How do you connect a wireless access point to a network switch that gets Internet from a cable modemow_do_you_connect_a_wireless_access_point_to_a_network_switch_that_gets_Internet_from_a_cable_modem
View 2 RepliesI am running windows 7 home premium 64bit and have a wireless connection. Can I connect a switch to my LAN port on my PC and share my network connection with other devices? Would it operate as a standard switch would operate coming from a router?
View 1 Replies View RelatedRadio switch is turned off.
View 1 Replies View RelatedMy goal is to have my modem in the basement connect to a switch (D-Link 10/100/1000 8 port) so it can split wired connections to 6 different computers. One of those wired connections will be connected to a wireless router (D-link DIR655) on the 2nd floor.
How would I connect all this up? How would I set this up for each router?
How can i configure my wireless AP to provide wireless internet to my network via my switch?
View 2 Replies View RelatedHow do I use Cisco Connect to set up E2000 as a switch and set up wireless connection, when I am using E3000 as my main router that attaches to the modem?. When I use Cisco Connect I seem to only be able to address the E3000 settings through Cisco Connect..
View 3 Replies View RelatedMy wifi was previously unprotected. I switched to WPA2 and now can't connect to my network. In the set up, it can't even see the adapter. The lights tell me that the adapter is talking to my computer. The ethernet and wifi lights blink. What can I do other than unprotect my network? How can I set this up manually if the computer can't even see it?
View 1 Replies View RelatedI just bought a e3000 and I have a 24 ports switch. I would like to plug more than 8 pc...how do I proced ? I used to have a dlink router and just plug a cat5e from the dlint to the switch ... but it doesn't work with the e3000
View 5 Replies View RelatedI have 3 pieces of hardware:
1. Green Packet DX-230 WiMAX modem with router
2. D-Link DIR-615 ver G2 (from my ISP)
3. D-Link 8 port desktop switch
I previously used the DIR-615 with my high speed broadband connection. However I had to move to a new house and here I can only get WiMAX. I want to...Place the WiMAX modem upstairs to serve as modem and wireless access point Have the DIR-615 function as the main router and firewall (downstairs) Use the switch to connect all the rooms in my house FYI my WiMAX modem has no connection configurations. I just plug it in and it'll connect automatically to the WiMAX signal. It has 2 LAN ports but no WAN port. From my understanding of networking, I have to turn off DHCP on my WiMAX modem, put it in the same IP range as my DIR-615 (192.168.0.100-199), and disable UPNP and NATPMP. After this I'm stuck.How do I tell my DIR-615 to use the WiMAX modem as it's WAN connection?Should I reserve an IP for the modem in my DIR-615?
We have implemented WLAN using Cisco WLAN controller (5508) and AP (AIR-CAP3502E-E-K9), i am trying to connect AP (which have gigabit port) with Layer 3 switch using UTP Cat-6 Cable having 24 AWG Wire Gauge.
What maximum length i can achieve by using above mentioned cable?
I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View RelatedIn my main office, I have a cable modem which is connected to my main E4200 router. All of my equipment (except my Ooma) is served by the E4200. The E4200 broadcasts a wireless network.In my basement, I have a Wii / entertainment center. The E4200 signal from upstairs isn't strong enough to stream video.
I bought the WET610N and have successfully set it up to interact with the E4200 wirelss network. I can hardwire my laptop to the WET610N and verify the internet works greatHowever, the Wii must connect over wireless. I have other equipment in the basement which would benefit from an internet connection. So, I want to A) connect the ESXS88W 10/100 8-port workgroup switch I have to the WET610N *AND* also broadcast a wireless signal in my basement (assuming the wireless network I see in the basement is the same "old" one from upstairs which has not benefited from the WET610N).
How can I set up my WRT54G2 to broadcast a wireless signal in the basement so that it leverages the E4200 signal served by the WET610N, while also having the workgroup switch offer hardwired connections to my other equipment (like Dish Network receiver)? It doesn't seem to work by just plugging the WRT54G2 into the workgroup switch.
I just installed 2 new units and neither will connect to a new HP gigabit switch - no link light, other devices can connect to the switch OK. Their gigabit ethernet settings are set to auto for duplex and speed. I also tried forcing one of them to full duplex and 1000 Mbps which didn't work either. They're both powered by POE injectors. If I connect them to a 10/100 switch they work fine.
View 8 Replies View Relatedossible to connect a pair of switch serving the same segment (active/passive) into 1 switch?
View 6 Replies View Related Here is my setup:
1- laptop1 is windows 7 with 192.168.1.1, submask 255.255.255.0
2- laptop2 is windows XP with 192.168.1.2, same submask as above.
Laptop1 connects via CAT5 (non-crossover) RJ-45 into a switch (port 1). Laptop2 connects via CAT5 (non-crossover) RJ-45 into port 2 of switch. Both ends of the CAT5 are, of course, connected into each laptop's network connector.pinging resulted in timed out from both.
I would like to allow a single computer to easily operate laser scanners one after another. A single laser scanner can create an ip address for it's "network" that a computer can connect to through an ethernet cable.Is it possible to connect a computer to the input port of a switch and to connect the laser scanners to the multiple output ports, then individually access the ports by connecting to each laser scanner's respective ip address?
View 2 Replies View RelatedMy problem is that whenever I switch my pc on I have to physically enable the WZC program and then select windows to manage my wireless network settings. Once I enable it this way it is fine, but then if I restart or shut down my pc then I have to do all the process again...which is rather annoying!I have a BT Home Hub 2.0 and Cisco WUSB600N dual band wireless adapter.I understand you have to choose one program to manage the wireless network settings as they conflict, but on the Network Magic program that comes with the Cisco adapter, I cannot find an option on there to disable it.There is another pc using the hub with an exact same adapter aswell and when that is switched on the broadband connection automatically loads on that. So I am a bit stuck, I've trawled the internet for answers but have come to a dead end.
View 5 Replies View RelatedHow may I connect 2 PCs to a Cable Modem via a TP Switch? Only 1 PC has net connectivity while the other one shows invalid IP address problem.
View 4 Replies View RelatedAm trying to connect 3 pcs connected to a Dlink 8 port switch through a Dlink WL2100 Access point connected as an AP Client to the main network. Only 1 pc is able to see the main network and am having none of the other 2pcs are able to see the main network. The 3 pcs are able to see each other.
View 1 Replies View RelatedI have connected two servers to my network. Both servers are running Win 2008 R2 and I have connected as follows.Connected 3Com switch to 2Wire router using Ethernet straight cable. Then connected server to 3Com switch.All lights on switch are green, but still unable to connect to internet.When I connect server to router, internet is working, but not through switch.
View 1 Replies View RelatedHow is it possible to connect a host to a switch when they're in different subnets? I'm new to Networking and was thinking it may be achievable through VLAN configuration?
View 3 Replies View RelatedI have a question regarding the network setup. I have 3 pieces of network hardware and a fast dsl connection. The hardware is:
- DSL Modem from my provider with static IP connection (CISCO - don't know the symbol)
- DSL Router (edimax ar-7084a)
- Switch (Hewlett-Packard JD871A)
Now the task is to create a LAN network so all my computers can talk together and have a internet connection shared between them.When I connect Modem to Router and then 4 CPUs to router, it is working fine. The problem is that the router has only 4 ports and that it is 100Mbit slow. I would like to use the HP switch for the LAN setup (1Gbit) and then connect the switch to router and router to modem. But it doesn't work I cannot establish internet connection this way. I'm setting all the settings in my router but it doesn't work as it was in simple setup modem->router->cpu. when I add switch to this, the setup is going berserk.Problem is that I would like to create a LAN only between computers using switch. I have other computers that I want to conect to the router directly and don't see the computers using switch.
Can we connect different networks using switch without a router
View 4 Replies View RelatedI added a switch (TP-Link TL-SG1005D plugged into a D-Link DGL-4100 router)) so I could add a computer or two to my network. I have my Vonage modem plugged into the switch and it works fine, but when I try to plug a computer into it, nothing. I've been trying to use an XP machine that I rebuilt, and I keep getting the "limited or no connectivity" message.
I've tried all the fixes I could find for that, and still no joy. I even plugged it right to the modem with no luck so I tried plugging my Windows 7 machine into the switch and it couldn't find the network either, but it works fine plugged into the router. When I go into the router, it has an IP address assigned to the switch, but the phone modem does not show up, where it did when plugged directly into the router. Is this normal?
Am I missing something simple here as far as the switch goes? The XP machine won't find the DHCP server and has the 169.254.XXX.XXX IP address with a MAC address of FF-FF-FF-FF-FF-FF. I've tried Microsoft's hotfix and releasing and renewing the IP...nothing. I know that's separate problem than the switch.
I want to connect switch to a router.tell me the connection of ports.
View 2 Replies View Relatedwith server , laser printer , adsl modem and desktp computer
View 2 Replies View RelatedI have an underground cable connecting a classroom to the main server.
If I plug any computer directly into the underground cable it connects to the server fine.
If I plug a switch into the cable, none of the computers connected to the switch gets an IP address from the server. When I try to assign manual IP addresses I also can't connect.
But when I use the same switch and plug it into the server using a shorter cable everything works.
How can i configure the 4 laptops to connect to a switch for gaming?
View 2 Replies View RelatedI would like to connect 3pc via switch and let them connect and be able to transfer data from one pc to another using network
View 1 Replies View RelatedI have a printer canon 2230 i want to canact via network cabel throw switch ,then i want to sarching printer then show workgroup and next proces is not go.
View 1 Replies View RelatedI want to connect 1 laptop and 2 pc,s to a switch via wired ports. Laptop has WiFi Internet. I DO NOT want internet going to the PC's. Question is will this set-up work for me. all 3 are windows 7
View 4 Replies View RelatedIn win 7, I do not find a terminal emulation program, how can i connect to CLI of Cisco 300 series switch through its console.
View 2 Replies View RelatedI have Zyxel Modem configured in bridged mode with static IP from ISP. I want to connect multiple PCs to modem via switch so that each PC use the same configured Public IP address to use the internet. For this (generally) I would need to configure NAT for that IP. But I want to know that will it work under bridged mode or not?
View 8 Replies View Related