Servers :: DHCP Superscoping Or Resubnetting
Feb 21, 2012
I have a LAN running on a 10.60.1.* scope and I am running out of IP addresses. My windows server 2003 IP is 10.60.1.3 router is 10.60.1.4, If I create a superscope with 10.60.1.* and 10.60.2.* scopes within it and add an IP address from the 10.60.2.* range to both the servers and routers network configurations would this allow the clients on both scopes to see the network? The router links our office to other offices as well would the new IP range cause all kinds of routing issues?I know with the resubnetting option changing to a 255.255.254.0 from the current 255.255.255.0 would allow the use of 10.60.0.1-10.60.1.254 in a single subnet but I suspect this would cause problems with seeing the other offices unless all routers were reconfigured to recognise our offices new subnet mask.
View 1 Replies
ADVERTISEMENT
Apr 14, 2011
2 dhcp server on the same lan segment not thesame ip add series , how can i prevent to lease ip from another ip series
View 2 Replies
View Related
Mar 23, 2011
I am trying to set up a small domain for my business. I just purchased a Windows 2008 server and would like to use it as my domain controller.Also, I just had a new ATT DSL line put in. It came with a 2Wire modem/4-port router/wireless router device, therefore the modem can handle DHCP. The line has a static IP address as well so that I can eventually use my own exchange server and web server.I have tried 2 different configurations and couldn't get either to work) I tried to put the router into Bridged Mode and use DHCP server on my server using a PPPoe connection to connect to the Internet. I was confused as to what my static IP address and default gateway of my server should be.2) Then I tried to turn DHCP server off on the server and routing back on the modem/router. This didn't work either.What method would you recommend and why? Also I have some additional questions on each method.
Method 1)
* What is the static IP address of the server. Is it in the 192.168.1.x address or the static IP assigned to my account?
* Do I need a second Nic Card And Router to connect to the rest of my network or can I use the router provide
* What would the Static IP addresses of the additional PC be. Do I need more than 1 static IP from AT&T Method 2)
* Will this allow me to use all internal IP addresses on my machines and use port forwarding if I want a specific box to be a web server or exchange server.
View 18 Replies
View Related
Jan 19, 2011
Ethernet adapter Local Area Connection 2; DHCP Enabled: No
View 4 Replies
View Related
Apr 20, 2011
how can i see unauthorized dhcp servers in my network
View 1 Replies
View Related
Jan 11, 2013
I have successfully configured my DHCP server because I can ping it from the clients PC and my clients PC automatically grabs IP from my DHCP. How my clients can have access to internet. Here is my hardware setup: 1. I connect clients PC and one DHCP server in one unmanaged switch2. I have my Bell DSL Modem but not connected yet to one of these machines. I do not know how I can configure it yet to work with my machines.The IP I assigned started at 10.10.200.10 to 10.10.200.90How do I connect the DSL and configure so that it may give everyone access to internet?
View 1 Replies
View Related
Aug 14, 2012
I've done a very crude drawing of the network setup I'm working on. I just need to run an idea past some network guru's to see if I'm right about my idea.
The existing network consists of
Internet
Proxy Server
Several switches scattered around school
PC's
What the school wants to do is setup a side-along wireless network that uses the same physical switches but on a different subnet. The current subnet is 10.172.1.x .
To facilitate this I'm running a 2008r2 running RIP V2 to route internet traffic to 192.168.1.x subnet. I've had the wireless units use a static address and their own dhcp servers on the 192.168.1.x subnet. Wireless devices found their way to the internet fine. But I'd like to control the addresses from a single point of contact, hence the 2nd domain server running 2008r2. There are reasons for using a 2nd server, I've covered this in previous topics. If it's important, lets call it an intellectual exercise and leave it at that.
The question(s) : If I run a DHCP server on the 2nd server serving 192.168.1.x addresses, then any device on the physical network will obtain either an 192. or a 10. address correct ? The wireless devices will only take a 192. address because the wan address is statically assigned to a 192. address ?
The 2nd question : By setting a static routes out of the 2nd nic on the 2nd server, I can control the dhcp server so it will ONLY route dhcp requests to the statically assigned wireless devices ?
View 6 Replies
View Related
Mar 6, 2012
I have Server 2008 R2 DC & One ISA server 2006 enterprise. im facing problem with DHCP unable to give DHCP IP from internal LAN. Its taking IP from External LAN IP i.e. connected to Linksys external Router which has DHCP enabled with different IP class i.e .class B. After shutdown client PC it will take 0.0.0.0 no IP will be assigned & says linited connectivity.
View 4 Replies
View Related
Aug 6, 2011
I have two locations both about 800meters apart, one is my home and the other address is a campsite where i have a linked router network (WDS with routers running ddwrt) where campers can all use the internet and also i have several IP cameras. Obviously both address have different gateways and therefore their own DHCP server. Everything was running perfectly until.I linked both of my address up using a long range antenna and now i am having problems.
Sometimes the two DHCP servers are competing with each other (i need both addresses on the same subnet in order to view my IP cams from home) and sometimes the computers log on to the wrong gateway. Its very annoying because the only way i can resolve it is by turning of the "linking routers" for a minute and then the Computers log onto the correct gateway. This happens to clients both side of the bridge. I have many different clients on both side of the bridge so assigning each computer (via windows) its fixed default gateway and DNS is out of the question as some of the clients are Camper's PC's and mine and my wifes laptops swap between both locations.
Now my query is, how can i block both DCHP servers from going over the bridge? OR can i have them on both separate subnets and still view my IP camera and still access all the routers from each subnet (i need this because sometimes i need to reboot the routers from home)
View 12 Replies
View Related
Dec 27, 2010
I have cisco router C1700. Interface FastEthernet0 is connected to ISP and obtain public IP and DNS via dhcp.On interface FastEthernet1 is connected private network. On router is configured dhcp pool that assigns addresses to private network connected on FastEthernet1. Is there configuration that automatically add the DNS servers from my ISP into the DHCP pool?
View 5 Replies
View Related
Jan 31, 2012
win 2003 dhcp server. when I leave dhcp services OFF i can ping the server fine. once i turn ON dhcp services the connecting drops in and out.. what is going on here?
My users are unable to get a steady connection to the dhcp server.
View 8 Replies
View Related
May 2, 2011
i have the following scenario that i'm requesting you guys verify if it will work.I have a 3550 catalyst switch running EMI and an auotomous 1131AG aironet ap, i have two dhcp pools already setup on the switch one for the LAN and the other for the wireless clients.There are two vlans on both the switch and ap for LAN and wireless clients.I have already setup multiple SSID's to be broadcasted from the AP, is there a way i can bind one SSID to the lan dhcp pool and the other to the wireless clients dhcp pool?
View 1 Replies
View Related
Jul 29, 2011
dhcp server failed while running network diagnostic test for windows xp
View 1 Replies
View Related
Feb 15, 2013
I have a WLC 2106 which is configured and working as follows: [code] how do i get the AP at Site B to use the local server (10.0.28.x) to hand out DHCP leases?
View 3 Replies
View Related
May 1, 2012
I can't seem to find any info on how to configure 2 DHCP server pools on a C3750, to use with 2 user vlans. The purpose is that users in vlan 1 should get an IP address from DHCP server1, and users in vlan 2 should get an IP address from DHCP server2. Both DHCP servers are configured in a stack of C3750 switches, which acts a a L2 switch.
View 2 Replies
View Related
Jan 19, 2013
I'm using a 2601X router connecting to a broadband connections. The following NAT connections is working but I need to do NAT exemptions to set up my VPN appliance on the DMZ. I see a lot of documentation on how to use a pool of public addresses to do that, but I only have the one dhcp address from my isp.
!
boot system flash:c2600-adventerprisek9-mz.124-25d.bin
!
!
!
interface FastEthernet0/0
[code]....
View 5 Replies
View Related
Apr 1, 2012
Do you have the ability to setup DHCP servers on this layer 3 switch? I know I can with my old 3550 switch. Want to upgrade and make sure this model supports setting up dhcp servers on it.
View 3 Replies
View Related
Jun 11, 2013
We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
View 6 Replies
View Related
Apr 16, 2011
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies
View Related
Mar 20, 2012
I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies
View Related
Nov 11, 2012
I have some DHCP trouble since I subnetted my network with a 2921. My clinets are in 172.16.2.0/23 and DHCP servers are in 172.16.5.0/24.Sometimes, randomly I guess, I get NACK from my DHCP server, and if I look into DHCP logs I got something like this:
15,11/09/12,09:52:27,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:28,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
15,11/09/12,09:52:29,NACK,172.16.3.172,switchE51D12.host.com,A0CF5BE51D12,,0,6,,,,,,,,
[code]....
View 6 Replies
View Related
Apr 3, 2012
Have a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
View 1 Replies
View Related
May 30, 2011
I have a Cisco ASA 5500 as the main router with a DIR-655 as a wireless access point behind it. DHCP is turned off on the 655 as the ASA is providing DHCP. This worked great for about a year and now suddenly, without any changes, I'm having problems. The only thing that connects without a problem is a laptop, which shows up on the device list with an IP. Other devices have problems. iPhones connect, show an IP on the device itself, but when listed in the connected list on the 655 show no IP. The connection is super slow. An Airport Express will connect, but again, shows no IP in the connected list on the 655. Using the ethernet cable from the Airport Express, nothing can get an IP. I can live with the iPhone not connecting, but the Airport Express not connecting is a major problem. Any reason why this would just stop working one day?
View 2 Replies
View Related
Sep 1, 2011
i want turn on pc in lan & i have not macid
View 2 Replies
View Related
Sep 27, 2011
I Have 15 computer and they all are in Internet Connection.And I Have Network of C class that is 192.168.5.11.But the main Problem is that the computer are not getting ping with each other.How can I get them Pinging between them.Can any antivirus stop them?
View 1 Replies
View Related
Feb 13, 2012
I'm having an issue with my work computer where it can connect to all of the servers in the company accross the country EXCEPT the servers located in New Jersey. I am running Windows XP SP3. I am able to ping the servers and get a response back, but my network drives are disconnected and I cannot open them. I have tried completely uninstalling the driver for my network adapter and reinstalling it with no affect. Mine is the only computer having this problem and I have uninstalled all software that was installed within the past month to be sure. It is ALL of the servers in New Jersey so I know it's a problem with my computer and not the serers. I had a similar issue a while ago where I could ping Google, but could not get to the website, and that ended up being the ZoneAlarm firewall that I had. That was fixed by uninstalling ZoneAlarm and doing an ipconfig /release & /renew. I re-registered some dlls but that didnt work either.
View 1 Replies
View Related
Jun 30, 2012
I currently have one home WWW server running on port 80 which is obviously the HTTP port. If I wanted to run another web server on the same connection, how would I do this? Is it possible? Obviously, I can't port forward the same port for more than one IP.
View 3 Replies
View Related
Jan 16, 2013
I'm having a problem connecting to multiple servers. I do know that I have stopped the windows firewall and taken out Norton and avg, yet I still can't connect to any servers. I've even tried on other networks! I can download torrents and surf the internet just fine though. I can't connect to an online class server to do my homework, and I've also tried to start playing WOW but neither will connect. I also don't see peer guardian 2 in *services*
View 7 Replies
View Related
Jan 27, 2011
When I going to save a php file I got an error message "U don have permission to save it here"
View 1 Replies
View Related
Apr 10, 2013
I currently cannot connect to any game servers or sync my internet time or anything of the sort. I also cannot seem to P2P.
View 3 Replies
View Related
Jul 30, 2012
I've got a digital phone system but it goes VoIP across our P2P T1's. I am having quality issues between our 2 sites only and have decided to setup QoS on the Cisco 1841 P2P routers. each side that does the voice traffic, I would like to do QoS by IP address, instead of by protocol.I will need an access-list, a class-map and a policy-map and need to point the interface to the policy-map
View 19 Replies
View Related
Feb 13, 2011
I am using Win 7.But my cd drive is not working.So can i install iis 7 from any other source??
View 2 Replies
View Related
Oct 13, 2011
I have question about the basics of a high performance application and database server connection to each other. I have two servers, one application and one database server. Both of them are Windows 2008 R2 servers. I would like to connect them. What is the best configuration for quicker communication between them. Is it better to connect them through a network switch? Or directly connect them? Do I need to dedicate one of the ethernet ports on each server to separate their traffic to each other, from the internet connection traffic?
View 5 Replies
View Related
