Dlink DIR 615 / Good Router For Controlling Internet Access
Feb 21, 2011
I have a Dlink DIR 615 , I can never get it to manage the time correctly, even without any down time the time always goes off by hours or days. I tried using an NTP server option... 3.ca.pool.ntp.org but it doesn't work.... so I am not able to schedule the internet effectively router that they have that keeps the time and allows them to control the Internet access that would be good. My kids are teenagers so sometimes it is like talking to a wall trying to get them to control their internet, I can easily block them entirely as I have Mac filtering set, and I will do this, but I would like to not have to constantly check to see if they are online which is easily done with Ipods.
View 11 Replies
ADVERTISEMENT
Mar 2, 2012
In office we have a broadband internet to 6 systems one router .I want to control the partcular system internet
View 1 Replies
View Related
Mar 3, 2013
Until recently I used the 2.4GHZ band for my pc and my son used 5GHZ for his laptop on our D-link router.A couple of weeks ago our provider installed a new Cisco modem/router-in-one (the old modem didn't work any more). We use the D-link as a second router. The 2.5Ghz band is no problem but my son doesn't get internet access with 5Ghz
View 3 Replies
View Related
Apr 5, 2011
I am in a location where I can pick up great wifi signal, but when I connect to this unsecured signal, my page won't load. I ran a diagnostics & Association failed. I would also like to mention that I am also configured to use a broadband usb through a cell phone carrier, but if I can get the wifi free, I certainly don't want to pay for the broadband.By the way, it's an XP operating system.
View 1 Replies
View Related
Jan 22, 2013
We have 3 laptops and Verizon high speed wireless internet. I cannot access internet on my Acer it appears that Mozilla Firefox has been "firewalled".
View 3 Replies
View Related
Feb 6, 2012
I have a new audio/video receiver that has Apple Airplay functionality built in. Now the Airplay allows any Iphone/pod/pad/tunes device/computer on the same network to route music to the receiver without plugging in the device directly. Great concept but the execution allows any computer or iphone in my house on the network to take over my receiver with no questions asked and start playing.
So far I have failed to find a way to restrict or shut off Airplay on the device itself (other than disabling it's network). If there is anyway through networking or my DIR-655 router to control/restrict this access? What I would like in a perfect world is to keep all computers and wireless Apple I devices from connecting to the unit unless I allow it for that particular device/computer. In an imperfect world I would accept just blocking wireless devices from it but still allowing them full network connectivity otherwise.Some things I have thought of - Can I use static addressing for the A/V receiver but put it on a different subnet then what my router is set to? Is there some network control in the firewall that may limit access to the A/V receiver?
View 14 Replies
View Related
Mar 19, 2013
We have 2 5520 ASA's working in an active/standby function at our central site. The remote agencies have control of their ASA's or other devices able to create VPN tunnels back to the central site. When a new remote agency wants to connect to our central site we assign them a network range that is routable on the central sites network.We ask that the remote agency NAT into the addresses we provided them.This way we are able to route back to them. We assign the interesting traffic and then they we start communicating by way of the tunnel.
Since the central site can't control the traffic coming in on the site to site tunnel other than just defining the interesting traffic AND we aren't able to control the NAT on the remote end how can I put an access list on the central site ASA to allow only certain ports and IP's by way of access list? Ultimately, I'm trying to limit traffic on the central site coming inbound to only allow traffic I want. I tried applying a group policy to the lan2lan site to site tunnel, but it failed for some reason. It actually prevented all traffic. Can I apply a group policy to a site-to-site tunnel?
I'm struggling here a bit as I don't have control of the remote end. They can NAT whatever they want to an address in the range we assigned them. The tunnels interesting traffic is set to full ip to the central site's destination. The interesting traffic on the central site is set the same. However, on the central side...I want to limit that traffic to only certain ports by way of an acl. If it is possible to assign a site-to-site tunnel a group policy and filtering is done in that method, can
View 3 Replies
View Related
Dec 29, 2010
i want to control manageent access to symbol Wireless Switch WS6000 with my ACS. the issue is that i can't find the Vendor Specific Attributes forSymbol devices. i wonder if theres a way to control it with IETF or Other Radius Attributes.
View 3 Replies
View Related
Apr 21, 2013
I need to make some perfomances (like up/down GRE tunnels) on Cisco ISR 2921 by sending SMS. It could be doing by using 3G modem like a Huawei and a server with some expect/SSH-scripts.
But ISR gen.2 has EHWIC-3G modules, which working with GSM networks and they can send/recieve SMS. I think, that it should be an EEM event or some another way to track comming SMS and process it by TCL-script — get a sender number, SMS body and make usefull perfomances on my router (up/down GRE tunnels in my case).
If I done this trick only by using an ISR router and EHWIC-3G module, it will be much more stable scheme in that we dont have extra components (server, modem) potentially may falls.
Unfortunately, there are too low information about configuring this modules (especially, SMS-part) and I dont find usefull for me.
View 2 Replies
View Related
Feb 23, 2013
I have 2 mbps line with D-link modem shared by 2 persons through wire. Sometime I feel that my client is using more band width than me so I want to know is there is any way I can control the speed of my client.
View 1 Replies
View Related
May 26, 2012
Recently the router has been dropping the wireless connection, and now is not connecting with the computer - the ethernet still works. It was suggested to upgrade the firmware but I can't access the configuration.I've tried admin, and blank password which is supposed to be the default. I've also tried XXXXX as password, and another username and password in case I had altered it for security.It doesn't allow me in.
View 13 Replies
View Related
Dec 12, 2011
I want to link a tp link router as access point to a d-link router.
View 2 Replies
View Related
Sep 27, 2011
How to disable the access to a specific web site on a dlink router DIR-655
View 1 Replies
View Related
May 16, 2012
i ahve a dlink dir 615 B2 router and it wont connect to the internet. on day it was fine and working, the next day the internet led wouldn't change from the red light to the green light.i have tried resetting it about 60 times, while the laptop was on/off, while it was plugged it, while it was without power, while the internet cable was in, while it wasn't, while it was shut down and i reset it and the i pluged it in while resetting it...i dont know what else to do!! short of smashing the bejesus out of it. The internet works fine when i connect the cable directly to the laptop, I don;t have a cable modem or anything, just a plain old cable from the street to my house.
View 3 Replies
View Related
Jun 3, 2011
This keeps happening, the router keeps disconnecting from the internet every 5 seconds. What can be going on? I have already logged into the dlink admin and changed the RTS Threshold to 2304. After that, it worked for a couple of days, and now its back to disconnecting again. What can be wrong? If you need any additional info. just let me know.
NOTE: I have already checked for the firmware update, and it appears to be up to date.
View 5 Replies
View Related
Mar 15, 2012
We have a dlink DIR 615 router that keeps dropping the internet connection. I checked with our internet provider about the connection and it is fine. The desktop has no internet issues just the wireless devices. We run a laptop, iPod, cell phone and tablet. Everything was fine until we added the phone and the tablet.
View 3 Replies
View Related
Feb 1, 2012
Would like to set up a secure internet conection and I found out that can be done though the D link, but not sure how to do it free.
View 1 Replies
View Related
Dec 24, 2011
the modem is open.the router also is open but dont have internet access.
View 1 Replies
View Related
Mar 23, 2012
set up of the router? There's so many options, manual internet set up, automatic internet set up, networking setup.The Quick CD installation got stuck trying to find the router. Do i need to connect the ethernet wire to my modem then connect my computer to it wirelessly? Do I need to connect the ehernet wire to my modem and connect my computer to it via another ethernet port in the router? Do I even need to connect my ethernet wire to my modem in the first place?
View 12 Replies
View Related
Aug 9, 2012
Now I am no techi but I think i have set evrything up ok but when i input my host name in ie all that happens is that it brings up my router admin page. I don't see how i can get port forwarding wrong so thats not the problem, the dvr is a zeus and its using port 80, which according to a port checking tool is closed (is that the problem) the router is a Dlink dsl 2680. My host name is [url]..... and the ip is set to public ip address, so up to press im stuck.
View 14 Replies
View Related
Jan 21, 2013
i have internet connection to my PC (windows 7) by wimax internet connection.that connect by usb to my pc. (and check the sharing option on this connection)then i need to share internet on my pc on wifi by using D-link2640u router,i connect my pc to D-link router by rj-45 cable.and setup wifi network but this wifi network did not have internet connection.
View 1 Replies
View Related
Feb 23, 2013
Its a Toshiba laptop and she has a d-link 2680 wireless router. The laptop will successfully connect to the internet through an ethernet cable, and will connect to the wireless network fine but when wireless i cannot access the internet. I have an iphone which connects to the wireless network and accesses the web perfectly.I have tried everything I can think of and find online to try and talktalk tech support won't assist as its a hardware setup issue.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Barbara-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
[code]...
View 2 Replies
View Related
Jun 30, 2011
have wireless d-link adsl modem router which usually use for adsl connection sharing, but i have a cable internet connection, so my question is can i share my cable internet connection with this router?
View 1 Replies
View Related
Sep 12, 2011
So currently where i live we dont have internet other than the tethering of our iphones. I bought this router mainly for use as file sharing between 2 computers. The reason i bought the router over a switch is because we are moving in 2 months and will have cable internet.So because of this if i have the router plugged into the computers and i plug my iphone with its USB into the computer to access the internet the router seems to block it. When calling support to find out how to disable the routing to allow the iphone internet through they seem to not know what the heck im talking about.
View 1 Replies
View Related
Nov 13, 2011
i have internet connection which is connect using dynamic ip address but if i add ip address in Local Area Connection i get two networks, one is internet dynamic ip & other one is ip which i setup in Local area connection. so if i select LAN network for lan clients i can access lan. but now i have DLINK DIR 615 router so what should be my settings?
View 3 Replies
View Related
Jul 8, 2011
How do I install a D-Link Wireless router, DIR 655 to the Verizon Fios internet. I have tried different ways but cant get it to work.
View 13 Replies
View Related
Oct 18, 2011
The internet in my house stopped working. I can not access from my hardwired playstation, any wireless or hardwired laptop. It gives me an error code 105 for google chrome. DSN lookup failure. From my phone using wifi it says there is no internet connection.
View 1 Replies
View Related
Sep 16, 2011
I have a home network that uses a DLINK DIR-655 router. All of my devices ( a mix of wireless and wired) except one--a windows xp SP 3 desktop that stopped working yesterday. Some viruses, and adware were detected and it has not worked since then. What I have done.
View 11 Replies
View Related
Mar 19, 2011
getting my computer connected to the internet.I have a fresh install of XP Media Center Edition with SP2. I don't really have anything else installed as I wanted to make sure my internet connection was working to get updates. My computer is a Dell XPS720 desktop I have a DSL connection with [URL] and a Dlink Wireless Router DIR655.I have two portable computers that are on the local network with wireless connections and they are working o.k.On my desktop at the command prompt; I cannot "ping" anything and "ipconfig /all" returns nothing at all.
View 3 Replies
View Related
Aug 2, 2011
I am working on an assignment for college and I was wondering if 1.01 mbps is a good internet download speed for a wireless computer?
View 1 Replies
View Related
Aug 14, 2011
I have 2 computers in my room which between them i very frequently share files between. Wirelessly they were both connected to my home's router until recently the router was removed, but will be back soon.The problem though, was that with using the router, file sharing between those computers was slow, and with the router gone, I was lost because there was no movement of data between the computers whatsoever, I had no crossover cable, but plenty of regular ethernet cable. Than I remembered something about gigabit lan not needing crossovers(both of the computers being gigabit) and I connected them, and marveled at the new way to share files. And more by the exponential boost in speed(800kb/s to a grand 12mb/s{though I still think that is slow for gigabit.}). Obviously I've overcome a problem, but that's not where this story ends, it comes with another problem. When the router is reconnected to these computers, will the files still transfer through there new found direct connection? or will it attempt to go through the router, only allowing me to get the speeds I want when one of these computers isn't connected to the router?
View 11 Replies
View Related
Apr 18, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : Not Clear
Firmware Version :
ISP : HughesNet
I received this router today, I have a MacBook Pro and a iPhone. The router came with a very small cd, I was very disappointed because , when I purchased this router from amazon , the discription read that this router is Mac compatiable. But that is not true if the cd is not compatiable! My problem is I get a good signal for wifi, but I can not open any websites with my Mac or my iphone.
View 1 Replies
View Related
Aug 15, 2012
MY voice conversation on magic jack breaks up when I download a movie to my direct TV. I have a Belkin F9K1103V1, N750Db. I'm not using WiFi, Im wired to ports on back of Belkin.
View 3 Replies
View Related
