I have connected two servers to my network. Both servers are running Win 2008 R2 and I have connected as follows.Connected 3Com switch to 2Wire router using Ethernet straight cable. Then connected server to 3Com switch.All lights on switch are green, but still unable to connect to internet.When I connect server to router, internet is working, but not through switch.
View 1 Replies
I can connect without any problems on my desktop PC and my other laptop, but it's been nothing but trouble with this one. First I go and try to connect to the network: On the laptop that I have no problems with, this usually comes up: Instead, it goes straight to this, and it doesn't even let me try to type in the password: I'm very new to wireless networks, so I couldn't possibly know what's wrong. I've tried several things, but nothing has worked up to this point.
View 6 Replies View RelatedI can't connect wirelessly or hardwired. My internet provider is AT&T DSL. My router is a 2Wire 2701HG-B and my antivirus and firewall is McAfee. Attached are the ipconfig/all and Xirrus Wifi.
View 16 Replies View RelatedI cannot connect my Toshiba DX1215-S21 with my 2wire gateway. There are 7 devises that are connected and on wifi.
View 1 Replies View RelatedI purchased a ZyXEL 3205 to serve as a universal repeater in my house, to boost the DSL wireless signal from upstairs to downstairs. I have a 2WIRE router, and my DSL is through AT&T. The wireless works just fine (and we've been connecting multiple devices through it for over a month), but the signal is weak downstairs, so this seemed like a good cheap solution.I found several good sets of instructions on setting up the 3205 as a repeater, so while complex, that was not really a problem.
However, the 3205's status is still marked as "disassociated", which means that it won't connect to the 2WIRE. It can see the signal, and I'm telling it to connect and giving it the correct key. It also broadcasts just fine, since my wireless devices can connect to the 3205 when it is turned on. However, the 3205 refuses to actually connect to the 2WIRE for some reason. Is there a known issue with connecting? I've checked all the obvious things - they're set to be on the same wireless channel, both using the same encryption settings, and there aren't any ip conflicts happening, since the 3205 is set to an unclaimed ip in the same space.
I have a network that starts with a Linksys wireless router (DSL connected here) then it goes to a Netgear switch (computers connected here) and then a Netgear wireless router for an iMAC to connect to. I can't see the last router or the iMAC on my Win 7 machine? when I map network I get an error message about an incompatible device.
View 1 Replies View RelatedI have AT&T 2wire wireless modem. I am working on a friend's computer and his computer detects the modem but won't connect. I have entered the 10 digit number on the router into his laptop and then I tried the homegroup password and still it won't connect.
View 6 Replies View RelatedHow do I connect my Iphone to my ATT router, Gateway 2 WIRE WIFI?
View 1 Replies View RelatedI am trying to connect two Asterisk Server (with DHCP server enabled on both) on a HP Pro Curve 2626 switch. Server A has IP address 192.168.2.1 and Server B has IP address 192.168.3.1. I created a two new VLAN on switch, VLAN2 for 192.168.2.0 network and VLAN3 for 192.168.3.1 network. I put the command "ip routing" on the switch. My goal is to be able to ping ip address from PC 1(VLAN2) to PC 2(VLAN3) and vice versa... I'm not sure what I am missing... By the way, there is NO ROUTER involved on this set up. I tried to Google and it says HP ProCurve 2626 is a Layer 3 switch so IP routing should be possible.
View 4 Replies View Relatedjust want to confirm if I could use the 2x 10GE uplink ports of a cisco 2960 to connect to my Server directly?
View 17 Replies View RelatedI'm trying to connect Switch 3560 to NTP Server based on Linux, the NTP is working fine but the switch is sync with the Server:
address ref clock st when poll reach delay offset disp
*~10.0.0.70 208.53.158.34 3 42 64 377 1.7 -2.49 0.1
* master (synced), # master (unsynced), + selected, - candidate, ~ configured
Clock is synchronized, stratum 4, reference is 10.0.0.70
nominal freq is 119.2092 Hz, actual freq is 119.2093 Hz, precision is 2**18
[code].....
But server has on time and the Switch another. I test this NTP with CUCM and is working fine, the issue is with ther server?
Recently I have faced following problem in my office, We have purchased two new Dell Server Power Edge R910 with built-in 10GB FC Network card. Service tag of this two servers are given bellow.
1. 7D94C2S
2. 6D94C2S
You can can Check specification of this two server from dell website{ URL}
We have two CISCO switch and model is given bellow:
Brand: CISCO
Model: WS-C3560E-12SD
We want to connect server to switch through FC cable and both switch have SPF module. But when we connect server to switch, link do not establish even switch and server port light become off.
Then we have tested the following things:
1. Connect server to server through FC cable, it is okay.
2. Connect switch to switch through same FC cable, it is okay.
I don't understand why it is not working.
I have ATT uverse and they gave me a router 3600HGV (2Wire). The router went into the communication box of the house from where it connects to various ethernet ports in various rooms of the house.
The connections work, but they are slow and sometimes do not even work. My guess is that there is IP conflict between the two routers. I am not even able to go to the 192.168.1.254 router config.
How can I get my router to stay at one ip so I can set it as the DMZ server?
View 1 Replies View Relatedwhere do I find wep # for 2wire router
View 5 Replies View RelatedOld Configuration:
A 2 Wire 2701HG-B DSL MODEM/Router Upstairs
Wired into 2 PCs upstairs
WiFi to a PC Downstairs.
I killed the DSL service and got U-verse, but that added a new Modem/WiFi downstairs. I still have the 2Wire upstairs, but it has no phone connection.Can I use the 2Wire to "Receive" and "distribute" the WiFi signal from downstairs?
I don't see how to turn off the DSL MODEM. If I put in the ID and Password for the WiFi router downstairs into the 2Wire upstairs, will it "Login" or will it conflict? Are there special settings for the PCs to access the U-Verse router through the 2Wire?Basically, I want to know if the upstairs 2Wire can receive the U-verse signal and convert it to wired signal for the 2 upstairs PCs.
The other day, I decided to set up a wifi router. Once I'd set it up, I connected my other devices to it, (laptop, iPad, iPod, etc.) but when I tried to connect my PS3 to it, the connection just timed out when it was testing the connection. I've tried it a few times - I thought maybe I'd typed in my WPA key wrong, to no avail.
View 1 Replies View RelatedMy linksys wireless router bit the dust, trying to resurrect this old modem for use as a wireless router only. I've got the 2wire 2701hg-d connected to my isp's cable modem and to my laptop via two of the LAN ports. the lac connection gives me internet access (obviously...here i am...) but the wireless connection gives me no internet access...i can log in to the 2wire's firmware via the wireless connection...but i' m not sure what settings (if needed) i have to change.
View 1 Replies View RelatedISP: Dodo ADSL2+ unlimited Wireless modem/router: Bigpond 2wire 2701hgv-w Issue: constant random DSL dropout (reconnection after 1~2 min)
View 5 Replies View RelatedI want a ipad 2 and I have 2wire 2700HGB. It needs a phone jack, yet it is suppose to be wirless. What do need to do. We have our home protection system in the kitchen in it's phone jack.I am so confused! Can I have a wireless connection and a home phone line together?
View 2 Replies View RelatedI have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedNoticed several devices have connected through my home network previously. Not sure how it is done,currently these inactive devices are displayed, i would like to know how can i block them from the firewall just in case it is connecting again?
View 3 Replies View RelatedI have a new 2wire home portal that will not connect to my PC via Ethernet cable. However it will connect to my 2 laptops via the wireless connection. it would not make a wireless connection. but would via the Ethernet connection. How can I get the Ethernet connection working on the new portal?
View 5 Replies View RelatedI just had new att uverse Internet installed today. My other 2 laptops, iPhone, and iPad connect and can browse the Internet. My compaq computer says it is connected to the Internet by 2WIRE but when I open Internet Explorer or Safari it cannot display the webpage. I tried troubleshooting with an att tech support rep and they said I need to contact my manufacturer to resolve the issue
View 12 Replies View RelatedI'm using a 2wire 2701 HG-B (AT&T). Throughout the day (sometimes even 5minutes apart) the DSL light will turn red, the internet will turn off green and 20-40 seconds later they'll both become green again. It's irritating because it sometimes happens so frequently and causes me to close EVERYTHING I have opened in my browser. If I'm on xbox or an online game, it disconnects completely (even if the light is only red for 15 seconds)I have data error stats .tl;dr: 2wire modem giving me problems. DSL light turns red randomly for 20-40 seconds, sometimes up to twice in 5 minutes.
View 3 Replies View RelatedI need to increase range on recently installed 2Wire 3600HGV ATT U-Verse DSL Modem WIFI Router. The signal is weak (1 bar) in my back bedrooms of my home (+/-50 feet from my desktop & 3600 HGV router).
AT&T Tech support worked with me to boost signal of 3600HGV but still weak signal. They did not know about repeater/bridge that would with (compatible) with the 3600HGV router.
I used to have the D-Link DIR-655 wireless router as my wireless home network set-up.
What Wifi Extender will work with a 2Wire 707 380 1HGV?
View 2 Replies View Relatedsince the past week, I have not been able to use my home internet network properly on my laptop. I'm experiencing a really strange issue with it. Whenever I connect my laptop to my home network and try to use the web browser, I get a message from my modem that says that my laptop has been blocked by parental controls and cannot access web browsing. However, this is incorrect, my laptop has full access with parental control restrictions. This only happens when I try to use the web browserWhen I use a third party application such as Windows Mail it works fine.
View 5 Replies View RelatedI have a 2wire 2701hg-b wireless router/DSL modem. Every once in awhile, my wireless devices all lose their connection to the router at the same time. I believe the problem is internal to the router/modem as all my wireless devices' connections are dropped at the same time AND I can only get them connected once I disable and then re-enable the wireless on the router. The problem seems to only affect wireless devices as all my wired devices remain connected and my Internet connection remains intact as well.
View 1 Replies View RelatedI have cable internet can I use 2wire DSL router/modem with cable internet? I need to do wireless in my house?
View 1 Replies View RelatedI purchaseda trendnet 692 GR router because I understood that I would be able to stream from let's say my computer to my TV that is up the stairs. Here is the problem. I did get the router to use my existing 2Wire 2701HG modem.Yes I can connect my Samsung 6100 to the wireless 2Wire but I thought the trendnet setup would work the best.I and Trendnet support set up my router and media bridge and the two do work but my tv won't work through the MB. I have connected to the network but the next part of the connection (the internet) won't connect. I have tried different IP settings that I thought would connect but nothing so far has worked.Also I have taken a 50' ethernet cablefrom the trendnet router to the tv and I do get a connection.I have also taken a laptop through the media bridge and connected to the trendnet router.The customer service at trendnet can't take this to the next level(which is a$40 one session professional service)
View 19 Replies View RelatedI have a dell desktop with win xp i need to activate but cant get online to do so. The dsl and internet lights are on and my nic light is on via the ethernet cable.I went into safe mode to do a ipconfig and i got a internal error request not supported message. I wanted to try configuring the network connection settings but when i clicked on that in control panel when i was in safe mode nothing came up.
View 1 Replies View RelatedI am switching from Qwest to another ISP that has provided me with a modem that is not set up with an internal wireless router. I've been told that I can configure the 2wire 270hg-d to use it as a wireless router that can then be connected to the ISP modem. Need proper configuration settings on the 2wire..
View 4 Replies View Related
