Protocols :: New Wireless Router Netgear?
Nov 27, 2011I have been in communication with Mediacom and Netgear, but to no avail. I need setting up a wireless router from hardwire to configurations,
View 2 RepliesI have been in communication with Mediacom and Netgear, but to no avail. I need setting up a wireless router from hardwire to configurations,
View 2 RepliesI am trying to instal my Netgear router. It is asking for the Preferred DNS name and the alternate DNS name? I got the IP address and the other required fields but I'm not sure about eh DNS thing?
View 2 Replies View RelatedAm running a netgear wgr614v6 as my main router and a buffalo air station as a bridge to the net gear so I have Internet in my living room without wires
I have cable Internet and I have had to constantly reset router to get it o work. Even when on main computer a web page will fail to load two three times abnd then will work. I am at my wits end and don't want to buy a new router for fear of having to set up the bridge again and make an error when doing so.
I have tried opening the ports on xboxs website. tried dmz. tried both. i have a basic understanding of changing your xboxs ip.i have disabled windows firewalls and got rid of macafee altogether.
View 10 Replies View Relatedwhy the WAN protocols like Frame-relay, HDLC and PPP are called Layer2 protocols?What is the address scheme they use?
View 5 Replies View Relatedi have decided to take on the 3G strategy by using some powerful equipment to boost my 3G and obtain internet access, (accessible no problem)however in my "kit" includes a huwaii mifi device which i will be using along with a crc9 to connect to my military spec booster to pick up 3G and get better internet speeds than anyone in the area.problem i have is with the mifi router, it has small wireless range.i have a strong transmitter to use with my standard router, now what i want to do is bridge the mifi with a a/g/n router and all devices connect to the router that will provide better coverage due to the 3g kit and mifi will be very close together in the roof space and away from the other devices on ground floor.can i bridge mifi with a wireless router so connections will run through the lets say, belkin router.
View 1 Replies View RelatedI need to open the 443 port on my rangemax wireless router to enable credit card processing
View 1 Replies View RelatedI bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.
View 2 Replies View RelatedMy D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524
View 1 Replies View RelatedI have a Motorola Surfboard cable modem with a Comcast account that is supposed to get "up to 15 mps". My desktop works gloriously, but my laptops and everything else hooked up to the net through my Media link Wireless N Router either run incredibly slow, or get kicked off completely.I've already had the router replaced one.
View 19 Replies View RelatedHow do you install a second wireless router to increase coverage in another area of house?
View 1 Replies View RelatedI have a CANYON Wireless N Router CNP-WF514N1A. It was working properly, but I changed its deafult password to my own . (192.168.0.1 -> wireless security -> new pass -> okay -> reboot computer ). After I restarted the computer, the router stopped working. The lights on it are fine, and if I plug the net cable into the computer I have internet too. The problem is, if I plug the cable into the router, I don't have internet. And I can't open 192.168.0.1 either.
View 1 Replies View RelatedI have done all the resets, factory resets, hard resets, and any other names. When I attempt to enter any sort of IP addresses,default Belkins and ones I see when viewing ipconfig, all it does is perform a Google Search with the numbers.Again, turning on wireless on my laptop and phone fail to find my router, which used to just be called "Belkin".Here is all the info that I believe you need:
IP- Comcast
Modem-Cisco DPC3008
Router - Belkin F5d7230-4 V1444 (althought a little old, have never had major issues untill a couple days ago)
Windows IP Configuration
Host Name . . . . . . . . . . . . : JBerman-Win7
Primary Dns Suffix . . . . . . . : mmreibc.prv
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
I have a Compaq mini CQ10-100 Netbook, and I am trying to Make a Wireless internet connection through a D-link router. My ISP is Cox Cable. The Netbook is connected to my wireless network, but will not connect to the internet. It keeps asking me to transfer information, via thumb drive, from a wireless access point, but my router is my wireless connector and it doesn't have a USB port to plug in a thumb drive. How do I get this netbook hooked up to the internet?
View 1 Replies View RelatedI have a Dell Inspiron 1501 with updated windows XP. Today I purchased a netgear wireless router N150 and a roku player. I inserted set-up CD after I hooked up cables to computer, modem and router. The message told me that there was no ethernet adapter and spelled the end to my installation.
View 1 Replies View RelatedMy router stopped working today after I tried updating its firmware. I have tried to hard reset the router but it just won't broadcast a signal. Is there any hardware problems related to this or are there any other ways to reset it?
View 6 Replies View RelatedMy netgear is on but its not broadcasting i even called tech support but their idea did not work which was to restart the modem i have tried everything that i know to make it work but nothing has made it worked !!! the wifi always worked fine but just one day stopped
View 1 Replies View RelatedHow do I set up a security key for my wireless netgear router?
View 2 Replies View RelatedI just recently purchased a Net Gear wireless router, I am unable to get on the internet unless I have the ethernet connected to my laptop.
View 1 Replies View Relatedmy wireless connection (netgear 79) fluctuates often from 5 bar signal dropping to 1 - computer repairman suggested programming an extender into router...my computer is only 8 ft. from router in another room...would a second router do better and/or easier to implement
View 1 Replies View RelatedA friend gave me a Netgear 3300 wireless router. No start up disk, just the router. I get internet through Comcast. My main computer is an iMac. I want a couple of MacBooks, an iPad2, and a Dell laptop to connect to the wireless network. First, will the 3300 work with these devices? Second, what do I need to do to set up the router? how do I connect the devices to the router?
View 1 Replies View Relatedhow long does a netgear router last
View 2 Replies View RelatedI lost the cd to set up my n600 netgear wireless router. How can i set up my router without the cd?
View 1 Replies View Relatedi moved houses and am trying to reconfigure my netgear wireless router, instead of using my apple hotpot?
View 1 Replies View RelatedI need the capability to log into the 3g/4g modem and change the Wan IP address. Doe anyone know of a 3g/4g modem that allows you to do that. My other option would be to disable the wireless radio on the 3g/4g router and connect my Linksys Wireless router that I know I can log in and change the WAN Ip. It looks like to me that this model below would allow me to do that?MBR1516 Will turning off wireless radio on the 3g/4g router completely turn off all routing or could there be a conflict with my Linksys wireless router?
View 6 Replies View RelatedHow do I confirm what is my router's IP address?
View 2 Replies View RelatedIt says unidentified connection when we connect to the network, and when we go to the "connect to" and connect to the network i setup it will sometimes say "with limited access"!?I have used the diagnose tools on his computer. I have restarted his computer, the modem and the router. We have disconnected and reconnected several times to the network for the new router but nothing works, the only way he can get on the internet with this router is if plugged directly to it with an ethernet cable. We have put the old router back up but I really don't want to keep using it, it is so old and I don't remember the password for it.
View 2 Replies View RelatedSee attached diagram, which shows me using the tp-link router to protect my internal network from the guest network for internal security.Should I put the tp-link router into a DMZ on the first main Orcon router to be able to make remote access form the web into my network? I have an IP camera etc that I need to access from the WWW. If I do this does this have any security implications; both for my network or the guestsMy reasoning is not; as the TP-Link still acts as my firewall and the specific address of the TP-Link doesn't affect the guest, but I thought I'd check with the Pros!?
View 1 Replies View RelatedMy NetGear router stopped connecting to the internet. The internet light, which is usually orange, is now yellow and flashing. I tried rebooting everything and now, when it connects it says "local access" so I can't get on the net
View 3 Replies View RelatedChild at college having significant connections issues with Sony VAIO VPECB trying to connect to Netgear N300 wireless router. Upped the bandwidth - no impact. Other MACs in the house have no issue.
View 1 Replies View Relatedhow do i setup a password for a netgear wireless router?
View 2 Replies View RelatedI recently replaced a Linksys wireless router with a Netgear wireless router(provided by Comcast) to the modem in my house. I used my HP Pavilion as the computer to run the setup disk and the wireless wizard to link the new router to the modem. I unplugged my HP from the router and proceeded to setup my computer on the wireless network.
View 14 Replies View RelatedMy 7 month old Netgear wireless router suddenly stopped working
The router's power light will not remain on after powering it up. The only lights that remain on after power-up are the (4) "LAN Port" lights (solid green) and the "Internet" light (solid amber).
The owner's manual states that it's a hardware problem if the power light does not remain on and to call tech support. The tech I spoke too said it's a settings issue that they deal with everyday and not a hardware problem.
One of the things I've tried was using a paper clip to reset the router to it's factory settings. It didn't change anything though. Re-running the setup CD didn't yield any results either. It just stopped in the middle because it said there was no ethernet cable connecting the laptop to the router, even though there was.
By the way... My ISP is Century Link and I use an Actiontec DSL Modem.
Not sure how to modify the router's settings if the network is down.