go off and I will get this log message: "Interface Vi1 unbound from profile Di1".
View 2 Replies
View Related
Jan 24, 2012
I am using a company called Zen for adsl, I have 8 IP from XXX.XXX.XXX.248 to - XXX.XXX.XXX.255, Gateway is 254, Address 249-250-251-252-253 I would like to appear at the 4 sockets at back of router, and 252,253 will be used for a server...I understand I should be using Routed IP , but I cannot get it to work, I can ping out to google from the server, but the server is not live to the world. [code]
View 8 Replies
View Related
Nov 7, 2011
I had the Cisco 877W Router working in my old company. The old company was closed and I bring all of network equirments to new company.I am trying to setup this router to new company but lost menu, console cable and software CD.
View 2 Replies
View Related
Jan 22, 2013
I have a Cisco 877W in place with an ADSL connection, which is working fine. However I cannot get it to hand out a DHCP address. If I associate with the AP over wireless then set a static IP I have full connectivity, similarly if I connect over Eth0 and set a static IP I have full connectivity. So it does just seem to be DHCP. Below shows my config... Any thoughts on the issue? Is it access-list related?I have checked with Wireshark and I see the DHCP request being sent out, but I don't see a DHCP offer being returned
View 4 Replies
View Related
Feb 26, 2007
how to configure WPA2 /AES on 877W. Also how to enable IPS on the router. My ios is 12.4.11T1
View 7 Replies
View Related
