Cisco Wireless :: Monitor Connected Clients On SR520?

Jun 5, 2012

I have installed an SR520 with wireless for a client. They have asked if there is an easy way for them to monitor who is connected to the wireless at any given point in time. They are not capable of using the IOS command line.

View 1 Replies


ADVERTISEMENT

Cisco Wireless :: WCS 7.0 - Monitor Clients Displaying Wrong Information?

Jan 30, 2011

I've been having some problems with the Monitor Clients menu on a WCS 7.0 server, for instance if I go there and display the detected clients on the last 24 hours I get a different set of clients than if I go and generate a report of unique clients for the last day on the report menu. Is this normal?, shouldn't both reports get the data from the same place and give the same result?.

View 4 Replies View Related

Monitor Broadband Usage Of PCs Connected To Wireless Network?

Oct 30, 2011

How can I monitor broadband usage of multiple PC's connected to a wireless router/modem?

View 1 Replies View Related

Linksys Wireless Router :: Monitor Devices Connected In E3000?

Nov 16, 2011

I've got the E3000 set up and working.  What I'd like to do now is monitor all the devices' connectivity to it. The bandwidth it consumes and stuff.  Is there a way to do that on my router?

View 6 Replies View Related

Cisco Wireless :: How Many Clients Can Be Connected To Aironet 1040 AP

Jan 1, 2013

i have ~ 25 employees which are connected to the AP . I have a 2mb dl and 2mb ul microwave lease line.The AP disconnects ever couple of hours for a minute?

View 3 Replies View Related

Cisco :: Clients Connected To Wireless End Points Are Not Resolved In LMS 4.2

Feb 14, 2013

IP addresses of the clients connected to Wireless end points are not getting resolved in LMS 4.2 user tracking ? Whether LMS will resolve IP addresses of the clients connected through Wireless end points ?
  
Note : Those wireless end points are not monitored by LMS

View 1 Replies View Related

Cisco Wireless :: How Many Clients Can Be Connected To 2600 Series AP

May 8, 2013

My question relates to how many clients can be connected to a 2600 series AP.  The documentation states 200 clients per radio and the AP has three radios.  However when my AP gets to 200 it rejects further clients with the following log: [code] I see this exact message many times and each time the radio mac address is the same and the number of clients connected is 199.   The same mac address is used for both 2.4ghz and 5ghz so does this AP have a single logical radio covering both 2.4 and 5ghz frequency ranges and is the limit for all connected clients 200?When viewing the AP details under the Wireless tab it only lists one mac address for each AP for both 2.4ghz and 5ghz frequencies.

View 11 Replies View Related

Cisco Wireless :: 1242AG / Maximum Clients Connected To AP

Mar 11, 2012

I have 1242AG. how many clients can be connected to this AP??

View 4 Replies View Related

Cisco Wireless :: Any Way To Get Information About Clients Connected To AP WAP200

Mar 16, 2013

is any way to get information about clients connected to an AP WAP200?

View 2 Replies View Related

Cisco Wireless :: Aironet 1600 Standalone WAP / How To Get Clients Connected

May 15, 2013

I just installed an Aironet 1602i, standalone WAP. I have it configured to use a RADIUS server in our office. However, two issues have come up when trying to get clients connected.
 
iPhones and iPads won't connect to either the 2.4 or the 5 GHz radios.
 
No one can connect to the 5 Ghz radio.
 
Both radios are UP according to the GUI interfaces of the WAP. Also, laptops and android devices are able to connect to the 2.4GHz radio but not the 5 GHz radio.
 
I am on the latest version of the firmware.

View 1 Replies View Related

Cisco Wireless :: WAP321 - Clients Connected To Single Access Point?

Oct 15, 2012

How many wireless clients can connect to a single WAP321 Access Point?            

View 2 Replies View Related

Cisco Wireless :: How To Block P2P Traffic Of Clients Connected To Same SSID On WLC 4400

Feb 2, 2010

I use two wlc 4400 (4.2.x version) with a mobility domain and one ssid, both wlc are connected to a cisco l2 switch infrastructure. On the wlc I use the p2p blocking action 'drop' [URL] to isolate the clients from each other. Does only unicast traffic is blocked or also multicast and broadcast traffic like arp requests?Concerning blocking p2p traffic of clients connected to the same ssid but different controllers I found the following statement in the LAP FAQs [URL]

Q. In autonomous APs, Public Secure Packet Forwarding (PSPF) is used to avoid client devices associated to this AP from inadvertently sharing files with other client devices on the wireless network. Is there any equivalent feature in Lightweight APs?
 
A. The feature or the mode that performs the similar function of PSPF in lightweight architecture is called peer-to-peer blocking mode. Peer-to-peer blocking mode is actually available with the controllers that manage the LAP. If this mode is disabled on the controller (which is the default setting), it allows the wireless clients to communicate with each other through the controller. If the mode is enabled, it blocks the communication between clients through the controller. It only works among the APs that have joined to the same controller. When enabled, this mode does not block wireless clients terminated on one controller from the ability to get to wireless clients terminated on a different controller, even in the same mobility group.
 
what's the best practise to prevent this inter wlc client traffic? I already read about using acls on the wlc dynamic interfaces, or private vlans on the l2 switch vlans where the dynamic interfaces are connected to. Is it allowed to completely isolate the wlc from each other on these dynamic interfaces with acls or private vlans or do the wlc need to see each other on this interfaces (e.g. heart beat)?

View 19 Replies View Related

Cisco Wireless :: AP 1260 Configuration / 0 Clients Connected And Light Always Green

Feb 5, 2013

Recently I have installed and configurated an AP 1260, it has already IP, SSID, and ping to the router, but after install the antenna I open the web configuration and see that it has 0 clients connected and the light is always green, indicated as only is configurated with nobody connected.
 
Tha radio setting is up, 2,4 Ghz and 5 Ghz any issue with the antenna? or i need to configure anything else?

View 1 Replies View Related

Cisco Wireless :: AP-1141N-A-K9 / How To Know If Wireless Clients Are Connected Under N Mode

Nov 13, 2012

I would like the know if there is a way to know which wireless clients are connected under N mode. There is any kind of command where can show me that ?. I don´t have a wireless controller. My AP is AP-1141N-A-K9

View 2 Replies View Related

Cisco Wireless :: 4095 With 3560 Clients Cannot Ping Default Gateway When Connected To SSID

May 21, 2013

My controller is vWLC installed in ESXi which has to vNet Cards configured with all vlans(4095), then it is connected to a 3560 switch with trunk. The configuration of the switch interface is as belows: The SSID is BYOD and I can connect the SSID and get the IP address such as 10.10.10.118/24, but for now, i cannot ping 10.10.10.1, but i can ping 10.10.10.90.

View 3 Replies View Related

Cisco WAN :: C2950 - Monitor Port Where Modem Is Connected From Host?

Jul 22, 2011

I have build topology like this:
 
host------c2950(f0/3)------(f0/4)c3550(f0/41)----modem-----Internet
 
I wanted to monitor c3560 port where modem is connected from host. So for that I configured rspan. configurate show below. But problem is that after configuration f0/4 of c3550 remains up and f0/3 of c2950 goes down. WHen I look at status of f0/4 it show "FastEthernet0/4 is up, line protocol is down (monitoring)". I tried to search websites It seems configuration is fine.

[code]...

View 1 Replies View Related

Cisco :: OID To View Clients Connected With AP 5508 WLC

Nov 17, 2011

Need implementation of an OID to view the number of connected clients per Access-Point? I am using a 5508 WLC.

View 4 Replies View Related

How To See The Clients Connected To A TP-Link TD-W8960N

Apr 17, 2013

I have a TP-Link TD-W8960N Wireless Router. I would like to know what the I.P. addresses of connected clients are (both those connected wirelessly & those connected by Ethernet cable). There are about 6 computers in my network, some have dynamic and others have static I.P. addresses.I am finding it difficult to navigate the router,on which menus get me to the information that I am interested in

View 1 Replies View Related

Cisco :: Ap 1130 Clients Connected To Wlan Controller Don't Obtain Ip From Dhcp

Dec 15, 2011

I am struggling with the following issue. I have 6 1130 Accesspoints in lightweight mode connected to a 2106 wlan controller which runs software version 7.0.98.0. Everything seems to work fine. Clients can connect to the wifi network. However, they don't get an ip address from the dhcp server which is on the same subnet as the wlan controller. See attached screenshots for configuration. I have also tried the internal dhcp server of the wlan controller, but the same problem remains.
 
The logs says: Dropping primary discovery request from AP e8:b7:4x:xx:xx:xx - maximum APs joined 6/6 There are 6 AP's connected

View 4 Replies View Related

Cisco Switching/Routing :: 881W - List Connected Wlan Clients?

Mar 4, 2012

Cisco 881W WLAN module running in autonomous mode. How do I list connected wireless clients?

View 1 Replies View Related

Linksys Wired Router :: RV042 VPN Can't Access Connected Clients

Jun 23, 2012

I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can't access clients which are connected to router. I have added rules also in firewall.

View 1 Replies View Related

Linksys Cable / Dsl :: Wag320n Web Interface Wifi Speed Of Connected Clients

May 11, 2012

Is there a way to know from the web interface the wifi speed of the connected clients?

View 1 Replies View Related

Routers / Switches :: Dlink DIR 615 Router - Wireless Clients Can't See Ethernet Clients

Feb 1, 2011

I have 4 desktops cat5 to Dlink DIR 615 router. All work fine. Any wireless clients, laptop or netbooks, see the desktop computers for a while then disconnect somehow. All machines can see the Internet through the router at all times. The desktops disappear from the laptop/netbooks but the wireless machines can be seen from the desktop computers but clicking on them gets 'Access Denied' message after a wait.3 desktops = XP, 1 98SE. All laptop/netbooks = XP

View 2 Replies View Related

Linksys Wired Router :: RV042 Can Access Clients Which Are Connected To Router

Jun 23, 2012

I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can access clients which are connected to router. I have added rules also in firewall.

View 1 Replies View Related

Cisco VPN :: ASA 5505 VPN Clients Can't Ping Router Or Other Clients On Network

Jun 18, 2012

I have a ASA5505 and it has a vpn set up. The VPN user connects using the Cisco VPN client. They can connect fine (the get an ip address from the ASA), but they can't ping the asa or any clients on the network. Here is the running config:
 
Result of the command: "show running-config"
 
: Saved
:
ASA Version 7.2(4)
!
hostname ASA
domain-name default.domain.invalid
 
[code].....

what I need to add to get the vpn client to be able to ping the router and clients?

View 3 Replies View Related

Cisco VPN :: 5520 / 5510 - Can VPN Clients Communicate With Other Dynamic Clients

Nov 5, 2012

We currently have an ASA 5520 communicating with 10 ASA 5510's, all on static outside addresses.  I was asked to add 5 additional 5510's on dynamic address.  All worked well in testing until it was decided that some of the dynamic clients needed to talk to each other.

My testing shows packets just dying in the 5520.

View 1 Replies View Related

Cisco VPN :: Can SR520 Do More Than One Crypto Map

Jan 11, 2013

I'm trying to get several VPN tunnels up. It seems that only 1 map can be assigned to the WAN interface (fa4). Is this true or is there an 'extended' map like ACLs?

View 1 Replies View Related

Cisco VPN :: SR520 Is No Longer Made

Sep 19, 2012

I an aware the SR520 is no longer made, But we use the VPN Remote aspect of it (For site to site UC540 installs), is there anything else that has the same VPN functionality, and what would i be looking for in regards to terms for the client to be on the router itself?

View 0 Replies View Related

Cisco VPN :: SSL VPN With Active Directory On SR520

Apr 7, 2011

Having problems configuring an SR520 to support SSL VPN with Active Directory authentication. I set up the domain  and a user in the SR520. and get the login prompt remotely but when attempting to login using the active directory account i get a login error. I can login fine using local authentication.

View 5 Replies View Related

Cisco Firewall :: SR520 Can Only Ping

Aug 10, 2011

I just received a new SR520-FE router and am having a hard time getting it configured right. AS of now it is in my lab in a simulated "customer environment". I can ping what's behind it, what's in front of it. But I can't get outside access. I know it's probably something small so I am hoping another pair of eyes might be able to see what I don't. Here is the running-config. It's the factory setup minimally adjusted.
 
SR520 Base Config - MFG 1.0
User Access Verification
Username: ciscoPassword: SR520#show runBuilding configuration...
Current configuration : 6177 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname SR520!boot-start-markerboot-end-marker!logging message-counter syslogenable secret 5 $1$m/V3$CM6/dHniD1KgHsPZV6jV70!no aaa new-model!crypto pki trustpoint TP-self-signed-

[code]....

View 3 Replies View Related

Cisco Routers :: SR520 - SSL VPN Through DynDNS

Mar 29, 2011

I have a SR520 where WAN configured as PPPoE with Dyndns address. I have done all the configuration  through the CCA, so far everything is working fine. But now i want to configure SSL VPN, but I have getting an error message : SSL VPN cannot be configured, please configure wan interface using a static IP address. Is there any way that I can configure the ssl vpn through a dyndns address?

View 5 Replies View Related

Netgear WNDR4500 - Clients Not Showing Up In Clients List

Jul 6, 2012

I have a Netgear WNDR4500 running the stock firmware, acting as a router for my home. I also have 2 routers that are flashed with DD-WRT (Linksys WRT54G and Asus WL-520GU) running as client bridges. The Netgear is 192.168.1.1 and the other 2 client bridges are 192.168.1.2 and 192.168.10.3. The Netgear router is performing DHCP giving addresses from 192.168.10.100 to 192.168.10.254. I have numerous machines connected to the Netgear, wirelessly and wired, and numerous machines wired to each client bridge. All machines have IP addresses that are 192.168.10.100, 192.168.10.101, 192.168.10.102, etc... Everything is working fine, but I have one question: When I access the Netgear router, it shows the client bridges as clients, machines that are wired and wireless to the Netgear router are listed as clients, but the client list does not show any clients that are connected to the client bridges. I assumed that since the router is performing DHCP that all clients would show up.

View 2 Replies View Related

Cisco Routers :: Install SSL Certificate From CLI On SR520

Sep 13, 2011

How to install an SSL key + certificate on our SR520 from the CLI. I have found the following document.
 
[URL]
 
I basically have the following files that I need to install:
 
Key file:
domainname.key
 Certificates file:
AddTrustExternalCARoot.crt

[Code].....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved