PCI Wireless Card Causes System To Stutter?
Sep 25, 2011
My old system developed a stutter. It would freeze for a half-second at a time in short bursts. The stutter would appear off and on at random, and went on for a good year, coming and going. I couldn't locate the source, but it seemed to get worse when either the graphics card or the sound were called on heavily. Near the very end, the hard drive started getting corrupted, more and more swiftly. I had to replace my machine.So I created new, a fresh, home-built system:
* Asus P8 Z68-V motherboard
* Intel i5-2500k
* 16 GB RAM
* Radeon 6850
* 465 GB WD platter hd
* 128 GB SSD with a fresh install of Windows 7
After completing the installation of Windows, I brought over my old DVD drive, my old wireless card, and my old hard drive. I copied my old data to the new drive, and was relieved that I was able to do so successfully. Almost immediately, I began to get the stutter again! I did some troubleshooting, and discovered that the stutter went away when I pulled out my wireless card. I tried switching it to a different PCI slot, but the same thing continued. When I was able to test the machine with an ethernet cable plugged directly into a router, the stutter was gone. I bought a fresh wireless card, but the same thing happened immediately.
View 8 Replies
ADVERTISEMENT
Mar 13, 2012
Just built my new system and when I installed my network card drivers and utilities, a message comes up ASUS Wireless LAN card is taken apart from your desktop PC.
View 1 Replies
View Related
Dec 26, 2004
I have a wireless card that causes my Inspiron 5100 to lock up about once a day. I have tried 3 different types of cards (Netgear, Microsoft, Dell) all with the same result. I have a laptop cooler because I thought that the heat might be causing the problem - not the case. If I leave the wireless card out the lockup does not happen.
On a side note...I have tried to update the BIOS on my computer. When I download what seems to be the appropriate file, it tells me that I don't have the appropriate file.
View 20 Replies
View Related
Jun 29, 2012
Computer was hooked to router by cat 5. System worked fine. Due to network configuration changes I had to switch to wireless. Now the Mouse is jittery, delayes in movement and freezes.
OS: Windows 7 Ultimate 64
Ram: 16Gb
Mouse: Razer Naga Epic
Adaptor: WUSB600N Vs 1
MB: ASROCK Extreme 7
Processor: Intel 2600K
Video: ASUS ENGTX 580
View 5 Replies
View Related
Aug 4, 2011
I recently replaced my Linksys WRV54G with a Linksys e2000 where I stream H.264 vido in 480p from one computer connected over gigabit to my Media Center running on Windows 7 64 bit connected at 10/100.
Before the router change, I was able to playback video over the network with no problems. If I connect the Linksys WRV54G again, the issue goes away. The Linksys WRV54G does not have gigabit and I have read related issues of video stuttering over gigabit.
View 4 Replies
View Related
Oct 14, 2012
I am facing problem with 7600-ES+20G3C card / Any system reset will change the system operating mode
View 2 Replies
View Related
Apr 20, 2012
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies
View Related
Jun 30, 2011
I'd like to add another computer to my wireless system but don't remember my password - what can I do?
View 1 Replies
View Related
Feb 14, 2013
My old Actiontec M1000 modem recently died and my HP nc6120 with windows XP can not connect to the wireless network through the new Actiontec C1000A model.It connected wirelessly through the old M1000 moden. Window icons on the screen indicate no wireless network is detected. When I view the available networks and log in to the assigned network with its password, it looks like it is trying to connect but does not. It will connect through the ethernet link-up. I don't have any other wireless devices to connect to the network. I have updated the drivers for the wireless card through HP. I have taken the HP nc6120 to the Geek Squad and the wireless card connects with their network. I seem to have a compatibility problem with the old HP with its XP windows operating software and the new modem system. I have tried to reset the ip addresses, but this has had no effect. However, I do have purchased AVG protection software operating on the system, which I am not sure how to shut off. Is this a problem with a too advanced modem for an old style HP with an XP operating system? Is there a modem that I can downgrade to if it is? [code]
View 3 Replies
View Related
Nov 24, 2012
I have a links wireless system, I am trying to make this a secure connection. I have gon into the property settings and everytime I try to set the security to wpa2 or even wpa it I lose my internet connectivety. I can't get the security key needed.
View 1 Replies
View Related
May 29, 2011
I'm trying to connect another computer to our household wireless network. I have the security key but I can't get a window to come up asking for it when I click on our family network. How do I get a box to come up asking for the key?
View 3 Replies
View Related
Sep 14, 2012
I lost my password to connect to a wireless network. Where do I find my passwork on my computer?
View 1 Replies
View Related
Jul 12, 2011
I'm trying to add another computer to an existing, wireless system. I followed the directions I found online, but when I get to the point where I'm supposed to "take note of the numeric code beside the Default Gateway icon", no such icon, and no code, is present. By the way, I'm attempting this from the current, wireless computer.
View 1 Replies
View Related
Sep 28, 2011
I'm looking to upgrade my router and add a wireless card to my system. That way I can take my system a couple rooms over from my modem to where my tv is.im gonna posts my system specs incase that effects what card I get. [code]
View 2 Replies
View Related
Jan 21, 2013
802.11n wireless adapter not being detected by the system
View 1 Replies
View Related
Feb 28, 2012
How can i access a cd rom from another machine in a wireless network while both machine using ubuntu linux
View 1 Replies
View Related
Feb 4, 2012
I did a System Recovery after my computer had the virus that redirected me to a pop ups and different websites every time. After System Recovery I no longer have internet connection on the computer I used. All the other devices and computer can access my router but not the computer that I've used System Recovery on. I looked at Device Manager and all of my Networking Devices are working properly. I even looked at Wireless Zero Configuration and the Startup type is Automatic and the Service Status is Started.I go into Network Connections and my USB Adapter has an red X on it. I right clicked properties and looked at wireless networks and the preferred networks is grayed out[CODE]
View 3 Replies
View Related
Jan 16, 2011
I have been having a few problems with my IBM T42 Laptop for a while now. I was originally running Windows XP on this system and about 12 months ago I installed Ubuntu 9 on it to mess around a bit with the OS and have a basic, non-Microsoft laptop in the house that I could use for browing the web and IM, etc... The laptop needed a clean install anway as Windows XP was running like a dog. Originally it was dual boot but once I got happy with Ubuntu I did a clean install and everything worked reasonably well. I had a few issues with the wireless LAN adapter and compatibilty, but sorted it out following a few forums (firware updates, driver updates) and everything was great. I upgraded to the Ubuntu 10.04 OS and then started having some issues. Essentially my browser would freeze randomly. Again, I visted the forums and had no joy in sorting out the problem. I reverted the OS back to Ubuntu 9 and the problem persisted. So I gave up on it totally around 6 months ago.
Last week I fired up the laptop again and decided I would use the IBM restore utility and the disks I created a couple of years ago to put on a clean install of Windows XP and see how things went. So far I have done all the Windows XP updates (SP3, etc...), I have been to the Lenovo website and updated all drivers, firmware, BIOS, etc... every little problem I have had has been sorted with a software or firmware update which I have successfully implemented. All niggles have been sorted bar one.The only problem I have left now is very odd. Everything works fine and at reasonable speed considering the age and specs of my system. When I connect via cable to my router/modem all network and internet services work fine. I have had no issues. But when I connect via wireless, intermittently my system will completely freeze - no errors, no logs - nothing. No sounds, just frozen screen. Hard reboot is the only thing that I can do to get back online.Further investigating the issue - the freezing occurs when I click on a link to download something. I can browse anything - I have tried videos (youtube) and have no problems at all - but if I click to download a file (software upgrade pack, pdf document, Qucktime player) the system freezes up and ONLY when connected wirelessly via the inbuilt Cisco Wireless LAN adapter. [code]
View 1 Replies
View Related
Dec 11, 2011
I have Wi-Fi on my smartphone and I want to set up another lap-top and it is asking for a security key, where do I find it ?I already have one lap-top set up !
View 1 Replies
View Related
Jan 1, 2012
I've tried everything possible to connect my blu ray player to my network. I've tried the auto setup, manual entry and cant come up with anything. I've followed all the instructions i can find on-line and i don't know if I'm overlooking something or what. I've got Philips blu ray home theater system and linksys wrt120n router
View 5 Replies
View Related
Sep 4, 2011
I have an older D-Link DGL-4300 wireless router, I've purchased a wireless home security system and can't seem to get the 2 connected. I've tried resetting the router & modem (powering down & waiting from 1-5 minutes), and my router just won't read the port that I've plugged the security system ethernet cable into.I think the problem is my firewall but I don't know how to set it to allow the router to read the port that I've plugged into, or it could be the firewall that my anti-wirus has or possibly both.My equipment is Comcast cable, router (as noted above) and a D-Link DCM-202 modem, Windows XP 3, and Norton anti-virus. Now I also have my phone through Comcast and it has it's own modem.
View 7 Replies
View Related
Jul 18, 2011
Ive got an E system 3087, it had a virus and got restored but now wont connect to my wireless router which is an Echolife HG520b Broadband Wireless router. It is recognised on the laptop but when i have typed the network key in it constantly says aquiring network address and keeps connecting and disconnecting. The router is still connected to my iPhone and PS3 fine, its just the laptop. I have done the usual, switching everything on and off and re typing the network key but nothing has worked, it normally asks for our password when we're setting something up with the router
View 4 Replies
View Related
Oct 9, 2012
I am looking for a centrally managed wireless hotspot system. But the system has a few requirements. I have been looking around but so far I have not found a system that ticks all the boxes?
-The system (AP's) needs to be centrally managed (except for the internet connections, each site will use its own outgoing connection to the internet).
-The system needs to have some kind of ticket system for guest access (hotspot).
-It also needs to be able to identify employees so they can pass through without needing a ticket, everywhere they go.
View 1 Replies
View Related
Dec 29, 2011
How do I add the ip information for a wireless system on a acer laptop with Vista.
View 1 Replies
View Related
Jun 12, 2012
I might have to reboot my operating system, I have a Cisco wireless router, so I have to reset it, and set it up again after i reboot my operating system?
View 8 Replies
View Related
Oct 25, 2012
I have a Gateway MX6124 laptop. I used the Syetem Recovery disk that came with it to reinstall the opperating system. It was running slow and I just wanted a fresh start. The wiresless connection was working fine.Now ... even though I have reinstalled the os twice, there is no wireless to be found. I do have an indicator light that says it's on. There is no Windows Mobility Center available in the Start menu All Programs.
View 1 Replies
View Related
May 28, 2011
How do i install the WMP300N without the installation CD ? I bought a new PC and i cant find the CD?
View 7 Replies
View Related
Feb 11, 2011
I recently purchased two of these units. One used with a quad core AMD rig and another with a single core AMD rig. Both systems are running Windows 7 but the older single core system is having issues. I noticed that I keep hearing the sound of a USB device being disconnected but wasnt sure what it was until I noticed when I try to copy large files over wireless the AE1000 disconnects from my system like I've unplugged it. I've swapped the two units and it didn't solve the problem. My newer quad core doesn't experience the issue at all. I've also tried different USB ports but that doesn't solve the issue either.
View 9 Replies
View Related
Mar 23, 2013
Region : Philippines
Model : TL-WR740N
Hardware Version : V4.20.0
Firmware Version :
ISP :
I am having troubles configuring TL-WR740N. After I connect everything and turned in on, the system Light is ON and the power light is also ON and nothing else. I Connected my laptop to the 1 of 4 LAN ports and the WAN to my modem.
View 2 Replies
View Related
Mar 13, 2012
May the air-cap3602 work in autonomous system? or only with a WLC?
View 5 Replies
View Related
Jul 1, 2012
we want to have full wireless coverage in a big warehouse (120mx90m) and 15 meter Height that will be having big racks (14 meters height) and 2 meter between the racks and the rack itself is 1.5 meter (2 rack back to back), now we will be having scanners and we need to make sure the wireless is covering everywhere.Where is the best place to put the AP, Ceiling? How Many APs per row ? each row will be around 60 meters length.
Is AP 1252 a good choice? The scanners are a/b/g.What i'm thinking of is to put 1 AP per row mounted on the ceiling and antennas facing down because it is hard to mount the APs between the rack because of the automated racking system.
View 12 Replies
View Related
Jun 26, 2011
I have a customer with a linux OS machine running Cisco Wireless Controll System.
He needs are to add a new wireless AP with the following features :
- compatible with most laptops
- exterior conditions "resistant" (sun, rain...)
- reasonnable performance (the AP would be a a roof with people on the roof itself, max distance : 15 meters, no walls)
I saw the WAP200E but I have no idea, if it is compatible with Cisco Wireless Control System
View 2 Replies
View Related
Jun 23, 2011
I tried to use the Dell on a local wifi system with no luck and now I've done something and can't log into the computer. I've tried every user name and password I can think of.
View 2 Replies
View Related