My laptop has been unable to download anything via my wireless network. Whenever I attempt to download a steam game for example, it will start downloading and after 5-10 seconds the internet will drop out. The wireless connection is still maintained, but the internet is not available. It is fixed by cycling the router, however this is very painful as to download 100 mb of data, it may take 20-50 cycles.
View 3 RepliesWhen downloading files using chrome I keep getting "unknown network error" before the download is complete. Why is this happening and what can I do about it? I am using vista on an acer aspire 5535 laptop. I tried using internet explorer a few times instead but it has also happened there.
View 1 Replies View RelatedSo i recently purchased a new laptop, Lenovo y580, came with win7 home premium, 8gbs ram. But i noticed the downloading speed is around 30-100kb/s, which i have no problem getting 1mb/s on any of my other computers. I'm using comcast and i really doubt its their service, I tried to upgrade my wireless router firmware, reinstalling the wireless adapter, and they didn't seems to work.
View 8 Replies View RelatedI have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies View RelatedThis past weekend I went out of town and took my Windows 7 laptop with me -- since I returned home, it has been unable to connect to my wireless network. Other devices in my home connect to the network just fine, and the problem laptop has always been fine until now. My network card is an Atheros AR9285, and I'm attempting to connect to a Medialink router with WPA password protection and AES encryption.My wireless network icon in the task bar has a yellow sign with an exclamation point in it. It says "No Internet access."
View 1 Replies View Relatedmy new dlink router 655 was working great when I hooked it up to my desktop computer that was running vista windows and my hp notebook that runs windows 7 ultimate was working just fine too, but when I downloaded windows 7 ultimate to my desktop I lost my internet connection. after resetting it I got it back and I thought everything was fine, but now I have to reset it every few hours.
View 2 Replies View RelatedI have been having a few problems with my IBM T42 Laptop for a while now. I was originally running Windows XP on this system and about 12 months ago I installed Ubuntu 9 on it to mess around a bit with the OS and have a basic, non-Microsoft laptop in the house that I could use for browing the web and IM, etc... The laptop needed a clean install anway as Windows XP was running like a dog. Originally it was dual boot but once I got happy with Ubuntu I did a clean install and everything worked reasonably well. I had a few issues with the wireless LAN adapter and compatibilty, but sorted it out following a few forums (firware updates, driver updates) and everything was great. I upgraded to the Ubuntu 10.04 OS and then started having some issues. Essentially my browser would freeze randomly. Again, I visted the forums and had no joy in sorting out the problem. I reverted the OS back to Ubuntu 9 and the problem persisted. So I gave up on it totally around 6 months ago.
Last week I fired up the laptop again and decided I would use the IBM restore utility and the disks I created a couple of years ago to put on a clean install of Windows XP and see how things went. So far I have done all the Windows XP updates (SP3, etc...), I have been to the Lenovo website and updated all drivers, firmware, BIOS, etc... every little problem I have had has been sorted with a software or firmware update which I have successfully implemented. All niggles have been sorted bar one.The only problem I have left now is very odd. Everything works fine and at reasonable speed considering the age and specs of my system. When I connect via cable to my router/modem all network and internet services work fine. I have had no issues. But when I connect via wireless, intermittently my system will completely freeze - no errors, no logs - nothing. No sounds, just frozen screen. Hard reboot is the only thing that I can do to get back online.Further investigating the issue - the freezing occurs when I click on a link to download something. I can browse anything - I have tried videos (youtube) and have no problems at all - but if I click to download a file (software upgrade pack, pdf document, Qucktime player) the system freezes up and ONLY when connected wirelessly via the inbuilt Cisco Wireless LAN adapter. [code]
My problem is that whenever I leave a torrent downloading for a few hours (using a wireless connection), my internet connection drops, both wired and wireless. I have to power cycle the modem and router to get things working again. When I plug my computer in with an ethernet cord and leave a torrent downloading, the connection doesn't drop.
View 1 Replies View RelatedPretty much immediately after that I was unable to connect to internet via wireless but could still connect via ethernet cable. I have tried searching the internet and my computer to see if I could fix myself, as I'm sure there's probably just some settings somewhere that have been altered - but I'm completely bamboozled!! One thing that I noticed when trying search for settings etc is that I cannot add any wireless networks, or select my wireless network (in the network and sharing centre) so that I can select 'diagnose and repair' - my laptop just doesn't pick up anything!I have an eMachines E525 laptop with built in wireless (Atheros AR5007EG wireless network adapter) and operating system is Windows Vista Home Basic SP2.
Also, not sure if related, but on start-up I get an error message saying 'Microsoft Windows Search Indexer stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is availablenyway, I have done the wireless test that I found in of the older posts on this topic already and results are below, my wireless network is highlighted
I am getting 50% downloading speed when I connect through wireless router (Tp-link wr740N) but the browsing speed is ok and speedtest,net also giving good result only download speed is slow. When I connect directly from modem, I get 100% speed but when I connect wirelessly through router I get 50% downloading speed.
View 3 Replies View RelatedI'm trying to "resurect" an old wireless network made with Cisco Aironet 1100. One of the AP has lost its IOS (due to an error while trying to upgrade it through the web interface)
I tried to reload it with the "mode button". I can see in my TFTP server logs that the AP is downloading the IOS but nothing happens and the AP keep being stuck (leds are : red/green/red)
I've some troubles connecting my PS3 to my RV120W.Both router and PS3 have latest firmwares. They are connected wireless (distance is about 10 mt, signal is good).PS3 ip is in DMZ (connection doesn't work with only Upnp), and ip fragmentation is enabled.Everything seems to work (NAT type 2), but downloading on PS3 is extremely slow. My ADSL is a 6Mb, download speed on PS3 seems like more than ten times lower (I don't know how to test it..). Plus, downloading a 100 MB patch is almost impossile, cause sooner or later I get an error and i have to restart.Two of my PCs are connected wireless, so I guess wi-fi is not the problem.
View 3 Replies View RelatedAny upload somewhere of this version of wrt610n firmware! I really need it cause I have to downgrade to that one in order to use my 1TB hard drives.
View 6 Replies View RelatedOur newly installed WAP's are constantly downloading code and seem to lose contact with our wism 1 version 7.0.235.3, causing them to restart the downloading process, over and over.
View 12 Replies View RelatedOn the WLC I've set DHCP address pool, everything seems fine after ap download image -> reboot -> hit "Enter" to start blar blar blar... however, after a few second the WLC will initial upgrade image again and again. it's like a non-stop process.
Attached is the start up message, as you can see, i captured it after the ap successfully boot up, and WLC initial another cycle of image upgrade.
btw, my network is flat, WLC & AP all in the same network.
*Nov 3 06:28:30.788: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
examining image...!
extracting info (292 bytes)
[Code].....
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :
I have a problem with this router TL-WR1043ND (i have the latest firmware version), when i try to download torrents on wireless the wireless signal crashes after a few minutes.. in order for the wireless to work again the rooter needs a reboot.The other PC, that is connected via the cable
I set up the e1500 and everything worked well, my download speed over the wifi was something like 50mps, now its down to .3 mps over the wifi. When I'm hardwired to the router the speed goes back up and everything is fine. The only problem is the wifi. Its not the ISP because my roommates aren't having a problem with their wifi at all. I haven't changed anything on my computer except updated some drivers since I set up the router. My network card drivers are up to date and so is the router's drivers. I'm also doing all this about 5 feet away from the router.
I have a Dell XPS L502x running win 7 64 bit.
I have the following setup at home:
-E4200 connected via Ethernet cable (100Mbs) to local ISP for internet access
-E4200 connected via Ethernet cable (1Gps) to my desktop PC
-E4200 connected via wireless (5Ghz with WPA2 personal) to my laptop
In general, everything works fine, I can download files from internet to my PC close to the maximum speed limit (80-90Mbs), the wireless connection goes up to 300Mbs and it can achieve around 10-14MB/s file transfer between PC and laptop.A lot of the time the wireless connection to my laptop is used for HD content streaming from the desktop PC. It works very well until I start downloading files to my PC with speed greater than 50Mbs, when the wireless connection speed drops very fast to about 500KB/s which results in interruptions on the video streaming. At the same time the router’s web interface reacts much slower than usual, as if the router’s CPU is overloaded.
I’ve read this follow up review on Small net builder url...and it’s clear that there are some issues when taking E4200 to the limit, but in my case it’s nowhere near that.
I did an upgrade to my firmware on the x2000 dsl router and now i cannot download apps with my android phone, i have tried everything that i can think of.
View 7 Replies View RelatedI'm having an issue with my laptop. Although, from my provider, it should be possible to establish a connection at 25'000 kbit/s (download), max speed is at about 800 kbit/s. I'm only about 20 feet away from where the router is located and I don't use any phones (except for a cell phone). I read on this board, that I might have to change the wireless settings on the router and change the radio band but didn't manage to do so. I'm using Mac osx and a wireless connection.
View 4 Replies View Relatedi have a little annoying problem with my E4200. V1 with the latest 04 fw. It seems, that after many hours of downloading at full speed (only one torrent at a time) the speed goes down, and up again, and becoming unstable. My max download speed is 1.5 Mb/s, and it can drop from that, to 50 kb/s, and then up again. and i have no internet access when that happens, but it only last 10-20 seconds and then its back again. Sometimes i get that yellow warning sign on the taskbar which says "No Internet Access" but not always.
Seems like its happening after many hours of downloading at full speed. im on the latest firmware, have tried different channels, 20 Mhz only on Channel Width, different names on the 2.4Ghz and 5Ghz channels.. i use the 2.4Ghz channel btw. Otherwise its stable, and i have had no problems while gaming online.
I have the latest firmware, have the settings correct (the UPnP is disabled and whatever)
Model number: E3000
Serial number: CVQ01KC13100
Firmware version: 1.0.04 build 6
Operating system: Windows 7 SP 1
Software version: 1.3.11006.1
Connection type (WAN): PPPoE
Went out of town 2 weeks in March, and all through April didn't have any disconnects. Have had this problem since I got it, it gets really bad from time to time (like now). Thought it was my provider for the longest time, but found out if I connect via wired, no disconnects! Is re-flash simply downloading and installing firmware?
I use in my network Linksys 4200v1 (newest firmware) and Sipura SPA 3000 ( 3.1.20(GW)firmware) and SPA 122 (1.1.0(011) software version as my phone adapters.My voip phones are working great until I start to download or upload some files, watching on-line tv.How and where should I set up above routers to have the same great quality voip while uploading and downloading at the same time?
View 4 Replies View RelatedI have access to a wireless network, but when I try to connect my laptop to the network it says that it can not connect. And, of course, you can't troubleshoot it without a connection...I don't know if I accidentally changed my settings somehow or what, but I'd like to get the problem solved.
View 5 Replies View RelatedMy laptop won't connect to my router however the wireless network connects to everything else in the house fine. It might work for a little bit ( sometimes an hour, sometimes only a few minutes) but then it will completely refuse to connect. The wireless LAN is enabled, it even shows full signal on the laptop it just will not connect. The LAN is enable but the button for it is blinking, I don't remember it blinking before. I'm not sure if that could be the problem. As its connecting it just says " waiting for the network" and that happens for about a minute then it just disappears.
View 2 Replies View RelatedMy problem is my laptop is not connecting to the only network in my home and I can connect to all other wireless networks around.Also there is no problem with the router/modem coz all my room mates can connect and access internet wireless and also through Ethernet.Even I'm able to connect to the home network using Ethernet but not wireless. Strange but true!
[code]...
connect my partner's laptop to my wireless network?
The router is a Sagem provided by my ISP (Sky). The wireless connection works fine on my MacBook, and various other devices connect no problem with the security key.
However, his laptop (Windows Vista) will not connect wirelessly. After entering the password, it says it can't connect because it 'times out' (we are obviously entering the password immediately with no delay). It connects fine with an ethernet cable. It will also connect to an unsecured wireless network we can pick up.
The security setup is WPA-PSK with TKIP encryption, and we've made sure he is using these settings.
If it might be important, he has just moved here, and previously his laptop was connected to another Sky router with no problems.
I tried to set up an ad hoc access point on my laptop, but it won't connect to the network I made. I'm using xp sp3.
View 2 Replies View Relatedlast night I had reset my router, I may have factory reset it, but ever since then, nothing can connect, nor even find the wireless connection, other than the home computer that is directly wired to it. My laptop, my tablet, amd my xbox cannot connect. On my laptop, it cannot even find a connection available, even when I'm in the same room as the router. All it has are the no signal bars and the little "x". Everything was working fine before I reset the router. Now nothing can even find a connection! How can I get my connection back? my laptop is windows 7.
View 15 Replies View RelatedMy laptop will not connect to the wireless network it used to connect fine but a few months ago I stayed with my girlfriend for a while and could not get it to connect at her house, so, I phoned up the mobile techy bloke and he came round and changed the settings on the router to/from wpa or something like and also the settings on my laptop, problem is now I am back home it won't connect, it finds the network ok but when I try to connect it says it can't due to a timeout? its is running windows vista.I have managed to create this post via my phone as the laptop willnot connect in anyway
View 4 Replies View RelatedI have a laptop computer that I want to hook up to a router but I don't want to have to keep the ethernet cable plugged into my laptop. Is there a way to set this up where I can set up the router and then use the laptop connected wirelessly to the router? In a nutshell...I don't want to have to keep the ethernet cable plugged into the laptop.
View 4 Replies View RelatedMy laptop won't connect to the wireless internet connection in my house, even though it will connect to any other wireless network and all other phones and computer seem to connect to this network fine. It just says the connection is local only. Every once in a while it will connect for a reason I don't know, but when I try it again the next day, it won't work. However, the laptop will connect with the ethernet cable.The wireless provider, TalkTalk, have said I might need to try installing or reconfiguring Wireless 0. I googled this and followed the instructions to set the WLAN autoconfig and wired autoconfig to automatic, but that hasn't fixed it
View 14 Replies View RelatedMy laptop has windows xp.my home has wireless network.how can i configure to my labtop with wireless network?
View 4 Replies View Related