Network Printers :: Need To Use One Network At A Time
Sep 20, 2012I have two computers both using Windows 7 I also have two printers. I want to use either printer on either computer. There is no other user involved.
View 2 Replies
ADVERTISEMENT
Home Network :: Add Printers To Local Wireless Network Without Sharing From Computer
Mar 3, 2012I have a home network running all Mac computers (though can run Windows VM if necessary) and a pair of USB printers. The wireless router and cable modem are in one room, but the printers are in another. I'd like to find the most practical way to add the printers to the local wireless network without sharing them from a computer. I've tried that for a while, but don't want to leave a laptop connected 24/7 just to enable wireless printing (rather defeats the purpose of a portable computer). I don't have any wired network lines in the home, and am not excited by the idea of running any cables.
View 5 Replies View RelatedHome Network :: Connect 3 Printers To A Network?
Mar 16, 2011I have a home network and I need to connect 3 USB printers. I was searching online and I'm not sure if I needed a network switch, a USB network hub, or a multiport print server. I need all 3 PCs to be able to access any printer.
Here's what I have in mind. I'm just not sure what hardware I needed (red outline). The cheaper the better. Oh and I don't want a 24/7 PC running as a server.
How To Assign 2 Printers On Network With Same Name
Aug 12, 2011I am working to find a new printer on a network. The new printer has the exact same name as another printer in the network? How do I assign a PC to default to the correct printer. It is a very active office so the trial an error thing sometimes takes a long time and also is frustrating because every time I install a new PC to the network (which is often) I run into the same problem over and over again. So how to I get the IP Address of the networked printer? How do I use the IP Address when assigning a new computer?
View 3 Replies View RelatedTwo Wireless Printers On One Network?
Sep 12, 2011I added a new wireless printer and a laptop to a wireless network for a friend but I just found out the original laptop can not print to it's wireless printer. Do you know how you know how to connect two wireless printers to one wireless router.
View 2 Replies View RelatedRenaming Printers On A Network?
Aug 22, 2012I am configuring a few new computers for an office and I would like to rename the printers we have here. There are 2 printers at the front desk that have confusing combinations of numbers and letters for names and I would like to name them something like "front desk color" or "front desk b&w". These computers are connected to a network and accessable from 10+ computers.
View 1 Replies View RelatedDell Laptop Can't See Network Printers
Mar 2, 2011My Dell laptop cannot see any of my printers on my network. I recently installed a new Linksys 160N Router and created a new network on my desktop which runs Windows 7. These are the three computers I have:
HP Desktop - Windows 7
Dell Inspirion 600m Laptop - Windows XP
Compaq Desktop - Windows NT
Prior to installing the new router, all computers could see each other on the network.
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: Intel(R) Pentium(R) M processor 1.60GHz, x86 Family 6 Model 13 Stepping 6
Processor Count: 1
RAM: 1023 Mb
Graphics Card: ATI MOBILITY RADEON 9000, 32 Mb
Hard Drives: C: Total - 72794 MB, Free - 48125 MB;
Motherboard: Dell Computer Corporation, 0X8957, , .D1XM981.CN4864358I4849.
Antivirus: Norton 360, Updated: Yes, On-Demand Scanner: Enabled
Limit Display Of Network Printers?
Oct 17, 2011I am trying to find the file where I can edit what printers show when looking for network printers in Server 2008. In 2003 server is was the NTPRINT.inf, where you can edit what printers populate but in server 2008 I cannot edit this file. Can this be done in Server 2008?
View 1 Replies View RelatedAdd Two Printers Of Different Hp Series To The Same Local Network?
Jan 16, 2012how can i add two printers of different hp series to the same local network ?
View 1 Replies View RelatedCan Ping Network Printers But Can't Connect To Them
Feb 14, 2012In the office we have 3 printers (2 network 1 attached locally to my machine). I can ping all of the printers and no packets are dropped, however I cannot connect to them.I know the printers arent faulty because all of the other staff have no problems printing.I have tried re-installing drivers, disconnecting the printer and reconnecting it etc. and I just cant find what the problem is
View 4 Replies View RelatedConnecting Printers To A Home Network?
Jan 7, 2012I have a cable wireless router in the ground floor lounge and have set up a home wireless network. In the upstairs study we have two desktop computers connected to the router via the wireless network. I have a laptop computer used around the house and garden which also uses the wireless network.A laser printer and an inkjet printer are both connected to one of the computers in the study via USB and are shared with all computers.This means that the computer with the printers connected must by running if anyone requires prints. Both printers have USB and Ethernet ports – but running a network cable to the router downstairs is impractical.Is there a way of connecting the printers directly to the network and leave them powered up so they can be used by any of the computers. I am hoping that there is some extra hardware that will enable me to do this perhaps via wireless.Or – would it be possible to use mains Powerline Network adaptors – with one adapter connected by Ethernet cable to the router and other adaptors connected by cable to each printer.
View 4 Replies View RelatedUnable To Access Network Share And Printers?
Mar 6, 2013every once in awhile we have a machine that seems to just lose the ability to access network shares and networked printers. The way I have been "fixing" the issue is to join a workgroup temporarily and restart computer and rejoin the domain.
I understand this is probably not the best fix available, but I am not sure what is causing the problem and/or what a better solution to this problem is.
why this happens and how best to solve this without just rejoining the domain?
Connecting Multiple Printers On Same Wireless Network?
Sep 12, 2011I added a new wireless printer and a laptop to a wireless network for a friend but I just found out the orginal laptop can not print to it's wireless printer. Do you know how you know how to connect two wireless printers to one wireless router.
View 3 Replies View RelatedServers :: Script To Map Network Printers In Windows 2003
Sep 22, 2011I need to create a login script for all users. I am running Win xp Pro and Win 7 on my domain. the Server is windows 2003.
View 1 Replies View RelatedSpeedtest Upload Fails And Network Printers Not Printing
Nov 25, 2012I have a major wired network issue.It manifests itself as not being able to print to my two home network (wired) printers and speedtest upload test fails.I can disconnect the ethernet cable from the failing desktop and plug it in to a laptop and everything works fine.I have tried disabling AVG firewall.
View 2 Replies View RelatedNetwork Printers Disappear After Logoff - Logon To Terminal Server?
Feb 8, 2012I have an annoying problem with networked printers disconnecting/disappearing when TS users logoff. Current configuration is: SQL server (WinSvr 2K8 R2 Std) has printers installed on it (standard TCP/IP Port) and printer is shared, there are also some printers installed on the DNS server and a couple of satellite offices. Users connect to TS servers (WinSvr 2K8 R2 & WinSvr 2K3) printers are connected and work fine until they logoff, when they log on the printers are gone "sometimes some printers are still there!?" I have tried logging onto the server as domain administrator and connecting printers but they won't even stay for administrator (have had this with win7 client machines) and tried directly 'console' at the server. I have looked at the printers on the SQL server and sharing properties, it is stoping printers from coming back at login on TS Note that local (client machines) connecting to the same shared printer from the SQL server don�t have the problem it's just on the TS server.
View 2 Replies View RelatedCan Access Network Drives / Printers If The Host Computer Is On The Welcome Screen
Mar 28, 2011Can I Access Network Drives/Printers If The Host Computer Is On The Welcome Screen, Or Does It Have To Be Logged Onto An Account.
View 1 Replies View RelatedAdd Wireless Router For Visitor Access To Internet And Network Printers?
May 9, 2012I have a Comcast SMC8014 cable modem connected to a Linksys BEFSR81 Router and a Netgear Prosafe 24-port 10/100 switch connected to one of the LAN ports on the router. There are many PCs connected to this network, including one used as a file server. I would like to add a LINKSYS WRT54GL wireless router to this mix to allow visitors wireless access to the internet and network printers but NOT allow access to the file server
View 7 Replies View RelatedAccess Internet Using Wireless Network And Printer Using Separate Wired Network At Time?
Apr 4, 2012I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies View RelatedD-Link DIR-655 :: Wireless Network Gets Slow Time To Time
Sep 1, 2011i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
System And Network Time Do Not Match?
Feb 24, 2011This is happening to me to multiple computers on my domain. When it happens i can only log in as a local user or if I unplug the network cable, log in and then re-connect the networkThe time on all these machines is correct within at least 1 minute but still it's throwing off this error. When reading about this problem I see many fixes that all relate to how to sych the time on the PC.
View 1 Replies View RelatedHow To Connect Two Wifi Network At Same Time
Dec 21, 2012i have two networks accessing through Wi-Fi..if u want to access resources of A network from B then what should i do...means i have installed SQL database server on A network & want to access on Network B
View 1 Replies View RelatedHome Network :: Two Computers Can't Be On Router At Same Time
Aug 13, 2011I'm using Comcast cable. I have a motorola cable modem. I run that into a Netgear 8-channel router with wireless (that's 8 physical network sockets).I have had these devices hard-connected to the router up until today and everything has been running fine:
* My Desktop (desktop running Windows 7 with Gigabyte motherboard and built-in Realtek NIC)
* T-Mobile VoIP device
* My Laptop (old Alienware running XP with generic NIC)
Today I took my old desktop motherboard from a year ago (Gigabyte motherboard, but not the same as My Desktop, built-in Realtek NIC), gutted it out, replaced the hard drive, got it running Windows 7 and set it up for my kids. Got it connected to the Internet early this morning when my machine was off and it ran fine.While it was updating, I fired up My Desktop and the router stopped working, all machines lost Internet, and I was at a loss.After some troubleshooting, it turns out that if I have My Desktop and the Kids Machine connected to the router and running at the same time, all devices on the router lose connection. I can have the Kids Machine on with the T-Mobile device and My Laptop and they all work. I can have My Desktop on with the T-Mobile device and My Laptop and they all work. But as soon as My Desktop and the Kids Machine come on together, everything gets hosed.The router is set to reserve different IP addresses by Mac Address for every machine. And I've verified that My Desktop gets its IP address correctly, and so does the Kids Machine. They are different IPs.I (usually) know just enough about networking to get a home network set up.
How To Calculate Network Convergence Time In OSPF
Feb 2, 2012I want to measure the the ospf convergence time on the given network topology (assume 5 nodes - partial mesh topology).I am using quagga software as routing software on linux box. Quagga is runnign fine and network is converged, able to see all the routes.. Quagga software is logging all the osfp information includign packets,state machines,etc.I am going to disconnect a link between node a to node b. and i want to measure the convergence time of the network.What is the network convergence time?My answer is, The time taken to reflect the topology change (link down/up, network condition change) to all the routers on the topology.Some routers(close by routers to the topology change) will get converged fast, and some routers(far away from the topology change) will have the higher convergence time. we have to take the highest convergence time of the router on the topology and we can says thats the ospf network convergence time.
View 2 Replies View RelatedSee Who Logged On Network At Any Time During The Day / Week / Month?
Sep 13, 2011is there a way to see who logged on my network at any time during the day/week/month?
View 1 Replies View RelatedNetwork App Very Slow Unless Copy Files At The Same Time
Oct 5, 2011Basic info: SBS 2008 (64bit), XP-sp3 (32bit) workstations, gigabit switch, SEP. App is Sage Masterbuilder.Network config: Server is 1gb to switch over CAT6. All the workstations are 100mb over CAT5. SEP is set to exclude all pertinent files on both the server and workstations.Problem: The program is called MasterBuilder and does job costing and much more. In the job costing feature there is an option to "Compute" job costing. In version 16.x, when the "Compute" was performed the task was done very quickly. After an upgrade to version 17.x it is very SLOW. According to tech support, our network is at fault since it is a database function over the network.Troubleshooting done: Tech support blamed our network speed (100mb) and switch. We had a Netgear 100mb switch so we replaced it with a GB switch however the cabling will not support GB. Being a managed switch I set all the ports to 100mb except the server port. Even tried the server plugged into a 100mb port and no change. I am confident there are no speed issues on our network. All other programs perform flawlessly. ACAD, Exchange, data transfers and many other high data use programs work perfectly. I updated the network card drivers in the server as well. There are no performance or resource issues on the workstations. I monitored the network traffic at the workstations, server and switch with no issues and about 2.5% utilization during the slow "Compute" process. The switch shows no errors at all, no collisions, no dropped packets, nothing. I also disabled the SEP.
During testing and while the slow "Compute" was going on, I copied a large folder (400mb) from the server to the workstations see the impact on network utilization. As soon as I start the copy process the "Compute" process speeds up to normal and zips by as it should. As soon as I cancel the copy process the "Compute" drops right back to very slow.
Home Network :: How To Connect Two Lans At Same Time
Apr 11, 2011I have my PC in my office with two lans,, one, the internal lan of my company with a static ip address, the other one a broadband line for connecting to internet.. If i switch on both the lans at the same time, i am able to use the broadband lan and the internal lan stops functioning,, to make it work i need to disable the lan with broadband line.. i even tried bridging the lans but that again stopped my internal lan. way to connect both the lans at the same time so that both the networks work simultaneously... and if there is any other option to function two lans on a single PC at the same time.
View 19 Replies View RelatedRouters / Switches :: How To Use 2 Network Adapters At A Time
Mar 20, 2011I have 2 network adapter on my PC , but i cant use this 2 internet connection at a time, these connections are taken from main router. is it possible to increase my internet speed ? . i can use each connection seperatly, if one connection remove another will work,
View 2 Replies View RelatedTracking Reoccurring Slow Network Time Period
Apr 25, 2012Every other day and sometimes everyday I have an issue where my network slows down in one area at around the same time of day 12:00pm. I am using Solarwinds and I don't see anything significant showing up.
View 2 Replies View RelatedFind The Time To Check The Network Layout Attached In The PDF?
Nov 9, 2012Time to check the network layout attached in the PDF. This design is regarding a new redundant DC being built (hypothetically only) but I need to know if I've connected this in the right way/ if its possible with the equipment listed and how I've put them together. [CODE]
View 3 Replies View RelatedPossible To Have Wireless Internet And Hard Wire Network At Same Time?
Feb 13, 2011I have a curent cable connection that is fine connecting two computers through a router and it is wired. I have a new Iphone and some programs "documents to go" for example won't sync to my computer thru USB cord it wants a WiFi connection. Can I have both a WiFi and wired conection on same cable connection? I'm asuming if I get just a WiFi router, I will also have to get new nic cards for desktops, when all I really want is something for the Iphone to WiFI thru
View 1 Replies View RelatedDetect System Time Change On Network Workstation?
Dec 15, 2011Is it possible to detect a system time change on a workstation on a network? There is suspicions that there is someone trying to use their system time as an excuse to go to lunch early at work, "but my computer says its 1 O'Clock" When everyone else's computer displays 12:48.......
View 1 Replies View RelatedCisco :: 3750G NTP Getting A Network Time Server Appliance
Oct 12, 2012We want to get a network time server appliance that will be used only as a device to provide time to network devices as well as workstations. Our network infrastructure contains CISCO 3750G's, 4506's and 6509E.
View 0 Replies View Related
