Servers :: Hostname Redirects To Router Configuration Page?

Mar 13, 2012

My router/modem is a DSL-2740BI created a hostname [URL] At my service provider I was able to create a DNS setting where I specified my routers IP address.In my router I think I created a port forward (TCP port 8080 on both external and internal) with the ip address of a small "web server" (an Arduino module for home automation).When I enter my hostname I get to see my router config page instead of my "Arduino page".

View 7 Replies


ADVERTISEMENT

D-Link DIR-601 :: 404 Page And Misspelled Url Search Redirects

Mar 4, 2013

Purchased a dlink DIR-601, hardware version B1, currently updated to firmware 2.01NA, internet connection works fine, but any time I visit a page that has 404'd I get redirected to [URL] any misspelled url brings me to url...I can't find options anywhere in the config to turn this feature off, it's annoying and intrusive.

I never saw any type of redirection with the old netgear router I replaced, I've tried turning off advanced DNS, no luck. Seems to me it's a feature built into the router, and so, how do I disable it?

View 3 Replies View Related

Wireless Router Configuration Netgear N600 It Redirects To Support Website

Apr 6, 2012

i've been tring to configure our netgear N600 router, it directs me to the support homepage all the time after we half through the configuration and got disconnected at first try. now i've tried clean dns, reset internet settings, nothing seems to work...

View 1 Replies View Related

Protocols / Routing :: Successful Login Redirects Back To Login Page After Satellite Upgrade?

Feb 10, 2012

I have a website account with fatcow. I created the website with Dreamweaver software and uploaded it to fatcow via port 21.My internet connection was via xplornet and I had no access problems. I upgraded to xplornet's new g4 system and now I can no longer access my account online or upload to my website.We have two computers. The first is a desktop system that has the dreamweaver software. The second is a laptop which connects wirelessly. We share the signal through a dlink router. The modem is a viasat Surfbeam 2 residential satellite modem.1. When I attempt to login to the fatcow control panel, the tab shows successfully authenticated and then re-directs me back to the login page. This happens on both the laptop and the desktop.

I have tried bypassing the router and the problem still exists.I took the laptop to the computer center and I can login to the account no problem.I used a free proxy server page on the internet and can login from my home system on my desktop no problem.I have completely turned off virus scan and firewalls. It doesn't work. I have tried IE7, Chrome, Firefox and they all have the same problem. The laptop runs IE8 and has the same problem.I can ping the page successfully. I can traceroute the page successfully. I can't nslooup any site at all. I get the domain not existant message.My ip and dns settings are the automatically find option.I have renewed ips and dumped the dns cache.Using alternate dns addresses doesn't rectify the problem. When I attempt to upload via dreamweaver, I connect but within seconds I get a Dreamweaver message that says "Connection to remote host has been lost. Click refresh to continue" and the log reads "FTP Error. Dreamweaver could not connect to server." I haven't taken my desktop anywhere to try to see if it works on a different network. I'm in a remote location (hence the satellite internet)and it is an hours drive to the nearest private internet connection and a 2 hour drive to the nearest public connection.

View 19 Replies View Related

Can't Access Own Router Configuration Page

Jan 4, 2013

I have a wireless Netgear extender, and can not find set up page..Can't access own router configuration page

View 3 Replies View Related

Unable To Access Router Configuration Page?

Aug 8, 2012

I have the issue of being unable to access my router configuration page. My standard gateway IP (83.226.48.1), does not work, resulting in "unable to connect". If I try with my IPv4-adress, it just comes out with a blank page (Mozilla Firefox and Internet Explorer).

View 17 Replies View Related

D-Link DIR-615 :: Can't Connect To Router Configuration Page

Oct 11, 2011

I have a D-Link dsl 2640u, it's a modem but since it has 4 ports im assuming it's also a router. My problem is that when i enter my ip address into the address bar it doesn't recognize it. I can't use Utorrent or anything that requires ports to be opened..and it's a pain in the butt. when I type ipconfig on my command prompt it brings up..172.16.X.X and when i enter it into the address bar nothing is found. I'd like to port forward by accessing the modem's config page.I read on another thread that i could set my own ip address by going to: Control Panel>Network and Sharing center> Local Area Network>Properties of Ipv6 and typing my own ip address but when i do this i lose my internet connection.

View 14 Replies View Related

ARRIS TG862 - Can't Access Own Router Configuration Page

Nov 18, 2012

I have Time Warner[Road Runner] and an ARRIS TG862 router. I have tried cmd->ipconfig->and connected through the address shown[Default Gateway;192.168.0.1] and have tried an ipconfig/ flushdns -> /release ->renew as well to no avail. Is there anything I could do to access the page? P.S. This was all done through a Windows 7 desktop connected directly to the router through an Ethernet cable

View 5 Replies View Related

Networking :: Access To Modem Configuration Page Through Router WAG54G2

Nov 4, 2011

I have the next config: PC -> Asus RT-N16 router (192.168.1.1) -> LinkSys WAG54G2 in bridge mode (192.168.0.1),How can I access to modem's config page from my PC ?

View 2 Replies View Related

Cabling / Cards :: D-Link DIR-100 Router - Can't Access Configuration Page From Browser

Feb 5, 2011

I have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?

View 9 Replies View Related

Linksys Wireless Router :: WRT310N / Accessing Configuration Web Based Setup Page

Apr 9, 2012

I have Verizon FIOS internet/wireless router and then a WRT310N wireless router connected to it thru Ethernet cable.  I want to disable DHCP in the Linksys, but when I try to access the set up page at address 192.168.1.1 the Verizon router set up page shows up.  I've tried to connect the router directly to the computer, but it needs the internet connection from the Verizon router.  How do I get to the set up of the Linksys at the same time the Verizon is using the same address?

View 5 Replies View Related

Belkin Surf+ N300 Router URL Redirects

Jul 8, 2011

I am experiencing a great inconvenience with my relatively new Belkin Surf+ N300 wireless ADSL router.I am confident that the router has been doing this since I got it, however I have not noticed until now. Whenever I try to access a URL with the word "router" anywhere in it (e.g url...) it will take me to my router's settings page (usually comes up when the router's LAN IP is entered)Yes this is very handy if you don't know the LAN IP, or are less skilled in router management, however if, like in my case, you like to access websites with "router" in their URL, you have a serious problem. I have tried factory resets, and have scoured through the settings of the router but have been so far unsuccessful.

View 4 Replies View Related

D-Link DIR-615 :: Entering Websites Redirects To Router Login

Jan 10, 2013

D-Link Router 615, with Xplornet Satellite Internet <-(internet sucks).

We got the router about 5 months ago and it has been good, few losses of connection and you have to reboot which is understandable. The internet is always random so if the router needs reset/reboot its no problem.

However about a month or so ago its started redirecting constantly once you put a website in the address bar. Its not always the same sites either. Sometimes its google for part of the day, some times the site wont work for a week. It redirects me all the time to the D-Link Router Log In, and no matter how i try to access the website im trying to go to, it redirects me to the D-Link.

View 3 Replies View Related

Linksys Wireless Router :: WRT310N Redirects To Phishing Sites?

May 10, 2012

Ever since I got the WRT310N router, it's had issues connecting to secure websites such as [URL]. I use Google Chrome, and maybe 30-40% of the time when I try to go on the websites, Chrome gives me a warning that it is being redirected to a phishing site. I have tried this with other browsers too to the same effect. My router is secure. I have installed it in different locations as well (once in residence, once at home, to the same effect). 

View 2 Replies View Related

Cisco Application :: 2900 Router WCCP Support For GRE Encapsulated Redirects

May 23, 2012

I've been looking around Cisco's website but I can't find an answer to this -- If the 2900 platform suppots WCCP redirection using GRE? 

View 1 Replies View Related

Cannot Access The Configuration Page?

Jul 17, 2012

I cannot access the configuration page for wifi router... my wifi router is buffalo WHR-G300NI usually access the page via 192.168.11.1but since I have plugged the wire from the internet socket on the wall to LAN port rather than WAN port and disable the DHCP , I cannot access the configuration page and I cannot change these because the ISP told me to do in order to access the internetIs there any other way to access the configuration page?if there isn't, how can I access to the configuration page

View 1 Replies View Related

Can't Connect To Modem Configuration Page?

Apr 8, 2011

I need to access my modem config page which I could access months ago. In Start, Run, cmd, ipconfig, my default gateway is "192.168.1.1". when I type it in Chrome Browser it says Error 324(when antivirus on) and Error 101(when antivirus off). Tried with explorer (cant connect), Firefox(says done and a blank page) and opera, none working.The last time I could connect to that configuration page was like 4 months ago but I think I did something wrong and can't do it anymore.

View 19 Replies View Related

Can't Access Modem Configuration Page?

Jan 19, 2013

I get disconnected from my ADSL2+ connection now and then and it is starting to irritate my a lot so I want to investigate the problem, but I can't access my modem config page. The modem is a Zhone 1511-A1 and the default ip is 192.168.1.1. I tried to reset the modem to isp configs and it did not work. When I ping my address it says "TTL expired in transit". I really don't know what to do next to get into this config[CODE]

View 6 Replies View Related

D-Link DIR-825 :: Configuration Page Becoming Inaccessible?

Aug 17, 2011

I've got the DIR-825 2.02. I had an issue where if you did change the IP adress default 192.168.0.xxx to something like 192.168.yyy.xxx, the configuration page was becoming inaccessible. It was super slow, was displaying the wrong pages with missing images and wrong page formating. I had to reset the router to default and then it was working fine.That seems to have been fixed since 2.05. Now you can change the default ip adress to anything you want and the configuration or setup still work fine.When I am on LAN, the setup page are displayed almost instantly. By remote, it's super slow.

View 1 Replies View Related

Cannot Access Router WRT54GX Web Page / Setup Page?

Jul 28, 2011

i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen

View 2 Replies View Related

Can't Connect To Internet Or Modem Configuration Page

Dec 6, 2011

first off I was trying to change my ip address to dynamic from static, turns out I cant manually, anyways I was messing around with the configuration on my modem page (192.168.0.1) trying to enable dhcp because I know that if it shows that its not enabled yet I get my ip address automatically, it means my ip is static. I enabled a few things like netbios over tcpip and such and something to do with dns routing but I cant recall all I did and in what order because I can no longer get into the config. page and I cant connect to the internet and when I use command promp to renew my ip it says "an error occured while renewing interface local area connection... unable to contact your dhcp server and also an error occured while releasing interface loopback psuedo-interface1 : the system cannot find file specified.

View 2 Replies View Related

D-Link 254 - Can't Access Modem Configuration Page

Jan 29, 2012

I have been trying to configure some settings on my modem and to do so I must access it from it's ip (192.168.250.1). However, when I load that ip in my browser it does not connect.

My router has a private ip of 192.168.0.1 because of a Double NAT issue which I am trying to fix by going to the modem's configuration page. I am pretty sure that it is 192.168.250.1 because that is what my router ISP Gateway says, along with ipconfig in cmd when I directly connected to the modem from my computer.

By the way, I am currently connected through my D-Link 254 router which is connected to my WiMax modem.

View 2 Replies View Related

Routers / Switches :: Linksys Won't Bring Up Configuration Page

Feb 15, 2012

Linksys tried multiple WRT54g routers and access point, 192.168.1.1 can't open the router config page.

View 5 Replies View Related

D-Link DIR-615 :: Configuration Page Is All Greyed Out - Can't Change Channel

Nov 22, 2010

I bought this wireless router the other day in order to get internet access on my Nintendo Wii. I set it up using the CD and followed all the instructions (made a password, wrote down the key, etc.) - and my Wii CAN detect it, but when I type in the key on the Wii I get an error message. I looked online and they said the way to fix that specific error is to "change the channel" on the router to 1 or 11. (It is currently 6). I type in my IP into the browser like I'm supposed to (the default IP of the router), but ALL the options on the page are greyed out and nothing is click-able. Here's a screenshot

View 3 Replies View Related

Cisco Routers :: SRW2048 - Web Configuration Page Requires IE?

Jul 21, 2012

I'm currently trying to setup a Linksys SRW2048 switch.
 
The switch came with version 1.0.0 of the firmware (circa 2005), which worked fine with Google Chrome and Safari on OSX.
 
However, I recently upgraded to 1.2.2 (circa 2009), and the in-built web configuration page doesn't seem to work in anything except for IE6 or IE7.
 
Chrome and Safari give me a whole bunch of resource not available errors, and the page itself doesn't render properly at all:
 
Firefox also doesn't render it properly either:
 
It seems a bit strange on Linksys/Cisco's part that they'd release an updated firmware that meant their switch could only be used by Internet Explorer.
 
Or failing that, are there any known workarounds to get this to work with Chrome, Safari, Firefox - anything other than IE? Or anything on OSX or Linux?
 
Also, I heard that firmware 1.2.1 still works on non-IE browsers - any archives of older Linksys switch firmwares?

View 2 Replies View Related

DSL-2520u - Stop Configuration Page From Appearing On WAN / Accessible Only From LAN

May 9, 2012

I have a D-Link DSL-2520u ADSL2+ modem. When I access the page 192.168.1.1, it prompts for a username and password. Upon successful authentication, I see the modem configuration page.

If I am on a different network, I can also access the modems configuration via its public IP address.How can I restrict access to the configuration page via the public IP address and only allow access via the internal IP address?

View 1 Replies View Related

Linksys Access Point :: WRT 54GL - Configuration Page

Aug 30, 2007

My question is regarding gaining access to my Linksys wireless router configuration page. I recently turned my Linksys WRT54GL wireless router into an access point and since I have done so I am no longer able to access the configuration page for my router.

The problem that I am encountering is not one of connectivity, but rather entry. Prior to turning my wireless router into an access point I was able to connect to the router by means of my browser (192.168.1.1). I am still able to connect to the router, but whenever I type in a user name and password the router just simply does not recognize the information. I have tried resetting the router multiple times, but I am still denied access to my router despite having the correct user name and password. I have version 1.1 of the Linksys WRT54GL wireless router and have the latest firmware.

View 9 Replies View Related

TP-Link 300Mbps Wireless :: WR841N Configuration Page Could Not Be Accessed

Mar 26, 2013

Region : Others
Model : TL-WR841N
Hardware Version : V7.2
Firmware Version : TL-WR841N_v7_120201
ISP :

I recently encountered a problem with my router. It's configuration page is not accessible quickly. When I opened it ( by typing 192.168.1.1 in my browser) it took ages to open and even when it did, the page lacked a lot of features i.e., it did not load properly. Then on a suggestion by a friend, I downloaded the latest correct version (I have an IQ above 60) for my router but the problem persisted. And it is only on my PC. When I access it from some other PC, it opens as it should. My router is only 6 months old.

View 4 Replies View Related

Linksys Wired Router :: Befsr81 Not Updating Hostname Ip?

Nov 4, 2011

i successfully configured my befsr81 router hardware version 3.1 with a dyndns hostname account. how often is it supposed to update? it doesnt seem to update till i login to the router through my browser. where is successfully updates. is there a way to choose how often it updates?

View 2 Replies View Related

Unable To Access Wireless Adapter Configuration Page To Update Firmware?

Oct 25, 2012

My internet connection is fine but I really need to update the firmware on my wireless adapter. I have no problem accessing the router's config page. I ran ipconfig to get the adapter IP (screenshot attached/192.168.2.104). When I type the IP into the browser I get the "cannot display webpage" msg. I have tried turning off the power to the router, disabling Norton's firewall (I disabled Norton completely), and nothing works. Do not tell me to restore factory defaults on the adapter because I tried to get to the configuration page of another wireless adapter I have and am having the same problem.

View 7 Replies View Related

Linksys Wireless Router :: Cisco EA6500 - Hostname And IP Are Not Reachable?

Feb 22, 2013

I have a big problem with my Cisco EA6500 router. I have a domain that is pointing to my public IP address of the home network. I have various computers and applications that listen on different ports for various reasons on this network. Everything worked fine until a week or so ago when I had to restart the router. The reason was that while I did a routine change (add a Mac filter for wireless) the router stopped responding. After restarting it, I could not access the home computers through the domain name (public IP) while being inside the network. If I try from outside my LAN it works fine but when trying from within the LAN the hostname and IP are not reachable. Also, everything works from inside the LAN if I'm using LAN IPs.

View 9 Replies View Related

Cisco Switching/Routing :: Hostname Error On 3925 Router

Nov 8, 2011

I was trying to give the following host name to my 3925 router.Iht comes up with the following error. DRT0(config)#hostname DRT#0 % Hostname contains one or more illegal characters.% Hostname "DRT#0" is not a legal LAT node name, Using "CISCO_000000" DRT#0(config)#

View 2 Replies View Related

Cisco WAN :: 1941 - Configuration / Interface Does Not Appear To Be Getting Any DNS Servers?

Sep 30, 2012

Having a problem configuring my new 1941 Router. The 0/0 interface is attached to my broadband and gets it's ip via dhcp, the 0/1 interface is connected to my lan and has a dhcp pool. My problem is that the 0/0 interface does not appear to be getting any dns servers. So i have either missed something or need to add the dns servers manually to my dhcp pool. Below is my config,

[code]...

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved