Unable To Connect To Router Through Dsl Modem?
Apr 25, 2011
I have 2 computers and 1 printer connected to the dsl modem and another computer and 2 printers connected to a router, I have internet connection to all. the problem I am having is I am trying to add 2 of the printers that are on the router to my pc's but I am unable to locate them also I am unable to log into my router through one of the computers that is connected to my modem directly but I can connect to my router with the pc connected directly to the router.
All the printers are set to share. Is the only way to do this is to connect all the printers to the main PC and then network all the pc's together? I am just trying to connect to all the printers that are on modem and router from any of the pc's connected to modem and router.
View 4 Replies
ADVERTISEMENT
Jan 4, 2011
I just got Comcast ISP and used my own Modem. It's a Webstar DPC2100 R2 Modem and I can connect just fine from Modem to my pc. However, when I add my Netgear WGR614 v6 router into the mix, I get no connection.
[code]...
View 7 Replies
View Related
Dec 28, 2012
I reset my Hybrid modem router's settings back to factory settings cause the disconnects were pissing me off.After a while, It disconnected. I tried reconnecting, but now it's only showing "No Internet access."
View 8 Replies
View Related
Feb 20, 2013
I have been using broadband in my laptop using asus wireless router/modem DSL-N10E for last 2 months but with Ethernet cable plugged in. I have never used its wifi function. I tried today but was unable to connect after entering security passwordWhen look for troubleshoot it says "There might be problem with the drivers for the wireless network connection adapters"
View 4 Replies
View Related
Feb 9, 2011
So I recently just built a new pc for gaming, I can't seem to connect to the internet through my router or directly through my modem. I have connected directly on my laptop and it works and through router and it works.
View 1 Replies
View Related
Nov 18, 2011
I have a Netgear DGN3500 wireless modem router that I'm trying to setup on my Dell desktop "Dimension C521". I get the error message "Ethernet adaptor required". I'm not sure why I am encountering the error message, as I have successfully installed a modem previously on the desktop via a ethernet cable.
View 1 Replies
View Related
Feb 13, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.14.2 Build 120822 Rel.57775n
ISP : BSNL
I am unable to connect my TP-Link TL-MR3220 router with BSNL EVDO ZTE AC8700 modem. Even though my router has the latest firmware version 3.14.2 Build 120822 Rel.57775n, which is the boxed firmware i got with my router. All the time my modem gets Identified by the router, then it shows connecting phase......and restarts the modem.........Repeats the same step every time I try to connect.
View 2 Replies
View Related
Aug 28, 2011
I am having problems connecting to the internet. It has never done this and just started a week ago. I contacted my ISP and they told me it is not the modems fault. I have a modem and then it goes to a Trendnet 100mpbs Ethernet Switch. Then it goes to my primary computer and then to my laptop. They are all hard-wires. I contacted Acer and they said it wasn't a problem with the computer. When I look at the control panel it says "Unidentified Network" and has no other information than that. I already attempted to manually put in the IP I should be receiving from the modem, but that did not work either.
View 8 Replies
View Related
Sep 29, 2011
Since 2 days I can't connect to the modem with my desktop pc(windows 7 x64). I get APIPA as IP adress(169.254.*.*). Tho I can go on internet with my notebook with the same cable I use for my desktop PC.I've also tried direct connection with the modem but it did not work aswell.
What I've done but without success:restore pc (1week)
winsock fix
reinstalling networkcard, then upgraded it
played with networkcard speed(full/half duplex), manipulating mac address
tried static IP
[URL]
View 10 Replies
View Related
Mar 24, 2012
I have a problem with a talk talk dsl 2680modem or the connection? Everything worked fine until I did a facory reset on the pc (running xp),when I tried to install the talk talk internet from the cd, everything seemed fine with the wizard but no internet? the phone also has no dial tone? I am 99.9% sure it is not a problem in the area,I think its a setting problem with the setup.
View 1 Replies
View Related
Jan 7, 2012
I have a Westell 2110 wired DSL modem for Frontier (formerly Verizon). It's not a modem that has a web interface, so I can't log into it to change any settings. It also, to my knowledge, has no bridge mode (which is a term I know very little about). I had an old D-Link WBR2310 router, and since I knew the wireless and the phones ran on the same frequency, I bought a new Linksys e1200 router. Unfortunately, when I went through the setup of the router, while I know I have a solid internet connection from the modem (I'm hard wired in as I type), and while I can connect to the router, I am unable to connect to the internet. I took down my IP address, DNS servers, subnet mask, and default gateway, and set up the router to run under a Static IP, which it does phenomenally. Unfortunately, when the ISP (via direct line or my modem) changes the IP address after a few hours, my connection drops and I have to go reset up the connection via a hard wire, taking down the information, etc. Why is this the only way I can set up my connection? What could I be doing that I'm not to get it running DHCP correctly? It worked on my WBR 2310.
View 2 Replies
View Related
May 19, 2013
I am unable to connect a Wifi Modem wiith 2960 Switch having VLAN 1,Attached is the network diagram,what configurations i have to modified it,I need to Connect A Wifi Modem on VLAN 1 ,Connectivity is working fine between VLAN 10 and VLAN 1.What should be the next step to Connect Wifi Modem to VLAN 1 so that Users on VLAN 10 should connect to Internet.
View 14 Replies
View Related
Aug 23, 2011
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies
View Related
Feb 7, 2012
I have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies
View Related
May 2, 2011
i am unable to configure my netgear router with my clear modem
View 1 Replies
View Related
Jan 16, 2013
I want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies
View Related
Jan 7, 2013
how to connect the router to the modem?
View 1 Replies
View Related
Sep 12, 2011
For several years I was connected to the internet via a USB modem (with TalkTalk being my ISP), however, after purchasing a laptop with Wi-Fi for my partner's daughter, decided it was time to get a router so we could all use the internet.I purchased a Netgear N150 Wireless ADSL2+ Modem Router, model DGN1000, connected (via ethernet as the desktop has no wireless receiver) and installed it as per instructions supplied.However since that point I have been unable to connect to the internet on my desktop through the router. Wireless devices (several laptops, iPhones and games consoles) have no issues whatsoever in connecting and using the internet.
At first the desktop kept saying that I had "limited or no connectivity" which I eventually sorted out, there was some kind of issue with my IP address, but I can't remember what now. Now I when I try to load any website, Internet explorer tells me it couldn't load the page due to .... Google Chrome is more specific and tells me that the DNS lookup failed. I have tried updating the ethernet controller driver, using the 'flushdns' command, and after discovering many other people on TalkTalk tech forums having similar DNS issues, tried using DNS addresses that were suggested by both their support staff and members of the public (i.e. Google's DNS 8.8.8.8), and still nothing. If I reconnect my USB modem I can connect to the internet no problem, but I'd prefer to only have one modem on the go.I am running a HP Pavilion with Win XP (SP2), and all the laptops that have connected wirelessly (including the one I'm using now) are running Vista.
View 8 Replies
View Related
Sep 11, 2011
When I attempt to connect my new laptop to it and enter the security key/password, it does not accept it.I was able to connect the computer I had before to the router.How can I connect my new computer?
View 9 Replies
View Related
Jan 12, 2013
I ordered the D-link DIR-815 router online at [URL], and I'll be receiving it this Monday which is the 14th, so I am asking my questions on here now, so I could be prepared.
1.) I don't have a wireless card in my PC, so I will be connecting wired to get WiFi via WAN and LAN ports, right? First before I forget, I have a Windows 7 32-bit desktop PC. We are working with a DSL modem residential line without phone line using a coaxial cable, and Ethernet cable from modem into the PC. connecting this D-link router to my modem and WiFi, and for me to use the WPA2 security?
2.) I have an iPhone 4 with Verizon. If I want to use my iPhone to get WiFi from the router, and turn off the Internet on my phone, and use WiFi only on my phone, how would this work?
View 6 Replies
View Related
May 20, 2012
Last night Comcast reset our modem (from afar) so we could get a free movie to work. After that, we got the movie but my wireless internet now does not work. I can connect when attached to the cable modem but when I plug into the router I don't have access to internet.The router is plugged in and all lights are working (it acts normally otherwise). Also, our landline phone (which is in the bundle of the cable connection) does not work either.Comcast is willing to look at the phone but refuses to get involved in the wireless thing.What the heck is wrong?
View 1 Replies
View Related
Apr 20, 2013
I just bought a brand new computer and I plug everything in, including the ethernet cable used on my previous computer. This cable is plugged into a wireless router, which in turn is plugged into a modem giving it Internet. So yes I understand this part. But on my new computer it says "Not connected, and no connections available." I then plug the computer directly into the modem, I in turn receive Internet beautifully and quite quickly. But I cannot keep it like this because I need the wireless router for other devices. So I set everything up back the way it was and my other devices work! Even other plugged in one's that aren't wireless, but still not this new computer.. What do I do
View 1 Replies
View Related
Dec 11, 2012
How do you connect a usb modem to a wireless router?
View 1 Replies
View Related
Feb 15, 2013
I can connect to the Internet when my laptop's connected directly to the modem but not through my wireless router. My laptop can connect to the router, but then I have no Internet access. (I've tried resetting my router and modem.[CODE]
View 1 Replies
View Related
May 3, 2012
I have a question regarding the network setup. I have 3 pieces of network hardware and a fast dsl connection. The hardware is:
- DSL Modem from my provider with static IP connection (CISCO - don't know the symbol)
- DSL Router (edimax ar-7084a)
- Switch (Hewlett-Packard JD871A)
Now the task is to create a LAN network so all my computers can talk together and have a internet connection shared between them.When I connect Modem to Router and then 4 CPUs to router, it is working fine. The problem is that the router has only 4 ports and that it is 100Mbit slow. I would like to use the HP switch for the LAN setup (1Gbit) and then connect the switch to router and router to modem. But it doesn't work I cannot establish internet connection this way. I'm setting all the settings in my router but it doesn't work as it was in simple setup modem->router->cpu. when I add switch to this, the setup is going berserk.Problem is that I would like to create a LAN only between computers using switch. I have other computers that I want to conect to the router directly and don't see the computers using switch.
View 7 Replies
View Related
Oct 19, 2011
This may seem blatantly obvious to some of you, but is it possible to connect a wireless router wirelessly to a wireless dsl modem. Due to geographic issues in the building, I would like to prevent running a cable from A to B if possible.
View 4 Replies
View Related
Oct 3, 2012
I have a cable line internet connection on my desktop.i want to share this connection to my mobile and laptop through wireless router.my question is which is the best router for this purpose netgear n 150 or belkin n 150 ?do i need a modem to be connected with router?
View 1 Replies
View Related
Aug 31, 2011
I just got internet and cable at my apartment the other day. My roommate and I got Cox Cable and my roommate had a used Linksys router to connect to the modem. I'm not sure how the Linksys was set up (I'll get that information soon), but the internet worked for her without her having to connect her laptop to the router. When I tried to use the wifi, I was never able to connect properly. It would say that I was connected to the router, but that I wasn't able to use the internet. Then I tried to connect the laptop to the Linksys router with a ethernet cable and the internet worked. Also, after I unplug the ethernet I am able to use the internet, but the connection goes out every so often. I also wanted to use my PS3 with the wifi, but at this point I doubt it will work unless I find some solution. As for specs, the Linksys is a Model # BEFW11S4 ver. 4. Oh, and now my roommate is having the same problems now.[CODE]
View 4 Replies
View Related
Jan 10, 2012
trying to set up my router from the qwest modem
View 1 Replies
View Related
Aug 6, 2012
Last week, a big storm rolled through my town while I was out of the area on business. I had a working LAN/WLAN for my home & home office, and the modem I was using got fried by the storm. Strangely enough nothing else was affected..Anyway, I went out and bought an identical modem, and had it set up with Comcast. If I connect directly to the modem, everything works perfectly. But when I try to attach my router to the new modem, I have no connectivity over wifi OR hardwired to the router. According to the status light on the router, it can't find a connected modem.I reset the router back to factory settings, installed the newest firmware, and moved my DHCP pool out of the default range. I then power cycled the whole setup - twice - with no success.
View 5 Replies
View Related
Jan 9, 2012
I bought an ASUS Black Diamond Dual Band Wireless-N 600 Router (RT-N56U) to upgrade from my older router but I'm having a problem: It won't connect to my cable modem (via the WAN ethernet port), so I can't connect to the internet. [URL]
When I connect the router to my computer via ethernet cable, the light on the ethernet port of the router comes on (an orange LED light), but when I connect my cable modem (or computer) to the the router through the WAN ethernet port, the WAN port's LED does not come on at all and I keep getting an error message on my browser saying that I need to make sure the ethernet cable is connected.
I've tried three different ethernet cables, including the one that came with the router, with no luck (WAN LED lights never come on, so I assume that this means that there is no activity at all). I've also tried cloning the MAC address, restoring to factory default, updating the routers firmware, and holding the reset button on the modem for 15 seconds, among other things.
Also, something that might be worth noting: While one end is connected to my modem, if I plug the ethernet cord into one of the 4 ethernet ports on the router, the green LED instantly turns on but, as I said before, there's no activity when plugged into the WAN port. My modem is an Arris TM052G (DOCSIS 2.0) provided by my ISP, Time Warner Cable.
View 4 Replies
View Related
Feb 18, 2012
Yesterday I had to move the computer desk to paint the wall behind it,which included unplugging the router and modem.There are four computers in the house,three on wireless, and after I hooked everything back up the pc in my room and the hardwired one reconnected to the router and internet just fine.My brother's pc and my laptop though can't seem to connect, they attempt to connect but just say they can't connect.
I work at the Staples Easy Tech center and the resident tech there told me to do an IP flush or some such thing, but my google fuu is weak and this "ipconfig /release" and "ipconfig /renew" refuse to do anything without a connection to the network.I proceeded to hardwire my laptop and even then it says no internet connection and doesn't recognize the network. I already power-cycled the router.Maybe power-cycle the modem?Reset mac addresses?
View 14 Replies
View Related
Jun 4, 2011
My New comcast cable modem will connect to the internet, as i am connected to it by ethernet right now, but my netgear router will not recognize it and get a link to the internet to get my existing LAN back up.
View 3 Replies
View Related
