I was trying to set up an ad hoc network and toyed around with some of the wireless network settings. The network I was trying to set up didn't quite work out so I tried to set it back to how they were but forgot how they were. Is there a way to delete the Wireless Network Connection and let it create a new one or is there a "standard" setting for this to strictly find a wireless network and connect to it?
View 14 Replies
In windows 7 the wireless network tab in the properties of wireless network connection is missing? But I can give the ip address, subnetmask, gateway and DNS etc.,? How can i enable the 'wireless network tab'?
View 1 Replies View RelatedWant to change DNS Server Address on PC. But when I go to change DNS address by going to Network Connections in Control Panel. Select current Local Area Connection and choose Properties, I get an error 'An Unexpected Error Occured'. Have tried resetting network again but still the same error
View 2 Replies View RelatedI have a HP G60 Series. Im trying to bridge connections with my xbox and wifi and i cant because it says "you don't have sufficient privileges to configure connection properties
View 1 Replies View RelatedI have windows XP and my local area connection properties is freezing up ALL the time when I hit ok ,when I enter the ip address and default gateway and subnet manually. I uninstalled my wireless network adapters and disabled my firewall.My main concern is I am trying to get my computer wired for work at home jobs. I used to have it wirelessly. I am using my landlord's ethernet D link router connection from linkysys router to Dlink then to computer wired using an ethernet cable. She has it working for her. She has it going from her son's and it works. My computer says aquiring network address quite frequently. Yesterday it used to say connected but the internet said page cannot be displayed and for the results everything was ok but not the gateway.
View 9 Replies View RelatedThere is no "authentication" and "advance" tab in my local area connection properties. Do I need to do something to get that options?
View 2 Replies View Relatednormally insert the D-link CD in my computer and then follow the steps. this time in the step that all connectivity was being checked the message appeared that one of the cables (ethernet or the other one) is not connected whereas I am quite sure that they are properly connected and nothing at least as far as I know is wrong.after several times, I could connect to the wirelss connection but actually there was no internetwhen I also tried with cable directly from wall jack to my computer it was also the same case.
View 4 Replies View RelatedI did a clean install of Windows 7 64-Bit the other day. I installed all drivers that came with my PC's Hardware, all went smooth. INCLUDING: Installing the original Linksys WMP300N Software/Driver Disc. I'm not sure how it installed, since i have a 64-Bit OS. It says that "This device is working properly", although no "Power Managment" tab came up in its Properties Menu. I had to manually go to the Registry Editor and turn off Some "Power Saving Features", like it auto-turning off. That's all i did an i'v had NO problems with it. Although, I don't use the software, and never have, i prefer Microsofts. I'v also got a second PC with a different Linksys adapter(Non PCI One)working great on 32-Bit Win7. How to get it to work on Windows 7?
View 9 Replies View Relatedsince last nite my router E1200 has been having speed up and down problems.first it goes to 150mb/s then back down to 1 for a few minutes, usualy its stuck at 72mb/s which is a far cry from its rated 300mbps but qi'd rahter have that than 1-2mbps.i'd be happy with 150mbps but that only lasts 5mins then goes down to 1-2mbps and i have to reset my connection.
View 9 Replies View RelatedI have a Linksys WRT54GS (v5) router. I noticed that my firmware was outdated and tried to upgrade it tonight. During the upgrade progress, the browser reset the connection and now cannot access my router configuration pages.I did a hard reset. Then I did the 30-30-30 reset.
The reset worked but no matter what I do, I cannot navigate to any readable page within the router. I get the log in box and successfully log into the router. However, the configuration page(s) are all jumbled and devoid of useful information. It almost looks like a web page that needs flash to be enabled. Lots of colors and boxes but no text or links to other configuration pages
I know it's an old router but it has served me well. I would love to reinstall the old firmware (or new!) and copy my saved configuration file back to the router.Is there a way to access the configuration via a command line interface?
Every night I turn everything off via power strip, including the router. Before I turn off the router, my roku connection is good.In the morning, the roku will work for about 20 minutes, then disconnects, and then I'm unable to find the router.I'll then need to reset my router's settings (I have the WRT54GS), and then uplug, and replug the router.It's important that I unplug the router every night.Is there a way to configure the settings so I don't have to reconfigure the settings every morning?
View 4 Replies View RelatedI was in the Wireless tab>Basic Wireless Settings and then I clicked the "Reset Security" button. I don't know what that did but I've been completely shut out of my connection ever since and I don't know how to fix it. I tried doing the install sequence of the router just now (Clone MAC address, then release and renew DHCP, power cycle modem, router, and PC) but it still didn't work.
View 1 Replies View RelatedI've just managed to reset the WRT 300N to default settings and have setup the internet connection etc and home network ... BUT no matter how I've fiddled with the wireless settings I cannot get any of the laptops or mobile phones to connect wireless to the network.The Windows software on the laptops 'finds' the router OK but for some reason the router seems unwilling to supply an IP address.I've checked ALL of the settings that I can think of, and all are correct ... well, all are exactly the same as my old router which worked perfectly.
View 4 Replies View RelatedI recently added 3 Windows 7 (bit) computers to a network of 5 other XP (32 bit) computers. Initially printers were OK, but now printer properties are "not available". When trying to add networked printers descriptions don't appear and can not find drivers. Tried turning off firewall - no change. Checked services and printer spooler set to automatic and running.
View 10 Replies View RelatedAs far as im aware the current set up of the network is two desktops connected to a router and the router is connected to a switch (i didnt assemble the network) Now what im trying to do is get onto the router so i can change the SSID for a wirless connection.i was told by the ISP i was to change my IP, DG and subnet from DHCP to a static setup they gave me, which i did. but when i go into the browser to access the net (and ultimatly put the IP into the adress bar to access the properties) the net connection fails and i cant get on. when i change back to DHCP the net works again but i cant configure the router with this IP because the company has forgoten the admin/password.
View 2 Replies View RelatedI am trying to update games and that on my Xbox 360 i do not have internet (Landline) only a Mobile Broadband Usb from "Three" i am trying to get online with it. Ive read alot of forums and watched alot of videos and cant find a answer. On most of the infomationn i found it says about Opening the Properties then clicking Sharing Tab but when i tried there was no sharing tab so i dont have a clue on what i need to do.
View 1 Replies View Relatedwhen i right click nic (the double computer icon) properties in my windows server 2003 nothing is displayed. It shows as if it is going to log off but returns as usual without showing any properties.
View 2 Replies View RelatedServer name when checked by right clicking "My Computer" and selecting properties it was A.B.C but when i pinged from client system it showed system full name as a.x.y.z the IP address showed in ping was correct.so how can it be same computer name but different domains?i have problem with .net application connecting to Sql in server from client system.
View 1 Replies View RelatedDevices Used;
WLC = 5508
AP - 3502I
Windows Clients = Windows 7
We are using WP2/AES for encryption and 802.1x for key management for our WLAN. The question I have is, when I look at one of the client's properties through the WLC 5508, then look at the "AP properties", its says that its using; Authentication = Open System, and WEP state = wep enabled. Why would the AP properties have open system and wep enabled when the WLAN is setup for WP2/AES??? There is also a "Security Information" Section just below the "AP properties" section and this lists the correct settings. Are the "AP Properties" irrelevant in this case?
I Connected two connection on my computer. One is LAN connection that is my Office network connection, and another one is USB Wireless device. I was using those two connection on the same computer. Now i office Network admin came and changed the Setting from the LAN Propertied. he removed the default gateway of my server IP address from DNS Server and he gave that ip address to the Default gateway in the LAN Propertied tab. After which i cannot access the wireless. If i change to ip address to the DNS Server my wireless is working..what is DNS Server and Default gateway..... Also i want to know the diffrence between that..
View 1 Replies View RelatedI am using Vista and have only one user accounts.Now I want to prevent changing the DNS server IP. I can prevent changing the DNS server IP or disable the LAN Properties.
View 4 Replies View RelatedI have an old laptop, XP Home with SP3, that I want to give to my kids. I am having trouble getting it to log into wireless. It does OK hardwired with an Ethernet cable to my router. The "Atheros AR5004G Wireless Network Adapter Properties," Advanced tab, the "Network Address" shows blank. It comes up marked "not present".I tried the following from an old thread.
View 4 Replies View RelatedIn my computer. My network places properties did not see lan card.But the device manager lan card driver is enable but it did not appear in the my network place how it enable .
View 6 Replies View RelatedI'm having issues accessing facebook from my system, it worked untill a few days back where its not opening and gives a message "The connection to the website was reset". I have tried every trick in the book. I'm on Windows XP Pro.
1. I tried accessing the site from IE6 opera and mozilla still no luck.
2. I disabled my firewall and antivirus
3. Zonal Alarm and avira
4. I also uninstalled both and tried nothing worked.
5. Im able to ping the site and also did a tracert.I also flushed the dns and winsock.
I have a different problem, after i succesfully erased the spyware protection virus, i cant get in the internet anymore :( it always says "the connection was rest" on firefox and it wont load any site in IE either. what to do
View 1 Replies View RelatedWe have a site to site VPN tunnel that consists off a Cisco 877 at a remote site and a Cisco ASA5510 at the Head Office.
Remote Site 192.168.100.0/24 > Head Office 192.168.0.0/24
telnet 192.168.0.36 25 works
telnet 192.168.0.34 443 works
telnet 192.168.0.202 21050 fails
ping 192.168.0.202 works
The VPN tunnel is working in No NAT mode and allows IP any from each subnet. AD replication works fine across the VPN tunnel and so does telnet from the remote subnet to an exchange/web server at the Head Office.
The device on 192.168.0.202 is listening on the required port as we can telnet to it locally. The device does have a different gateway, but a route statement is in place to use 192.168.0.2 as it's default gateway for 192.168.100.0/24 traffic.
What doesn’t work is a connection to the phone system, we get the following in the logs:
6 Jun 09 2011 22:20:20 302013 192.168.100.1 60759 192.168.0.202 21050 Built inbound TCP connection 5799085 for outside:192.168.100.1/60759 (192.168.100.1/60759) to inside:192.168.0.202/21050
[Code].....
I checked the NIC Properties and the Speed & Duplex only shows the following 10 half, 10 full, 100 half, 100 full and auto. There is no 1000 half and 1000 full. My old gigabit NIC on my old computer shows all, 10s, 100s, and 1000s and the auto. They tried to fix it and even changed the driver but it still is not showing the 1000s. Their option was to change the motherboard with a refurbished one and my computer was just bought just 2 months ago. The original computer had 12GB memory, I7, AMD graphics card, 460 PSU. no blue-ray, no usb 3. The new setup is 16GB memory, I7, Nvidia GeForce GT 550 Ti, Usb 3, Blue-ray, I think 800 PSU.I am running Win 7 Home Premium 64. I have a Gigabit connection from my internet service so I wanted the NIC to go that fast too. The specs shows the computer to have a Gigabit NIC but the properties is not showing the 1000s.
View 3 Replies View RelatedI receive the following error message:The connection was reset The connection to the server was reset while the page was loading The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.I am unable to connect to Facebook on my home computer, but can visit any other site with no problems. I can access Facebook from my work computer. I am using Firefox on both. I only use wifi as I only have a laptop and my router is in my office. I can access Facebook on my phone with my wifi enabled. I have not tried a direct wired connection (will try that next and let you know what happens) as I don't use my office, because it's currently full of junk.
Clearing the cache and cookies
Reinstalling Firefox
Updating Firefox
Changed Firefox proxy settings to "no proxy"
Resetting my wireless router
Checking the Hosts file for facebook entries (there are none)
And still no access. The only way I have been able to access Facebook is by turning the firewall off on my wireless router (Belkin Wireless G). I don't want to have to turn the firewall off just to go on facebook. I am the only person in the house who uses a computer and the internet. So settings have not been changed, because I am the only person with access to change them (password protected wireless network as well).
I just changed my internet provider from DSL to cable. When I hooked up the DIR-615 I had some difficulties. At first my computers would all connect to the router but there was no internet connection. I had to download the latest firmware and install it. After the install succeeded, everything seemed to be okay. However, I now occasionally get the message that the connection to the server was reset while the page was loading. Also, the little world symbol on the router constantly flashes at a rapid rate. Before the switch, neither of these two things happened. When I check the download speed it seems fine. The cable modem is an Arris and also handles my telephone service.
View 10 Replies View RelatedOk starting about an hour ago I seem to be having a problem accessing youtube as well as Facebook & now Microsoft?I have done some searching around and tried a few of the suggestions I found including; trying another browser (happens using both Mozilla and IE), clearing internet cache, unplugging my modem for a minute then plugging it back in, etc, and so far none of these have worked. I did get youtube to work once since then long enough to upload a 10 sec video but once it was uploaded and I tried editing the video details I once again found myself taken to the page that says The connection was reset.
View 3 Replies View RelatedI have been having this problem randomly on and off the last week or so. If I type facebook in any of my browsers it comes back with the connection has been reset. If I use hidemyass I can get onto facebook though. My partner is having the same problem. I haven't got a firewall blocking facebook and it works sometimes and other times it doesn't so I am unsure what the problem is.
View 8 Replies View RelatedEver since setting up this router it has been giving me problems on my laptop, connected wirelessly. At random intervals, throughout the house, an error saying "Connection was reset" comes up in firefox when browsing the web. I've tried resetting the router twice, and updating my network adapter's(Intel 465AGN) drivers. Neither of these worked. No settings on the router were modified, other than enabling the Qos engine. Signal quality isn't the problem either as it is full at all times. On my other computers, three connected through wireless and one through wired, there have been no problems at all and they perform very well.
View 2 Replies View RelatedJust bought myself an ASA5505 to replace a PIX 501, and having transferred over most of the previous config I've managed to get the two IPSEC VPN tunnels working as before.
Unfortunately when I try and SSH to the ASA the connection just resets instantly even when the tunnel is up. It seems as if the ASA is actively refusing the connection, though the log doesn't state this. I had always presumed that traffic over an established IPSEC tunnel was implicitly trusted and not subject to usual access-list rules.
I am unable to SSH to the ASA from the 10.0.0.x range, but I can SSH to a machine on 10.27.0.4 (so I know the tunnel is up and working)
Config (minus irrelevant sensitive information) is attached for reference.
Also - though I'm not sure how relevant it is given the tunnels appear to work - when I enter the line "crypto map meepnet-map interface outside" in config mode the ASA reports "WARNING: The crypto map entry is incomplete!" even though I have supplied the access-list, peer and transform-set variables.
