Cisco Wireless :: Failing To Add Aironet 1231 To WLC 5508

Jul 8, 2012

I'm having little success migrating our older Aironet1231 to our new WLC 5508. The 1231 is currently registered as a LAP to a 4400 WLC and I'm in the process of moving away from this controller to the new one.  I've pasted the output of the error messages I'm getting below.  At this point, I'm stuck and not sure how to get around the "Failed to parse CAPWAP packet" error.
 
I'm getting these messages when I have:
debug pm pki enable
debug capwap errors enable
 
I initially got this error, but got passed it when I allowed SSC in the 5508 (Security -> AP Policies)
sshpmGetIssuerHandles: SSC is not allowed by config; bailing...
 
Now I'm getting these:
*sshpmLscTask: Jul 09 11:13:11.516: sshpmLscTask: LSC Task received a message 4

View 3 Replies


ADVERTISEMENT

Cisco Wireless :: Aironet 1231 Stand-alone Mode

Sep 12, 2012

I have some old 1231 APs in the school in which I work.I would like to create a local network (no LAN, no internet, just a point to point wifi connection) managed by the access point (in DHCP).That's because we have an apple TV connected to a projector and some ipads. My idea was to put the devices locally in the same closed network for share via AIR Mirror the ipads on the apple TV.

View 3 Replies View Related

Cisco Wireless :: Cannot Connect To Second SSID On Aironet 1231

Apr 22, 2013

I have configure my AP with to SSID (11 & 12), but I cannot connect to 12. It authenticates, and while trying to acquire IP address from 12, it fails and connects me to 11 (if I have already saved the SSID connection).
 
The following is my AP status:Product/Model Number:AIR-AP1231G-A-K9 System Software Filename:c1200-k9w7-tar.123-8.JEE System Software Version:12.3(8)JEE Bootloader Version:12.3(2)JA4  
 
The SSID 12 already have 4 clients connected, And I am tring to connect a 5th one (smart phone), but cannot connect to 12, instead coneected to 11. Also tried with a laptop, but cant get the IP address, and give Limited Connectivity error.

View 3 Replies View Related

Cisco Wireless :: Reset Aironet 1231 To Factory Default?

Sep 17, 2012

I have a (old) 1231 that I would like to reuse, but no one remembers the password.  how to recover a password from this model AP or how to reset the device to factory default?

View 1 Replies View Related

Cisco Switching/Routing :: 3550-24-PWR Can't Ping Aironet 1231

Oct 30, 2012

I have two 1231G Aironet's that work correctly when I connect them to my Catalyst 3548XL and my 3550-48-XL switches.  When I connect them to the 3550-24-PWR switch I do see them when I issue sh cdp nei det.  It shows me the IP of the wireless router.  But when I ping the Aironet, I do not get any replies. If I plug the Aironet into my 3548XL and ping the IP, I get 5 replies.  Here is the port config on both switches:
 
     switchporrt trunk encapsulation dot1q
     switchport native vlan 100
     switchport allowed vlan 1,69,100,125,200,1002-1005
     switchport mode trunk
     spanning-tree portfast
 
Here is the sh cdp nei det results:
 
     Device ID: North_AP.mtd.home
     Entry address(es):
       IP address: 192.168.100.104
     Platform: cisco AIR-AP1231G-A-K9    ,  Capabilities: Trans-Bridge
     Interface: FastEthernet0/3,  Port ID (outgoing port): FastEthernet0

[code]....
 
I have tried two versions of the IOS on the 3550PWR switch.  Right now its: c3550-ipservices-mz.122-44.SE6

View 5 Replies View Related

Cisco Wireless :: Some Devices Are Failing To Connect To Aironet 1262 AP

Jun 10, 2013

Some devices are failing to connect to my Cisco Aironet 1262 AP. So far I have noted the ipad 2, a windows 8 phone and a bang and olufson speaker. Is there something I need to tweak in my config. Other devices connect fine, that is my laptop, desktop and android phone.

View 2 Replies View Related

Cisco Wireless :: 5508 - DHCP Requests Starts Failing

Feb 15, 2013

I have a school with 550 iPads.  We are using two 5508 WLCs sharing the number of APs.  The DHCP server and the default gateway for the network are on the firewall.  The clients are able to get a DCHP.  After some time, maybe about longer than a month, the clients are no longer able to get DCHP addresses.  A reboot of both controllers takes care of this.  Presently we are runing 7.2.110 OS.  I am going to upgrade to the latest 7.4.100, and reload tonight.

View 1 Replies View Related

Cisco Wireless :: Failed To Add Aironet 3502 To WLC 5508

Oct 7, 2010

I have a Cisco WLC5508 controller which I recently upgraded to software 7.0.98.0 because I tried to add a Aironet 3502 and it gave me an invalid software.  After the upgrade this is the error I get from the AP when I try to add.  [code]

View 5 Replies View Related

Cisco Wireless :: AP 1231 With WLC 7.0 Connection

Aug 7, 2012

At work we have some older 1231 AG model access-points and a WLC with version 7.0. I was trying to convert them to lightweight and they will not join the controller without importing a .CSV file into the WLC. I cannot figure out to import that file, I cannot find any documentation on how to add the certificate with version 7.0.

View 2 Replies View Related

Cisco Wireless :: 1231 AP With WLC 2504 - Compatibilty?

Jul 11, 2012

I have four 1200 series AP. Part number of these AP's is  AIR-AP1231G-A-K9. I am thinking to buy a new 2504 WLC with 5 AP licenses. Just wondering whether my AP's are compatible with WLC or not. These AP's are in close proxomity and start contending with each other if I configure the stand alone.

View 3 Replies View Related

Cisco Wireless :: 1231 Doesn't Join 2504 WLC

Oct 1, 2012

Converted a Cisco 1231 with the Update Tool to lightweight (used c1200-rcvk9w8-tar.124-21a.JA2.tar). It worked, but now the AP issn't joining the wlc: [code]

View 8 Replies View Related

Cisco Wireless :: 1231 Fail To Register To Primary WLC

Oct 29, 2011

We have found that only Cisco 1231 WAP are exhibiting this behaviour. Their Primary WLAN controller is Cisco1 WLC but they fail to register to Primary WLC and fall back to Cisco2 WLC. After about 200 sec , they attempt to connect to Primary WLC once again and fail. The whole cycle is repeated every 250 seconds.

View 3 Replies View Related

Cisco Wireless :: 1242G-E-K9 Not Seeing Other 1242s Or 1231 On Network?

Oct 31, 2011

I have a problem where clients cannot roam between Cisco 1231g-e-k9 and recently installed cisco 1242g-e-k9 access points..  On looking at the CDP option on the 1231 and 1242 access points they are all aware of each other.  However if I use the Network View option I see a different picture.  All the 1231 access points can see each other but not see the 1242's.  Network View on the1242 shows all the 1231's but none of the 1242's.  The 1231 are running ver. 12.3(8)JEB and the 1242's are running ver. 12.4(21a)JA1.

View 2 Replies View Related

Cisco Wireless :: Can't Register AP 1231 On 2504 WLC Controller

Apr 28, 2013

WLC shows the next error.
 
AP with  MAC 00:1e:13:10:40:59 (AIR-AP1231G-E-K9    ) is unknown.
 
I updated the AP to lightweighd firmware using upgrade tool. But upgrade tool generate the csv files empty so I had no idea about Hash key, so I resetted the APs to default values.
 
WLC still doesn't register them.
 
How Can I register the APs? The version of the WLC is 7.3.101.0

View 4 Replies View Related

Cisco Wireless :: Controller Software That Supports 3600 And 1231 APs?

Dec 4, 2011

Customer is interested in deploying the 3600 AP's but will not be able to replace all his 1231's, any chance there is a release between 7.0.220.0 and 7.1.91.0 that will support both AP's?

View 6 Replies View Related

Cisco Wireless :: Disable AP Mode Multicast In 1231 Series Access Point

Jan 23, 2013

I have one controller 2504 and some 1200 series access points.I am using 3 SSID .I want to use two ssid in HREAP mode but HREAP mode is not showinh in access point because multicast is enabled on AP mode. see the below picture

I have disabled the multicast globally from CLI. config network multicast global disabled
 
disabling the multicast so that i can set the access point in HREAP mode.

View 3 Replies View Related

Cisco :: Changing AP 1230 And 1231 From Lightweight To Autonomous

Jan 22, 2013

I cannot TFTP this tar file to both 1230 and 1231 APs. Both are lightweight APs that I've wiped to the rommon mode (ap>) and I issue the command:
 
tar -xtract c1200/k9w7-mx.123-8.JA 10.0.0.2
 
And I get a error saying: "permission denied"
 
Notes:
The AP has defaulted to the 10.0.0.1 IP.
My laptop is set to 10.0.0.2 255.255.255.0 IP
My TFTP-Server is on and the root folder with the .tar file is in there.
ether_init, flash_init, tftp_init (these commands have been executed)
My firewall is disabled.

View 18 Replies View Related

Cisco :: 1231 / External RADIUS Attributes For MAC Authentication

Jun 21, 2006

We have a 1231 AP and a Freeradius Server.Now we are using MAc authentication.The thing is that the AP sends two parameters to the RADIUS:
 
User-Name = "000ff855df2e"
User-Password  =  "000ff855df2e"
 
both are the MAC of the wireless client.I want that the AP send:
 
User-Name = "00-0f-f8-55-df-2e"
User-Password  =  "mykey"
 
Note that the MAC is dash separated and the password is forced to the key that I want.

View 2 Replies View Related

Cisco :: Autonomous 1231 / 1242 Radius Configuration?

Jan 12, 2011

I can't seem to get the SSID RadiusTest to work properly.
 
Windows PC's show "Windows was unable to find a certificate to log you into the network". Macs don't authenticate either. Radius server isn't seeing any requests at all. Radius server is working because we are authenticating other things to it.
 
On my test 1231, IOS is 12.3(8) JEB1. 
 
version 12.3
no service pad
service timestamps debug datetime msec

[Code].....

View 2 Replies View Related

Cisco :: Radius Auth Fails For Some Machines After Upgrade From 1231 To 1142

Dec 9, 2012

After upgrading from a 1231 autonomous to an 1142 autonomous AP some machines can no longer authenticate.  AP logs show authentication failure and access reject coming from the Radius server.  Radius server shows authentication failures but no specific reason.  Using the same account on another machine works fine.  Machine settings have been verified and if we go back to the 1231 all users authenticate fine.  Below are the configs:
 
OLD AP:
 !
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption

[code]...

View 3 Replies View Related

Cisco Wireless :: 2106 WLC - Failing To Console Into Device

Jun 6, 2013

I have been having problems with a 2106 WLC which seems to have developed a fault. I cannot console into the device (although I can console into the ap1131ag showing no fault with the RJ45 - 9 Pin) and the device is no longer showing up in any of the possible I.P ranges.
 
Its showing a power light and a status light on the front panel, the Ethernet ports light up like a Christmas tree when a device is connected and the power supply is putting out a solid 47.7v.
 
Has anyone experienced anything like this before and can anyone suggest anyway of breathing life back into it? 

View 5 Replies View Related

Cisco Wireless :: 2504 - Canon Printer And AirPrint Failing With WLC 7.0

Jan 21, 2013

Recently i converted a customer's APs to LWAP and installed a 2504 WLC. Everything came up and is acting good, but the printer is no longer printing.  It can neither be discovered using windows networking, nor bonjour.  It worked until LWAPP conversion.

It is an AirPrint device, a Canon mx892. Trying to print using an IP port fails, AirPrint fails, and sharing it through the attached Mac also fails. I dont know enough about printers or AirPrint to effectively troubleshoot.  The customer opened a case with Canon, who says its a network issue. I cannot get it configured on the wire, apparently setting up a printer isnt as easy as it used to be.

View 1 Replies View Related

Cisco Wireless :: HWIC-3g-HSPA-G Firmware Or Hardware Failing?

Dec 12, 2011

Within the space of a few days we've had 2  HWIC-3G-HSPA-G cards appear to fail on different router models. In each case the sh cell x/x/x hardware output is empty i.e no firmware version or other data provided and the radio status is off. Attempts to force the interface down using the test ....modem-power-cycle or radio-power off get the same error message that the modem is still in reset. Reloading the router does not clear this so we recently tried to update the firmware using the latest version off CCO. The upgrade using the microcode commands failed with an error of "unable to determine the modem state".

View 3 Replies View Related

Laptop Keeps Suddenly Failing To Detect Wireless Network

Apr 19, 2012

My wireless internet connection on my laptop. The connection seems to work fine on other laptops in the flat. It works on mine too. Then after a short time the internet connection fails and the laptop says it's unable to connect to preffered wireless network, and unable to detect any wireless networks (usually there are others around too).The amount of time before this happens seems to be getting less. I have cheched that the radio switch on the side of the laptop is on.

View 5 Replies View Related

My Wireless Connection Is Failing When Acquiring Network Address

Mar 6, 2012

I have fitted a thomson router to my desktop coputer using an ethernet cable and all is working fine. My Sony Vaio laptop recognises the wireless connection but fails to connect at the acquiring network address. I have been into the properties section of the network connection page and am only allowed 8 characters for the network key. But the Network key on the bottom of the modem is longer than 8 digits.

View 1 Replies View Related

Windows 7 64bit OS - Wireless Connection Keeps Failing Repeatedly?

Mar 18, 2011

I am having problems with my wireless internet. I am using windows 7 64-bit OS and am connected to a WRG614v6 Netgear router. I will be on the internet and will have superb connection then my connection will drop, when i view the network it says that i have lost IPv4 connectivity. Pulling the power to my router then powering it on again fixes the problem for a hour or two but then connection is lost again.Here is the readout when connection is stable

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:UsersKyle>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kyles-Laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....

View 19 Replies View Related

Dell :: N5010 Wireless Randomly Disconnecting And Failing

May 28, 2013

I've had a N5010 laptop from a few years without many problems, using Win7 60b. Just a few days ago the wireless connection started failing saying there is no network available and that "there was a problem", what I had to do is right click the icon on the task bar, select the troubleshooting option that windows offers to fix it automatically, and after a minute or so the wireless is activated and working again, but just for a while since it lasts about 3~20 minutes and the problem starts again.

Other devices (like phones or other laptops) don't have this problem, so it's not a router issue.I've tried updating windows, re-installing the official drivers, rebooting the system, etc. I've also discovered that ethernet connection is just not working, as if it weren't there. There is no device shown on the windows device manager for ethernet.

View 14 Replies View Related

Linksys Wireless Router :: E4200 Wired Network Failing?

Jan 12, 2013

my general internet connectivity with my e4200.I have a new but similar problem today with the same router.After powering down equipment and moving it around, my wired connections all error. Error in that they will not get an IP address nor will they connect to the internet or each other.My wireless connections still work flawlessly.
 
I tried powering down the devices over night (to avoid any heating issues) and then powering up but the results are the same. I am obviously missing something, and don't really want to start my network from scratch again...

View 5 Replies View Related

Linksys Wireless Router :: Ea4500 Keeps Failing To Load Webpages?

Mar 16, 2013

I'm having this problem with the ea4500 where occasionally web pages will not load.  The internet doesn't go down, but the page will just not load.  Meanwhile other sites WILL load at the same time.  After a minute or two, the site will load and there will be no problems.  I searched for this problem, and found changing the MTU may work, but from what I read, those people never could connect to the websites in the first place.  I've tried changing the MTU, but it appears it keeps on happening.  Also, I am able to play a video game at the same time, which is connected to the internet, that never goes down.

View 3 Replies View Related

Cisco Wireless :: MSE 3310 Upgrade 7.0.201.204 Failing Mobility Services Engine Software

May 11, 2011

I am trying to upgrade an MSE from version 6 to 7.0.201.204. I am able to copy across all the files and have tried using WCS and FTP for the CISCO-MSE-L-K9-7-0-201-0-64bit.bin file but the installation procedure always fails.
 
I will download all the images again tonight. Is there a way to delete the images from the /opt/installers/ directory?
 
Also the upgrade procedure in the 7.0.201.204 is pretty bad, there is no detail in any of the steps.
 
Here is output from the upgrade -
 
[root@SDC-MSE-01 installers]# dirCISCO-MSE-L-K9-7-0-201-0-64bit.bin  database_installer_part3_4.zipdatabase_installer_part1_4.zip      database_installer_part4_4.zipdatabase_installer_part2_4.zip

[Code].....

View 6 Replies View Related

Linksys Wireless Router :: WRT310N V2 Failing To Resolve Domains Correctly

Oct 29, 2012

So i see tons of threads here and on google talking about dns issues with their linksys router but I never see a solution other than to locally change the dns servers on the client machine to prevent it from using the linksys router dns.  My router is the WRT310Nv2 running the latest firmware but I see others are affected as well.   url...My issue is this router continues to fail dns resolutions and I have to either reset it or tell my client machine not to use my router as a point of dns resolution. 
 
1. Why is my router failing to resolve domains correctly?

2.  Is there anyway to fix this from the router?

View 7 Replies View Related

Wireless :: Netgear Router Connected To Comcast Modem - Internet Access Failing

Mar 23, 2011

Every day for the past week my Internet access goes down. I have a netgear router connected to Comcast modem. I have to reset the modem then the router constantly and it gets irritating. I called comcast and they say reset them. But why should I have to constantly reset.... Sometimes I just ignore it and it comes back up later... what is going on??

View 1 Replies View Related

Cisco :: LMS 3.2 Job Browser Failing

Jan 13, 2011

When I select Job Broser I get the following crash, LMS 3.2, server has been restarted but I continue to get the error. [code]

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved