Drivers For Device Are Not Installed
Sep 11, 2012The drivers for this device are not installed. (Code 28) And is hard for me to reinstall because the reinstall driver's button to click is not showing.
View 1 RepliesThe drivers for this device are not installed. (Code 28) And is hard for me to reinstall because the reinstall driver's button to click is not showing.
View 1 Repliesi reinstalled Windows Vista using the disc that came with the Dell Inspiron 1525.I then went to the dell website, downloaded and installed the 2 network drivers. So now the internet works with a cable but the network card is still not showing up.How is the laptop still not recognising the wireless card? Are there any additional drivers i need?
View 14 Replies View RelatedI can not set up and access to my wireless application on my DELL Inspiron 510 m.I have installed all drivers from "network" category, but my wireless network does not show in my "network places" on Windows XP.
Wireless adapter is enabled in BIOS and I have used Fn+F2 to turn off and on wireless device, but still nothing.
My daughter bought a Dell Optiplex 745c from a company who is replacing their cmputers. This particdular computer does not have any drivers loaded for the installed NIC card, so te machine will not talk to the intenet. Are the drivers in the 745 and the 755 the same?
View 1 Replies View RelatedThe bluetooth module is installed and even the icon appears in the tray. But I am not able to connect any device . I am using Dell Inspiron 1545 laptop (Win 7).
View 1 Replies View RelatedI have dell n5010 win 7 home basic 64 bit which shows that my bluetooth peripheral device is not installed becoz of which i think my lappy is not able to find any devices through bluetooth.
View 1 Replies View RelatedHow may I find out if on my XPS 17 702X I have installed a mobile broadband device?
Tried on Device Manager and nothing found but when I checked Radio Control Options via Wiindows Mobility Center, on the Radio Control Options
the Mobile Broadband option is mentioned but without possibility of thicking it! Also when I go via Dell Mobile Broadband Manager The msg "The mobile broadband device is not found.
I have Dell Inspiron 5160 which recently had a HDD crashed. I installed a new HDD and installed OS Windows XP Home edition - I installed video drivers and chipset - Now I had no idea which drivers to installed so I installed the default listed Network drivers in the CD provided to me BUT I dont know somehow they are not visible -- ALL the network and other devices in the Device Manager have yellow Question mark along with ! and are saying Device drivers for this drivers not found - I have installed all sort of drivers from support.dell.com but still does not work.
View 18 Replies View RelatedThis device is not working properly because Windows cannot load the drivers required for this device. (Code 31)Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.Plug and Play ID.When I test it says the adapter is working properly. I don't know if this matters but I am unable to get microsoft updates. I have 16 that continue trying to update but my computer will not allow.
View 8 Replies View RelatedI had installed the aheros AR5B97 wireless network adapter in wondows 7, but it was not properly installed and the wireless service icon is not displayed in the network profiles.when i checked it in the device manager it showed a device status that:Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)
View 1 Replies View RelatedI did a clean install of windows 8 and my tooth application or drivers do not show up in device manager dell xps studio 7100.
View 1 Replies View RelatedMy BEFSR81 is my primary router and has DHCP turned on. The router's DHCP range is set to accommodate 12 devices. I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table. I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go. I would like to be able to tell which printer is which when I am looking at the DHCP device table. How can I get a names associated with each printer's IP address in the router's DHCP device table? (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)
View 1 Replies View RelatedWe are using LMS 3.2.1 with SP1 and Campus Manager 5.2.2.Server runs Windows 2003 R2.Everything runs fine except for User Tracking on two Catalyst 6500 switches running CatOS. These devices are discovered, reachable, SNMP works fine, neighbors seen. But when we try to launch acquisition, the UT utility complains with this error message:"Failed to start acquisition: Device unreachable. Please enter a valid device."When we wanted to add ports via Device Trap Configuration, LMS has fired a different error message: "There are no ports to configure for the selected device(s).Check whether you have selected any router(s)." I have checked the portsData.xml file, which doesn't have any ports included for the two devices: [code] We have tried to exclude / include the switches in the data collection, but that didn't work.
View 3 Replies View RelatedThe problem: I need to track a bus from city to city in real time.I'm thinking of a gps device without screen or apps, it only sends the current location to a server. Is this possible? What device can be useful?
View 1 Replies View Relatedi am using bsnl broadband connection.when i want to connect to internet it is saying that TCP/IP NOT INSTALLED.DISABLE E-MAIL SCANNING IN YOUR SEMANTIC PRODUCT 1003,3. so i removed the semantic anti product. still internet is not connecting. what shall i do?
View 1 Replies View RelatedIs is possible to find the iLO IP for a server that has no OS installed? I'm not completely sure how iLO works. I believe the person who needed the IP was going to mount an ISO for OS installation via iLO.
View 4 Replies View RelatedJust had a new Hub installed today, and it'll connect to the Hub, but then not onto the Internet? Never had a proble with my parents wi-fi. Other people are able to connect just fine.
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersJamesypoo xD>ipconfig /all[code]....
putting cat 6 utp in came conduit as 14/2 48 V for ptz camera
View 1 Replies View Relatedi installed all the drivers i need and it still wont install broadcom 802.11n , i have been on the phone with till for almost an hour.
View 2 Replies View RelatedSeveral months ago I installed D-Link's DIR 655 on my W7 x64 PC. Everything worked fine including NetFlix and being able to view photos located on my PC on my Sony TV. The TV is connected via wired Ethernet cable from the D-Link and I use my cable service signal from the router to the TV.
Then I had to reinstall my OS and although I can still view all the cable companies offerings, including NetFlix on the TV, I'm no longer able to see or view images located on my PC on the TV. I didn't change any of the wiring.
I tried reinstalling the D-Link CD but I can't find where it installs on my PC. It's not listed in the Device Manager or in Programs. I'm wanting to know what version of the D-Link driver I have and to be able to view photos and videos on my TV that are located in shared folders on my PC. I'm the only one who uses the PC.
Because of a virus, I recently had to reinstall Windows 7 on my laptop. Upon restarting, I found out that I cannot connect to the Internet using a wired connection (Ethernet cable). I tried going in the Device manager to try and troubleshoot the Network Adapters, but the only object in that category was "Intel (R) WiFi Link 5300 AGN". In a lower category, "Other Devices", I see two "Base System Device", one "Unknown Device" and one "Ethernet Controller", all of them with little yellow exclamation marks on the icon. I guessed the problem was the Ethernet Controller, so I tried "Update Driver...". It told me that it could not find a driver for my device.
View 2 Replies View RelatedI just recently installed windows vista on my toshiba laptop model L3O5D. Every thing went smoothly and before you know it I was up and running, with one major problem, I can't find any networks to connect to to access the Internet.
View 12 Replies View RelatedI just installed a fresh copy of XP on an old Dell E310 my wife and kids use. Just an FYI, I used D-link prior to the re-install with no issues for a few years. Anyway, after XP was up, I put the D-link drivers on. The internet came up and worked like normal for 5-10 minutes, then 'poof', gone. Each time I attempted to connect after that I got a warning message stating I do not have network adapters? I was under the impression that is what D-link was?
View 1 Replies View RelatedI have a desktop (windows 7) with two administrators. How do I transfer installed videos (DVD's) from one to another?
View 1 Replies View RelatedI want to install 2 wireless routers for the same home network. I want to know if I need 2 modems to go with the 2 routers or if I only need one. the routers will be placed in different locations in the house.
View 1 Replies View RelatedI have an office server set up to about 10 computers. We hired 4 new people and had to set up their computers on our network. Set up was easy and quick as usual. But when I was done, the other computer users, and even the new ones were complaining about not being able to access the DEFCON5 (name of our server) folder to get what they needed.
Basically the only workstations that show up when I click Network are the computers I added the other day, and the computer that is used more than any other computer (the CEO's). We can still access the files by typing the location as \DEFCON5****** and find what we need. But not everyone at my office is computer savy (no body is) and I would like to not have to keep running around and showing everyone this.
After getting the cable set up (some new wireless modem that comcast gave us) we were able to connect to the internet once, after putting in the password, but after that the next day our computer would not recognize any networks at all, it's just say no connections are available.I already:-restarted computer,-reset modem (we used to have a router and a cable modem but now only the wireless modem)-rolled-back drivers,-disabled then re-enable driver (did NOT uninstall or reinstall)-opened the computer up, take out the adapter, tryed and got the dust off-unscrewed and rescrewed antenna- tested a laptop, and it had an internet connection - and probably a few other things which I can't rememberLast time on the computer, I uninstalled a few things with revo, ran registry cleaner, browsed internet, and installed a new nvidia driver (after the problems arose). I was able to install a netgear wireless usb adapter (which is how I'm on the internet right now), but it frequently gitters and I can't use the NetGear for very long seeing as how a different computer uses it.
View 3 Replies View RelatedI just installed ubuntu 10.10 and I'm unable to connect to the internet. I checked for device recognition and the output is DISABLED which apparently means that my network device may be turned off. How can I turn it on. Windows is no longer installed. By the way I'm an ubuntu newbie. Hence, I wiped my hard drive during installation.
View 1 Replies View RelatedI have a Lexmark Z-22 installed on an old desktop. Hard drive crashed; now need a printer for 2 laptops. Can I somehow use this old printer for the wireless network?
View 1 Replies View Relatedi want to create a LAN between 3 nos of windows 7 installed computer
View 2 Replies View RelatedTo fix a bunch of other problems I've installed the 313NA firmware on my rev. C2 DIR-615
I can connect to my ISP and DHCP just fine, and I get DNS servers back just fine, but the DIR 615 doesn't serve DNS correctly for the devices on the LAN. If I set the LAN machines' DNS manually to the IP addresses provided by my ISP they can look up hosts just fine. With them pointing at the DIR 615 for DNS they get nothing.
When I attempt to perform a name lookup using the admin System Check -> Ping Test I get "Unknown Host". The same name lookup up by any other LAN machine using the same DNS hosts gets the correct result. I've made sure there's no caching.
I am looking around hwo to know the flash and ram installed in WLC 4402? try looking any command, sh ver not there. even in WCS.
View 2 Replies View RelatedI installed ACS 5.3 on a VM machine for evaluation. The install went fine as I used the recommended settings in the install guide. All the services are up and running when I issue the "show application status acs" command. I am trying to access the web page via http://192.168.1.199:2002 and it just times out. I can ping the server and the server can ping my machine.
View 2 Replies View Related