Cisco Wireless :: WAP200E And Wireless Control System
Jun 26, 2011
I have a customer with a linux OS machine running Cisco Wireless Controll System.
He needs are to add a new wireless AP with the following features :
- compatible with most laptops
- exterior conditions "resistant" (sun, rain...)
- reasonnable performance (the AP would be a a roof with people on the roof itself, max distance : 15 meters, no walls)
I saw the WAP200E but I have no idea, if it is compatible with Cisco Wireless Control System
View 2 Replies
ADVERTISEMENT
May 8, 2011
I want to control a system through a communication network (means sending and receiving data through network from system to controller and controller to actuator), but I do not know how I can do this?
View 1 Replies
View Related
Oct 23, 2012
I am developing the system remote control desktop from mobile phone through internet. I want how the connection is established between mobile phone and desktop through internet? What is the exact process of connection and internal structure of connection
View 1 Replies
View Related
Jun 6, 2011
how to power a WAP200E. In the datasheet it mentions it supports POE, however the customer does not have a POE switch and for one WAP220E is not willing to purchase.
What other options do we have? Is there a power supply for this AP?
View 4 Replies
View Related
Jan 15, 2013
directional antenna for the WAP200e.
I've been googling but can't seem to find a product. I have found omni-directional but no directional antennae
View 2 Replies
View Related
Sep 9, 2012
I want to know what is the maximum range of WAP200E. I found in an overview of the family of access points "CISCO SMB" that could reach up 4kms. Is that true?
View 3 Replies
View Related
Sep 17, 2010
I'm trying to bridge two buildings with two WAP200E. The connectivity is fine, but I'm only able to get one VLAN through the bridge. That is the default VLAN 1 wich is untagged. I have two additional VLANs wich is tagged. I can not get these two through the bridge. I have set up a single SSID, and enabled VLAN. I have also tried to set up more than one SSID, mapping each VLAN to separate SSID's, but bridging several SSID's between two AP's make the AP's loose connectivity periodically. What would be the propper way of bridging several VLANs between two WAP200E ?
View 1 Replies
View Related
Mar 1, 2009
I am having trouble with an pair of WAP200E's. The bridge between them stalls, found that one of the AP wireless LED don't show any activity. After powercycle the stalled AP, the bridge works again for a day or two. Have tried to replace the AP's still the same issue
Firmware is 1.20a
View 15 Replies
View Related
Apr 19, 2012
Just setup two WAP200E's, the bridge is "Connected" as I look Status > System Performance in both WAP's. However, I cannot get to the LAN from one network to the next. Cannot even ping the WAP's from either side.
I already have two WAP200E's on this network, that have been working well for month (164 day uptime), and they are configured with a wireless bridge between them, both networks on the same LAN (same 192.168.2.x network on either side). The bridge names are different, different from the main WiFi in the building, too (if it makes a difference), and the static IPs the WAPs have don't appear to have any conflicts on the network.
This is actually three buildings, one is the main one with a Cisco SR520 for a router, and a Cisco SF 200-24P switch. So two WAP200E's go into this switch now, and I see them both fine when going into the management interface. Then each of the other buildings has one WAP200E, and a small Netgear 8 port PoE gigabit switch at each building to power the WAP.
The Netgear switches aren't managed, and I've made sure any features like STP, VLANs, etc. are turned off. And the Cisco SF 200 switch is set at auto and all the defaults mostly, particularly for the ports. I tried doing a SmartPort for this latest WAP200E and that didn't change anything, tried disabling STP for it too, and no change. The PoE port for the working WAP200E is identical in config to the PoE port for the new WAP200E, and both show forwarding, all VLANs admitted (none are enabled, no VLAN tagging, etc.).
So now I am wondering if I can have two WAP200E's into one switch? Or two bridges on the same LAN subnet? Or is there something else I am missing or should configure?
View 1 Replies
View Related
Apr 23, 2012
WAP200E access point that causes it to reboot after anything from 15 to 20 mins .I have run it off an injector and a POE switch, updated the f/w to WAP200E-ETSI-FW-2.0.3.0 and it still reboots itself .I have even been sent a new one from the supplier and it does the same thing.
View 5 Replies
View Related
Aug 18, 2012
I purchased a Linksys WAP200E Wireless-G Exterior Access Point – PoE and a HGA9N (9dBi) High Gain Omni-Directional Antenna through CDW Canada about three (3) years ago in April/2009. The first year it worked great and gave complete coverage throughout the Campground. The second year it started to become increasing less coverage and now in the third year, it has very poor coverage. I have purchased and installed a new Microcom HG2415U-PRO (15dBi) HyperGain Outdoor Omni Directional Antenna. This has NOT made any improvement so I am now thinking that the WAP200E Access Point is the faulty equipment. I have changed the channel to number 11 and still no improvement. The Signal Strength is only Good and then dropping to Fair and sometimes no signal at all. This is from a line of sight location that is only 60 yards (180 feet or 54.9 metres) away. There are no objects between the Antenna and the computer.
View 3 Replies
View Related
Jan 7, 2013
I have 3 WAP200e APs in a client site and I am having a problem with the signal between the APs and Motorola 9000 barcode scanners.The first one went in about 6 months ago and it worked fine. The client then asked for two more to be installed in a couple of rooms adjacent to the room where the first AP was installed. They use barcode scanners with these APs and since the two new ones were installed, the first on is dropping the connection to the scanner. I have turned the new APs off and everything is back to normal. I have reduced the power output of the two new APs and the situation has improved, but they still get problems, especially on Monday morning, where it won't work at all for the first few hours, and then bursts into life and works fine for the rest of the week.
View 7 Replies
View Related
Jun 7, 2011
Is it possible to connect two WAP200E on bridge mode without external antennas if they are 200 mts. (219 yard) apart?
View 2 Replies
View Related
Jun 9, 2011
i would like to know if wap200e will still have connection if there are trees in between. because we have 2 offices that is 200 meters apart and trees all over them. i just wanna know before we buy the unit.
View 1 Replies
View Related
Oct 25, 2012
I have a problem to connect my WAP200E to SW2960. What is my mistake?Both are POE. I connect only Wap200e to SW2960 and I check the 15.4watts, but I suposed that WAP 200E doesn't respond, because WAP 200e doesn't turn on.I need to put to grown, or put some device before on connect to SW2960 to WAP 2000E.
View 10 Replies
View Related
Nov 7, 2011
Because of a connection problem, I would like to know where I can see the clients associated to a WAP200E AP and the signal level of each client.
View 1 Replies
View Related
May 5, 2011
I am currently at a standstill when it comes to our desired set up for the following:Originally we purchased an iPad app called Luminair, which works as a DMX board. The idea was to be able to control a set of light fixtures hard lined into a Linksys WRT54G router, which would then allow us to control the lights with the iPad and the Luminair App.After quite a long time and a lot of different settings, I've found myself at this point:We recently were able to connect and control our lights from DMX Workshop, an application running on a Windows 7 64bit connected directly to the fixture through a standard ethernet cord. Both the computer and fixture are set at a 2.x.x.x IP address and a 255.0.0.0 subnet. To allow the two systems to connect andw work with each other, the speed had to be throttled from 100Mb to 10Mb.
I've now tried to introduce the Linksys WRT54G router in between the computer and the fixture hard lined with ethernet cables. My hope is to establish a connection with this setup, and then swap the computer for the iPad.Is it possible to set up the Linksys to a 255.0.0.0 subnet? And do you think it needs to be at this subnet and a 2.x.x.x IP to allow it to work?Also, is it possible to throttle the speed in the router to 10Mb as well, because if it is trying to connect at 100mbps, I am confident it will not work.
View 1 Replies
View Related
Jun 21, 2012
I'm using 4 wap200 cisco AP, 1 wap200e linksys AP and 1 cisco sf300-24p switch. Every AP has 2 SSIDs,one is for clients and one for mobile devices.I have updated the equipment to the latest firmware but I still encounter the same issue. The mobile devices go through APs and once every 2 days, my wap200e blocks its lan interface. I suspected a stp issue, because the switch was seeing MAC addresses coming from different ports.So I disabled STP on the switch and on the AP. The annoying thing thing is that none of my other antennas get cut off.I tried replacing it with a cisco wap200e,same issue.
View 1 Replies
View Related
May 17, 2012
I have a fairly simple WLC 2100 configured to control two APs. We had a power outage a few days ago, and though the WLC was on a surge protector, it did not come back up properly after the outage. The STATUS light sticks at amber and I can't get any console response. At this point I'm not sure what to do except replace the WLC, though I'm loathed to do that as our budget was just cut substantially for next year and we're trying to turn nickels into pennies.
View 4 Replies
View Related
Apr 24, 2012
I have a question regarding the number of computers connecting to a single wireless router. I want my internet connection at home to be used only by my laptop. I have my connection secured by password and etc, but I was wondering if there is a setting I can use to control the number of computers connected to a wireless router?
View 2 Replies
View Related
Jan 8, 2011
just i purchase cisco access point and I tried to access control panel to setup wireless security but the page i issued not display 192.168.1.245, there is any wayes to connet device web base ??
View 4 Replies
View Related
Oct 10, 2011
Sports bar with many Tv's playing differnet games, want the ability to have tables select the tv and hear the audio for their TV,Each table to have set of small speakers and a dial to select the tv.
View 1 Replies
View Related
May 26, 2011
I just installed Windows XP Professional on my Toshiba-X205 laptop and I am having a problem getting the OS to detect my NIC. I can not remember how to go into the control panel and configure settings so the OS will detect my wireless network or should i say i can not get my OS to detect my NIC so i can to connect to my wireless network. I think i may need to install the device driver for the NIC but i don't remember which driver i need for the NIC of my laptop and i can not find it on the Toshiba website, not supported anymore.
View 1 Replies
View Related
Mar 22, 2011
I am trying to connet to the internet but it keeps telling me the radio on my 802.11 network adapter is still disabled. Use the hardware radio control switch enable it.I have had this laptop since 2004, I was on the internet before I got my new gateway laptop with vista windows. I went an turned on the emachine laptop and I don't no how to connect back to the internet. This has windows xp on it. I use to be able to run both machines.
View 1 Replies
View Related
Nov 3, 2012
problems with laptop, one of which is i am unable to get wireless connection again, no network connections are appearing in control panel?
View 5 Replies
View Related
Dec 15, 2011
I have a Toshiba Tablet PC that came with the configfree software. It worked fine for a while but then it started giving connectivity problems. I tryed to disable Configfree by all means possible to no avail. Then I decided to uninstall it successfully, but I still can't return the network connections control to windows. It seems like it is still under configfree. My guess is that some internal switch at the registry level is still saying that the wireless control is not windows.
View 1 Replies
View Related
Nov 17, 2012
Region : UnitedArabEmirates
Model : TL-WR941ND
Hardware Version : Not Clear
Firmware Version : 3.13.9 Build 120201 Rel.54965n
ISP : etisalat.ae
How to controller wireless bandwidth in WE941ND.
View 5 Replies
View Related
Jan 27, 2012
I have connected the USB drive. I can copy file to the drive, but I have not figured out how to set users or groups I see the Access part of the screen open then close before I can set permissions. I just started with this today, so I figure I am doing something wrong. Everyone can access the files now, but I want to control who can, how do I do this?
View 2 Replies
View Related
Jan 10, 2012
I have 2 controllers as below one with 6.0 version and other with 5.2 version AIR-WLC4404-100-K9 6.0.202.0 AIR-WLC4402-12-K9 5.2.178.0 GUEST..Control path between controller flaps.All mobility anchors on wlan index 7 are down.All mobility anchors on wlan index 3 are down.Control path to mobility member x.x.x.x is down.No problem observed when i have software 5.2.178.0 on both the controller.
View 35 Replies
View Related
Apr 23, 2012
I have a situation where I have tenants connecting to my wireless network and paying towards the internet bill. I am able to control this by using MAC filtering, but I have just realised that this only works for wireless clients.
Is there a way to replicate this for the router's Lan ports? Or possibly even just disable Lan access. The router model is a D-link DSL-2750U.
View 2 Replies
View Related
Oct 7, 2011
I am trying to use the Parental Control feature. I can't use Cisco Connect as there currently isn't an update for this router for Mac OSX Lion The firmware version in the support site hasn't been updated for ages, and I am running the latest (v 1.0.04) The Parental control tab, that is supposed to appear in the web browser interface isn't there. It's supposed to be, but doesn't show up.
View 5 Replies
View Related
Feb 7, 2013
Region : Spain
Model : TD-W8968
Hardware Version : V1
Firmware Version :
I have a TD-W8970. In settings "Bandwidth Manager" there is an option to put a value between 1 and 8, but does not specify which is better (1 or 8). What the value to give more priority to a computer to another?
View 1 Replies
View Related
Jan 2, 2012
Just installed the E3200 and use to have a WRT54G. Wanted the N Band.Noticed two major deficiencies.
1) this device does not have Internet Access Policy option and the Parental Control interface is unbelievably poor?There are very few options to work with in terms of time of day to turn on and off blocking access. (Half hour increments only, not 5 minutes increments that I was use to). The "FROM" Field has AM only and the "TO" filed has PM only. This means if you wish a device to have access pass Midnight, you can't, or if you wish to block beginning in the AM, you can't. Furthermore there are no day selections, just School Night and Weekend Night. What if you just want to block school Night. You can't "turn off" weekend. Is there a way to gett full Internet Access firmware into this device.
2) When using Parental Control the devices to restrict access are only displayed by default names. I have 8 devices on the LAN and half of them say Network Device. Any way to identify them by a device name or MAC ID?
View 9 Replies
View Related
