I just purchased a Netgear router and installed it like it said on the directions. I have internet through Time Warner Cable. I did have a crappy phone before I got the router and it made a popping noise on it too, but I got a new phone and it was fine. But after I installed the router the phone makes a popping/clicking noise and it will also disconnect the wi-fi signal and I have to restart the router.
View 4 RepliesAfter popping in the installation CD, the screen says hook everything up, which I do. Then click next, where it says "Searching Networks", then quickly changes to "Connecting to Network", and then it says it "Cannot Find Router.". Err. Check setup, etc.If I hook up directly to new router VIA internet cable. Also, this is strange: When I just open up a web browser and try to log into the router 192.168.1.1, using no user name, administration as the password, it won't let me in to the router. Even after I have reset the router with a pen.
View 1 Replies View Relatedcode keeps popping out 80023121
View 1 Replies View Relatedafter doing one of those sites were if you do this and that you get free stuff, this site keeps popping up ever 3 min, i ran 3 scans on my computer, but even after restarting and shutting down, it keeps poping up. what should i do?
View 1 Replies View RelatedI sometimes am forced to use my computer at work to set-up wireless networks for employees who move into temporary apartments. Now every time I am at my home, my computer, ipad, and iphone keep redirecting to comcast home activation page. The problem is the home activation page that comes up is for one of the apartments I set-up for my employer. It seems to be stuck on the final steps of this other persons comcast set-up and I cant get it to go away. I have a Linksys router with a secure network. It shows I am connected to my network, but when I try to get on-line it send me right back to Comcast activation page for someone elses account. Countless calls to Comcast have gotten me know where. Since the final steps of the comcast activation involve downloading desk top software, and the ipad will not let you download desktop software even into dropbox. It has made my ipad useless when I'm at home.
View 2 Replies View RelatedWhat size fans these are and/or had experience replacing them with something quieter?
View 15 Replies View RelatedEvery 30 minutes we get a constant beeping noise from our router that lasts about a minute.
View 2 Replies View RelatedI installed a wireless adapter on my pc and since then when I play a game online or watch something online there will be times when the sound will be weird and noisy for a slight second along with the slowed visual. Also I noticed that it awakes the wireless printer from sleep mode. Could it the wireless adapter be interfering with the wireless printer? I tried to adjust wireless antenna but it didn't do anything.
View 2 Replies View RelatedI've bought a new Cisco 886VA and want to set the noise-margin value. With my old 876 I had to set "service internal" and then I was able to configure the value unter ATM inter config.
But with the new 886VA I can't find a way to configure it.
The WAG120N makes a cracking noise on the conventional telephone.
View 1 Replies View RelatedIn official information for SG300-28p noise level is 40.6 dB, but in fact its too noisy. Is it possible to change speed of fans? I use only 8 PoE ports.
View 1 Replies View RelatedI have an application, a solar power plant, where communication cables (Cat.6 UTP) are run close to power cables. We've had a lot of failures in the past due to multiple reasons, electrical noise, surge, etc so we decided to change to Cat.6 SFTP. The problem is that now , even with proper termination of the shielding at either one or both ends, the noise is so bad that packet loss is above 90%.
View 8 Replies View RelatedI have just replaced my 54Mbps Wireless-G router (Sky Broadband/Netgear - black, looks like a SkyHD box) with a 300Mbps Wireless-N TP-Link TD-W8960N router, I have also upgraded the the standard 3dBi antennas with a pair of TP-Link ANT2408CL 8dBi high-gain anetnnas.
However when using various WiFi analysis apps I'm getting a signal strength averaging -35dBm and noise of -96dBm when in the same room as the router. But the main bit confusing me is that this is in ALL configurations - with my old Wireless-G router, with the new Wireless-N w/ 3dBi antennas, and with the new Wireless-N w/ 8dBi antennas.
Am I misunderstanding the signal/noise thing or is this Wireless-N router not giving me a better signal at all? I plan on installing an identical setup in a property with patchy Wireless-G coverage next week and I was hoping this exact kit would be the solution.I have tested with two laptops and I am getting 130Mbps link with both, but I understand this is typical of laptop hardware. I don't have any devices with a certified 300Mbps card installed to test with.
Comparing my brand new linksys x3000 (Firmware Version:v1.0.03) with my old zyxel p660hw I see that the linksys is running a downstream noise margin of 8.2dB while the old zyxel is running a downstream noise margin of 15dB. Needless to say, I am very disappointed. why the linksys value should be so much lower?
View 5 Replies View RelatedI have a Cisco AP1142 Standalone AP at two of my locations. However both of these are being rendered useless every night and require a reeboot to correct the issue, because of the high level of noise and vibrations coming from the extremly loud bands that play there, Someone sugested an enclosure stuffed with insulation but Im afriad of overheating the AP.
View 2 Replies View RelatedAre there any manuals on how to open the srw224g4p switch? I can't find anything the switch is making a lot of noise - sound like the fan.
View 2 Replies View RelatedSo this problem seemed to come out of nowhere, I have no idea why it started. Basically, when I use my internet, eg: opening link, loading video or downloading randomly my speakers make a grinding noise and until the noise stops (can be 1-10 seconds) my internet drops (the internet icon on the bottom right shows it is still connected but nothing loads until the noise stops. Even then, the noise can drop in and out like 10 times in a minute and is constantly messing up the internet.
my speakers are Logitech (doubt that makes much difference as I doubt the problem is linked to them and my LAN card is some Ralink thing, nothing special. Here is a low volume recording of the noise, turn up your speakers to hear it well.
This has been driving me absolutely crazy but I am glad to have found the source of it. Over the past 4-5 weeks ever since i built my new computer, my computer has always had this wierd high pitch noise. I dont know if its coil whine or not, but the sound signature is def not the same as the coil whine that comes from my 7970 card. It sounds more digital.
What could be the cause of this? And what would the remedy be? My ethernet cable is approx 60 ft so it will be a pain in the ass to replace. Or buy another NIC?
edit: forgot to mention....the noise is constant. Not intermittent with usage. No amount of load or idle on the network changes the noise.
I have a simple question and i am new to wireless networking.. I recently bought a wireless router to share my internet connection with my mobile phone ( Sony Ericsson Neo V).. My PC doesn't has a Wifi adapter so I have connected router to pc via a network cable.. Now I want to send my files to mobile phone and can i do that through my router? or should i buy a wifi adapter to pc and directly connect to phone?
View 3 Replies View RelatedI had my phone companys old westtell router that they sent when our Town first went wireless back in 05-06 this past nov. I contacted the phoneCompany about having to reset the westell often. They were shockedI still had the old router and said i needed the new one and promply sentThis comtrend they supply and ever since i have this new comtrend whichThey even switced out once the below problem has beenoccurringOn a regular basisPhone company has come twice first time moved phone base awayFrom router seemed to work for awhile. Then it started again 9 weeksLater this time said the phones must be the same gigahertz as the routerAand to plug in an old style phone not a wireless handheld. Nothing they
View 11 Replies View RelatedI have no problems when the computer is connected to a router. That's how I'm posting here now. But my router is old and has no QOS. So the sound quality is choppy when I connect the phone to the router. So I tried connecting the phone directly to the cable modem, with the computer using the phone's router for internet. The phone's sound quality is great that way. But then the computer won't connect to the internet.When I hover over the network icon in the systray, it says "Local Area Connection 4 is now connected. Speed: 1.0 Gbps" The phone's router is a gigabit connection. So I think that tells me that the computer is seeing the phone/router and the cables are okay.I just tried to Repair through the network icon. It fails because it can't renew. I checked Window's Event Viewer to see what kind of error that might have created. This is the error:[CODE]
View 16 Replies View Relatedthe internet is so poor I usually lose the signal, since it has to go through walls and a bunch of trees. My question is can I use the phone jacks in the wall to set up a second router or something to increase it. Or what is the best way to increase the power and strength. What do I need and how do I do it. My fathers router is under verizon vios. I plan on getting and xbox 360 with live capability and need good internet for that
View 2 Replies View RelatedI have a router that i want to connect to my direct tv box. The router only has Ethernet cables on the back and no room for a phone line. how can I connect the phone line to the router?
View 1 Replies View Relatedi have desk top computer hooked up wieless can i use router to povide to cell service and if so how
View 1 Replies View RelatedI have a VOIP WiFi phone (MIC505W) I have configure it according to the user manual.I get access to WiFi, but when I dial a number I get busy signal with the message "disconnet".
View 3 Replies View RelatedThe router is a N Wireless Router. When I try to connect to my router through my phone the SSID appears as belkin.2lc and it won't connect but says authorizing then disconnected. The weird thing is that my laptop and all my roommates laptops and my Xbox can all see the routers real SSID and connect.just fine. I've tried restarting the router and my phone. I've also checked my router settings and made sure their is no MAC address enabled.
View 16 Replies View RelatedHAVE AN ETHERNET SOCKET FOR MY INTERNET BUT WOULD LIKE TO BE WIRELESS MY ROUTER ONLY HAS AN IN PORT FOR PHONE ?
View 1 Replies View RelatedI have a couple of Droid Incredibles, and when I use them connected to my Wi-Fi (even tho I have unlimited data, the cell signal strength is not that high in my home -- I'd rather use the Wi-Fi) they'll run for 10-15 minutes, then hit a brick wall. Internet traffic stops, for all devices conected. ROuter has to be re-booted.url...but I also read some where in this forum that simply disabling AES would work.
View 2 Replies View RelatedSince I am new to VOIP and am getting confused with the responses online on how to connect to a commercial phone system I thought I would ask here. I have a small voice router (1751) running CME with 2 Cisco 7940 phones. I would like to hook it up to a commercial line, but not sure how to. What specific card will I need for my voice router to connect it to the outside world (FXO right)? I see where they talk about hooking it up directly to the LAN line, another using a commercial phone system, and then the others using a PBX,ect... So confused to say the least. I assume I need an FXO port to connect to the POTS, but not sure if there is anything else I’m missing in the setup...
View 4 Replies View Relatedi bought a Linksys E2000 router. When i went to set it up, i noticed that the old router has a phone line connected to it. When i looked at my E2000, I noticed that it didn't have a phone port in it (Rj11). Not sure what to do. Would it be possible to buy a Rj11 to Rj45 converter and just use that to connect the phone line to my router?
View 1 Replies View RelatedI've got a Livebox router/modem that provides an ethernet connection for our desktop and wifi connections for our smartphones (all-in-one kind of thing) in a SOHO environment. what i'd like to do is access one from the other, that is move files between a smartphone and the desktop without additional wiring or hardware.
View 1 Replies View RelatedRecently it has been really slow (less than 300kb/s) and I am tired of it. I want to use wired again but the modem and router are in my basement. Running an Ethernet cable from the router to my room is a last resort. I currently have Cox Internet, Telephone, and Cable. I do have a cable supplying internet to my room, so that is not my concern. How can I move my modem and router without losing phone service? Can it be any phone cable or does it have to be one connected to a special outlet as the modem currently is?
View 4 Replies View RelatedI have a Belkin Surf N300 wireless Modem-Router, but cannot get it to connect to my Android phone. I can connect it to my Nexus tablet, to my desk-top and my lap-top, so I know there is nothing wrong with the router itself. Every time I try to connect the phone, it locates the network, scans, authenticates, but then says "Disabled" and the message: "Secured with WPA/WPA2 PSK" with "locked network" symbol. What does this mean? This is on the label that came with the router: "Security Type WPA/WPA2" but I don't know what to do in order to remove the lock. The phone is a Vodafone Smart Chat and I bought it specifically to be able to connect to Wi-Fi networks.
View 1 Replies View Related