Linksys Cable / DSL :: How To Setup WAG54G ADSL Router Without CD
Jan 26, 2007I lost my CD that I used to do to setup the internet for the router.
View 4 RepliesI lost my CD that I used to do to setup the internet for the router.
View 4 Repliescould it the wireless ADSL modem + AP (e.g., WAG54G) coverage the wireless adapter.If answer is negative, then if both (wireless modem & wireless adapter), close to window, how?Again, if answer is negative, then may via Detachable Antenna of any devices that install out of window builds?
View 2 Replies View Relatedi'm facing a big problem with my access point WAG54G ver 2.0 ,i just bought it from 2 days but i find alot of problems when i start using it ,i have read all the user guide and the quick install to see how to setup the access point and make it work with my adsl.i have configured all things right using PPPOE and putting my user name and password and then save settings then go to the status and press on connect , but it don't connect with me just i find connecting and adsl link : Down and still making connecting and nothing after that and my adsl led is off haven't any colors ,and when i get again to basic setup i found the password that i put it in the ppoe login is too long , not my password i tried to see what is this password and recover the hidden i found it " d6nw5vlx2pc7st9m ".i don't know what is the problem i tried alot of times to change setting and also the same problem.i think that it's a frim ware problem and i tried install a new updated frimware but everytime trying to install it get installing and suddenly stoped and white page appeard and all the access point is stopping and when restart it the ac power.
View 3 Replies View RelatedLinksys WAG54G v1.2 adsl router firmware: 1.02.7
how do I disable SIP ALG on this router?
I have a WAG54G ver 1.2, 4-port eth + wireless adsl router. The latest firmware update on the support download site is Ver.1.02.1 from 05/18/2004 which is ridiculous! [URL] This is the ver I have installed on the router and lt does not even have WDS setting, so the device is more or less useless.I have checked open-source alternatives (the wrt line) but they all start with WAG54G V2 and none support the earlier models v1 and v1.2 I need to somehow upgrade this router to something functional. I have checked the GPL code page as well and while there ls a listing for WAG54g, I think itd for V3 routers. So the question is:
1. Is GPL source code usable on v1.2 (I assume not)
2. any suggestions to get a wds system on the router (including beta / alpha firmware)
Can I add a secondary IP address for LAN interface to manage two LAN in my network?
View 1 Replies View RelatedAll of a sudden, the router's internal ethernet switch has started to get very slow at connecting to local machines. I can observe the connection fading in and out on each connected machine for up to half an hour until it gets stable. None of the settings have been changed lately.When I use WI-FI, the problem doesn't occur.
View 2 Replies View RelatedIs it possible to have multi PVC for IP TV in x3000 adsl router ?
View 1 Replies View RelatedI have a 3G USB modem connected to my desktop and I would like to share the internet connection to other devices wirelessly using the WAG120n ADSL router. How do I set up the IP's manually on the router and my PC to do this? And which other setting do I need to set?
View 1 Replies View RelatedIs there any way I can make the cisco 857 router work on ADSL over ISDN?
View 2 Replies View RelatedIs it possible somehow to use Unicode symbols on X2000 wi-fi+adsl router?
View 2 Replies View RelatedI just bought a Linksys X3000 to work with my ADSL connection (provider is Singtel from Singapore). I managed to use Cisco connection application to logon and setup the router OK, yesterday. I even connected my PC to the router by LAN, and also a few devices wirelessly.At the end of the day, I switched off everything... but next morning, when I booted up the router, I found that all my devices cannot access internet. Upon checking the server (192.168.1.1), I found that it does not have a IP from Singtel, although on the router the internet symbol (globe sign) is lighted up.I rebooted the router twice, getting the same results (note: I waited for a long time each time, until the globe was lighted up).I disconnected the X3000, and reconnected my Netgear DGN2000. It worked (and retrieved an IP address from Singtel). I then disconnected the Netgear and reconnected X3000. To my surprise, this time X3000 got the IP address and then internet is working again.
View 9 Replies View RelatedAfter the upgrade in v1.00.16 Annexe A, I've a problem ADSL sync with the WAG120N, the router don't need the sync, how to back the v1.00.12 Annexe A.
View 1 Replies View RelatedI have ADSL router Linksys X3000, but I have an issue with it. I have configured it properly (based on internet provider's manual), repeatedly checked it, but router still says that ADSL line is down. I have also another router from Zyxel and it works perfect with same wire and configuration, so I guess the line is fine.
PPP generic driver version 2.4.2 79 PPP Deflate Compression module registered 88 PPP BSD Compression module registered 84 PPPoL2TP kernel driver, V1.0 75 ccp_autowan_sm_thread=> Starts in Unconfigured mode, detecting state! 125 ->
[Code]....
I only have access to rather slow connections (256 Kbps). But since I have two lines and two modems, I was wondering if I could bond them together and make a faster one. My main modem is a Lynksys WAG120N Wireless-N ADSL2+ Modem Router, which as you can see is also in charge of both wired and wireless networks at my place. The second one is an older D-Link ADSL modem (JUST modem).Since I have an extra LAN port on my Lynksys modem, I want to know if and how I can connect the second modem, and combine the two rates.
View 2 Replies View Relatedi have Linksys WAG320N and Draytek Vigor 2850. My main router is Vigor, wchich support 2 WANs. First WAN is my VDSL connection (plug direct into Vigor) and second WAN i want ADSL connection. Can I work with WAG320N only as ADSL modem?
View 1 Replies View RelatedI was using Linksys ADSL router ( WAG120) as modem router. Recently I bought new Linksys x3000 and installed a modem router in place of WAG120. Now i would like to connect the both routers to get the signals in first floor of my house.
View 9 Replies View RelatedI am trying to setup a vpn tunnel on my AG241 router but not having too much luck. I am not on a static ip, i sort of get the feeling that as long as i know the current external ip address i should be able to get through to my xp machine with the shares on it.
View 7 Replies View RelatedOn my old router I could access the line stats on the home page giving me Attenuation and SNR margin, this allowed me to keep an eye on line quality, there seems to be no equivalent info on the X2000. Is this on a hidden page like the advanced wireless page.
View 1 Replies View RelatedRecently, i bought a LinkSys WAG120N ANNEX-A to replace my old speedstrem4200. Well everything was fine, but after 2 days of it installed, it started to drop my ADSL connection.
Sometimes, it remain connected for 4-5 hours, then drop, or sometimes, it drop every 30min-1hour.I tried upgrading the firmware to 1.00.16, but no luck, it still drop the connection.I have 3 computer plugged to the router via cable(wired) plus 1 netbook(wireless) and 1 ipod (wireless).Sometimes, when 1 computer is turned off, it seem to make the ADSL connection drop when the LAN light turn off. I noticed everytime it drop the ADSL connection, in the logs, i get this:
Mon, 2010-11-08 22:24:57 - Terminating on signal 15. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_store. Mon, 2010-11-08 22:24:57 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:57 - Enter: tdb_update. Mon, 2010-11-08 22:24:57 - Couldn't increase MTU to 1500. Mon, 2010-11-08 22:24:57 - Couldn't increase MRU to 1500 Mon, 2010-11-08 22:24:57 - LCP down. Mon, 2010-11-08 22:24:58 - Modem hangup Mon, 2010-11-08 22:24:58 - Connection terminated. Mon, 2010-11-08 22:24:58 - Connect time 215.0 minutes. Mon, 2010-11-08 22:24:58 - Sent 50496235 bytes, received 212267122 bytes. Mon, 2010-11-08 22:24:58 - Enter: tdb_store. Mon, 2010-11-08 22:24:58 - tdb_store: calling tdb_update. Mon, 2010-11-08 22:24:58 - Enter: tdb_update. Mon, 2010-11-08 22:24:58 - Doing disconnect Mon, 2010-11-08 22:24:58 - Exit.
I tried changing the MTU settings in the router to 1492 (my ISP default) but didnt work.
Tried changing the MTU to 1492 on every computer and still got the same problem.For now im using the WAG120N in bridge mode, and still using my old speedstream4200 as ADSL modem.
I'm using WAG120N, but suddenly Days back I am experiencing frequent disconnection after every 1-2minutes. After extensive Complains to my ISP (MTNL) they were unable to rectify the problem.Attaching the System Log of WAG120N. [code]
View 9 Replies View RelatedI've got Cisco X2000 and WAG120N. Is it possible to use one of those as a kind of a 'ADSL bridge' on to connected Sonic wall firewall ? How I picture it is that adsl connection is terminating on one of above Cisco boxes, which is connected via Ethernet or wan port to sonic wall, and it's only passing the adsl connection on to sonic wall which in result will end up with my ISP assigned IP address ?
View 1 Replies View RelatedI have a bit of an issue setting up an Cisco 837/SOHO ADSL Router.
Basically what it is is that my Broadband router isnt doing its job very well, and the last piece of the puzzle in the server area is to upgrade the router, and I have with this. Now. I hve followed the setups as per cisco's guidlines very well and doen alot of research on the CLI commands, I have access to the router and have setup the system.
My broadband in the office is Orange/EE and its PPPoA. I hvae all the settings, and such and have followed a set of commands that apply to BT broadband but, It simply hasnt worked in my case. Any CLI commands to setup this router so i'll replace my business livebox.
How i can Block uTorrent in Cisco X2000 ADSL Modem?
View 3 Replies View RelatedI recently purchase WAG120N on a recommendation from a cisco personal, after my long year work horse Linksys AG 241 went kaput.Since I have purchased it WAG120N it is never stabilized on the MTNL ADSL network. There is too much of frequent disconnection. Although I have raised this issue with cisco support # 121128-000336 and 121122-004290, but all they have asked me to replace the WAG120N gateway. [code]
View 1 Replies View RelatedI have bought a WAG320 & ever since I've had it the ADSL line keeps dropping every few hours. The LAN network is fine & I have 7 computers connected to the router wirelessly. When I press the re-set button on the back of the router everything is fine for a few hours then it starts doing it again?
View 9 Replies View RelatedLinksys x2000.Is it possible to use ADSL port as a main internet connection and to use WAN port as a backup internet connection?
View 1 Replies View Relatedhow to switch AM200 adsl modem to AnnexB mode, in Slovakia working only AnnexB
View 2 Replies View Relatedcorrect settings > Configuration of WAG54G2 on etisalat adsl fiber optic
View 1 Replies View RelatedI have reset the router of Cisco 870. I need to connect the router for ADSL connection but don't know how to do it.
[code]...
I recently switched from dsl to cable. I have a e2000 router that I would still like to use. The modem I have is a Motorola Surfboard SB6121. It has no options that I can modify. The modem has a built in DHCP server. However, I can't modify it and I don't like the ip configuration it uses. For the time being I have the modem connected to a switch which is working fine. What I would like to know is how to configure the e2000 to use the modems connection. I used PPPoE for DSL and had login information.
View 2 Replies View RelatedI have a RV082 VPN Router. But my internet connection is ADSL brodband. How can i connect and setup a VPN connection to other RV082.
View 1 Replies View RelatedWe have a router operating in front of one computer which is separate from the rest of the network. Most of the time it operates fine but we find sometimes it loses connectivity, both internet connectivity from the machine and access to the machine remotely. This is not acceptable as the machine is operating rather critical processes and ideally it should be available 100% of the time.
I cannot determine if the fault lies with Windows, the router or the network.
ADSL Connection Type PPPoE/PPPoA
Firmware v1.06
Port forwarding None
DNS Auto
Firewall None
DMZ 192.168.1.2