RJ11 - Modernize Combo Electric And 4 Prong Telco Jack?
Feb 21, 2011
I would like to be able to modernize these outlets with a new RJ11 jack for telephone and replace the electric outlets with fresh ones. Problem is, no one can lead me to where I can find new wall plates for this combo setup style. Someone has told me this is out of code for many years now and there is no clear cut path to modernizing it besides just moving the telco jack/box out of the electric gang box and into its own separate box to the side.
Upgrading such "messes" to standard modular RJ11 plugs, and finding wallplates for it?
View 2 Replies
ADVERTISEMENT
Dec 18, 2011
I received Centurylink DSL modem with hardware but my phone jack wiring was ripped out of wall,no wiring intact.what kind of jack and how to wire them to the jack. The wiring came thru wall are new kind with 4 pairs and have stripes on them.
View 1 Replies
View Related
Aug 21, 2011
I recently installed a tp-link router everthing works ok. The problem is when I turn off my pc and disconnect it and all attached devices (modem, router ect) from the electric supply. When I turn it back on I have no internet connection until I reboot the pc a second time.This problem only occurs when I disconnect the router from the electric supply. If I just shut down without disconnecting then I can turn it on and it connects to the internet without any problem.
View 5 Replies
View Related
Oct 26, 2012
we are bringing up new ckt and nexus 7000's interface isn't coming up once telco gave a loop. and wee following msg when I do "sh int eth1/1".
(UDLD Tx Rx loop, port: error)
what does "(UDLD Tx Rx loop, port: error)" it mean?before loop. interface was showing as "Link not Connected".
View 2 Replies
View Related
Apr 21, 2013
My Dell Lattitude E6420 WIFI adapter disables anytime I plug my laptop into the adapter and electric wall outlet. It has the Intel Centrino Advanced-N 6205 adapter. I've downloaded the latest drivers, updated the power settings on the adapter etc. it's becoming a real problem as I often have to be mobile moving from office to office and up having to stay on battery power until it almost dies to avoid having to go into Device Manager each time I plug back into to re-Enable my adapter.
View 1 Replies
View Related
Jul 28, 2011
how do i make rj11 to cable
View 1 Replies
View Related
Jun 9, 2013
We've have a client who had a ordered 2 units of 2901 router to have site to site connectivity. User has bought a leased line of 256kbps from service provider in between two sites, but the issue is the service provider has layed a rj11 cable and there is no rj11 interface on 2901 router it only has two rj45.
View 5 Replies
View Related
Apr 25, 2011
I want to connect 2 desktop computers by wire to my broadband. The inlet is 20 metres downstairs. Should i use RJ11 to reach the Router upstairs, then connect with 5 metres RJ45, OR run two RJ45 cables 25 metres with Router near socket downstairs.? Would there be any degredation in either cable.?
View 5 Replies
View Related
Aug 9, 2011
I want to connect internet via telephone cable by using rj11 jack from my ethernet switch to another computer it is 150mts away from my office premises.
View 1 Replies
View Related
Aug 26, 2012
Is it possible to use ADSL Wireless router (one with RJ11 WAN in) to connect to cable net? If not is there any which can allow me to connect to cable net in future if in case I change to cable net ISP.
View 2 Replies
View Related
Aug 23, 2011
i want to know the function of 8wire of RJ45 port
View 3 Replies
View Related
Mar 29, 2011
I have a new router with RJ11 input....but from my DSL Modem, the output is Rj45.how can i connect it...
View 1 Replies
View Related
Aug 22, 2011
I'm moving into a new place pretty quick, and my ISP has just introduced those lovely (read: awful) modem/router combos. I want to use my router running DD-WRT however. If I disable all firewalls, etc. and the DHCP server on the built-in router, and then have that all enabled on my DD-WRT router, everything should work, right? That way the combo unit would basically just be acting as a modem.
View 5 Replies
View Related
Nov 22, 2011
I am looking to purchase an ADSL wireless modem router combo which will be mainly used for net browsing, online gaming (ps3) and skype.It has been suggested by the IT tech we use that I a get dual band n wireless gigabit modem/router but my limited knowledge and the confusion created by reading multiple contracting reviews of products is sending me a bit loopy.
View 2 Replies
View Related
Feb 22, 2013
What the best/fastest cable modem/router device is? I currently have a motorola surfboard sbg6580. It works good, but it interferes with my direct tv so I can't use it and need to find another....
View 3 Replies
View Related
Jan 4, 2011
I just got Comcast ISP and used my own Modem. It's a Webstar DPC2100 R2 Modem and I can connect just fine from Modem to my pc. However, when I add my Netgear WGR614 v6 router into the mix, I get no connection.
[code]...
View 7 Replies
View Related
Dec 5, 2011
So i'm living in an apartment and brought up my pc desktop from home, issue is that the internet cord was not long enough to connect from my room to the modem outsideTheres apparently an internet jack in my room and i have no idea how to set it up to respond to the modem thats currently placed in the living room.
View 1 Replies
View Related
Oct 21, 2012
I switched to xfinity and I really don't feel like renting their gateway for $7 dollars a month. Gateways are crap anyways. So do any of you know of a good router and modem that can be paired up to work well with xfinity and has good speed?
View 1 Replies
View Related
Dec 14, 2011
SO I am not a computer wiz... but I have this outlet in my upstairs wall which has a phone and Cat5e Jack. I would like to set up my wireless router up there but where does the modem go? there is no jack for the cable.
View 1 Replies
View Related
Sep 11, 2011
Is it possible to buy an adapter that, when plugged into the cable jack. will give me internet? My wireless network is painfully slow since it's based in the basement yet I work in the attic. (DL speeds tap out at around 250kbps)I dont have an ethernet only the cable jack.
View 1 Replies
View Related
Jan 4, 2011
I'm wiring up the house with CAT6 (I've never done this before). Someone told me to use 'T568B' termination. Every configuration I see on net looks different, and I'm getting confused.
The jacks have double colour coding for each wire as pictured here:I take it 'A' is for T568A, and 'B' is for T568B?So this is how I should arrange the wires for T568B:
View 3 Replies
View Related
Feb 14, 2013
I recently went to a higher speed ADSL which claimed to be 16Mpbs.. It is with Acanac and when i first tested with speed net it came in over 14Mbps. I was using a netgear wireless g router (old) with the 4200 speedstream modem and got these results which I found acceptable. Now using netgear n router modem combo DGN-2000 and my readings are just over 12 Mbps. I tried reverting and still got the lower speeds. I tried isolating one computer hard wired still got the lower 12Mbps.It hasnt really affected my download speeds as far as I can tell but I did find it a little puzzling.
View 2 Replies
View Related
Jul 19, 2012
I have a Linksys E2500 and I'm trying to connect it to my ISP provided router (Actiontec V1000H) because I wanted better range and consistent connectivity for my 6+ wireless devices.My problem is that, to make this work, I connected an Ethernet cable from the E2500's yellow internet port to one of my V1000H's LAN ports. This, however, did not give me access to the internet even though the network for my E2500 was available in the network list and selected as the default network. I then had to go the the advanced settings of the E2500, and changed the router IP address from 192.168.1.1 to 192.168.2.2. This granted me internet access.However, everyone i've talked to including coworkers and experts at dslreports said that, because of what I've done I've set up a double NAT with 2 potentially conflicting IP addresses, and down the road weird issues will arise because of it. They also suggested I connect the E2500 to a dedicated modem to avoid this problem. However, the dedicated modem I was sent was faulty and did not allow internet access even through the ethernet connection. So, until I get a new dedicated modem, I have to use the router/modem combo.What should I do? Should I set up the E2500 as just a wireless access point for my existing router/modem combo? What do I need to edit in the advanced settings?
View 6 Replies
View Related
Sep 5, 2011
I've got an SG300-10P switch and am trying to use it to create a testing environment for a Fiber Test set. What I would like to do is get two hosts, A & B, plugged into ports 1 and 3 on the switch, to talk to each other, but forcing the traffic to be routed through the two Combo ports 9 & 10. Please see the attached diagram.I've attempted to configure two VLAN's, 10 and 20. Vlan 10 is used for traffic between Ports 1 and 9, Vlan 20 is used for traffic between Ports 3 and 10.I don't really care whether the traffic is tagged or untagged as it passes between ports 9 and 10.
I've tried various combinations of tagged/untagged ports, PVID's, etc. As a first test I've bypassed the Fiber Test set and simply created a direct connection between ports 9 and 10. I am unable to get the traffic from Host A to Host B to get routed through ports 9 and 10 (I ping each host from the other and get no response).
View 7 Replies
View Related
Jun 23, 2012
All wires terminate in the basement as a RJ-45 plug, to be plugged into a switch housed in an old circuit breaker box. The first wire went off without a hitch, the jack works, the plug works, all is right with the world. The router for the home is currently plugged into that outlet so as to give the entire network as we build it internet. The second outlet is giving us problems though. I've fished the wire up the wall as before, and the length of wire is shorter than the first run. When I terminate the end upstairs as a jack, then plug in my laptop, it refuses to connect. It says the network cable is unplugged. If I terminate the cable as a plug, then plug it directly into the laptop, suddenly everything works. I have tried so far 3 different jacks, tested continuity on the jacks, and tested continuity on the wire to the jack pins to make sure the terminal block was working and everything came back green
View 9 Replies
View Related
Nov 2, 2012
On my closet's patch panel, there's one ethernet jack that is labeled "IDF5", I was just wondering what it is used for.
View 3 Replies
View Related
Dec 24, 2011
Does magic jack works with dial-up or should I up-grade with high speed internet ?
View 1 Replies
View Related
Jun 19, 2011
I have a D link 655 wireless router and my magic jack calls end after 15 seconds.
View 2 Replies
View Related
Feb 16, 2013
My magic jack phone has stopped working and I cannot make ( or possibly receive) any phone calls
View 2 Replies
View Related
May 21, 2012
I have a phone jack in my computer. i want to connect to the internet on it. I have an arris modem that supports the Internet phone but it has Ethernet port too can i just use the telephone port on the modem to connect to the inet?
View 1 Replies
View Related
May 13, 2011
I'm using a 2wire 2701HG-B wireless router/dsl modem combo. My computer is a Win 7 Ultimate 64bit. The router/modem has been reliable for the last 2 years.. hardly ever needing a reset, reboot, or anything. Then all of a sudden my wifi network didn't show up anymore. I did a reboot, nothing. Kind of weird so I got on the phone with AT&T and they walked me through some simple stuff and they determined it's either the router or my computer. Well I know it's not the computer, I can use the mobile hotspot on my android phone and it gets on just fine.All of the lights on the router are green, AT&T showed that all the tests show the internet connection is working. Since the router is not sending out a wifi signal anymore, I had to plug the ethernet cable in. The system recognizes a connection but says it isn't connected because it is a "public" connection. Additionally, if I go to network connections with the cable plugged in, I can see my DirecTV DVR is showing on the network (because it is connected to the router via ethernet too). So it isn't broadcasting wifi, I can see my DVR over the network in windows, but I can't get the IP renewed.
Here is the ipconfig /all print:
Windows IP Configuration
Host Name . . . . . . . . . . . . : thindery-laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
When I try to do an ipconfig /renew, it says this:Windows IP Configuration An error occurred while renewing interface Local Area Connection : The operation was canceled by the user.An error occurred while releasing interface Loopback Pseudo-Interface 1 : The system cannot find the file specified.The AT&T rep said I may need a new modem and router. It seems weird because it worked fine one night, then the next night all of a sudden it didn't work.
View 5 Replies
View Related
Sep 26, 2011
I'm looking to replace a broken Linksys 8-port router that was connected to a D-Link Wi-Fi unit. I'm not sure what hardware to go with for use in a house ~2000 sq. ft. I'll be using an Xbox (currently hardwired), Wii (wifi equipped), iPad, PC laptop along with a desk top PC (currently hardwired) sometimes simultaneously.
View 2 Replies
View Related
Nov 9, 2011
I have a network closet where all the ethernet ports in each room of the house is routed to so wired routing performance must be good.I also need a good wifi network since we have multiple laptops and tablets we use around the home. I do have 2.4GHz and 5GHz devices so I need the dual, simultaneous wifi operation.The gear I can choose from to do this:
Asus RT-N56U
OR
Cisco RVS4000 + Netgear WNDAP360
The home is a 2-story unit and the networking closet is upstairs near the front of the house. If I go with the Asus RT-N56U, the wifi network will be centered in the network closet. If I go with the Cisco RVS4000 + Netgear WNDAP360, the Cisco router will be in the network closet and the Netgear WNDAP360 will be connected to an ethernet jack closer to the center of the house.
View 8 Replies
View Related
