Cisco VPN :: Can SR520 Do More Than One Crypto Map
Jan 11, 2013I'm trying to get several VPN tunnels up. It seems that only 1 map can be assigned to the WAN interface (fa4). Is this true or is there an 'extended' map like ACLs?
View 1 Replies
ADVERTISEMENT
Cisco VPN :: SR520 Is No Longer Made
Sep 19, 2012I an aware the SR520 is no longer made, But we use the VPN Remote aspect of it (For site to site UC540 installs), is there anything else that has the same VPN functionality, and what would i be looking for in regards to terms for the client to be on the router itself?
View 0 Replies View RelatedCisco VPN :: SSL VPN With Active Directory On SR520
Apr 7, 2011Having problems configuring an SR520 to support SSL VPN with Active Directory authentication. I set up the domain and a user in the SR520. and get the login prompt remotely but when attempting to login using the active directory account i get a login error. I can login fine using local authentication.
View 5 Replies View RelatedCisco Firewall :: SR520 Can Only Ping
Aug 10, 2011I just received a new SR520-FE router and am having a hard time getting it configured right. AS of now it is in my lab in a simulated "customer environment". I can ping what's behind it, what's in front of it. But I can't get outside access. I know it's probably something small so I am hoping another pair of eyes might be able to see what I don't. Here is the running-config. It's the factory setup minimally adjusted.
SR520 Base Config - MFG 1.0
User Access Verification
Username: ciscoPassword: SR520#show runBuilding configuration...
Current configuration : 6177 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecno service password-encryption!hostname SR520!boot-start-markerboot-end-marker!logging message-counter syslogenable secret 5 $1$m/V3$CM6/dHniD1KgHsPZV6jV70!no aaa new-model!crypto pki trustpoint TP-self-signed-
[code]....
Cisco Routers :: SR520 - SSL VPN Through DynDNS
Mar 29, 2011I have a SR520 where WAN configured as PPPoE with Dyndns address. I have done all the configuration through the CCA, so far everything is working fine. But now i want to configure SSL VPN, but I have getting an error message : SSL VPN cannot be configured, please configure wan interface using a static IP address. Is there any way that I can configure the ssl vpn through a dyndns address?
View 5 Replies View RelatedCisco VPN :: 877 - Crypto Map With NAT
Mar 7, 2011I have this situation, I need to establish an IP sec communication to another site but I need to identify all my packets sent, as a different networks as my local one. for example: my local network is 10.5.0.0/24 and I need to sent packets as 10.6.0.0/24. I suppose that I need to do Nat with this IPs. But in this router Nat is already applied to outbound traffic to Internet. How can I apply this NAT to crypto map only?
My router is a Cisco 877 with 12.4 IOS an this is the relevant configuration, crypto map vpn it´s used to sent traffic to second site.
crypto isakmp policy 2 encr 3des authentication pre-share group 2crypto isakmp key xxxxxxxxx address XX.XX.XX.XX
crypto ipsec transform-set vpn esp-3des esp-sha-hmac
crypto map vpn 1 ipsec-isakmp set peer XX.XX.XX.XX
[ code]....
Cisco Routers :: Install SSL Certificate From CLI On SR520
Sep 13, 2011How to install an SSL key + certificate on our SR520 from the CLI. I have found the following document.
[URL]
I basically have the following files that I need to install:
Key file:
domainname.key
Certificates file:
AddTrustExternalCARoot.crt
[Code].....
Cisco VPN :: EZVPN Between 2811 And SR520 Flapping
Mar 31, 2011I am having an issue get an EZVPN working between a 2811 server and a SR520 client. The symptoms are the SR520 makes multiple connection attempts to the 2811. It appears that sometimes these connections are successful and the SR520 is assigned an IP address but then the tunnel will be dropped and a new session will be started. I've attached scrubed configs for both the 2811 and the SR520. One other note, when connecting to the 2811 with a software VPN client, there are no problems, so I think the problem is with the SR520. On the other hand, the SR520 wasn't having any problems until we switched our VPN server from a UC520 to the 2811.
View 3 Replies View RelatedCisco WAN :: Sr520 Some Website Didn't Work
Jan 12, 2012I have cisco sr520 adsl router i have everything set up and it is ok. Internet work but i can not open some web pages In DNS is not problem NAT work fine. When i try some simple adsl gateway the problem websites work correctly. I think the problem is on sr520 router.
View 5 Replies View RelatedCisco VPN :: Using Static VTI On SR520 To RV110w IPsec?
Oct 7, 2012I am trying to set up a static VTI IPsec VPN between a SR520 and a RV110w. This works fine between the 520 and an 861, but the RV110 complains about the "permit ip any any" default policy of the VTI. (Same thing happens with the 861 and rv110) How to put a policy in place that would be used in negotiating the tunnel that the 110 would accept?
Attached the lines out of the 110's log and the VTI setup.
Cisco WAN :: Configure SR520 As PPPoE Server
Mar 27, 2012I´m trying to configure SR520 Cisco router as PPPoE server. The point is, when configuration is done and PPPoE client is directly connected to the interface, SR520 doesn´t respond to incoming PADI. PADI is not shown in PPPoE debugs (debug pppoe events, packets and errors).On the other hand, I get the PADI capturing packets with wireshark (so PADI is being sent) and the same configuration on other router works fine.
View 2 Replies View RelatedCisco VPN :: SR520 / IOS IPSec With VPN Client Configuration?
Apr 12, 2011I am having a tough time getting my VPN client to reach any devices on my office network. I have a Cisco SR520 configured with IPSec to terminate Cisco VPN client sessions. The client is able to connect successfully. I get a username/password challenge, and then I get assigned a pool IP address on the client computer. So the VPN connection looks good at that point but I cannot reach any devices in the office network.
Config below:
Building configuration...
Current configuration : 8066 bytes
!
! Last configuration change at 06:14:35 PDT Wed Apr 13 2011 by admin
! NVRAM config last updated at 06:17:11 PDT Wed Apr 13 2011 by admin
!
version 12.4
[code]......
Cisco Routers :: Connecting 800 Series Through A Sr520?
Jan 12, 2012i have a demroom set up which includes a sr520 as the edge router connecting to the ISP and i have a uc 560 connected to that which is working fine i also have a new business edition 3000 and a 800 series router which im looking to connect to the sr 520 for access to the ISP as the 800 series doesn't have a ADSL line on it .i have given the 800 series routers wan interface a static address of 192.168.75.14 wich is from the address range in the sr520s default vlan and excluded the address from the DHCP pool. now from the ccp express on the 800 s i can ping the wan port of the 800 s and the default vlan/gateway of the sr520 and the wan ip of the sr520 but no further also once i try pinging it from the cmd on windows i cant ping any further that the wan interface on the 800 s .
View 2 Replies View RelatedCisco Routers :: SR520 No IP Name Server Command
Nov 22, 2012I'd like just notify the missing "no ip name-server" command in sr520 series router. However is possible to enter the command "ip name-server" the only way to delete it is to copy a modified config from tftp or other source to the startup config. This behavior is normal?
View 1 Replies View RelatedCisco VPN :: Setup VPN Between UC540 And SR520 With Remote IP?
Apr 30, 2010setting up a link between a Head Office UC540 and a remote SR520 which I want to use a PC and an IP Phone from. This remote site is the first of several.I've found several examples of site to site IPsec VPNs, but none with references to voice and data VLANs, do I need to worry about this or will the phone just work.
View 5 Replies View RelatedCisco VPN :: IPSEC Split Tunnel With SR520
Aug 3, 2011I've created an IPSEC VPN site-to-site from a SR520 (remote office) to a Nortel Contivity(home office)...all works really well on the VPN front as I can communicate effectively over the tunnel. However, this setup will be deployed at a few smaller sites and I'd like to setup a split tunnel so that Internet bound traffic goes straight to the Internet while traffic bound for our home office goes over the IPSEC Tunnel.
View 1 Replies View RelatedCisco WAN :: SR520 - Configure VPN With (server And Client) Using CCA
Mar 15, 2012I'd like to configure a VPN with two SR520. the first router is a SR520-FE-K9 and it's at office, the second router is a SR520-ADSL-K9 and it's at home.
Each router have a static IP and individually works well. I tried to configure, by CCA, the office router as a server and the home router as a client: at home I can't see the office network and I can't navigate.
Need step by step, using CCA to configure a secure VPN.
Cisco Switching/Routing :: Netflow On SR520
Mar 18, 2013I have a SR520 just deployed at a remote site with Internet Access.
Working Environment:
Remote sites have SR520 with IPSEC VPN back to HQ and netflow v.5 works through the VPN back to our PRTG server.
Non-Working:
I cannot get Netflow data to our PRTG with this first SR520 implemented with Zone Base Security. I am not able to get my netflow traffic out. VPN is up and running. Internet is a dialer0 interface. I have a Kron job that does the copy run to tftp backup daily to the same PRTG server and it works fine.
Both my source interface and address on the TFTP command and the netflow commands are the same interfaces (VLAN75) and IP. The Destination ip is the same too (through the VPN tunnel).
Snipped:
flow exporter prtg
destination x.x.x.x
source Vlan75
[Code]....
Cisco VPN :: 881 ISR Crypto Isakmp Not Available
Jun 26, 2011I have to connect one of our it labors with some ec2 instances in amazon vpc. I downloaded a configuration file from amazon which starts with the command
crypto isakmp policy 200
My router tells me that he does not know crypto isakmp.
I searched on the internet and found that i have to install a specific license, but unfortunately i cannot find which license i have to install.
The show license command show following licenses
AdvIpServices active
AdvSecurity active
advsecurity_npe, ios-ips-update, waas_Express no state displayed
ssl_vpn active but eula not accepted
I found that i can accept the eula license with license boot module c880-data technology-package SSL_VPN command
But this command is also not available on my device. getting the crypto isakmp command working?
Cisco WAN :: IOS 2650XM To Buy 12.5 With Crypto
Sep 4, 2012I have a 2650XM 16mb flash, 64 mb ram. 12.2(12a). now I want to buy 12.4(25d) with crypto. How much is it? And where can I buy it ?
View 10 Replies View RelatedCisco Wireless :: Monitor Connected Clients On SR520?
Jun 5, 2012I have installed an SR520 with wireless for a client. They have asked if there is an easy way for them to monitor who is connected to the wireless at any given point in time. They are not capable of using the IOS command line.
View 1 Replies View RelatedCisco Routers :: Combine Dynamic And Static NAT On A SR520?
Feb 3, 2012I'm trying to combine dynamic and static NAT on a SR520. My dynamic NAT is specified with:ip nat inside source list 1 interface Dialer0 overload access-list 1 permit 192.168.0.0 0.0.7.255 In addition to this I want to perform static NAT for a couple of selected internal hosts. I can do this:ip nat inside source static 192.168.1.5 10.85.10.2 which works fine but means that the source address 192.168.1.5 is translated to 10.85.10.2 for all destination IPs. What I want is for the above static translation only to occur for a particular destination subnet.To accomplish this I have tried:
ip nat inside source static 192.168.1.5 10.85.10.2 route-map toOtherSite
route-map toOtherSite permit 10
match ip address 150
access-list 150 permit ip 192.168.1.0 0.0.0.255 192.168.10.0 0.0.0.255
But this does not appear to work. Instead it seems to render the host 192.168.1.5 unable to progress through the NAT, whether the destination subnet is 192.168.10.0/24 or not, and I can't work out what I'm doing wrong.
Cisco Routers :: Sr520 Nat Connects To Internet But Does Not Work
Feb 18, 2010I have configured the sr520 using cca.Basically I have a device connected to the sr 520 via wireless with the ip address 192.168.200.160.
The SR connects to the internet using adsl and pppoe.I configured NAT to the device for a number of ports, however it doesnt work.
Cisco Routers :: Completely Disable DHCP On SR520-FE?
Dec 13, 2011how can I completely disable DHCP on SR520-FE?
View 8 Replies View RelatedCisco WAN :: SR520 ADSL Router Direct Communication
Mar 15, 2011we have cisco sr520 adsl router at one of the sites. A device is connected to the LAN and needs to be communicated directly to the server with 3rd party over internet. we have a static public IP( a.b.c.d) for cisco router and want this IP redirected to the LAN IP address(192.168.1.20) of the device but locked to only 2 inbound IP address (eg.-1.2.3.4 , 5.6.7.8) .
View 1 Replies View RelatedCisco :: C2951 ISR Can't Configure Crypto Map?
Aug 8, 2012i have 2951 ISR but i cant configure encryption it have UniversalK9 IOS and i cant find any other ios that will support crypto map?
View 4 Replies View RelatedCisco WAN :: C1941 Crypto Is Not Enabled
Aug 5, 2012i have Cisco 1941 router with following IOS image:Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.0(1)M5, RELEASE SOFTWARE (fc2) below mentioned commands are not working :
crypto isakmp policy 5
encr aes 256
authentication pre-share
group 2
what could the issue ? do i need to change the IOS image.
Cisco Firewall :: PIX 525 Crypto Map Correction
Jun 13, 2012This setting is correct?
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
[Code]...
Cisco VPN :: 881 - Isakmp Crypto Module Not Available
Aug 21, 2012I have a Cisco 881 ISR (CISCO881-SEC-K9) and have the advanced security license installed and enabled/active and in use (see screenshot). However, the isakmp crypto module is not available.
[code]....
Cisco WAN :: SR520 ADSL Router - Speed Limit On VLan 3?
Jan 15, 2012I have cisco sr520 adsl router. I have configured two vlans i need in vlan 2 speed only 2 Mbit/s from 6Mbit/s (full speed).
View 1 Replies View RelatedCisco Switching/Routing :: SR520 ADSL Connection With PPoE?
Dec 12, 2010I have a SR520W-ADSL-K9, I´m trying to setup it trough CCA, but I have some troubles. At the internet connection I mark PPoE option, enter the vci=0, vpi=35, the username, the password (like the ISP TELMEX suggest), and mark the IP Negotiated option, but I have not find the ISP service give me an IP Address and establish the connection.
View 6 Replies View RelatedCisco WAN :: SR520-ADSL-K9 - Can't Even Connect To Router After Power Failures
Aug 6, 2012I'am a bit newbie at using Cisco products and here is my problem : I have set up a VPN tunnel between 2 Sites (A and B) a few month ago using 2 cisco SR520-ADSL-K9. All was working fine until power failures occured on the sites B (secondary site).
What happened was that none of the ethernet ports were working, excepting during booting, I was then able to ping computers linked to ports Fastethernet0, FastEthernet1, FastEthernet2 and FastEthernet3 but after a few seconds all ports were disabled but my DSL seemed to be working.
So I took back the router home to check it. I managed (I think) to make a factory reset using a serial terminal and following the procedure described here [URL]
Since I did the reset, I thought I would be able to re-use Cisco Configuration Assistant (3.1) to re-configure the router (I am very bad at using the command lines) but I am unable to connect to the router using the supposed default IP : 92.168.75.1 (I set my computer to use 192.168.75.50 IP adress with mask 255.255.255.0). But I can't connect to the router ... even if the Ethernet ports seem to work because green light is on when plugging my cable. connect to my router using CCA ?
For more information, here is what I get when I run "show startup-config" and "show running-config" in terminal console. I guess the objective is to make the startup-config beeing the running-config, but I have no idea on how to do that ..
show startup-config
show running-config
Router#show startup-config
[Code]......
Cisco Routers :: Total Failure To Get SR520-ADSL-K9 To Connect To ISP
Dec 15, 2011We've (an independent school) just bought an SR520 with a view to replacing one of our Draytek 2820s. We need to set up some site-to-site VPN with NAT and the Drayteks won't do it.
I've been trying to configure the SR520 in just the most basic fashion using CCA (3.1) and the CLI but with no success. I can't get a PPP connection with our ISP.
I've tried following the instructions in the software config pdf and also tried replicating the various 'running configs' reported in other posts in this forum to allow connection to a UK ISP, with no success. I don't know how many times I've reset the poor thing to factory defaults.
I have to say that I'm dismayed at how flaky the CCA appears to be. Many of the things I've tried with it simply don't work and often end up in it hanging. Close to useless in my view.
So instead I've tried to use the CLI which seems a lot more solid but is somewhat impenetrable and there's precious little by way of supporting explanation.