I am having trouble with my desktop......i keep getting the problem after a few hours days or weeks. i live in pakistan and am using evo a wirless usb internet offered by ptcl...today in the morning the computer worked fine but now when i try to connect the usb and try to turn the internet on the computer becomes dead slow and as i take out the internet it becomes totally fine....this keeps hanging with me again and again and i really need the internet to play gta samp
My desktop computer hangs when i use internet linked software like Mozilla and internet explorer. When i got hang i can't do anything but to press the restart on my CPU. But i can access only in Yahoo messenger and skype. It's really weird, I've been using it for a long time but i just only encountered it now. I tried to use my computer in safe mode with networking and it all worked! but why isn't it working in my normal mode. it's so hard
I have 20 to 100 Mbps(FTTH) line at home. I am planning to put few servers online to serve web pages. I have tried them taking online with normal home dsl routers, but router hangs very frequently.
I have here a HP Pavilion g6 running Windows 7 with quite a strange issue. Once the wireless is turned on common programs e.g. Microsoft Word, Internet Explorer etc. stop responding. What I've tried:Scanning for viruses with Malwarebytes - None found Reinstalling the wireless driver Refreshing the network stack?
My PC boots fine (via SSD) but as soon as it passes the login screen and brings me to the desktop, the network connection icon has a circle going around it for about 30 seconds. Except the circle isnt moving, or rotating as if it's frozen and when i click on it to go into the network and sharing settings, it hangs. While this happens i can access anything else fine except internet based apps. Once it connects, everything is normal.
I use a Netgear Power line Adapter and have been for years, and have never had a problem with it. I am running Windows 7 Enterprise 64 bit.
I have a WAP321. The unit hangs about on every day. Web interface and WLAN let not respond anymore. By a reset the unit will be back. I have put all unnecessary stale. Tracing the turned on, I can say nothing flashy.
Any issues on Cisco ISR / ISR G2 routers running 15.x code while doing NAT for large quantities of users (3000+) involving lock ups? This seems to be an ongoing issue for a customer. The symtom is present on 2811, 2911 and a 3945. The 3945 never spikes over 10% processor or memory utilization, yet still has these issues. The routers have been tested running 15.0(1)M5, 15.0(1)M7 and 15.1(4)M4 which all showed simular results. Other router side services are running such as NetFlow v9 to two destinations. Another interesting symtom, doing a "show ip nat translations" command will crash the router if executed at its peak usage period. NAT is to a single IP (sourced from outside interface), not a pool.
i have here an cisco 881 router which has been in service for about 3/4 year now.yesterday the device from one moment to an other stoped working the device does not respond on console, it does not boot (or seems to be booting) and is also not responsive on the reset hole.
powercycle has been attempted but without result. the only evidence that it is alive is the FA leds. they are all constant on.
I'm running Win7 and have recently had problems at startup. Initially I thought this was a Skype issue as removing it seemed to work, but alas the problem remains with it uninstalled. The PC boots ok and I can open programs quickly enough, but if they need internet access they hang for 5mins or so before the block clears and all is well. I have recently changed ISP provider to BT Broadband (UK) and have a new router which sets itself up and had been working fine.
I'm trying to figure out what's wrong in a LAN having 70 computers.There are three routers in the same subnet with three switches (kinda crappy). DHCPs are off.The problem is that randomly the routers are losing their configurations or the network hangs a lot. There is no problem in the routers (tested many times).The thing is that when i start packet sniffing over the network using wireshark there's a big flood (over 10.000 packets in a sec) coming in a internal ip inside the network ex. 192.168.1.60.Next thing is that when one of the routers shuts down manually, the other one is losing it's config. Today, when i went to check 192.168.1.60 i saw the power plug was not connected, when i re-plugged it the flood was gone. (the computer was turned off).I enabled SPIs / firewalls in all of the three routers and there is no problem yet.
I was working as IT Support in an encoding company. I support over 500 desktop users. my problem is about in entire network because i always encounter hang network in my grave yard shift. Our network system set up have domain server, antivirus server, database server, 4 PC's use as backup servers and 3 unit of network attached storage and approximately 500 units of desktop use for production in encoding. I always experiencing network hanging then after all system will be freeze, so i suggest to shutdown all pc for usually in 5mins then turn on again. In an hour the problem is still exist again and again. I did all possible way to make the production smooth run for my whole shift but still after some hours it occurs again. I dont know what would be the possible reason why the network hangs and stuck up. The network attached storage did not reach the entire capacity, the antivirus server is still updated, the domain and database server are working properly even the PC's use as backup server. There is no internet connection we use in production, so i assure that no virus we encounter in all pc. Is it the cabling? or is it the switches?
I have a cisco router 1811 when powered displays the output below then it hangs at that point.
System Bootstrap, Version 12.3(8r)YH8, RELEASE SOFTWARE (fc2) Technical Support: [URL] Copyright (c) 2006 by cisco Systems, Inc. C1800 platform with 393216 Kbytes of main memory with parity disabled
Few months back I had purchased this Router. But I did not use it till last week. Since the time I have installed it, it does freeze often (between 5 to 30 hours).
I can connect to devices within the subnet, but not elswhere. I have to remove the power and plug it back for it to respond. I have updated the firmware to the latest one that was on the Cisco site.
I am running a 1921 with 15.0(1)M4 on it. The router has a /29 public block assigned to it so I have a public IP for my router's GW, a public IP for the WAN interface on the router, a public IP for PAT and the three remaining public IPs I use them as static NATs for internal hosts.
My problem is that the particular static NAT assigned to static host1 seems to "hang" every few days. You can ping the public IP and it will respond but the rest of the services of the host like www, ftp and telnet do not respond. If I reboot the router then all services of host1 will work again. Note that all other static IPs including the ones used for static host2, host3 and PAT will always work and never give any problems.
I am fairly certain that this is not a config problem so I have shuffled around the public-to-private NAT entries. Basically whatever public IP I assign to this host1 will at some point hang. The host2, host3 and PAT always work and never hang no matter what public IP I issue to them.
So since it isn't a problem with the public IP I changed the private IP of host1 and still it hung!! This host1 happens to be a linux box. host2 and host3 are a Windows server and a different flavor linux if that make some kind of difference.
As i'm facing the issue with Cisco CSC module installed on ASA 5510, It hangs up and doesnt work sometime, so it is bypassing all the traffic without inspection through CSC module. After restarting ASA 5510 box, it works fine as it used to work. Now, My question is how can i refresh the module again without interrupting the ASA box/ and how can i avoid this problem forever? Because i cant interrupt the daily work due to this module problem by restarting the box again and again.
Two years ago, a lightning strike fried my ADSL router and LAN port on the motherboard (ASUS A7V8X-X) of my now very old system. After that, I bought a Wi-Fi USB adapter (AirLive WL1600-USB) and disabled the fried LAN port. Since that moment, my computer kept freezing totally randomly for the past two years - it didn't matter whether I run a dozen of programs or simply leave the system alone. First I didn't know what's causing those freezes, until a week ago. You see, we were forced to cancel our ADSL account for four months, so I haven't used that Wi-Fi adapter for the entire summer (I disconnected it and uninstalled its drivers). During that time - not a single freeze for four months, no matter how great the system load or temperature. A couple of weeks ago, we activated our ADSL account again, so I plugged the Wi-Fi adapter in and installed its drivers - and the freezes started again.
I have a wi fi sky adapter,and when i plug it in,it says installing driver software. But..then it just hangs there,and eventually leads to-driver was not sucessfully installed(that is when i plug it out,but i waited more than an hour before that)I tried uninstaling and updating the driver for it,but it didnt worked.When i tried to uninstal the driver,again it just hanged.That is untill i unpluged the adapter..I have manually downloaded the latest driver,and when i check in properties it says that device is working properly.
When I try and copy files from my Windows 7 Home PC to my Windows Server 2003 share, it copies so much then hangs the Server sharing. It then appears that the share has disappeared. If I copy from the Server 2003 to 7, it copies fine, and copying from XP to 2003 also works fine. I had a chat with a colleague who told me that he has the same problem copying from Vista to XP.
I have an E3000 working as a wireless and wired router and 1 portable connected over Wireless-N
I recently upgraded from a Linksys WRT54GS. I had not problems with the WRT54GS but I needed the gigabit router and 5Ghz N-band. Ever since I upgraded I am experiencing constant pauses or hangs for about 1-3 seconds between the LAN traffic to the portable machines and vice versa.
Cli/ssh is fine, but the ASDM on Win8 64 bit seems to constantly have issues. Sometimes it works fine, other times it hangs at "Software update completed" or at a weird percentage and then never opens. I have noticed that disabling my Trend Micro realtime a/v scanner aids, but still doesn't completely fix the issue every time. speed it up or at least make it work every time?
Rev B, recently updated firmware to 2.10NA hoping to resolve the problem.WIFI is disabled.DHCP is disabled (I run a SBS 2008 server, but for testing i static ally assigned IP info on my test PC and disconnected all other systems including the server).Before updating the firmware, the router would hang for a couple minutes and then be OK for some random period, usually more than a few hours. After updating and resetting to factory defaults, I'm now lucky to get ten minutes of service before it hangs. The "globe" light goes out, blinks yellow and then within 20 seconds or so, goes out for good. At that point I can't even connect to the router's admin login page. I either have to power cycle the router OR the cable modem. I have confirmed it's the 655 by reconnecting my old (and I guess more trusty Linksys WRT54G. Same settings, same WAN MAC and WAN IP, no problems after many hours.
Region : India Model : TD-W8968 Hardware Version : V1 Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n ISP : BSNL
I Bought this w8968 a month back.. It was working alright till a few days back. When i connect and start browsing or downloading, it goes OK.. but after a few hours(sometimes 2, sometimes 1), It stops responding and I couldn`t ping 192.168.1.1 either through WiFi/Ethernet. Status indicators for DSL/WIFI/Internet/LAN all glowing as though nothing wrong with them..? The router is not that much hot when this happens.. When i switch off the router and then on, The Prob gets solved only to reappear again in 1/2/3 hrs..
Have been trying for the past two days to install a new E4200. It gets to 25% in the setup and then errors out and says I need to contact customer service.
Connecting through a brand new DSL modem that I know works as I can get access through my old router.
My PC (Windows 7) is directly connected to the router. I got to the point where I named the router in the install process the first time, but then it hung.
Have tried to use the CD to re-setup with no success. I've tried the hard reset holding in the button for 10 seconds and unplugging but nothing has changed.
I have a simple ASA, ACS, AD schema for RA VPN authentication. All is working for a few months now, but since the initial deployment we have this connectivty issue regarding ACS and MS AD. At random intervals, 1 month/1 week, the ACS connection status becomes "DISCONNECTED" although the CLI shows that ad client is running. But because of that, no RA VPNs can be authenticated. Clock is not a problem, since it didn't change automatically nor was manually configured prior to the malfunction.
My team has installed a 1905 series router at one of our offices. It has been connected through lease line to our servers at our head quarters. When we start internet access it slows down and subsequently it hangs. When we log into the router and start verifying its configuration it hangs after some time. We have replaced the router but the other router is also behaving in the same way. the possible areas and settings I should look into including lease line connectivity.
i have a cisco router 7206 ,when i create subinterface with ip , the router hangs , and all interfaces are down ,i just remove interface gi0/1 and plug it again, what is the relaiton between subinterfaces and hanging routers> the problem occurred when i configured sub-interface on GI0/2. [code]
We are using router RV042 since last three it's working fine with single broadband connection but when we are using as a load balance it will hanged three or four time in a single day. I have updated firmware also but still my problem is not resolved
Below is my router detail. CPU: Intel IXP425-266 Firmware version : 1.3.12.19-tm (Feb 13 2009 13:03:21) DRAM : 32M Flash : 8M
Latest firmware is v4.1.1.01-sp.bin but it will required v3 hardware, I don't know how to check hardware version.
the inside interface on our primary ASA seemed to "hang". It dropped all the packets it received. Because the interface didnt go down, failover didn't happen. Device's info;
-Cisco Adaptive Security Appliance Software Version 8.2(3) -Device Manager Version 6.3(3) -Hardware: ASA5550, 4096 MB RAM, CPU Pentium 4 3000 MHz -Internal ATA Compact Flash, 256MB -BIOS Flash Firmware Hub @ 0xffe00000, 1024KB
I attached a capture picture shows that traffic didnt go to the roof when the issue happened. Why the interface would "freeze" randomly?
When I try to boot my ASA5550 it hangs at "booting system please wait". I have tried to reseting the ASA but this doesn't work. what to try as I cannot get to the rommon.
