Cisco Wireless :: WAP321 - Clients Connected To Single Access Point?
Oct 15, 2012How many wireless clients can connect to a single WAP321 Access Point?
View 2 Replies
ADVERTISEMENT
Most Wireless Clients Associate To One Access Point?
Feb 23, 2011most of my wireless clients are associating to one ap when there are ap's closer. do i have some setting configured wrong on my controllers?
View 1 Replies View RelatedCisco Wireless :: WAP321 - SNMP OID To Obtain Associated Clients For Each Of SSID
Aug 23, 2012I just got a WAP321 to replace a very frustrating WAP4410, what is the the SNMP OID to obtain associated wireless clients for each of the SSIDs ? I'd be happy with any OID for client numbers so total clients associated will be fine.
View 6 Replies View RelatedCisco Wireless :: 1142 - Maximum Recommended Clients Per Access Point?
Jan 24, 2013We are about to upgrade our training facilities wireless and i have a few questions regarding the number of active clients we should target our design for.
We would be using 1142 and 3502I access points. I was thinking that based on the belo we'd be able to support around 30-40 clients per AP.
Protocol
Type of web use
Amount of bandwidth allocated per device
[Code]....
Cisco Wireless :: 2500 / 5500 - Wireless Access Point Identification By Clients
Apr 30, 2012We have recently been given this unusual task. The setup is a series of CAP3502P access points, and a wireless controller (either 2500 Series or 5500 Series), as well as other standard network infrastructure.
In this network, the client (mobile/wireless) devices must be able to detect when they change what access point they are communicating through, while also requiring a seamless transition. Ie, if the client device is communicating via access point A, and displaying the application menus for A, when the user walks to the area services by access point B, it must detect that sot he application can display menus for B, without the user having to select "B".
Is there a way for the client device to detect which access point it is using and provide that to an application? Or alternatively a way for a host service residing on a server to get that information from the wireless controller?
Cisco Wireless :: Can Access Point AP541N Connect To Wireless Clients
Aug 10, 2010Can the access point AP541N connect to wireless clients with 802.11g/a simultaneously?
View 1 Replies View RelatedLinksys Access Point :: Where I Can See Clients Associated To A WAP200E
Nov 7, 2011Because of a connection problem, I would like to know where I can see the clients associated to a WAP200E AP and the signal level of each client.
View 1 Replies View RelatedCisco :: AP1240 / Clients Cannot Connect To Access Point
Apr 9, 2013I have a AP1240 Cisco IOS Software, C1240 Software (C1240-K9W7-M), Version 12.4(10b)JDA3, RELEASE SOFTWARE (fc1), and want to configuration WPA2 without using Radius.But my clients can not connecto to AP. On AP always display messages "%DOT11-7-AUTH_FAILED: Station 0026.6609.e55d Authentication failed"
Here is my configuration:
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname AC1P1F08
[code]......
Linksys Access Point :: WAP610N No Devices Connected To Wireless
Jul 21, 2011I have a big house so I have a e4200 on one end of the house upstairs and the WAP610n on the other end downstairs linked via CA6. I am having no issues with Laptops etc..just with Apple devices. I spent a lot of time with chat support (waste of time). WAP was flashed with latest firmware via hard wire no devices connected to wireless, has same ssid and security settings as router running on 2.4 ghz wpa2 personal AES. I am using 2.4 due to iphone4 does not support 5ghz and wap does not support dual band (another bummer). I am using AES instead of TKIP/AES mixed mode due to apple devices will not acquire dhcp with this setting and if they do they lose it right away. I have tried everything imaginable with the settings even changed beacon to 75, 50 RTS to 2304 etc...the current setting are the only ones that seem to work the best however when i run speedtest.net LA server or SD server the performance is horrible. On windows laptop i can achieve 27mbps down 2.5mbpsup, my apple devices use to achieve very close numbers to that on a simple configuration with two Dlink DGL-4300's one as router one as AP (G mode). So two major issues i have noticed is WAP610N has issues passing DHCP to apple devices and has extremely poor performance. So my question is will there be a firmware to correct this issue or a new hardware version that i can exchange this for if I RMA it or would it be best to call it a day and just get a E3200 and use it as a real simultaneous dual band AP???
View 9 Replies View RelatedCisco Wireless :: 1552E - Sensor Connected To Mesh Access Point
Jan 21, 2013A 1552E has a temperature gauge sensor connected to its power over Ethernet port. the port status shows line protocol as down.The cable from 1552 to the sensor has been changed twice. We can see the 1552E gig1 interface is at 1000full duplex. Is there any chance the speed is causing the problem here. it seems the 1552E doesn't allow to set different speed & remains on 1000.
View 2 Replies View RelatedCisco 870 / Aeronet 1180 - DHCP Information Not Being Sent To Access Point Clients
Oct 3, 2011I have a Cisco 870 integrated service router and 3 Cisco Aeronet 1180 Access Points.I have configured the router to act as a DHCP server. with all four /26 subnets in a seperate address pool.the first one is for the routers wireless interface and works fine.but the other 3 are for each of the wireless access points, that are used for internet access, but have to operate independently (i.e. the clients on each must not be able to access anything other than the devices associated with that access point and the internet.
The problem I are having is that the router doesnt distribute DHCP information via the access points so the clients on all the access points are not recieving any internet connection at all, but are connecting to the access points, and the LED for the access points suggest that they are connected t the router, the router accnowledges their existence but is not transmitting through the fast ethernet switch ports. but is communicating with a wired printer that is associated with the wireless vlan.
Each access point is on its own vlan, and the switchport access vlan command has been used. only the five static addresses have been excluded from the address pool. the router, the three access points and the printer adresses are static. the printer is working despite being the only device on the /24 network all other addresses are on the /26 networks. this to my knowledge shouldent work but it does, which is handy because the printer software doent support subnetting.The simulation I have ran say that only the printer shouldent work, but its the access points that are not working how they should. I have studied the configuration of the router and access points, and came up empty on why they are not recieving DHCP information.
I are not even able to telnet to them, despite having an address setup. I have not set up a routing protool on the router due to it being the only router. I have checked the interfaces fa0 to fa3 and they are line up protocol up, the wireless is line up protcol up, the vlans are line up protocol down, except the one asociated with the wireless which is line up protocol up (I believe the protocol only goes up when a device is connected to it).
Cisco :: Use Access Point 1242 To Do Clients Location Using WLC 5008 / NCS 1.1 / MSE3310
Dec 2, 2012Can I use the access point 1242 to do clients location using WLC 5008, NCS 1.1 and MSE3310?On this moment I doesn´t need of CleanAir features. I want just to do location for clients and rogue aps.
View 2 Replies View RelatedLinksys Wireless Router :: E2000 Connected To RVS4000 As Access Point
Feb 26, 2012I use a E2000 as a wireless access point to the Internet, by connecting the LAN of the E2000 (set for x.x.x.5) to the LAN of an RVS4000 (Set for x.x.x.1). The E2000 is set for Automatic Configuration, and everything works fine..... Until a power failure occurs... Then, after everything boots up again.. I get the "NO INTERNET" prompt on the wireless....
By using Ping Plotter, from a computer on wireless end, and another computer with Ping Plotter on the wired side of the x.x.x.1 LAN, I've determined that it's the E2000 that has disconnected from the RVS4000.
I have found a work-around, though....No matter How the setting boots up, If I toggle away from and then BACK TO: NAT DISABLED in Advanced Routing, Everything is back operational..... Until the next Power Failure....
Is there any way of making this Automatic.
In another forum, there was a suggestion of putting the E2000 in Bridge mode in WAN settings... I can't find it....
Belkin Routers :: N300 Wireless Bridges Be Connected To Same Access Point
Nov 21, 2012Can 2 N300 wireless bridges be connected to the same wireless access point ?
View 1 Replies View RelatedLinksys Wired Router :: RV042 VPN Can't Access Connected Clients
Jun 23, 2012I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can't access clients which are connected to router. I have added rules also in firewall.
View 1 Replies View RelatedLAN Disconnecting After Access Point Is Connected
Dec 15, 2011I connect a wireless access point to our network and within 10-15 minutes any wired LAN users internet connection goes down, yet the wireless internet works fine.
Here is how our small business network is setup:
1. We have a Server 2000 that serves as our companies domain controller and DHCP (I know, I know..dated). We also have another server on our network, which is a Server 2003, which is primarily a backup domain to our Server 2000 and hosts Quickbooks that our employees use and a small intranet website via ISS. We are connected to a router from our ISP with a gateway IP of 192.168.1.2. Our ip address structure is 192.168.1.xxx and subnet is 255.255.255.0.
2. I have configured the AP to be just that, an access point to broadcast wirelessly and made sure that DHCP is turned off on the router. I set it to a static ip of 192.168.1.215 and subnet of 255.255.255.0 and our default gateway of 192.168.1.2. Once I connect it, everything works fine for about 20-30 minutes, then our LAN internet goes down. The Wireless G access point that I am using is a TP-Link Model TL-WA501G.
My question is, how does the WAP know that our server is the DHCP? And are the wired LAN people getting disconnected because of a DHCP fighting issue between the WAP and our server 2000? I'm not a network engineer but know enough, but this problem is really baffling me.
WRT54gl / N Access Point Connected To G Router
Jul 16, 2013Any issues connecting an N access point via an ethernet cable to a G router?I currently have a wrt54gl router in one room (where it's connected by cables to various devices). I'm usually in another room and connect via wifi with other devices. Internet speeds over wifi are fine, but speeds are too slow when transferring files from wifi devices to other computers (windows file sharing).
I'm thinking of running a cable through a wall from the wrt54gl room to the other room and connecting a small N router, in access point mode. I'd then connect to the N access point and, through it, to the main router and other devices in the network.All wifi devices can run N.
Are there any issues in doing this? Anything I should know about configuring this? From other questions, it's not clear if I should use the same SSID for both routers. For that matter, should I turn off wifi on the wrt54gl?
Cisco Wireless :: 3502p - Access Point Support MESH And Point-to-Point Bridging?
Apr 16, 2013I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?
View 6 Replies View RelatedD-Link DIR-600 :: Access Point Via Laptop Connected To WLAN?
Dec 31, 2011my network isn't the most optimal at the moment. Starting from the router, it's a Thomson TG789vn my roommate has set up in his room. The service is DSL. I've connected my laptop to said WLAN from which I connect my access point turned DIR-600 to the internet and share it to my PC and Xbox 360.It works pretty well most of the time with 28 ping to a ~150 miles far server, yet sometimes I lose connection overall, or partly. For example, the Battlefield 3 beta stays connected to the internet while 3 different browsers are unable to load a single page. It seems like ongoing connection are unaffected while new ones don't work. The problem is usually fixed in a few seconds when I disconnect and reconnect the WLAN on my laptop.
View 1 Replies View RelatedD-Link DIR-600 :: Access Point Via Laptop Connected To WLAN
Oct 5, 2011As the title might suggest, my network isn't the most optimal at the moment. Starting from the router, it's a Thomson TG789vn my roommate has set up in his room. The service is DSL. I've connected my laptop to said WLAN from which I connect my access point turned DIR-600 to the internet and share it to my PC and Xbox 360.
It works pretty well most of the time with 28 ping to a ~150 miles far server, yet sometimes I lose connection overall, or partly. For example, the Battlefield 3 beta stays connected to the internet while 3 different browsers are unable to load a single page. It seems like ongoing connection are unaffected while new ones don't work. The problem is usually fixed in a few seconds when I disconnect and reconnect the WLAN on my laptop.So yeah, it's not pretty but I have to work with what's available. I'm actually surprised it even works this well. how to optimize the whole thing or how to fix the partial lack of connectivity?
Dell 170L / Connected To The Access Point But The Internet Cannot Be Found
Nov 6, 2012i have
dell 170L (old but very stable)
winxp/pro
linksys wusb54gs adaptor
installed the software and i get the "connected to the access point (very strong signal) but the internet cannot be found"this was working for quite some time and i shut the system down for quite a while before needing to set it up again.
Linksys Access Point :: View Connected Devices On WAP610N?
Jan 17, 2012Is there a way to view the connected devices on the WAP610N?
View 3 Replies View RelatedCisco Wireless :: Point To Point Access Point 1262 Bridging
Feb 27, 2013How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.
View 12 Replies View RelatedCisco Wireless :: WAP321 Don't Have Guest Access
Oct 11, 2012It's my intention optimize our business WiFi network.Actually we don't have a "Guest" access.Probably WAP321 should be the best solution for us.We will need 3 WAP321 to cover offices area.I have different questions/doubts about Captive Portal functionality.using 3 different WAP321 everyone has the "captive portal" feature, or you can configure only one of the three the feature of "captive portal"?if is possible to configure only one of three the feature of "captive portal", the others WAP321 trusting the authentication?what is the ip address released from the "Captive Portal"?all Guest user have the same username and password?
View 1 Replies View RelatedMultiple Clients On Single Server?
Mar 30, 2012I just want to keep one PC as a server and one switch connect to it (For LAN). I want to connect multiple client/screen to that server, so I can use single servers for multiple screen/client.(Client machine will not have any CPU, they will utilize servers memory.)
View 1 Replies View RelatedLinksys Access Point :: WAP54g Repeater Showing As Device But Is Not Connected
Jan 28, 2012I have a WAP54g set up as a repeater. It even shows in the WRT54g device list (Tomato firmware) as a WDS interface but nothing can connect to it. I have the repeater's MAC address in the AP and it's set to "Access Point + WDS" mode. I don't know what I could be doing wrong. Is it a conflict of DHCP on the AP vs static on the repeater?
View 1 Replies View RelatedCisco Wireless :: WAP321 - How To Limit Access To Two IP Address Via ACL
Aug 29, 2012I need to limit access to two ip address via acl but when i add them to the list i lose access to internet.
View 1 Replies View RelatedCisco Wireless :: 2504 - Redundant NCS Server Connected To Single WLC
Apr 15, 2013I have a customer who has 2 NCS servers; 1 residing at their corporate site and the other residing at their local site. They have a WLC2504 controller at the local site. They would like to connect both ncs servers to to the local WLC. Is it possible to connect 2 ncs servers to a single controller? Can WLC configuration databases on two different NCSs be the same? How can you prevent 1 NCS from overwritting the other?
View 5 Replies View RelatedCisco Wireless :: Upgrading 1042 Access Point To Lightweight Access Point
Apr 20, 2012I had a new AIR-AP1042N-N-K9 access point and I tried to convert it into lightweight mode with the image c1140-rcvk9w8-tar.124-21a.JA2.tar . I used all the methods but the AP is getting hanged at one position after decompressing the new IOS. The capture of the process is below: [code] After this I am getting the junk characters and everytime AP hangs at this position.
View 4 Replies View RelatedLinksys Wired Router :: RV042 Can Access Clients Which Are Connected To Router
Jun 23, 2012I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can access clients which are connected to router. I have added rules also in firewall.
View 1 Replies View RelatedCisco Wireless :: Set WLC 5508 To Allow Single Web-authentication User Account To Get Connected?
Aug 12, 2011how to set WLC 5508 to allow single create web authentication user account to get connected in a same time. i found that i can use the same username and password combo to be login in 2 machine in the same time.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 Set For Single Guest But More Than One Connected?
Jul 14, 2011I tried searching through the threads but didn't see anything on this. Recently bought the E4200 so that when guests come by they can use a separate network instead of mine. I have guest network set up for one user but I am able to connect more than one computer to the guest network.
View 9 Replies View RelatedCisco Wireless :: SG200-26p / RV042g - Set Up Internet Guest Access WAP321?
Jul 3, 2012I want to set up internet guest access with my wap321. No matter what I do the guest can see my whole network. Not sure what your definition of guest access is but letting them brows around my assets is not mine. I have a cheap Linksys router at home and that guest access works the way I want this AP to do.No wizards for guest access... In fact there is only one wizard by the way, i.e. basic set up.
My network includes the wap321, sg200-26p switch and the rv042g router