HP Pro-Curve SNMP Link Aggregation Configuration
Aug 7, 2012
I am looking after a mixed collection of Cisco and HP switches and use a Perl script to extract configuration data.I use the ifStackStatus table (OID: 1.3.6.1.2.1.31.1.2.1.3) from RFC1573 to sucesfully obtain the EtherChannel data from the Cisco switches but, though I do obtain data from the same table from the Procurve switches it seems to bear no resemblance to Link Agregation. I could look at other tables and may have to - but would like to use this one in order to simplify the code.
View 2 Replies
ADVERTISEMENT
Feb 13, 2012
what is the difference between "link aggregation" and "STP"?
For example:
I have two switches connected with two ethernet cables together. Why I will use link aggregation on trunk ports (without load balancing) when STP will do same service?
View 13 Replies
View Related
Jul 23, 2011
I am trying to setup a home network where I have multiple low bandwidth or rather lower bandwidth links coming in. They are suppose to be broadband but I do feel the need for a fatter pipe. Since this is in India and we have limited availability of bandwidth options like here in the US I thought if I could double or even get close to doubling my bandwidth using some sort of device for link aggregation or a network / pc setup which can achieve thisThe links I am getting are above 1mbps, possibly even 2mpbs and its relatively cheap, 100$/yr so I can add 3-4 to get desired results. A dedicated 10mbps connection costs nearly 12000$/yr so I have a lot of margin to create a substantial pipe without the cost if what I am thinking is possible.
View 4 Replies
View Related
May 19, 2013
I've been having some issues lately where if I am copying large amounts of files two and from my NAS and thus saturating my gigabit ethernet, web browsing and internet streaming slows down which is a bit of a bummer. I figured I might fix this with link aggregation.
My switches (Procurve 1810G-24 in basement and 1810G-8 in office) both support 802.3ad Link Aggregation. It works beautifully to connect them together, as well as to connect my FreeNAS box to the switch as well.
how do I set it up to work with my Windows 7 box?
I can't find the options for 802.3ad in the windows menus anywhere, and googling has not led me to the answer yet...
My motherboard has two on board Intel gigabit ports (Intel 82574L and Intel 82579V). Is it possible to link these two, or do I need to pick up another Intel PRO PT dual port copper gigabit NIC like I have two of in my server?
View 1 Replies
View Related
Feb 16, 2012
We want a solution for routing between N5K and VSS with aggregated WAN links.
DC1: It has 2 cisco 6509 with VSS. There are 4 server farm cisco4948 switches connected with VSS with redundant uplink via MEC. Server gateway is the VSS. VSS is running Eigrp routing.
DC2: This is a new datacenter we are going to establish soon. We are planning 2 N5K at core layer with L3 daughter card and 4 N2K as server farm switch. 2 N5K will have vPC peer between them. Each 4 N2K will connect with redundant uplink via vPC with this N5K. N5K will run Eigrp routing and will be the gateway of this new DC server.
WAN between DC1 & DC2: DC1 VSS will connect with DC 2XN5K with 2X10G links. we want to do MEC at VSS side and L3 vPC at DC2 side. If we have VSS at both end it might not be a problem. Both the link will work together as 20G aggregated link. But as we are using N5K at one end, so it creates a confusion whether it will work properly is this scenerio or not.Also I would like to know,
1) In VSS I have configured 1 VLAN interface for server gateway. But in N5K do I have to configure at 2 switch seperately?
2) In WAN routing VSS shows as 1 device. Does this 2 N5K will show as 2 seperate hops or L3 vPC will allow them to act as a single device while traceroute from one end to another end.
View 19 Replies
View Related
Mar 5, 2012
I'm trying to setup Link Aggregation on this switch for an HP server with a 4-port NIC which is teamed. I create the LAG and see in the HP Network Utility where each port in the team disconnects then reconnects and the server has internet access, but workstations cannot access the server (can't browse UNC, RDP, ping, etc.) and vice versa. This is the only switch at the site, all the workstations are plugged into it. Rebooting the switch after creating the group didn't have any effect.
View 1 Replies
View Related
Jan 10, 2011
i'm installing a Firewall Cisco ASA 5550 with 8 Gigabit interfaces.
I have installed firmware 8.2.3.
Is it possible to make link aggregation on ASA to have more bandwith?
View 7 Replies
View Related
Aug 21, 2011
Having issues waking NAS devices using a magic packet when using link aggregation on an SG300-28 switch.
Without link aggregation everything works fine so I know the magic packet is being generated correctly and the NAS device is correctly configured to wake. After configuring link aggregation the device does not wake. Have tried dynamic (LACP) and static link aggregation but neither allowed the device to wake? When the NAS is powered off, the ports in the LAG still show as being connected at 100M but it appears the magic packet is not being transmitted.
View 1 Replies
View Related
Jun 22, 2012
I have a Synology 1512+ and trying to setup Link Aggregation but no success. I have configured LAG Management with LACP enable or disable but still failed.
At the Synology 1512+ setting page, there are 2 options: IEEE 802.3ad Dynamic Link Aggregation and Network Fault Tolerance (Non-802.3ad network enirovement), I selected IEEE802.3ad, which i think S200-18 should be able to support. right?
View 3 Replies
View Related
Sep 16, 2012
if my SA520w will support link aggregation for network devices within my LAN. If so, is there a Cisco wiki or how-to on how to setup this up in the SA520w? I only find a brief mention of this in Section D of the manaul.
View 1 Replies
View Related
Aug 14, 2011
answer regarding stacking the SGE2010 switches versus link aggregation if greater than 1 Gb connectivity is required between individual switches? Currently have several switches in a stack configuration but would like to increase the bandwidth between some or all of the switches. Does stacking support a link aggregation configuration? If so what ports can be used and how should the link aggregation be configured in conjunction with the stacking?
View 2 Replies
View Related
Jan 8, 2012
I have two 2960 switches connected with two links. One of them is transparent modem connection with 2Mbps limit, and the other is optical link with media convertos on both sides. Is there a way to set up etherchannel, LACP or any other kind of link transparent to switches or I have to use some sort of STP?
View 1 Replies
View Related
Nov 4, 2012
I have two workstations running 7 Pro, each has a quad port intel card (PCIe) which I have created teams for on both sides using link aggregation. On my switch, a Cisco SG500X-24, I set up two LAG's with 4-ports each and have both servers connected as necessary. I turned on Jumbo frames and disabled energy saving. The teams were set up without LACP turned on, however I tried it with LACP and I also ran into the same problem. Both workstations have a 26TB arrays running in RAID 6 (so plenty of read/write speed), however, with this setup, I can only get about 100MB/s (single port speed) and multiple data streams cause the speed to divide. Only single ports blink on the cards as well.
Questions 1 is probably a no-brainer, but it's my first time setting this up, but once this is working properly, would it allow a single file to transfer at ~400MB/s or would I need to start multiple datastreams to take advantage of link aggregation.
Question 2 is what do I need to change to make the link aggregation work?
I do have a little linksys router plugged into a non aggregated port to do DHCP but that wouldn't mess anything up, would it? Considering I can unplug it once everything is talking, all the transfer should take place at the switch level, correct?
View 1 Replies
View Related
Jul 19, 2012
I have configured below SNMP v3 commands in Cisco Router 7206VXR (NPE-G1) . I have tested with all option but it is not working . SNMP server is a SNMPc tool and I have configured user name and piv and authentication credential correctly in both side . Same configurations is working for all Cisco switches but not working for Cisco Router.
SNMP V3 configurations:
access-list 20 permit 43.194.10.0 0.0.0.255
snmp-server view readview iso included
snmp-server group readonly-group v3 priv read readview access 20
[ code]....
Router :
Host Name# sh versionCisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 12.2(33)SRD7, RELEASE SOFTWARE (fc1)[ code]...
View 3 Replies
View Related
Jul 22, 2011
if there is document available for SNMP configuration for WLC 4404?
View 4 Replies
View Related
Mar 23, 2012
I want to know how to retrieve the complete configuration for a Nexus via the snmpwalk or snmpget commands...
View 6 Replies
View Related
Mar 5, 2013
Would like to ask whats the correct snmp config so that it will send to our snmp server when a mac flapping occurs on a cisco switch specifically 4507 switches.
View 6 Replies
View Related
Jan 22, 2013
I have a Cisco ASA 5515-x, setup as my router with a split-tunnel SSL VPN for remote users.. It works great, except when connected via VPN I can only access the same subnet the ASA and HP switch reside on. My VLANs provided via my core HP 5406zl L3 switch are inaccessible. This must just be a simple routing issue, but between Cisco and HP I can not wrap my head around it.
Comcast---> Cisco ASA (VPN) 10.20.28.1 ---> HP (vlans)-----> VLAN 1 10.20.28.254 (Works fine over VPN), VLAN 45 -10.20.45.254 (No access over vpn), VLAN 99- 10.20.99.254 (No access over vpn)
Intervlan routing works great, I can access VLAN 99 from VLAN 1 and vise-versa. I have a route on the HP switch for 0.0.0.0 0.0.0.0 10.20.28.1 for internet access. On the Cisco I have a static route of 10.20.0.0 255.255.0.0 10.20.28.254. I believe my issue is that the HP requires your default gateway to be your VLAN IP for the intervlan routing to work. With my split tunnel SSL VPN, I do not believe it uses the correct routes.
Where and what routes do I need to add so that I can access the other VLANs when connected via VPN?I have a test environment setup and I am going to start testing by disabling split tunneling to see if I can access the other VLANs.
View 6 Replies
View Related
Dec 22, 2012
We have Cisco 4948 switches running in production. We want to moniter the trunk link through SNMP.If trunk link fails SNMP need to send notification to server.
View 1 Replies
View Related
Sep 10, 2012
I have Cisco 2960's, 3750's and 3750x's all running IOS on the access layer. I have Cisco 6504's running IOS on the Distribution and Core layers. I am looking to monitor redundant links through Spectrum by having specific ports send traps but I have run into trouble finding how to configure it. I would like to have:
1. Logging enabled for all links (Fiber and Copper) so that I see all links up/down messages in the syslog
2. SNMP traps sent for linkup/link down messages only for redundant links (ex. Dual Up links from Access Layer or Redundant Ether channel Links on Dist Layer)
3. SNMP traps should be ignored/not sent for all copper ports.
View 3 Replies
View Related
Feb 8, 2012
How to determine why my HP Pro-curve switch randomly faults and resets during the day, about 3 to 5 times?
View 5 Replies
View Related
Mar 3, 2013
I have 2 Procuve Switches one is 2650 were all the Department PC's & Wireless access points connected & second one is 2610 were i have the firewall connected,Active Directory & Windows DHCP Server
Switch 1- 2650
Ports
Port 1-16 is used by HR Department
Port17-32 is used by Finanace Department
Port 33-34 is used by Access Points
Port 41-48 is used by Users
Port 50 is used to uplink to switch 2610.What i wanted to achive is Isolcate Departments & Users & Access Points through VLAN from each other but they should be able to hit our Active directory for authentication, Firewall for internet & DHCP Server for IP's.
View 3 Replies
View Related
Jan 8, 2012
i am trying to daisy chain 2 pro-curve 1810g 8 port switches.i got the cable i need to connect them but i just want to know what kind of settings i have to change on the switches to have it run as best as it can.
View 17 Replies
View Related
Sep 27, 2011
why my Blackberry wifi doesnt find my pc wireless. I have Blackberry curve 9300 3G. OS 6
View 1 Replies
View Related
Apr 11, 2013
I am trying to connect two Asterisk Server (with DHCP server enabled on both) on a HP Pro Curve 2626 switch. Server A has IP address 192.168.2.1 and Server B has IP address 192.168.3.1. I created a two new VLAN on switch, VLAN2 for 192.168.2.0 network and VLAN3 for 192.168.3.1 network. I put the command "ip routing" on the switch. My goal is to be able to ping ip address from PC 1(VLAN2) to PC 2(VLAN3) and vice versa... I'm not sure what I am missing... By the way, there is NO ROUTER involved on this set up. I tried to Google and it says HP ProCurve 2626 is a Layer 3 switch so IP routing should be possible.
View 4 Replies
View Related
Dec 14, 2012
I have webcams that need port 8081 opened and I did that, everything worked fine until my DIR655 jammed up and power cycling it and the modem 3-4 times DID not make it work: no internet access and it was definitely a DIR655 problem. So, out with the paperclip to do the big reset, causing me to lose my configuration. When "most" of it came back up with my new config (I had screen prints), all was okay EXCEPT the webcams. Addresses and ports were all configured properly, address was fixed too on the client computer rather than use DHCP. I had a DNS relocation service running (DYNDNS) for the WAN side, but that address (My IP) didn't change either. I tried EVERYTHING. Finally, I realized in all my screwing around that I had enabled UPnP in my application, something I hadn't done before, but did this time as a desperation move. UPnP had always been checked off in the router. So.....I REMOVED my port forwarding and virtual server settings (either one worked before), and voila, everything working, Is this a normal occurrence, that if you have UPnP running, that this auto configuration overrides any manual configuration?
View 2 Replies
View Related
Sep 28, 2011
We have an ASR1006 and I'm just discovering net flow aggregation cache.
I tried prefix aggregation and worked fine. But i cant get any information when checking AS aggregation. All I get is 0 in source and destionation AS. [code]
View 1 Replies
View Related
Sep 5, 2012
whether VSS technology support on 3560 switches.I'm planning to intergrate new Cisco 2x6509 with VSS and all the access swtiches 3560's uplink to core 6509..if not support, what will be the solution or any bug fixing or new IOS releasing
View 1 Replies
View Related
Jun 6, 2013
We are running a Cisco 887VA router for our internet access but of course the port connected to the internal network only supports 100Mbit/s. There are a few 100Mbit/s ports on the router; I was wondering whether it was possible to use more than one port to provide aggregation to get higher speed such as two ports providing 200Mbit/s? We are running Gigabit internal.
View 4 Replies
View Related
Dec 27, 2012
We have a customer who has a network consisting of two ISPs, one as a primary and the other as a backup. We are trying to create a configuration that would allow the primary link to fail and the secondary link to automatically pick up traffic and begin routing .how to set something like this up. Both routers are non Cisco routers and there for HSRP is out.
View 14 Replies
View Related
Mar 9, 2012
I stuck with a DIR-655 so I don't have to re-program all my custom settings.HOWEVER, I am attempting to load the settings file I saved from my A3 into my new B1 and it doesn't work. It says "The restored configuration file has been uploaded in failure". "Press the button below to continue configuring the router".
View 1 Replies
View Related
Mar 11, 2012
We have a pair of N7K distribution switches connected to a pair of N7K Aggregation switches.We run vPC on both pairs of n7k's.
-n7k-d1 has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC1)
-n7k-d2 also has two interfaces in a Port-Channel connecting to n7k-a1 & n7k-a2. (PC2)
My problem is that Spanning-Tree is blocking PC2 and all traffic from n7k-d2 is traversing the Peer-Link before reaching the Aggregation layer. Is this the best design for connecting two pairs of n7k's with vPC or if a better design would be to connect all 4 links into the same Port-Channel and vPC?
View 7 Replies
View Related
Sep 12, 2011
set up a wireless network connection? i have a wireless router but cannot access it using my browser?
View 3 Replies
View Related
