DAP-2553 - Locating A Transparently Bridge AP?
Mar 19, 2012
I have a D-Link DAP-2553 AP which I *believe* I transparently bridged over a year ago into our network. The good part is the AP works fantastic - I use it everyday on my laptop! I've had 0 hiccups - but what I need to do now is I'd like to make a guest network available for visitors here.
Tried getting some of the management tools from D-Link but i'm not having any luck finding the IP. Our gateway here is 10.10.0.1 and when i connect to the AP and do a tracert my first hop is still 10.10.0.1.what I can do to manage this thing besides just hitting the reset button and reconfiguring?
View 2 Replies
ADVERTISEMENT
Sep 8, 2012
Where is located my own network security key?
View 1 Replies
View Related
Nov 17, 2012
I'm trying to setup my HP wireless printer and it is asking for WEP Key and I haven't a clue. This is a home computer. I have a U-verse router.
View 2 Replies
View Related
May 16, 2011
that big network has DHCP server which give ip addresses to clients and manage their internet.in one of this companies because of security matters they set up a domain network for themselves .problem is this if they use main DHCP their systems get ip in form of 172.16.58.x and boot up slowly it takes about 3 min to network indicator appears near clock and also they get into problem when ever they want to add a shared printer.but if they get ip address from DHCP and set that ip address and subnet mast and gateway manually the same as main DHCP server and only change dns server to theirs DC controller ip address every thing will work properly .but problem is they must set their ip addresses automatically.that is DHCP ip address sample
172.16.58.23
255.255.255.0
172.16.58.1
dns=172.16.1.1 & 172.16.1.2
see 172.16.58 is ip range of this company on that big network
View 2 Replies
View Related
Jan 20, 2012
I just purchased a befsr41. i have wireless internet so there is no modem to plug into. when i try to setup wizard it gets all the way to checking computer staus, then at 99% it says it cannot find router. i have pinged the router following the instructions on this site and the computer found the router, but when i tryed to go to browser to go to site it won't let me on any pages. i have found that while router is plugged in i can't access internet, but the set up disc can't locate the router. why wouldn't the set up wizard find router? and i am using win 7 with xp capable.
View 3 Replies
View Related
Apr 28, 2013
I have inherited a custome with a bunch of SG300's in their LAN room and one out in the warehouse.I need to setup a VLAN and the genius before me did not label which LAN room switch the warehouse unit plugs into. Is there a tool/method I can use to find which switch, and port this warehouse switch is connected to?
View 2 Replies
View Related
Apr 24, 2012
Can I associate the non-root bridge model 1310 to the root bridge model 1400? Is there any problems on the configuration I need to be aware of?
View 7 Replies
View Related
May 17, 2012
Telus cell phone usb connection and a Lan ethernet connection, was trying to use windows 7 to bridge the two networks.
View 6 Replies
View Related
Feb 22, 2012
I have a new internet connection. It is displaying lights for DSL, PWR, INET, WLAN.I can connect but it always reads the message "No Internet Access"I went to the service provider to get this fixed. And they created bridge mode through LAN so I could connect using a username and password. (create a new connection > broadband ). But I innocently pressed reset button. I don't want to go back to the service provider to setup the bridge mode or ability to connect by a username/password through LAN.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5750 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3070 Mb
Graphics Card: NVIDIA GeForce 8400M GS, 256 Mb
Hard Drives: C: Total - 125633 MB, Free - 9275 MB; D: Total - 102547 MB, Free - 30795 MB; E: Total - 10291 MB, Free - 2701 MB;
Motherboard: Quanta, 30D2
Antivirus: Microsoft Security Essentials, Updated and Enabled
View 3 Replies
View Related
Dec 19, 2012
So I have an RV120W as my "main router" but I can't get a wire into the garage to get a couple of computers in there access to the internet / LAN. I have a WCG200 cable gateway at my disposal, with a built in 4port switch and wondered if I can configure it's WLAN to connecto the RV120W SSID and use wireless as my link between my garage network and the rest of the house LAN? WCG200 isn't going to connect at blinding speeds, which I'm ok with, I just wanted to know if it's possible?
View 3 Replies
View Related
Oct 2, 2012
if I want to bridge between 2 VLANs ,can I use IRB like I would use in a router for bridging to ethernet interfaces for example?
Config example:
bridge irb
interface vlan 10
ip address 192.168.10.1 255.255.255.0
bridge-group 1
[code].....
View 10 Replies
View Related
May 4, 2011
I already know how to bridge the lan and wifi connection so I can plug in an ethernet cable from the laptop to my desktop and get internet that way, but is there a way to actually turn the laptop into a router when it's connected to the router, wirelessly? I tried using ad hoc but it looks like that only works if I'm directly connected to the router.
View 5 Replies
View Related
Oct 2, 2012
I'm trying to share an internet connection from one laptop to another laptop but not allowed to do this wirelessly. I only have 1 ethernet port in my room. So I was wondering is it possible to plug laptop #1 into the ethernet port then bridge this connection via a usb to lan adapter.
View 1 Replies
View Related
Jun 23, 2012
i am using windows XP and i want to make my laptop spread wifi signal, well, i don't know how to describe, English is not my language,hope you don't mind, some sort of input in wire network, output is wifi, i follow the instruction: Open Start-Run- ncpa.cpl - Enter Right click LAN and Wireless network icons, click Bridge Connections. Appear Network Bridge icon in Network Connections. Right click Wireless Network icon, Properties, click Advanced. Tick "Computer to Computer..." and "Automatically...." then Close. Back to Wireless Network Connection Properties, click Add. + Network name (SSID): abc + Network Authentication: Shared + Untick "The key is provided....." +Type password (5 characters) Click tab Connection, tick "Connect when this...", Done. Open Network Connection, right click Wireless network icon, click View Available Wireless Networks So far so fine, i can see my ad hoc network, but the problem is i can not connect to it, i click that network, click Connect, type the password, then it shows the connecting window in about 4 mins and then disappear and i am back to part "Cick View Available Wireless Networks"
View 14 Replies
View Related
Feb 6, 2012
How to set the WNR2000v3 into Bridge Mode. I can not find instructions on it in the user manual or the NetGear website. And Google.com has turned up not valuable results either.
I have the WRN2000v3 plugged into another router via Ethernet. I basically want to "dumb down' the WNR2000v3 into a basic Ethernet switch.
View 5 Replies
View Related
Jan 2, 2011
how use wrt54g v3 bridge mode
View 2 Replies
View Related
Dec 24, 2011
Can this router be set up as a wireless bridge?
View 1 Replies
View Related
Apr 27, 2011
How do I convert an old WRT 54G 2 to a wireless bridge.
View 1 Replies
View Related
Jan 17, 2011
I need to figure out a network setup for my house between modem connected to one wireless bridge connected to another wireless router connected to wired router.The reason why I decided to make this evil setup is due to insufficient range between my wireless router and desktop pc upstairs. However, in the room next to it I have a very good wireless signal and a possibility to bridge it to wired network installed in my house. But in order to do it I guess I need to bridge that wireless signal via wireless router or bridge to wired network. [code]
View 7 Replies
View Related
Aug 1, 2011
I have a bluray player that I want to get internet to that is downstairs. I would like to use my old Linksys WRT54g ver 2 router to do this. I just put DD-WRT firmware on it. I have a Linksys E1000 as my primary router. All I want to do is be able to to put the Secondary router (WRT54G) downstairs near the bluray player and run an ethernet cable from the lan port on the router to the ethernet port on the bluray player to get internet access. What is the best way to do this? Client bridge or Client mode?
View 2 Replies
View Related
Mar 6, 2012
How to bridge one router to another wireless linksys router?
View 1 Replies
View Related
Jul 24, 2012
I have 2 routers and would like to create a wireless bridge/repeater between them so i can extend my wifi range. Is it possible to do this? and How would I do it.
Router 1: Aztech hw 550-3g
Router 2-Link DWR-113 3g
View -1 Replies
View Related
Jan 14, 2012
I was just wondering how to wirelessly bridge 2 routers so that I don't have to drill a big hole through the wall!! I have a netcomm router which is going to be the receiving modem and a net gear modem to transmit the wifi.
View 1 Replies
View Related
Apr 4, 2011
I've been going mad plugging in wireless dongles, plugging/unplugging ethernet cords into different nics on my vista computer trying to connect my xbox 360 to the internet through it and now my main nic isn't assigned an ip address from my router... I failed at the xbox 360 ics/bridge but do remember an error message about ip conflicts
View 7 Replies
View Related
Feb 28, 2011
how can i configure my wireless access point to receive internet connection from Wireless tours
View 1 Replies
View Related
Sep 2, 2012
I have a laptop with a wireless adapter. I have a desktop without a wireless adapter. Both of these pc's have windows 7. I have the laptop and desktop connected by an ethernet cord, and the laptop has a wireless connection to the router. In Network Connections under the control panel, I used the Bridge Connections option to bridge the pc's together.At my friend's place, this is usually the end of this process as my desktop will have internet access and run fine. At my own place, however, the desktop will not have any internet until I set a static IP for it. Also at my place, games on the desktop tend to run with a lot of lag due to the internet.
- My friend has a cheap $30 ASUS router, i don't know the exact model of it atm
- My place uses a motorola sbg 6580 modem/router
View 1 Replies
View Related
Jun 30, 2011
Main modem router is DG834N (upstairs), and I need to connect my Ethernet enabled amp/receiver, and it is not practical to run a cat5 cable to the amp?
View 4 Replies
View Related
Feb 14, 2013
Is it possible to use a cisco router, in this case a cisco 887, to bridge an external ip address to a device behind the router? I need this because i only get 1 IP Address from my ISP and i want this IP address on my ASA.
I was thinking of a bridge group, but i'm not sure how to go about it! I would like to know if this is possible, and if this is, how should i configure it.
ISP
|
Router (ATM)
|
ASA (external ip(NAT))
|
Local Network
View 6 Replies
View Related
Feb 6, 2012
I have 2 Cisco 877 routers and I need one set to bridge mode and one is gateway internet? How do I do?
(LAN)
ADSL <---------------->877 <----------------> 877 Gateway <-----------> Clients
View 3 Replies
View Related
Apr 18, 2011
Here is the current Cisco 877 configuration:
bridge irb
!
!
interface ATM0
no ip address
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
[Code]......
View 5 Replies
View Related
Jun 22, 2012
I've got an 877 configured and working just fine as a NATing DSL router, but I'd now like to add an ASA beside it. I've got an extra IP from the ISP so what I'd like to do is bridge the DSL interface to one of the switch ports on the 877 and plug the ASA in there.
I've created a bridge group, put the ATM0.1 in it and then tried to put a switchport in it and get:
FastEthernet1 does not support bridging
So, I created an SVI and put that in the bridge-group and added Fa1 as an access member of that VLAN, but nothing seems to come out the interface to the ASA.
View 5 Replies
View Related
Oct 26, 2012
We have a WIRED network and a WIRELESS network at work. I start downloading a big file over the wireless network. I realize that it is slow, half way thru the processs there any way, I can set up the network, such that, DURING the file transfer process, I can switch from wireless to wired, without any disruption?...
View 5 Replies
View Related
Jan 24, 2013
someone told me that i can use internet on my wifi mobile, if i do bridging between lan and wlan. i have done bridging but unable to search any wireless connection. do i have to connect any wireless tool or something else so that i can use internet on my mobile?
View 9 Replies
View Related
