DIR 635 Won't Connect In Always On Mode?
May 7, 2012
I have a KASDA KD318MI ADSL Router. But it doesn't have wireless capabilities so I use an another router, which is aforementioned DIR 635. When I configure it as DHCP and connect to internet manually, from my desktop connection, its ok.
But when I try to make a PPPoE connection on D-link, it won't connect. I am no expert on routers, but I am trying to learn. I tried everything. Factory reset, updating firmware, then factory reset.
[INFO] Sat Jan 31 10:41:52 2004 Discovering PPPoE servers for INTERNET PPPoE Session
[INFO] Sat Jan 31 10:41:52 2004 Trying to establish INTERNET PPPoE connection
[INFO] Sat Jan 31 10:41:42 2004 Log viewed by IP address 192.168.0.30
[Code].....
View 12 Replies
ADVERTISEMENT
Feb 28, 2012
i got a Dir-655 router and Dell 1501 wireless -N mini PCI card (802.11 bgn compliant). Router was set to mix mode but my desktop Dell XP8300 can connect only till G mode.
1) I search on web and some said that i need to set my router to N mode only for my desktop to connect to N mode. IS THIS SOLUTION CORRECT??
2) Another issue was my sis got other old brand latop which can only connect to B mode, if i set to N mode only, she won't be able to connect it right?
View 14 Replies
View Related
Jul 13, 2012
Hi guys. I'm running Windows Vista SP2 on a Dell Laptop XPS. It seems there were some viruses on the system which I have cleaned out, I believe. I have restored some issues with damaged registry and the system seems to be working great other than I cannot get a strong connection to the internet. It will open up when I first log on, but then the connection is intermittent at best. If I log into safe mode with networking then the connection is perfect, no problems. What I can do to restore the connection to the internet?
View 1 Replies
View Related
Aug 29, 2012
My computer came with Mcaffe pre installed on the laptop however did not stop me getting the police e crime unit virus about three weeks ago. To fix this I booted in safe mode and did a system restore to around 3 months before I got the virus. I then installed avast antivirus and did a scan and boot scan which came back with nothing which suggested to me it had gone. This then meant I had both mcaffe and and avast running at the same time. Then until 3 weeks later the internet suddenly stopped working whilst I was on the internet. My laptop sees my router and says it is connected to it but says the router is not connected to the internet. This is false as every other device in the house can connect. However I then tried my computer in safe mode with networking and it can connect to the internet.
View 3 Replies
View Related
Apr 2, 2011
I can only connect to the net in safe mode. I am wireless.What I have tried:
Scans: Scanned for virus using Microsoft Securty Essential, Malwarebytes and Spybot. There were viruses but they are cleaned now.
Router: I show I am connected to the router. I have unplugged and reset the router.
NIC: I have reset the NIC, shows NIC is working properly
Drivers: Most recent drivers
Firewall/Security: have shut down and tested the internet
CMD: can ping google and others
CMD: reset TCP/IP stack
and many others.
View 14 Replies
View Related
Jan 13, 2013
i have a linksys running dd-wrt and i had for a long time and it always worked but recently it just stopped connecting.i dont know how to fix this it would always say connection limited.
View 2 Replies
View Related
Sep 8, 2012
I can only connect to the internet via IE9 in safemode with networking. This is my parents PC. As a side note I was able to connect in normal mode with Firefox V4 but accidentally updated to FF12 and now it won't work either. HJT log posted below. I've tried reseting and reinsatalling IE9, flushed the DNS, reset TCPIP. Still nothing.
[code]....
View 5 Replies
View Related
Feb 7, 2013
My daughters laptop will not connect either wirelessly or via cable apart from in Safe mode with Networking. It has been working fine for over a year and she has not made any radical changes recently and all other devices in our house work and connect fine. I have run various checks including Malwarebytes and their root checker all comes back clean. It is finding the connections fine, just says No Internet access.It is a HP Pavilion g6 running Windows 7, the ipconfig /all is as follows?
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Danielle-HP
Primary Dns Suffix . . . . . . . :
[code]....
View 14 Replies
View Related
Mar 17, 2013
It's rather weird, One day im connected just fine.. Then bam. Its gone, only to work in safe mode. So I thinking it was a virus.. and my computer was in need of a good restart, I reinstalled windows 7 getting rid of windows.old.. Everything worked fine. Internet was perfect. I have no antivirus no nothing, And now the problem has resurfaced i have only a few programs installed. which is steam, and a few games. I TRUELY have no clue what could cause this. ill preemptively add a hijack this log , Another thing is yes, I do indeed reset router, unplug.. press the button ect. Im on a Desktop... And if this fails.. will buying a cable modem fix the problem[CODE]
View 2 Replies
View Related
Sep 25, 2012
I'm having a little trouble with one of the computers on our home network. It's a desktop computer running Vista, connected to the router by cable. I'm told the internet connection was working fine one night, and the next morning, not at all.
All of our other devices (laptops, etc) connect through the wireless just fine, and I tested the wired connection on another computer with good results. The desktop computer will only connect when in safe mode. In the regular mode, it shows a local connection only, but I cannot ping the other computers in the network.
I ran full scans with McAfee, Spybot and Malwarebytes to clean out anything dodgy, but still no change. I tried turning off McAfee's firewall (and then the whole program), but that didn't make a difference, either. I'm not sure what's suddenly blocking the connection.
Here's the ipconfig/all results:
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[Code]....
View 3 Replies
View Related
Jan 2, 2010
I installed an Intel 4965AGN into my Dell Inspiron (running Windows 7) to connect with 802.11n to my D-Link DIR-655. It refuses to connect in N mode, it will only connect in G mode. I have tried everything I could find online. I set security to WPA2-AES, and even tried with no security with no luck whatsoever. Before the 4965AGN i had an Intel 5300 which had the same problem, but I returned it because I thought it was a problem with compatibility with my Dell. Apparently something else is the culprit. What could I be over-looking?
View 9 Replies
View Related
Aug 22, 2010
I've got a DIR-655 set in bridge mode after a Cisco router. It's been working great for months, but now I'd like to add a new wireless device and want to get the settings. For the life of me, I can't remember how to access it now.The subnet is 192.168.2.XXX I've got a Mac connected through the "internet" port and a cat5 cable. I figure I should be able to go from 192.168.2.1 through 192.168.2.254 and will eventually find it. Is there something I'm missing?
View 7 Replies
View Related
Dec 21, 2012
I just purchased a e1500 to replace my wrvs4400n which sadly died. yea I do loose a lot of features. I set up everything without a hitch but when I try to use Wireless-N mode only, none of my computers can connect to the router and all my computers use N cards. I'm stuck on using Mixed Mode which limits my speed to G speeds. I didn't purchase this to be a G router but an N router and it seems N mode has issues. I am on the current firmware.
View 9 Replies
View Related
Aug 27, 2012
I was provided with a new wireless modem from our internet service provider (the old modem was antiquated and needed updating). After this, i have been unable to connect to the internet on my laptop on a wireless basis. I can search for the modem via the usual means and seemingly connect, but when i am connected it states that i have 'Local Access' only and i am unable to access the internet at all. I am also unable to connect to the internet on a wireless basis when in safe mode.I am however, able to connect using a Ethernet cable from the modem.My laptop is fairly old but it is fine for our needs and thus i do not really want to change it unless totally necessary. I just wonder if it is something relatively simple that i am overlooking?My son also has a more modern laptop, and he tells me that he can use the internet via our new modem without any problems. Which would suggest there is nothing wrong with the modem.The operating system is Windows Vista, if that makes any difference.
View 1 Replies
View Related
Apr 11, 2011
My PC Info: Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft� Windows Vista� Home Premium , Service Pack 1, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 2
RAM: 3069 Mb
Graphics Card: ATI Mobility Radeon HD 3450 , 256 Mb
Hard Drives: C: Total - 305242 MB, Free - 252510 MB;
Motherboard: Dell Inc., 0F700C, , .8QQVVG1.CN4864388L1948.
Antivirus: Norton Security Suite, Disabled
So I am having issues connecting to the internet. I can connect during safe mode but not on normal boot. I ran a diagnostic and it said that the IP Gateway failed. I read a previous post and did the command promp "ipconfig/all" and this is what it said:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersEbony>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Ebony-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
I have norton, and have recently run Malwarbytes, Microsoft Malicious Removal Tool, and Dell PC Tune Up
View 6 Replies
View Related
Mar 14, 2011
Okay so for the past week i have battled with my two routers trying to make them talk to each otherMy main router (router A) is a dlink dir-615 ver. BMy second router (router b) that im trying to make talk to router A is a dlink router dir-615 ver E1 flashed with dd-wrt custom firmware.I have looked at every setup guide people have posted online and youtube videos to no avail
View 6 Replies
View Related
Jul 18, 2011
I cannot connect to the internet via my router. The router is functioning properly two other computers in the house use the router one though Ethernet cable and the other one connects wireless. Things I have done while trying to figure out the problemMade sure all windows updates were up to date Scanned for viruses and malware (none were found) Uninstall the network adapter Made sure the network adapter driver were up to date
I have noticed that when I plug the Ethernet cable from the router to the computer the led on the back of the computer panel does not blink as it does when I route directly from he cable modem.
View 3 Replies
View Related
Apr 23, 2011
I have tried everything - virus checks, HijackThis, disabling services and startup. I have three tabs set for home (CNN, Yahoo and Gmail). Gmail connects but I can't access any other sites. Also Outlook 2007 connects to the MS Exchange Server. The behavior is a little weird because when I first boot up, all my tabs load properly but then after a minute or two, I press the "home" button and suddenly nothing will connect (except Gmail, which still continues to connect). All has been fine for years and then all of a sudden this happened when I returned from a business trip (had the computer with me and everything was fine). I have ruled out router and other connection issues. In Safe Mode, the connections are just fine. As a last resort, I may reinstall XP but I would obviously prefer not to.I have a Lenovo Thinkpad T400, running XP SP3.
Logfile of Trend Micro HijackThis v2.0.4
Scan saved at 11:47:14, on 4/23/2011
Platform: Windows XP SP3 (WinNT 5.01.2600)
MSIE: Internet Explorer v8.00 (8.00.6001.18702)
Boot mode: Safe mode with network support
[URL]
View 3 Replies
View Related
Jan 16, 2013
I configured the EA4500 to work in bridge mode, to use it as an accespoint for an existing network (Linksys WRT610N). It gets an IP address (192.168.1.141), but does not offer a wireless network (the ethernet ports do offer network acces). When I try to access the configuration on IP address 192.168.1.141 I get the Linksys Smart Wifi page asking for the password. When I enter the password, a message "Waiting" appears and that's all. It keeps me waiting forever and I cannot access the configuration settings.I have tried to reset the router (30sec. reset button, power off 30sec, power on) but the result is the same.
View 6 Replies
View Related
Apr 5, 2012
different ways to connect a printer to the X3000. how to connect a printer to the X3000, i.e. wirelessly, USB port, or directly via one of the LAN ports. I also checked the product information for X3000 on the CISCO website and it only makes reference of the USB port as StorageLink.
. Since then I have reconsidered and now am looking to purchase the E4200V2 to connect in bridge mode to my X3000 instead of the E1500. Correct me if I am wrong but connecting the E4200V2 to my X3000 should be the same connecting the E1500 to my X3000, i.e. bridge mode? Yes or No?And my final set of questions is rregarding what would be the best set-up for adding a storage device and printer to my network once I get the E4200V2 and set it up in bridge mode?
- Should I connect both the printer and storage device to my the E4200V2?
- Should I connect them both to my X3000, which provides my internet connection?
- Should I connect one to the X3000 and one to the E4200, if so which to which for best set-up?
View 4 Replies
View Related
Mar 18, 2013
I had configured one access point CAP3602E in flex connect mode through a WLC 5508 after deploying the access point in flex control mode the local mac-filering is not working. before it was working when ap was in local mode. any body have to know is the mac-filtering working in flex-control mode ?
View 2 Replies
View Related
Sep 16, 2012
I got an ASA 5510 system currently in single context mode, with CSC SSM installed. Single ISP uplink to internet, no VPN. And now customer would like add another ISP uplink, without invest another box for HA.What come across my mind is make the current box into multi context. There's some area i need to concern and also need yours perspective on it.
Question 1: For making the firewall into multi context, am i need to do it from scratch, issue mode multiple command. Then rebuilt the current production config into one of the context, then another context meant for the new IPS uplink, and one admin context?
Question 2: For CSC -SSM licensing requirement, model ASA 5510 with security plus license is able to support 2 context. So if i split my firewall like what i mention in question, what exactly number of context do i own (admin, context A, context B)?
Question 3: For CSC-SSM module in multi context mode, so the management port of CSC SSM must attach at admin context?
Question 4: After configured all the policy and traffic to scan, how exactly i should do in order apply this policy to the interface? Should i only enable at admin context, then firewall service-policy rules, and apply it global, OR should i also do the same action on context A and Context B?
View 3 Replies
View Related
Feb 19, 2013
I am not able to connect to any webpages in normal mode, even after restarting i still have the same problem [However it works in safe mode with networking]. The network connections show that it is connected and the signal strength is excellent. I then have to keep restarting the laptop like 3 to 4 times and it works. Its kind of frustrating to keep doing this all the time and besides i am scared by restarting the laptop so many time can harm it.
View 1 Replies
View Related
Mar 4, 2012
We have recently converted 1 Cisco Lightweight AP 1041 to Autonomous mode for site-survey purposes. We now want to convert it back to lightweight mode.
View 1 Replies
View Related
Mar 12, 2013
I received the following info from Cisco's TAC and wanted to inquire further before I start reconfiguring the switch:
In a redundant Sup-6E setup, the following configuration is supported :
- 1 TenGig uplink on Active Sup and 1 TenGig uplink on Standby Sup
- 1 TenGig uplink on Active Sup and 2 Gig uplinks on Standby Sup
- 2 Gig uplinks on Active Sup and 1 TenGig uplink on Standby Sup
- 2 Gig uplink on Active Sup and 2 Gig uplinks on Standby Sup
If you invoke shared backplane mode, the following configuration can also be supported:
- 2 TenGig uplinks(blocking) on Active Sup and 2 TenGig uplinks on Standby Sup
- 2 TenGig uplink(blocking) on Active Sup and 4 Gig uplinks on Standby Sup
- 4 Gig uplinks on Active Sup and 2 TenGig uplinks(blocking) on Standby Sup
- 4 Gig uplink on Active Sup and 4 Gig uplinks on Standby Sup
Here's the command and information about the "shared-backplane" mode :- [URL]
Currently, we have 2 SUP 6-Es(Module 5 - Active and Module 6 - Stand-by) setup in a redundent mode. I am planning on changing the redundent mode to the shared backplane mode so I can use 2 TenGig converters to uplink 2 access-switches. We purchased 2 TenGig converters and here is how I am planning on using them:
1- One will be used to uplink to two 3750 switches(stacked)
2- One will be used to uplink to a 2960 using a Gig SFP
My questions are:
1- Do I have to install the 2 TenGig converters(4-Gig Uplinks) in the same Module? Or can I use one one in module 5 and the second one in module 6?
2- Will changing the redundant mode to the shared backplane mode require rebooting the switch or disrupt the funtionality of the other linecards?
View 2 Replies
View Related
Sep 14, 2012
I installed DD-WRT on my router and placed it in bridge mode, configuring it with what I thought was my Androids IP address for the gateway. I tried with the Android IP address identified through cmyip.org, 208.54.32.156, and with the one identified through ipconfig command, 192.168.43.1. Neither address was successful. Also, I am unable to access my router using the IP address that I manually assigned to it.provide some assistance on the process of bridging from an Android to a wired PC through a router, Linksys WRT54G v3,
View 1 Replies
View Related
Apr 17, 2013
My Compaq Presario V2000 (HP) using Win-xp3 will only connect to the internet using safe mode. When trying to connect in normal mode a message appears saying I cannot display webpage and what I can try is diagnose connection problems. When I click on diagnose problems it tells me that Windows cannot troubleshoot network connection because an error has occured.
View 3 Replies
View Related
Feb 20, 2013
I put the ea4500 on Bridged mode, and now I cant connect!I know I have to put the new ip address, and when I do I choose direct conect, it ask me for a password, I put the password, I click to connect, and then it just sits there in waiting....
View 9 Replies
View Related
Aug 30, 2011
Our customer use catalyst switch that spanning tree be PVST+ mode.I take SG300 connect with this catalyst switch.Does it support ?If it support,how to config on SG 300 ?
View 1 Replies
View Related
Feb 26, 2013
How can we know that 6500 and 7600 series switch and router are running in native mode or in hybrid mode.
View 2 Replies
View Related
Nov 12, 2011
with my Linksys WRT150N router in "N-only" mode, the usb adapter WUSB100 doesn't connect. In the datasheet is written that it is B-G, but also N compatible..[URL] It connects only when the router is on "mixed mode" (B-G-N).
The device works great, the only thing is that it doesn't connect to N networks.... cause i think it is not N compatible. When i look for networks, Windows shows me that there is my N network, but when i click connect, after a few seconds, appears "impossible to connect".... but if i set the router on "mixed mode", no problems.
View 9 Replies
View Related
Feb 10, 2013
I have a Dell Inspirion M5110. Windows 7, 64 bit.
When ever I open the lid to the laptop it takes 5-10 mins before it will automatically connect to a network. Diagnose this network does not find anything, nor provides any troubleshooting. Typically if I open the network connections center and disable the wireless, let it sit for 30 secs or so, and re-enable, it will finally connect.
I know it's not my router, as the laptop does the same thing at work, and multiple different friends house.
I've confirmed that DHCP is set to automatic connect. I've also checked Device Manager/Network adapters/ and unchecked the box "allow the computer to turn off this device to save power"
View 3 Replies
View Related
Mar 4, 2013
How do I connect to the EA6500 once it's in Bridge mode acting as a wireless access point? Checked the posts and some seem to be able to do this but, we cannot.
View 6 Replies
View Related
