Protocols :: How To Identify Timed-out Route In A Trace
Jul 19, 2012
Have win7 system, cisco WIRED 1720 router, ~1.5mb frame relay via C&WPanama, nortons antivirus installed. IP config dump is at the bottom, but in this event, I don't think my problem is local.An important work-related chat quit working today, and I have narrowed down the issue to not being able to connect to the provider website from my current location. (I can connect via US proxy, but cannot run the java applet via the proxy, it seems it is still trying to go from here to there).
The site I am trying to reach is host7.parachat.com, IP 64.13.158.24
I can load this page (just a landing page comment) as well as their main pages via us proxy, but time out trying to load directly. Fiddler returns a 502 error, socket connection failed.
have tested on 3 machines (all on same router), then on a laptop which hadn't been booted or updated in over a year (also on same router). Trying to find a free wireless network to test with the laptop, but that hasn't been found yet.
[code]....
View 3 Replies
ADVERTISEMENT
Jun 24, 2011
I've enabled antispoof on all interfaces on asa 5510.If you start a traceroute to a network on the default route, everything works, since replies comes to an interface with route 0.0.0.0/0 defined.If you start a tracer route to a network that is NOT on the default route (let's assume coporate MPLS), you only get response from first carrier router, the other are discarded because of anti spoof violation.
I have ICMP inspection and icmp-error inspection enabled.
View 1 Replies
View Related
Dec 29, 2011
I want to know the return path between my IP and a server. I know that trace route gets some information about the hops from my IP to a server (for example www.google.com) but this info is about the forward path. But I want to know what is the path from the server to my PC, what is the reverse path (return path)? What are the middle hops? In other word, I want to know where is the forward and reverse path when I ping a server? I can find the forward path using trace route, but what about the return path?
View 7 Replies
View Related
May 7, 2012
I am trying to track down a device that's blocking a certain port I know there are programs out there than will do a trace-route that's on TCP but is there any programs that allow you to specify a port?
View 6 Replies
View Related
Oct 15, 2012
We have a ASA 5505 and a 5510, that we are using site to site.I need to traceroute from the 5505-5510.. From the outside interfaces.. Don't want to do this through the site-to-site.I have temporarily added a few acl on the outside interfaces.when i traceroute it only goes one hop.. Maybe thats the way it suppose to be? I need to know all the hops between the outside interfaces on the 5505 to the outside interface on the 5510.
View 12 Replies
View Related
Mar 24, 2013
when i make a trace route on an ASR 1001 router to 172.23.30.7 I get the following output:
VRF info: (vrf in name/id, vrf out name/id)
1 192.168.99.192 0 msec
192.168.99.191 1 msec
192.168.99.192 0 msec
2 172.23.30.243 1 msec 1 msec 1 msec
3 172.23.30.7 1 msec 1 msec 1 msec
Is there a loop between 192.168.99.191 and .192 (this are two routers with hsrp .190) or is this normal behavior when using trace route on an asr 1001?
View 2 Replies
View Related
Jun 10, 2013
I changed from a Linksys E4200 to a 5505 and when I use trace route, it doesn't return a DNS name for each hop. I can see the hops shown as asterisks. Do I have to add something to inspect for this to work?
View 1 Replies
View Related
Jan 21, 2013
I have an E4200 and have added it to my network with a new static IP and DHCP and firewalls off.It runs off my cable modem and router (Virgin Media Superhub) that has DHCP.When I tell it to do a firmware update, traceroute or ping it fails, just wont do any of them.
View 9 Replies
View Related
Jun 6, 2011
I have problem with icmp traceroute configuration. When I enabling icmp error inspection in global policy, my traceroute results through ASA 8.2.4 looks like this: My traceroute [v0.75]
icmp inspection and ttl decrement on ASA is enabled. Also I configured ACL on outside interface to permit ICMP completely.
View 14 Replies
View Related
Mar 21, 2011
I am trying to finish a project and i now have a very un-natural networking question, but i figure that this is the correct place to ask it.
Tools:
Routing Device = Router.
Test App = Creates and Sends Packets through my machine's NIC via NDIS Driver.
WAN = Internet.
VPN = Connected over WAN.
I am trying to route/forward/nat promiscuous packets "TO" the Internet to finish my project. The packets are not addressed to my routing device, but it must take them and forward them on to a VPN connected over the WAN. The packets are actually created by my NDIS test app. This means that the packets will be generated on my local LAN, but will not contain the MAC or IP of the routing device. So they will only enter my routing device while it is running in a promiscuous mode.. how would you try to route promiscuous packets out to the internet?
View 6 Replies
View Related
Apr 21, 2012
I recently purchased a RV082 in hopes of increasing the thruput of my network with multiple users. I initally did have issues with the router locking up and stop functioning every so often, but it seems I have fixed that (so far as I can tell). The main problem I'm having now is the "Load-Balancing" functionality. Because of certain websites I would like to route all HTTP traffic through WAN 1. I've tried doing this by using (System Management > Bandwidth Management > Type: Priority) and making all HTTP traffic a high priority on WAN1 but HTTP traffic still goes even amongst both of them. I've even tried using the Firewall to block all HTTP traffic on WAN 2 and that failed be too. Even with my superior interface know-how, I'm getting no-where with this task.
Also, as less important ambition. I would like to separate a port forward on port 80 so that I may host two website via my two WANs. I've read somewhere that using the firewall instead of the Forwarding function would work, but I was unable to accomplish that task.
View 8 Replies
View Related
Aug 20, 2011
why the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies
View Related
Apr 30, 2011
how to trace ip adress during chat
View 2 Replies
View Related
Jun 17, 2011
how to trace IP when proxy is used.someone I know is playing a prank that might cause my marriage to break.That person uses proxy with many different IP and also a loopback. does anyone know how to trace the IP even with the above is used.
View 2 Replies
View Related
Jun 24, 2012
Is there any way to trace a device using Ip address?
View 2 Replies
View Related
Mar 31, 2012
track my laptop
View 2 Replies
View Related
Jun 13, 2011
If my computer was stolen could I locate it using the unique mac address? And is this why burgular didn't take two laptops when they burguled us last night
View 1 Replies
View Related
Mar 3, 2012
We use microsoft exchange for outlook. I want to know which ports are being used by our exchange server to receive and send emails. Is it possible to check that?
View 1 Replies
View Related
Jun 23, 2012
i think someone took my laptop i can not know unless i can track it i have all the info on the laptop i still hae the box but i desperatly need to know where, basically someone has it and is telling me it is mine but will not let me see it.
View 1 Replies
View Related
Dec 14, 2012
our laptop missing at banaganapalli kurnool dist andhra pradesh
View 1 Replies
View Related
Feb 1, 2011
Basically my friend has a game server with a particular IP. But lately I don't seem to be able to even 'see' that server. Pinging the IP gets a timeout. I did a tracert on the IP and from the first hop onwards it gives me 3 stars followed by a 'Request Timed Out' until the 30'th hop.
View 15 Replies
View Related
Feb 22, 2012
How to trace firewall and load balancers placed in data center.
View 6 Replies
View Related
Sep 20, 2012
Our ESP traffic is passing through multiple nodes and we can not establish the tunnel. and I want to know which node blocked ESP traffic. How to trace which node blocked ESP traffic ?
View 5 Replies
View Related
May 27, 2011
Within the past week,my facebook and yahoo mail accounts have been invaded and deleted. I know it is an iphone. I found several ip addresses.
View 1 Replies
View Related
Mar 8, 2011
i was looking to trace back a website from 2 months ago but not sure how to get into the history of the laptop,
View 1 Replies
View Related
Nov 28, 2011
I am receiving trace back logs in the 881G with 3G module. And after reload, the router is going to Initial Config. mode. What the latest IOS is?
Current IOS I am using is c880data-universalk9-mz.151-1.T3.bin. Any better IOS for complete efficient use of the PCEX-HSPA-G Module ?
View 5 Replies
View Related
Jan 9, 2013
I first noticed it in games, and decided to ping my router in CMD. I see the occasional "request timed out", and not sure how to fix it.My other computers connected to the network are working fine, and I've tried USB Wireless adapters in my laptop which work fine, which implies the problem lies with the inbuilt adapter itself.I've tried reformatting, and updating drivers, but to no avail.I thought maybe the adapter might just be faulty, but then I decided to test it on Linux. I pinged the router in the terminal and... it seemed to work fine. I thought maybe some background process in Windows might be doing something to cause the problem, so I started in safe mode (with networking)... still the problem remained.
View 5 Replies
View Related
Dec 31, 2012
How i find my lost nokia c2 03 with imei no.online without any pay..
View 1 Replies
View Related
Sep 7, 2011
I have a two ASA 5520's and I want to be able to see or monitor the traffic between each tunnel. I am using external addresses but for the sake of this question I will use the following: 1.1.1.1 to 2.2.2.2 . How can I montior the traffic?
View 3 Replies
View Related
Dec 16, 2012
Our Firewall is just new. ASA5525X
Today, during a packet_trace to debug a routing problem, the active ASA
- thsasaprd02 - crashed suddenly.
I was able to copy-paste the console - including the command that triggered it - After the reboot I ran the command again, on the same ASA - after doing a manual failover - the command succeeded normally.
View 2 Replies
View Related
Aug 26, 2012
We've got Workgroup LAN at our office and the Server is configured by the OS “Windows Server 2008 R2”. Most of the users use OS Windows XP-Service Pack-2. Now, I want to see the Internet surfing status/activities done by any particular user/users at any time from the Server. You know that, some people enter into restricted sites which impose severe negative impact on the network. If I could trace from the Server any user of doing this, I shall block his Internet connection from the Server.
View 1 Replies
View Related
Jan 4, 2012
My Sony Vaio was stolen and I dont have any tracking software on it. I was told it can be traced using the serial number this is not going to work as the serial number is not digital is this correct? If so is there any inbuilt device or software ect: that comes installed when you purchase the laptop? I am desperate to find my laptop as it has personal information stored on it of my partner who recently passed away and non of this is replaceable. I would prefer to find it without using the authorities as i know who this person is i just dont know where this person has stored the laptop. It would be best for the authorities not to be involved for my safety.
View 5 Replies
View Related
Jul 9, 2011
My laptop "hp pavillion dm4-1065dx" hass been stolen and i have not installed any theft or tracking related softwares. Kindly tell me how to work dis out and find my laptop.
View 1 Replies
View Related
